Receiver is not below the sender
HI
IN FM
WHEN IAM GOING TO DISTRIBUTE THE ORGINAL BUDGET IAM GETTING THE
FOLLOWING MESSAGE.
Receiver is not below the sender.
WHAT IS MIGHT BE THE PROBLEM.?
THANKS
MALA
SOLVED
Similar Messages
-
I want to delete my mobile me account not just from my iPhone but from existence. I want to delete it so that no emails can be received to it, and the sender would receive an undeliverable message. Is this possible?
No, you can stop using the account, but you cannot delete it.
-
Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach, security, save line there. Then when I click File, then Send now it will not send. A message comes up saying my SMTP server failed. Have check and everything appears to be o.k.
Hi Stephen,
What version of MS Office are you using?
Are you facing the issue similar to that mentioned here: Acrobat/Reader: Attach to Email button not working for PDFs referenced from long URLs
Open Acrobat. Use the click-path Edit - Preferences - select the Category "Email Accounts". In the dialog there is the "Add Account" drop-down. Select "Add Other". The "Add Webmail Account" dialog presents. You'll fill out the dialog's fields with Outlook.com settings. (don't forget the "Advance Settings" button)
From a look-see on the web it appears that the following are the needed settings. BUT, you'll be wanting to validate.
The Outlook.com SMTP server settings for sending outgoing messages from an email program on desktop, cell phone or mobile device are:
• Outlook.com SMTP server address: smtp.live.com
• Outlook.com SMTP user name: Your full Outlook.com email address (not an alias)
• Outlook.com SMTP password': Your Outlook.com password
• Outlook.com SMTP port: 587
• Outlook.com SMTP TLS/SSL encryption required: yes
For incoming messages from an Outlook.com account to an email program using POP, use the Windows Live Hotmail POP3 server settings.
The Outlook.com POP server settings for downloading new incoming messages to email program, cell phone or mobile device are:
• Outlook.com POP server address: pop3.live.com
• Outlook.com POP user name: Your full Outlook.com email address (not an alias)
• Outlook.com POP password: Your Outlook.com password
• Outlook.com POP port: 995
• Outlook.com POP TLS/SSL encryption required: yes
Regards,
Rave -
I can not download the last Iphoto update that I already purchased it by app store, and in the actual version 9.4.3 it does not work the sending photos by e-mail.
Thanks for your replay,
Finally the Iphoto 9.5 was installed...any way ..I had to go to app store to purchase it because the previous version did not updated autimatically... only shoed me that there is a new version ...but it guided me to the app store to purchase it.... and I did it because I did not know that the up date was free...and the sistem did not adviced me about that...
I have the last up date of os x 10.9 already...
in this new version I have no problem to send the photos by e-mail... but in the previous one it allways showed me an error message like ¨I should try later because the server does not work¨ but I tryed with 4 differents e-mail account that worked perfectly in the app Mail.
any way, this new version is ok..
thenks a lot
Damian from Buenos Aires -
In iOS7 the titles of movies are NOT below the films
In iOS7 the titles of movies are NOT below the films. I have 24 work demo films that I have made on my iPad and and now I have to search through them one by one to find the title in the current design. How do I get the titles back?
They all start with the name of my company ... and then the subject so a "The" has to be accounted for.
iOS7 is not shown below as an option!I'm right there with you guys. Same problem. I'm repairing permissions with the disk utility to see if that helps. I'll let you know.
-
How can I back up an iphone when I haven't set the phone up for back ups & the touch screen doesn't work? The phone can receive calls (not answer) & the pictures & messages can be seen but the touch screen doesn't work to unlock the phone or select anything. We want to save/transfer pictures, contacts, and music to the replacement phone.
Try backing it up to your computer with iTunes. Connect it to your computer, open iTunes, click on the name of the phone in iTunes, go to the Summary tab of your iTunes sync settings and click Back Up Now. Also go to File>Devices>Transfer Purchases to transfer you apps and other purchased media to your iTunes library.
-
Was installing new ios 7 and it asked for acct and password. it did not like and said it would email a new password. no email received. can not figure the Apple support screens to find a phone number to call. help.
No need for alarm. There are several folks a day posting like threads. Most folks know these phishing attempts for what they are and merely delete with prejudice.
To the bottom line... if you wish - and I am sure Apple will take notice - you should FORWARD the email to [email protected] and delete.
CCC -
How can i make apple mail dislay message body to the left not below the mes
How can i make apple mail display message body to the left not below the messages
headers pane ? something like outlookThere is a plugin to do this in Leopard but currently its not compatible with SL however you might like to try the beta release which has preliminary support for 10.6:
http://www.macupdate.com/info.php/id/21899 -
How can I use airplay if my receiver does not have the small audio jack?
I have a harmon kardon receiver for surround sound, but it does not have the small audio input jack to hook to my small apple airplay. Any ideas? should I just us the LAN plug from my receiver to airplay and try to connect itunes to it?
Or, can I just attach an old ipod to the stereo and leave it there as a hard drive for my itunes?
Thanks!You will need a cable similar to the link below.
Mini Jack on one end and a pair of RCA jacks on the other.
http://store.apple.com/us/product/HA832ZM/A/belkin-rca-stereo-cable-2-m66-ft?fno de=72
These can be purchased at Wal-Mart etc. for about $6
If you have an Apple Airport Express, that is what you need. -
Body of email displayed is not from the sender in the header
I could not find anything about this in a search, and a visual scan of the discussions.
After two weeks of being shut down (vacation), and occasionally during that time accessing email through dotMac, I encountered the following when I restarted my home desktop.
Some of the emails have a body and a heading that do not match. The body, whether HTML or Rich Text, is clearly from a different email than the header. And, to emphasize, this is not ALL the email, only SOME of them (I cannot discern a pattern here!).
The same emails display just fine through the online dotMac Safari window, the body being from the corresponding sender (I keep them stored on the server).
So, something happens to SOME of the emails when downloading from the server to my computer. This body/header incongruity still happens to SOME emails that come through now, days after the initial restart.
Perhaps related - there were a lot of emails to download/sync. Mail crashed OFTEN until the accounts synced with the server. (I sent MANY crash reports to Apple). I worked through dotMac Mail in Safari to delete/read/respond/etc.; Mail finally quit crashing when the number of new emails was greatly reduced.
Observations? Solutions? Please Help!No, I have never had a response that even offered a suggestion until just today. The problem never "self-corrected" - even though I use IMAP, those emails, when displayed on my computer had the incongruity between the header and the body as I described.
Since it has been up and going, all subsequent emails have been OK. It was just that initial restart/sync after the desktop had been shut down, for several weeks, and I had accessed the mail online while gone.
I see there is a post after yours about trashing the plist. Maybe I'll try that, but it seems to not be an issue now. -
Sometimes when sending or replying to a message through face time my send button does not work. If I close the app and reopen it the send button has worked but not always. This is very speratic.
Hello cjtulowiecki,
You’re having problems with the computer not booting sometimes.
Do a hard reset.
Power off the computer.
Remove the power cable and the battery.
Hold down the power button for 15 sec while booth power sources are removed.
This should reset the hardware in the computer.
Next test all the hardware in the system.
As you power it back on tap the F2 key. This will load hardware diagnostics.
Run the startup test.
Clicking the White Kudos star on the left is a way to say Thanks!
Let me know how everything goes.
Have a good day. -
How can I view/sort by email address not be the sender's name
These days people often send emails from different devices and sometimes their display name is different on each. When I receive an email from them it may have their display name, or if this has not been set on say their phone I just see their email address. But when I try to search or sort it does not look at the underlying email address just the display name and so it appears like some of the emails are missing. Is there any way to view messages by the underlying email address and not their display name or what has been saved to my address book.
Thank you - MarieThis add-on lets you display the senders' or recipients' email addresses as a column in the Threads pane (message list):
https://addons.mozilla.org/en-US/thunderbird/addon/show-address-only/
[http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html How to install]
Right-click a column button to select which columns are displayed, and click a column button to sort the list by that column. -
Have hotmail account on mac that will receive but not able to send. BT broadband
Hello out there, I am looking for help.
Very frustrated with hotmail account on imac. Since December 2013 I have been unable to send emails from my imac on my hotmail account. I receive them but cannot reply. If I sign into hotmail via safari I can send but there is no record of all my old emails. Totally helpless with computers and feel I must have done something wrong but cannot find how to put it right. Is it something to do withhotmail - outlook and my bt home hub router. Any suggestions welcome.See the Troubleshooting sending and receiving OS X mail support document. Based on your description, your SMTP sending path is likely misconfigured. Either the user or password or SSL or not (SSL almost always on), or the server specification is incorrect. The SMTP sending path is not the settings that you'll first see in Mail.app preferences for the account and what you've probably reset dozens of times, that's the POP or IMAP receive path that you can see. The SMTP send path is buried beneath the Outgoing SMTP Server "edit SMTP server" setting within the Mail > Preferences > Accounts preferences settings. Anyway, follow the troubleshooting document, and confirm that your settings match those from your mail ISP.
-
Any way to not include the sender on their own email if they're in a distribution list?
Howdy,
If my team has an email distribution list, and I need to email everyone else on the team, is there any way to set something so that the person sending the email doesn't get their own email back if they are on the list they are sending to?
Currently, if I send an email to our "IT" list, and I'm on the "IT" list, I get a copy of my own email sent back to me. This seems silly to me. I know I've used some program in the past that was smart enough not to do that
but I don't recall if Exchange/Outlook has the ability to not do that.
Thanks.Howdy,
If my team has an email distribution list, and I need to email everyone else on the team, is there any way to set something so that the person sending the email doesn't get their own email back if they are on the list they are sending to?
Currently, if I send an email to our "IT" list, and I'm on the "IT" list, I get a copy of my own email sent back to me. This seems silly to me. I know I've used some program in the past that was smart enough not to do that
but I don't recall if Exchange/Outlook has the ability to not do that.
Thanks.
An outlook rule or hub transport rule to delete messages sent from you should do it. In the old Exchange/Outlook days, it didnt do that, yes.
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.
Well, I'd want to do this globally at our company, not just for myself.
I dont think there is any easy way to do that then.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
I use godaddy web mail for email address "[email protected]" In the past, when I would click "Reply" to reply to an email, a window would open and the recipient's email address would autofill in the "To:" box. Now it does not. I checked on Internet Explorer, and it works there, but again, not on Firefox. Also in the past, when I would initiate a new email, as I started to type the addressee's email address in the "To:" box, it would autofill from my address book into that box. Now it does not.
I believe the Apple Help information is incorrect. This has never worked this way for as long as I've used it, and I don't believe it ever was intended to work that way. I'd say it's a case where the writers of the Help documentation meant one thing and phrased it incorrectly, and it slipped through the proofreading process all these years.
Mulder
Maybe you are looking for
-
Return key not creating a new line when using the horizontal text tool
Going through the adobe after effects 'classroom in a book' examples - when writing a line of single line using the horizontal text tool pressing return does not create the next line underneath, the cursor stays on the same line? Anybody out there ha
-
Hello, I have a new WinXP computer with CS3 Master Collection and Quicktime 7.2. When I export a movie (file > Export Movie) the progress bar moves all the way to the end and hangs there. I never get my completed file. I can see a .dat file, but the
-
When a client license is purchased, does this allow the owner of the license to load and use any and all of the client code on the CD (including sqlplus, Net8, admin tools, etc)? In my case, my customer has purchased the 8.1.6 NT Client and has a dat
-
Help
-
Selecting microphone when capturing video from the webcam
Using Final Cut Pro X I want to capture video from my webcam into Final Cut. I have a USB microphone (Yeti) with which I want to record the audio. I cannot find an option to select my input source for audio when capturing this footage. Final Cut s