Recipient Management - Appears to be bug

Exchange 2013 CU3 - Recipient Management role group has rights to set "Send As" to Distribution Groups, Room Mailboxes, User Mailboxes, however NOT Shared Mailboxes. Is there a workaround I can get done for this?
Thanks,
Don - Intellys

Hi,
Verified whether the AD Permission “Send-As” is added to the “Recipient Management role group”. If so, temporary remove it and see whether it works.
Thanks,
Simon Wu
TechNet Community Support

Similar Messages

  • My previous recipient list appears to be corrupt. When I attempt to access a particular entry to list or delete it hangs. Is there a way to just clear the history?

    My previous recipient list appears to be corrupt. When I scrool through the list it hangs on one partially completed entry. I assume the system crashed some time back and left this entry. It is a little inconvienent at times since some addresses won't auto complete. Any suggestions on deleting entries or clearing the whole list since using the normal procedure to delete an entry just hangs.  Thanks

    What happens if you select all then click "Remove from List"?

  • Volume Activation Management Tool invalid characters bug.

    I have a Multiple Activation Key from my Technet subscription for Windows 8 Enterprise, and wanted to
    find out how many activations I am allowed, and how many I have left. I was advised by a colleague to
    download and install the Volume Activation Management Tool 2.0 from Microsoft.
    Whilst using this tool, I've found what appears to be a rather serious bug. It does not allow entry of the
    product key I wish to manage. If I copy/paste the key under Add Product Keys, it deliberately ignores
    one of the characters in the second section of the product key, specifically the letter N.
    If I attempt to enter the key manually, it says Invalid character in the product key when I come to this
    particular letter. On further investigation, VAMT 2.0 sees several other letters as invalid characters.
    It wrongly says all of the following letters are invalid characters - A - E - I - L - N - O - U - S - Z .
    This bug makes it impossible to add the product key, and almost impossible to add any other key.

    Hello,
    Which problem are you referring to?
    The first issue was with VAMT not recognizing some the characters in the newer product keys, the solution for that is to use VAMT 3.0 or preferably VAMT 3.1 now.
    the second issue is the prompt to create a database and all you need to do is enter a name on the database line and it will create one( leave the Server line alone.)
    Thanks, Darrell Gorter [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights.
    Tried that ... it doesn't work. I type my machine name into the Database line and after a few seconds I get this . . .
    Running SQL Server Express, the server name is listed as DJGMPC/SQLEXPRESS, so I put that in the Server line
    and type the machine name DJGMPC in the Database line, and VAMT finally establishes a connection with
    this SQL Server that shouldn't really be needed in the first place, when VAMT2 managed OK without it.

  • SENDING AN EMAIL USING BCC AND RECIPIENT NAME APPEAR IN TO FIELD

    I'm sending and email to several people using the BCC field.  However, when the recipients receives the email, I want the recipient's name to appear in the TO field and the recipient not know the email was sent using the BCC.  Right now, the
    recipient knows it was sent BCC because their name is not appearing in the address fields

    Hi Vinay,
    You can use action defintions to send emails to your employee responsible.
    for that pls check action profile 'Order_Messages' and within this, action definition
    'ORDER_CONFIRMATION'.
    Check in there. Partner funtion is assigned to it, in second level customizing and smart form to be mailed in third level customizing.
    Prerequisite: emails should be maintained in BP master.
    For your requirement you can  do following settings:
    In second level customizing(i.e. selecting the action definition and double click on the same)
    Enter the partner funtion of Emp. responsible. in 'Partner Determination for the Action' Details. and check 'Partner Dependent'.
    Secondly, in details for 'Action Determination and Action Merging' in 'Action Merging' details select 'Max. 1 Unprocessed Action for Each Action Definition.
    Save the settings.
    Schedule the actions using action scheduling.
    Best Regards,
    Pratik Patel
    <b>Reward with Points!</b>

  • Campus manager 5.0.6 bug

    Hello,
    I'm hitting bug CSCtd49439 detailed below after i upgraded my campus manager to 5.0.6. the workaround didn't work in my case and i need the patch without opening a tac case, where can I find it???
    Regards
    Data Collection never completes, and UT acquisition  cannot run
    Symptom:
    Campus Manager Data Collection does  not stop. It is reported as always
    running in
    Topology Services.  Additionally, User Tracking acquisition does not run due
    to XML files 
    being written.
    Conditions:
    This will occur if  there are any standalone Access Points being managed by
    Campus
    Manager.  Other devices can also cause this (e.g. old 1200 series  switches).
    Workaround:
    Filter out standalone Access Points  and other affected devices from Campus
    Data Collection
    under Campus  Manager > Administration > Data Collection > Exclude Devices.
    A  patch is available by contacting TAC.

    "I understand I have to open a tac case to get it but the problem is that; being Cisco Gold Partners, my company has a limit on the numbers of tac cases to be opened and there are lots of patches and software that is only available through tac? can I unsertand why? IS this a Cisco Policy?"
    Yes, it is and this is an old discussion with Cisco and I stopped it sometimes in the past; The only argument for you might be - "it is the same for all Cisco partners...."
    It has some aspects, I am not sure if Cisco is aware about..
    See this situation:
    If you have an issue discussing it here on the forum e.g. with jclarke and it reveals to be a LMS bug and jclarke writes a patch for it, it is clear to open a TAC Service Request to get the patch (the patch is not tested yet and TAC needs to have the possibility to keep at least a statistical logging about the issues).
    But know the ridiculous part starts - the case will get accounted against your account because the bug ID yet exists. edit: Only  Bug IDs generated during the follow-up of a case won't get accounted. Only if a NEW Bug ID is generated during the follow-up of a Service Request will result in the fact that the SR is not accounted. So beside the fact that you have to deal with parts of LMS which are not working you receicve a kind of penaltiy for helping in making LMS functioning correct....
    Once, I stopped informing Cisco about the issues I have found within LMS because of this penalty, but when jclarke started in this forum it was worth again announcing them and discussing those things...- because there is real help and a prospective solution
    But I think it is somewhat embarrasing for Cisco to put an imposition on people/companies who found bugs instead of giving somekind of reward or only a short  "Thank you...."
    Nachricht geändert durch mermel

  • How to I stop Adobe Application Manager appearing and asking me to sign in every time I open a Creative Cloud application?

    I'm all up to date and I've even tried uninstalling and reinstalling all my Adobe software. I'm on a Mac using the latest version of OSX. The issue has been happening since I switched to a different Adobe ID about a week ago.
    Thanks

    Thanks for your reply. I've tried removing 'OPM.db' a few times now, restarting etc but I still have the same problem. The Application Manager still appears every time I open a CC app.
    It appears twice when I open a CC application - the first time it asks me to sign in. Upon signing in, I get a 'Thank you' message. Then after the application has loaded it appears again telling me 'Don't let a good thing come to an end' and gives me the option to either 'License the software' or 'Start Trial'. I choose 'License the software' and I have to sign in again. I then get another 'Thank you' message!

  • Application Manager appears to have installed two copies of Pro

    Hello,
    It apppears that the Application Manager has installed two copies of Pro Xi each taking 1.9gb each.
    If I uninstall one off them they both are removed.
    Re-install with App Manager and I get two copies.
    4gb of disk space for Pro????
    Running Windows 7.
    Thanks
    Jon

    Doesn't appear that there are two folders but take a look at how it shows up in the program manager.

  • W510 Power Manager appearing twice in Taskbar, machine freezing!

    Lenovo W510, running WIN 7 Professional, 64 bit. Machine is configured as 4318CTO. Very frustrating problem, machine fires up and runs great but within 30 minutes CPU monitor indicates high activity for no reason, temperature rises, two battery icons will appear in taskbar and machine will lock-up. I have to Ctl-Alt-Del and restart in order to work around. After a re-start machine appears to behave normally. I originally thought problem was overheating, opened up machine and re-pasted internals, not the problem. I'm guessing (layperson) that somehow two PM's (software) are getting enabled? My BIOS is 1.45. The Power Manager Software is V6.67.5. The Power Manager Driver is 1.67.10.17. This includes a (twice sent) Windows PM patch, no KB number associated with either of them. Machine is normally docked. I uninstalled Windows KB3035583, to halt the Windows 10 install. Sticking with WIN 7 for now. I can't be the only person with this issue. Can anyone point me in the direction of a solution? I need this machine for work, don't want to "experiment" on behalf of Lenovo. Thanks for your advice!

    ColonelONeaill: No: When I open Task Manager I do not see any processes that match the indicated load as per the temperature monitoring tools (add-a-gadget) I am using. Could be transitory, and not immediately indicatable, but suspect the CPU loading is happening at a level "deeper" than what the Task Manager reports. I could be wrong (I wish I was) but haven't caught this yet....

  • PXE boot OSD connects to Internet-only Management Point. A bug?

    So here is the deal: SCCM registers the Management Points to be used in DPs PXE in a Registry file, it is done in alphabetical order (or install order), so all PXE boots will always connect to the first MP (Microsoft, WTF?). In my case, the first is an INTERNET
    ONLY MP, why would PXE Booted OSD connect to that? Brrr..
    Solution is to edit the registry, put the MPs in the right order and then it works like a charm.. until some SCCM maintenance task overwrites it with the default MP list, including internet only MP as first.
    MPs don't respect boundaries and I cannot just block the ports (OSD will be slow, it first tries to connect to the internet MP, times out, then uses the next one).
    A) This behaviour is a bug. PXE Boot should NEVER connect to Internet Only MP (OSD is not supported for IBCM).
    B) Does anybody know what maintenance overwrites the DPs registry key "ManagementPoints"?
    I cannot just use one MP. All external MPs are configured for internet only, internal MPs are configured intranet only. 
    Ideas?

    The distribution manager on the site server is the component that populates the MP list on the registry of DP/PXE.
    Dist mgr currently writes all the MPs and does not filter-out the internet-facing MPs.
    Even if you manually edit the registry on the DP, dist mgr will over-write it the next time it updates the DP. You can try to put an ACL on the registry key which prevents the site server from updating it. However, the DP will never get updated by the site
    for other things.

  • Why Doesn't Startup Manager Appear?

    hello all,
    i have created a clone of my power mac g4's "Macintosh HD" drive (with os 9.2.2 only) onto a single -volume/unpartitioned external firewire drive. i have been able to successfully boot into os 9.2.2 from the clone by setting the external fw hdd as the startup disk in the "Startup Disk" control panel and restarting.
    my question is, how come "Startup Manager" does not work for me even though i do exactly what is instructed in this apple support article
    the first time i set the startup disk to the ext fw hdd , i just restarted like normal (without holding down the option jey). the cloned os booted perfectly fine from the ext fw hdd as i configured it to.
    then i tried to see if i could select a startup disk using startup manager (restarted; holding option key). all i got when i held down the option key was a flashing floppy disk icon with a question mark on it. after a few seconds of the flashing floppy disk, the machine booted up into os 9.2.2 from the original "Macintosh HD" drive (even though i had configured the ext fw hdd as the startup disk).
    then i tried it again by shutting down the machine then turning it on again while holding the option key. this time, as i held the option key, the smiling mac appeared (ignoring the fact that i was holding down the option key) and booted up like normal using the clone on the ext fw hdd that i configured in the control panel.
    what am i doing wrong? according to the article, my power mac g4 (agp graphics) with os 9.2.2 is expected to have a working startup manager. thanks in advance for your help.
    many thanks
    power mac g4 (agp graphics)   Mac OS 9.2.x  

    Some third party keyboards don't bring up the Startup Manager when holding down the option key. Thought it was worth a shot, anyway.
    Good luck.
    PM G5, PB G4 17", iMac G5 20", iPod 5G 30GB, iPod Nano 1G, iPod Shuffle 2G   Mac OS X (10.4.9)   AirPort Extreme (new) WDS with AirPort Express

  • My bookmarks folder appears in the Bookmarks menu, but bookmarks do not appear when clicking "Show All Bookmarks." Bookmark Manager appears, but shows no bookmarks at all.

    When opening the Bookmarks menu, I see my bookmarks folder in the dropdown and can access them from there. However, if I click "Show All Bookmarks" the manager launches, but shows no bookmarks of any kind. No defaults, folders, uncategorized links...nothing.
    As such, I can still use the bookmarks while surfing, but I can't organize, delete, or export them since they don't show up in the bookmark manager.

    This can be caused by a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • Performance Manager appears Error 2 in extracted graph - MDS9513

    Hi Experts,
    I took a graph from ISL links and appears : Error when put mouse on top appears Error 2, the picture of graph in attached
    What kind of erros are these?
    Could you help me?
    Tks,
    Wellington

    Hello,
    Anyone have some tip?
    Tks
    Wellington

  • Batch Management appearing mandatory in material master

    Dear Friends ,
    I am getting batch management tick mandatory while creating material master , In OMS9 for field sel grp optional 01 ,I have made field reference for mm01 as optional, but still its showing batch management  mandatory while creating material master
    Thanks in advance

    Hi,
    If you have checked Field reference  ROH ( as material created with material type ROM & ROH assigned Field reference  ROH),the field selection group 75 optional entry.
    Then , now check *Field reference for material master in assigned to industry sector( the material created with) in t.code: OMS3 and here also make selection group 75 optional entry for *Field reference for material master in OMS9
    Also make selection group 75 optional entry  in OMS9 for for Field reference MM01 & 0001
    Now try creating material master.
    Regards,
    Biju K

  • Action Script 3 and Color Management on PowerPC macs - Bug

    Dear Adobe,
    Recently I re-skinned my website and incorporated Actionscript 3 & Flash 10 so that I could incorporate Color Management for my images. I used sRGB as the image colorspace. On Intel CPU PC's (Mac and Windows) the website and images look good - as expected - on any browser (safari, firefox, ie). But, on PowerPC based Macs the website looks AWFUL. There is a blue/green tint across the whole webpage and the images look super saturated and whacky, regardless of browser (firefox / safari). Both powerPC macs I tested with are running OSX 10.5.7 and have Flash Player 10 installed.
    Can you explain why this is happening? See for yourself - http://www.stoqq.com
    Regards
    Nik.

    Dear Adobe,
    Recently I re-skinned my website and incorporated Actionscript 3 & Flash 10 so that I could incorporate Color Management for my images. I used sRGB as the image colorspace. On Intel CPU PC's (Mac and Windows) the website and images look good - as expected - on any browser (safari, firefox, ie). But, on PowerPC based Macs the website looks AWFUL. There is a blue/green tint across the whole webpage and the images look super saturated and whacky, regardless of browser (firefox / safari). Both powerPC macs I tested with are running OSX 10.5.7 and have Flash Player 10 installed.
    Can you explain why this is happening? See for yourself - http://www.stoqq.com
    Regards
    Nik.

  • [Safari Lower Bar Appearing Mid Screen Bug]

    When entering an 'upload' box to upload an image, the safari bar (back, next etc) appears mid screen and you can't use the lower half of the screen until refreshing

    I'm not sure the exact name, either. The missing bar is usually has at the top of the screen with options: File, Edit, View, Tools, Windows, etc.  It appears for other programs. Here is a screen shot of I have:

Maybe you are looking for