Recognizing CD/RW

Hi all, i have a litte problem to find a solution about the filesystem device.
I need for my Gui application to change the icon of a Jtree because i use
other icons set to show the device like hard disk icon, cdrom reader and other.
I have used the FileSystemView method to get info about the device
but the only problem is that i cannot to be able to distinguish main partition
like C:\ from CD\Dvd.
There is any person that can explain if there is a way to do.
This is a simple snippet of code to show the problem: http://eugeneciurana.com/pastebin/pastebin.php?show=9094
Thanks so much to all.

jpl,
Thanks.
I was unable to access the superdrive on my G4 PB from the Pismo(which is the system I need reload OS.
Here's what I did and what showed.
I shut down both machines. connected FW. Powered up G4 w/<T> held down. Got target icon. Booted Pismo. HD showed on Pismo desktop. Loaded OS disk (DVD, that's why it wasn't showing drive prior ) Drive didn't show on Pismo. Tried DVD player which wouldn't work because of incompatibilty.
Shut down, booted.. G4 inserted OS DVD and set startup disk to that drive.
Shut down, booted G4 in target mode. Booted Pismo w/<opt> key and picked <disk> to boot from. could not see it on Pismo.It booted from the HD and not optical.
Now, I am confused. And have a potentially embarrassing question.
Is this the opposite of what I should have done? If I use Pismo as target disk(that's the one to update) why wouldn't I be able to update its system from my optical? The DVD I have says "PowerBook G4, Software Install and restore"..Does it matter that my Pismo is a G3?
Thanks again,
Hanuman
Hanuman
15" G4 PB Titanium 1ghz 768 RAM   Mac OS X (10.3.9)   Pismo 400 320 RAM 40Gb HD 10.2.8

Similar Messages

  • IPod classic no longer being recognized by iTunes

    iPod classic version 2.0.4 is not showing up in my iTunes anymore. I can see it listed in my device manager under Other Devices as iPod with a yellow exclamation point, although I've followed the instructions in this article iOS: Device not recognized in iTunes for Windows and I get an error stating "Windows found driver software for your device but encountered an error while attempting to install it. The system cannot find the file specified."
    I've uninstalled and reinstalled iTunes already. I also have an iTouch 5th gen which is being recognized fine, the same iPod classic is being recognized on my laptop fine but my pc is what has all my music is.

    I am having the exact same problem.  My ipod has been stuck in disk mode for over two hours and now itunes is frozen.

  • WRT120N no longer recognized by laptops

    I'm not quite sure where the problem lies, so I'm going to go over everything that happened so I can hopefully get an answer. Any help is MUCH appreciated.
    We were running a few laptops (Acer Aspire 5517 on Vista) off our WRT120N router wirelessly. We have it hooked up to a wireless modem. All signs show that the modem and router are running fine. The wireless network we were using, I'll call it Network-1, stopped showing up as an option in the wireless connect menu. Prior to this all the laptops could connect to Network-1 by wire or wirelessly without a problem. I don't know what happened to start the problem, but Network-1 is no longer a wireless network option.
    When I wire a laptop to the router, it connects to the internet and says it's currently connected to Network-1. But when I try to connect the wireless network via a wired connection, the new network I set doesn't show up in the connection menu. When I try to set up the router again (while the computer is wired), I get the error message "Windows did not detect any wireless network hardware". So it seems that although I am able to get an internet connection through the router, the computer is not recognizing it.
    One of the laptops is able to connect wirelessly through a different network (Network-2). It looks like Network-2 was set up automatically by the laptop. Another laptop has Network-2 as an option, but it says the network security key is wrong. I have no idea what the password might be, the computer where Network-2 works connects automatically, I haven't had to type a password. I'm not sure what happened here, if it's two different connections with the same name, or if it's the same thing. I don't even know if this is relevant.
    Again, we would be SO grateful for any help!
    Solved!
    Go to Solution.

    Well i think due to some reason the wireless settings of your Router must have got resetted, that's the reason you are unable to see your wireless network name. So you need to Hardwired you computer to the Router and login to the router setup page and change the wireless settings of your Router.
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    - Here select manual configuration...Wireless Network mode should be mixed...
    - Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...
    - Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
    NOTE : Passphrase should be more that 8 characters...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
    Now see if you can locate your Wireless Network and attempt to connect...

  • USB Device for IPOD not recognized by Windows, whether ipod connected or no

    During the past few days I have received a pop up error message from (I would think) Windows that the USB device is not recognized. I have the USB plug for the ipod connected (as always)but the ipod isn't even connected. It keeps popping up like every few seconds that the usb device is not recognized.
    When I attach the ipod itself, the ipod is recognizing it because it powers up. But, it took 10 times just to get the ipod to recognize through itunes. It updated, then immediately upon completion, windows again starting giving repeated error messages that the usb device wasn't recognized.
    I have downloaded the newest itunes but I had it on my system for 4 days with no problems whatsoever. I don't think that's it. No other system changes.
    I've deleted my temp files and cache. Also did a "disk clean up" and "defrag." It's still doing it.
    Any suggestions?

    I'm having the same problem. Ever since I upgraded to version 7, iTunes & my PC no longer recognise my iPod, and it therefore won't sync.
    It's not the USB port (other devices work in it), I rebooted my iPod and re-installed iTunes, I've tried stopping and starting the iPod Service (but can't see my iPod in My Computer). When I run the Diagnostics it says iPod connection failed. I've even bought a new USB cable but that doesn't work either.
    This is driving me up the wall. Is there a glitch with iTunes 7?
    Can anyone help me out?? Thanks
      Windows XP  

  • I-touch no longer recognized by Windows XP Pro

    It will still charge up on the computer but the computer doesn't not recognize it in My Computer. Also, when I try to run diagnostics on I-Tunes it tells me the device is not plugged in. I've tried the trouble shooting assistant but that doesn't help me. I've also tried this link, but the computer still doesn't recognize the I-touch. http://support.apple.com/kb/TS1495
    Everything worked fine until I let the battery go completely dead. When I plugged it into the computer to charge, I got an error message and the computer never recognized the I-touch again.

    Since Apple Mobile Device Services is the piece of software responsible for communicating with your touch, is it operating correctly? Refer to this article to troubleshoot that service: http://support.apple.com/kb/TS1567
    If you need to, do not hesitate to uninstall iTunes, Apple Mobile Device Services, and Quicktime. Be sure you reboot your computer before downloading and installing the latest version of iTunes.

  • Video IPOD no longer recognized by Itunes and wont Update

    This is a long complicated issue. My Ipod has been working flawlessly until 2 weeks ago. Someone tried to plug it up to their computer to charge it and it wiped out my library and added their library. At first i was thinking no big deal, i will just reconnect it with my computer and it will load my library back on. However once connected to my computer it is not recognized by itunes. So i did a reset , which seemed to be working great and it started "updating" about 80% through that process it gave me an error message that says " This disc can not be written to or written from" now I have no idea why it would say that? and although it seems completely wiped out and useless, it still shows that much memeory is missing in the "about ipod" screen on the ipod. So i know the information is there somewhere , somehow?... Anyway I dont know what to do, Does anybody have any suggestions?
    Oh and I have also uninstalled and reinstalled the Itunes program to make sure it is up to date. WOuld adding new songs to my library have caused this problem?

    1. Try Resetting the iPod. Hold Select and Menu for 6-10 seconds - until you see the Apple Symbol.
    2. Use iPod Updater to restore your iPod to factory settings.
    See if those two steps clear up your problem.

  • 1st Generation iPod Touch No Longer Recognized by Windows 7 PC

    I have a 1st generation iPod Touch (no camera) that can no longer connect to my Windows 7 pc. Plugging in the iPod via USB does not trigger any sort of dialog box in Windows and it doesn't trigger a message saying a device has been connected; the iPod does not show up in either iTunes, Computer, Device Manager or Devices and Printers, either as an Apple mobile device or an unrecognized device, and does not charge when connected to USB (though the wall-charger still works). As far as my computer is concerned this iPod does not exist. I had successfully synced this iPod as recently as one week ago and am ready to pitch the thing in the garbage if I can't find a solution.
    I have the latest version of iTunes as well as the most up-to-date Windows updates. I have already followed all the steps listed here (iOS: Device not recognized in iTunes for Windows) multiple times with no success.
    I also have tried following the instructions listed here (Re: For those Windows users who suddenly cannot see their device in iTunes. Here's a solution that has worked.) but this also hasn't worked since the iPod isn't recognized in the Device Manager and I am not given the option of updating the drivers, manually or otherwise.
    I have uninstalled/re-installed iTunes and all related Apple services multiple times. The Apple Mobile Device Service is functioning normally. iTunes diagnostics indicate that there is no device connected no matter what I do. I have reinstalled my Windows USB drivers and changed the settings on the USB Root Hub in the Windows Device Manager to disable power saving options.
    I have tried connecting the device to another PC which detects and syncs another apple device (iPhone 5) with no issues, and had the exact same result: the computer doesn't even recognize an iPod is connected.
    I can't update the Apple Mobile Device Drivers because the device is not recognized by my machine in any way.
    I even completely reset my iPod and that just left me with a unactivated iPod that still isn't detected.
    I am really unbelievably fed-up with the useless "try checking your USB cable"-style advice that people seem to offer on this forum. If anybody has dealt with this issue and has any serious advice other than "re-install iTunes," it would be much appreciated.

    You said "I am really unbelievably fed-up with the useless "try checking your USB cable"-style"
    - Did you try another cable?
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    Try on another computer

  • IPOD NO LONGER RECOGNIZED BY ITUNES - HELP!!!!!!!!!!!!!!!!!

    When connecting to I-Tunes my Ipod now appears only as 'IPOD'
    The Windows 'Autoplay' box appears on the left hand side of my screen.
    Everything then freezes for a short while then an error message says that I-Tunes has detected an Ipod that is corrupted.
    My Ipod itself is fine so I'm reluctant to restore if that will not solve the problem.
    Is something to do with an automatic software update?
    Please help......................
    Advent   Windows XP  

    iOS: Device not recognized in iTunes for Mac OS X
    Do not omit the additional information pararaph.

  • Unable to capture in FCP, Quicktime and iMovie, camera not recognized.

    I am unable to capture in FCP, Quicktime and iMovie.
    I have been dealing with this problem for quite a while now, and I think I have tried everything posted on these forums regarding this issue. I have been to the Quicktime, iMovie, and this FCP forum looking for the solution. Hopefully someone has a suggestion that I have missed or have not tried yet. I have a Powerbook G4 running OSX Tiger 10.4. I am running Quicktime 7.04, and FCP 4.5.
    My problem is this… I am unable to capture from my Canon ZR-200 Mini DV camera, using Final Cut Pro, iMovie and also Quicktime. FCP says no camera recognized. iMovie says no camera attached, and Quicktime says no recording device found. In FCP, I am using the Firewire Basic setting, and NTSC DV settings. I have captured in FCP with the same camera several times in the past. I think the problem started when I upgraded to OSX 10.4, or one of the Quicktime upgrades.
    Here are the details…
    - Camera is connect via Firewire. I have tried the built in ports, as well as a Firewire Carbus card.
    - OSX recognizes the Canon ZR-200 in the System Profiler, so I know the computer sees the camera.
    - I have tried the camera on a Windows XP machine, and capture works perfectly, so I know the camera is functioning properly in VTR mode.
    - Deleted my FCP pref’s using FCP Rescue.
    - Deleted the Quicktime receipts, and re-installed Quicktime 7.04
    - Reverted back to Quicktime 7.01
    - Set the audio to 44.1 in the the Audio MIDI setup in the Utilities folder
    - Tried the “GarageBand” fix, opening the programing, playing a few notes and closing.
    - I have installed Quicktime using the program “Yank” to completely delete Quicktime and re-install.
    I may have tried more solutions, but these are the fixes that I can recall.
    If anyone has any others suggestions, it would be much appreciated.
    Brent

    Hi Brent:
    Although it looks as if you have tried all of the 'fixes' that are normally suggested here, please read through this Apple Article to see if some obscure thing applies to you.
    iMovie: Cannot see or control camera
    http://docs.info.apple.com/article.html?artnum=43000
    Sue

  • Aio Remote: PDFs not recognized by Google drive.

    Aio Remote on iPad Air2 iOS 8.1.1 - I created a PDF on my iPad from my HP Envy 7640 using Aio remote app. In the files/document section it's there (3 pages) as a PDF. But when I upload a copy from Aio Remote to Google Drive it's not recognized by Google Drive as a PDF even though it has a PDF extention. I have other PDF files stored in Google drive that are perfectly fine. It must be something in your app that is the problem.

    More info: if I send it from Aio remote as an email attachment to myself I get a PDF that I can upload to Google drive and Google drive reconizes it as a PDF. again proving it is Aio remote that is doing some thing wrong when uploading to Google Drive.

  • I need to convert PDF file to Word Document, so it can be edited. But the recognizing text options do not have the language that I need. How I can convert the file in the desired of me language?

    I need to convert PDF file to Word Document, so it can be edited. But the recognizing text options do not have the language that I need. How I can convert the file in the desired of me language?

    The application Acrobat provides no language translation capability.
    If you localize the language for OS, MS Office applications, Acrobat, etc to the desired language try again.
    Alternative: transfer a copy of content into a web based translation service (Bing or Google provides a free service).
    Transfer the output into a word processing program that is localized to the appropriate language.
    Do cleanup.
    Be well...

  • Memory modules and hard drive not recognized

    I removed and reinserted the factory installed Satellite L505D-LS5007 laptop hard drive and memory modules just as practice for installing a hard drive upgrade and an 8GB memory upgrade. The problem is obviously with the memory and not with the hard drive.
    After the first practice try, one memory module was recognized. Also for a few seconds after the first practice try, I ran the PC with the battery installed, but no memory installed. I did not look in the User's Guide first to see that I should have removed the battery before removing the memory.
    Now the System Indicator Lights for the HDD Activity and Memory Card Reader do not light up. The PC turns on and the display is solid black with no messages.
    Before buying new memory modules, what possible ways might there be to get the PC to recognize the factory installed memory modules and hard drive again?
    Solved!
    Go to Solution.

    When troubleshooting, I always change one variable at a time. I would hate to miss a solution by being in a hurry. In this case, you may have damaged either the RAM or the RAM slot. I would stick with the Toshiba specifications for the RAM, making sure it is the correct size, speed and type recommended. I also recommend that when you replace the RAM that both modules be from the same manufacturer, size, and specification. Try one RAM module in one slot and then the other. And then try both RAM modules in both slots. After the testing you should be able to figure if this is a RAM problem or a RAM slot problem.
    In the case of hard drives, the real test is whether or not the Bios sees the hard drive. If the Bios doesn't see the hard drive, it's not going to work. The Bios should see the hard drive whether or not the hard drive is partitioned, formatted or has data on it. My experience has been that many Toshiba laptops will work fine with larger capacity hard drives provided they are the same speed in RPMs, have the same interfacing connection and physically the same size.
    Again, prior to doing any work on your computer, make sure that both the AC power has been disconnected and the battery has been removed. Be careful out there. A blown repair job by a non-Toshiba tech is NOT covered under warranty.

  • I recently upgraded to ios7 and now my PC is not recognizing my iphone

    I am having several problems.  I recently upgraded to ios7 and now my PC (Windows 7) is not recognizing my iphone.  1) I am getting an error message when itunes opens: "Itunes could not connect to the iphone because it is locked with a passcode. You must enter your passcode on the iphone before it can be used with itunes."  How did it get locked and how do I unlock it without losing my data?  What do they mean by passcode?  I don't have a 4-number code to get into my iphone activated.  In fact, I've never had a passcode.
    2) I cannot download my photos from my iphone onto my computer because my computer doesn't recognize my iphone.  In other words, my iphone does not show up on my computer (no iphone icon, no DCIM folder). 
    3) This is a separate issue but it is also very confusing: I went online to check my iCloud and I cannot see any data (icloud.com).  But I know that I set up iCloud when I upgraded to ios7 and it backs up my data every night. What am I doing wrong, am I unable to see my data and photos?
    Why is this happening?  It was bad enough that when I upgraded to ios7, I lost my Notes - I have no idea why they didn't return.  But now essentially my iphone is not recognized when connected to my computer and this is very frustrating.  I have read numerous previous postings regarding downloading photos onto the PC and regarding this passcode error and cannot find a resolution, so I would appreciate any help.

    No problem!
    This will make it easy for you:
    http://www.tuaw.com/2011/07/09/quicken-wont-run-on-lion-heres-10-mac-apps-to-cur e-those-blue/

  • I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP

    I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP

    Did you try to open teh fle by double-clicking its icon? If the file was made with an older version of Office, you may get that message. Try opeing PP and, from its "File" menu, see if you can open the ppt. I've foundthat often gets around that message and then yo ucan save the file from the newer version.
    If that doesn't work, consider asking in the Microsoft Office: Mac forums here:
    Office for Mac forums
    PowerPoint is not an Apple product and it seems a lot of people around here avoid Office.

  • HT204053 I have one apple ID for purchases and then my mobile me ID where I use for email.  So I have set my cloud with my mobile me name, while keeping my purchases the original name.  Will my purchases be recognized as purchases when backup is finished.

    I have one apple ID for purchases and then my mobile me ID where I use for email.  So I have set my cloud with my mobile me name, while keeping my purchases the original name.  Will my purchases be recognized as purchases when backup is finished.

    Welcome to the Apple community.
    So long as you are logged into the iTunes Store, using the correct ID and password (settings >store), then you will always have access to your apps, books, music, TV shows etc etc bought via the iTunes Store on that account.

  • I an getting an error with photo merge in PS cc . It gives me a code tmp00000001 using from photoshop and if I try from bridge it tell me that I need to select more than one image. It is not recognizing the photos I am selecting in bridge. please help. my

    A new problem with CS5 forced me to download PScc but the problem is still there.  I am getting tmp00000001 in photo merge when importing multiple files from inside PS and if trying from bridge I am getting a pop up box telling me I need to select more than 1 file. Photoshop potomerge is not recognizing my selections from bridge..!! please help.. my knowledge of computers is a 3 on a scale of 1-10

    if i run this particular code
    ( SELECT
    AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
    AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
    AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
    FROM AccountDetails
    JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
    WHERE EXISTS
    ( SELECT *
    FROM Dcaaccountallocation
    JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
    WHERE Dcaaccountallocation.dcaid = 41
    AND Dcaaccountallocation.status = 2
    AND DebtEpisodes.DCASentDate IS NULL
    AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
    AND DebtEpisodes.DCAORLAWYER = 'DCA'
    This returns 1 row of data
    However if i run a small part of the above code...
    SELECT *
    FROM Dcaaccountallocation
    JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
    WHERE Dcaaccountallocation.dcaid = 41
    AND Dcaaccountallocation.status = 2
    It returns a lot of rows with a status of 2
    Now i presume what I am going to do is to ensure that all the fields provide satisfactory requirements, with regards to the above code. Although I have many records in all the stated tables already.
    :(

Maybe you are looking for