Reconfigure IDM 11g installation to Database for SSL communication.

Experts,
I've below environment.
Oracle IDM 11g (OID,OVD,OAM,OAAM,OIF,OIM,etc,.) 11g talking to Oracle Database RAC 11g.
At the time of IDM installation and configuration, database was not in SSL mode. Now I'm want to make SSL communication between IDM and Database.
My Questions:
1. Once I put Database in SSL mode, How can I reconfigure Oracle IDM suite so that it can talk to database in SSL mode ?
2. How much effort does it require ?
Please provide if you have any doc references.
Thanks

Hi,
Hope this helps:
http://docs.oracle.com/cd/E21764_01/doc.1111/e14308/handlinglcm.htm
Thanks,
GP

Similar Messages

IDM 11g installation issues on x64 for OIM startup

Hello,
I am trying to build a IDM 11g env on x64 machine. We have installed the following components.
a. Weblogic 10.3.4/JDev
b. SOA 11.1.1.2 and patch SOA 11.1.1.3
c. RCU to create schemas for OIM, MDS, OAM etc.
d. IAM 11.1.1.3 for OIM
e. Configured for the following, Admin Server, Managed Server, Enterprise Manager and SOA.
f. Started Weblogjc Admin Server
g. Configured for OIM for DB schema, no LDAP, RManager, ports, etc.
h. Restarted Admin Server nd OIM Managed Server, looks like all the servers started but failed to load OIM package.
All the services are running and Weblogic admin reports all the servers as up and running but cant start the oim page on http://localhost:7001/oim as configured.
I have a x64 bit installation packages with jdk160_21
Please can anyone let me know how to proceed.

You need to set up your existing DNS server to allow it to delegate to a GNS Service running on the Oracle Database Grid.
Ask your network admin to give you a subdomain that the Oracle GNS will take responsibility for.
For example if your company domain is acme.com then the GNS will resolve all connections to database.acme.com
The GNS will also be allowed to allocate a range of IP's as when those IP's or subdomain are requested the DNS just passes the work on to the GNS to resolve.
So the first step is to talk to your network admin about DNS delegation

IDM 11g installation

I am doing 11g installation of IDM and I encounter the error that OID is not up and running.
To start this /oracle/oid/bea_default/Oracle_IDM1/opmn/bin ./opmnctl startall
The OID connection seems to be alive, But still OIM installation is failing at "starting OID"

Hello,
We also have IDM installation issues. The configuration wizard failed. The log shows the following error after a bunch of
"Waiting for OID Server to come up"
"Failed to start component oid1[[
oracle.as.config.ProvisionException: HTTP status code = 400 : No processes or applications match the specified configuration.
at oracle.as.config.impl.OracleASComponentBaseImpl.manageProcess(OracleASComponentBaseImpl.java:942)
at oracle.as.config.impl.OracleASComponentBaseImpl.start(OracleASComponentBaseImpl.java:1061)
Have you resolved your issue?
(Our system: RatHat Linux 5.2, 64 bit, SUN JDK 1_6_0_17 64_bit, database 11.1.0.7 RAC)
I have search the forum and all mentioned OS parameters, kernel, Database Parameters are correctly set. But we still have no luck after more than 10 times deinstall/reinstall/config/, we even created a new database instances, wipe ou oraInventory, bea directory and reinstalled WLS 10.3.1 and patching it to 10.3.2 then 10.3.3, and reinstalled IDM 11.1.1.2 and patched to 11.1.1.3, still failed at the same spot.
Thanks,
Johnny

IDM 11g Installation Error

Hello,
I was trying to install Identity Management 11g as part of our Fusion Middleware test environment but I couldn't make it through the Installation.
I'm installing IDM 11g, just Oracle Internet Directory with Oracle Directory Integration Platform, Oracle Directory Services Manager, and Fusion Middleware Control in a New WebLogic Administration Domain (not selecting Identity Federation nor Virtual Directory)
All the prerequisites are fulfilled, all the verification passed.
I'm using Weblogic 11g (10.3.1), everything over a OEL 5.2.
The error I get is in the Configuration Progress stage, in Bootstrap Domain configuration section, and in the Create Domain part.
The logs show:
oracle.as.provisioning.util.ConfigException:
Error creating Domain /u01/oracle/app/wl_10.3/user_projects/domains/IDMDomain.
Cause:
A WLST Error occured.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain._createDomain(ASDomain.java:2864)
at oracle.as.provisioning.weblogic.ASDomain.createDomain(ASDomain.java:2463)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:631)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:388)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:870)
at oracle.as.idm.install.config.BootstrapConfigManager.doExecute(BootstrapConfigManager.java:660)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:82)
at java.lang.Thread.run(Thread.java:619)
progress in calculate progress2
I'm looking this logs:
./oraInventory/logs/oraInstall2009-07-21_07-17-11AM.out
./oraInventory/logs/install2009-07-21_07-17-11AM.log
./oraInventory/logs/install2009-07-21_07-17-11AM.out
Don't know where else to look or what this error means.
If some can help I thank you in advance.
Best regards.

I had a similar problem. The solution I used was to download a different version of 11g. Higher, I don't know what 11g (10.1.3) is. I don't think there was a version like that (I haven't seen it). Let's say your platform is x86. There are 3 downloads (at least) you could use:
1. Oracle WebLogic Server 11gR1 (10.3.1) + OEPE - Package Installer
oepe11_wls1031_linux32.bin
2. Oracle WebLogic Server 11gR1 (10.3.1) - Package Installer
wls1031_linux32.bin
3. Oracle WebLogic Server 10.3 - Package Installer
server103_linux32.bin
With #3, I had the same issue. IDM doesn't like it. I used #1. OEPE is just some eclipse plugins that you don't need to use but they are there in case you want to develop some custom plugins. #2 I assume would also work but I haven't tested it. The .1 in 10.3.1 is the key. 11g = 10.3.1. I think eventually Oracle will marry up the versions to be more clear. I'm not sure.
And yes, with #3, the verify would pass and it would happily install until the domain was created and bam big stack trace just like you posted. Use #1 or #2. If your Platform is different just substitute the _linux32 with your platform.

Problem while reconfiguring OIM 11g with existing Database

Hello,
I had some issues with my OIM 11g instance, so i reconfigured it by deleting user_projects folder,before deleting i took backup of config folder as i wanted to
configure with existing database.
Following steps were performed for reconfiguring OIM11g:-
1)Ran config.sh from <Middleware>/Oracle_IDM1/common/bin
2) Copied .xldatabasekey file to newly created domain
3)Ran config.sh from <Middleware>/Oracle_IDM1/bin
Then tried to start AdminServer, it showed status as running but with errors like
java.lang.NoClassDefFoundError: Could not initialize class oracle.dfw.impl.common.TempFileManager
at oracle.dfw.spi.portable.PortableDiagnosticsFrameworkProvider.init(PortableDiagnosticsFrameworkProvider.java:120)
Then tried to start OIM server , it showed status as running but with error as
oracle.iam.platform.utils.OIMAppInitializationException:
OIM application intialization failed because of the following reasons:
Password for .xldatabasekey is not seeded in CSF.
Then i tried to cofigure domain again & this time i didnt select Oracle Identity Manager from Select domain source & checked AdminServer & it was running without any errors, but when i select Oracle Identity Manager from Select domain source then i get above problems.
Can anyone provide pointers about how to resolve this issue .
Thank-You
Rahul Shah

Dear Rahul,
I got the same errors:
./admin/IDMDomain/mserver/IDMDomain/servers/wls_oim1/logs/wls_oim1.log
####<Jan 27, 2013 10:58:09 PM CET> <Error> <Deployer> <server02> <wls_oim1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <aa66ef4907f1903f:4c6a3b0:13c7e03232f:-8000-0000000000000003> <1359323889050> <BEA-149205> <Failed to initialize the application 'oim [Version=11.1.1.3.0]' due to error oracle.iam.platform.utils.OIMAppInitializationException:
OIM application intialization failed because of the following reasons:
oim-config.xml was not found in MDS Repository.
oracle.iam.platform.utils.OIMAppInitializationException:
OIM application intialization failed because of the following reasons:
oim-config.xml was not found in MDS Repository.could you explain, how did you sort out it, please? For example point 2 did you create one more domain?
Best regards,
Lain

Java.util.zip.ZipException: invalid entry CRC at 11g installation

Hi,
yesterday I experienced a very strange Oracle OUI behaviour helping one of my friends to install 32-bit 11g development system on 32-bit OEL-5.2. It literally made and still makes me mad as I never saw the installation error like that before. The OEL-5.2 installation and settings are identical to mine, all required packages installed. The 11g installation starts normally (software only installation), all OUI Prerequisite checks passes, but at about 30% of installation (extracting phase) it hangs unexpectedly - no CPU activity anymore - it's just hanging forever without any OUI message staying at 30% of installation. But the errorlog `/opt/oracle/oraInventory/logs/oraInstall2008-11-21_22-55-12AM.err' shows:
java.util.zip.ZipException: invalid entry CRC (expected 0x482e3871 but got 0x1d296a66)
        at java.util.zip.ZipInputStream.readEnd(ZipInputStream.java:378)
        at java.util.zip.ZipInputStream.read(ZipInputStream.java:141)
        at java.io.FilterInputStream.read(FilterInputStream.java:90)
        at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1470)
        at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyFileFromJar(OiijFastJarExtracter.java:307)
        at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyJarContents(OiijFastJarExtracter.java:227)
        at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:146)
        at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:341)Since that smelled like installation media file corruption, I checked cksum of the `linux_11gR1_database_1013.zip' and it was identical to the original on the OTN site, also "unzip -t <file.zip>" passed - no errors. Retrying installation (after deleting $ORACLE_HOME), doesn't help. It always hangs, but not at the same point in time. Sometimes it hangs at 5% of installation, sometimes at 20%, or 40%, but always during extracting phase, without OUI message, with similar errorlog.
Today I've tried it once again in order to figure out what's happening. It seemed I would have more luck today. The extracting and even linking phases succeeded, but, when it came to about 80% of installation (configuration pending), the installation suddenly aborted, OUI window disappeared from the screen, with error message visible only on console:
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0xb78d9725, pid=5690, tid=2767309712
# Java VM: Java HotSpot(TM) Client VM (1.5.0_11-b03 mixed mode)
# Problematic frame:
# V [libjvm.so+0x26c725]Segmentation fault occured. No errorlog in /opt/oracle/oraInventoru/logs/, but java core file of 92 MB and java errorlog `hs_err_pid5690.log', showing stack traces, were generated in system's /tmp directory. The errorlog shows:
--------------- T H R E A D ---------------
Current thread (0x08a03c58): VMThread [id=5691]
siginfo:si_signo=11, si_errno=0, si_code=1, si_addr=0x00000008
Registers:
EAX=0x00000000, EBX=0xb79f816c, ECX=0x000001fa, EDX=0x00000008
ESP=0xa4f1bbd8, EBP=0xa4f1bbe8, ESI=0xafde61c8, EDI=0xafde502c
EIP=0xb78d9725, CR2=0x00000008, EFLAGS=0x00210282
Top of Stack: (sp=0xa4f1bbd8)
0xa4f1bbd8:   000001fa 000001fa b79f816c afde4f98
0xa4f1bbe8:   a4f1bc18 b78ed5ce afde4f98 a4f1bf40
0xa4f1bbf8:   00000001 b78ed581 ae758a48 afde7764
0xa4f1bc08:   ae6051a4 b79f816c b79eb000 b7a06148
0xa4f1bc18:   a4f1bc38 b78d9871 ae5f1138 afde4f78
0xa4f1bc28:   089b7d10 089b7d10 b79f816c b79efc44
0xa4f1bc38:   a4f1bc58 b78d9b7c b79efc44 a4f1bca0
0xa4f1bc48:   a4f1bc68 b796b16c a4f1bca0 b79f816c
Instructions: (pc=0xb78d9725)
0xb78d9715:   01 00 00 00 85 c9 75 1a 8b 46 04 51 51 8d 50 08
0xb78d9725:   8b 40 08 56 52 ff 50 5c 83 c4 10 8d 65 f8 5b 5e
Stack: [0xa4e9c000,0xa4f1d000), sp=0xa4f1bbd8, free space=510k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
V [libjvm.so+0x26c725]
V [libjvm.so+0x2805ce]
V [libjvm.so+0x26c871]
V [libjvm.so+0x26cb7c]
Signal Handlers:
SIGSEGV: [libjvm.so+0x32a000], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGBUS: [libjvm.so+0x32a000], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGFPE: [libjvm.so+0x28e010], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGPIPE: [libjvm.so+0x28e010], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGILL: [libjvm.so+0x28e010], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGUSR1: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
SIGUSR2: [libjvm.so+0x290460], sa_mask[0]=0x00000000, sa_flags=0x10000004
SIGHUP: [libjvm.so+0x28fe90], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGINT: [libjvm.so+0x28fe90], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGQUIT: [libjvm.so+0x28fe90], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGTERM: [libjvm.so+0x28fe90], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
vm_info: Java HotSpot(TM) Client VM (1.5.0_11-b03) for linux-x86, built on Dec 15 2006 02:25:41 by java_re with gcc 3.2.1-7a (J2SE release)These are only selected parts of the errorlog as it is too long to be presented in the whole.
What specially confuses me here is the fact that this OEL-5.2 installation is identical to mine, with same kernel, same kernel params, shared memory settings, etc. Also, this is obviously a java issue, but it is jdk1.5.0_11-b03 shipped with Oracle 11g. I've never had a problem with it.
Anyone has a clue what the heck is this and what causes those errors during Oracle 11g installation?
Thanks.
NJ

The cause of errors was a dying Westen Digital drive, specially the 48G partition reserved only for $ORACLE_BASE (/dev/sdb3 mounted on /opt/oracle).
A simple quick scan of unmounted partition (badblocks -v /dev/sdb3) reported more than thousand new bad blocks (compared to the last scan six months ago). Although I strongly believe, specially in the case of WDC drives, that the best utility to "repair" bad blocks is the one that opens a window and prints the message: "Go to the nearest shop and buy a new drive", I was very curious to prove my suspicion just on this drive. After zero-filling the partition with dd, then formatting it (mke2fs -cc) and mounting again, the 11g installation and database creation (on the same partition) successfully completed, performing fast and smoothly. To make sure it was not a casual event, I repeated the installation once again with full success. The database itself is working fine (by now). Well, the whole procedure took me more than four hours, but I'm pretty satisfied. I learned once again - stay away from Western Digital. As Oracle cannot rely on dying drive, my friend is going tomorrow to spend a 150+ euro on two 250G Seagate Barracudas and replace both WDC drives, even though the first drive seems to be healthy.
In general there is no difference between loading correct data from good disk into bad memory and loading the incorrect data from dying disk into good memory. In both cases the pattern is damaged. For everyone who runs into the problem similar to this, and the cause cannot be easily determined, the rule of thumb must be:
1. test memory and, if it shows any error, check sockets and test memory modules individually
2. check disks for bad blocks regardless of the result of memory testing
Therefore I consider your answer being generally correct.
Regards
NJ

Vulnerabilities in MySQL in Oracle 11g installation

I have Oracle 11g as the database for my GUI application, there was a security analysis run on the server hosting the Oracle 11g database and it is showing security vulnerabilities with respect to MySQL such as CVE-2012-2750, CVE-2012-3163 etc. The vulnerability solution in the security report is showing solutions like:
1) Download and apply the upgrade from: http://downloads.mysql.com/archives.php
2) Download and apply the upgrade from: http://dev.mysql.com/downloads/mysql
My query is that any patches or fixes for the security bugs need to be coming from Oracle or should they be applied as stand-alone MySQL fixes.
I hope my query is clear.
Please revert with the reply to my query.
Regards

975148 wrote:
I have Oracle 11g as the database for my GUI application, there was a security analysis run on the server hosting the Oracle 11g database and it is showing security vulnerabilities with respect to MySQL such as CVE-2012-2750, CVE-2012-3163 etc. The vulnerability solution in the security report is showing solutions like:
1) Download and apply the upgrade from: http://downloads.mysql.com/archives.php
2) Download and apply the upgrade from: http://dev.mysql.com/downloads/mysql
My query is that any patches or fixes for the security bugs need to be coming from Oracle or should they be applied as stand-alone MySQL fixes.
I hope my query is clear.
Please revert with the reply to my query.
Regards
Oracle (the product) is not MySQL (the product).
Oracle (the product) does not know or care about MySQL issues.
Is MySQL installed on this server? Is it being used? Depending on your un-named OS, MySQL very will could have been installed simply as part of the OS installation, really just a form of 'bloat-ware'.

How to set the Certifcate to use for SSL when more than one available?

I apologise for bad wording of question.
We have a 11g Directory Server and when we created the directory instance it generated a self-signed certificate. very nice.
We have recently requested and installed a CA signed certifcate, so we now have TWO certificates in the directory certificate store. Default Certificate and the new Server-Cert (the CA signed one)
LDAP clients STILL seem to be presented with the self-sgned certificate though.
Simple question... how do I make my Server-Cert the 'default' certificate presented to LDAP clients ???
I would rather not delete the self-signed cert if possible.
I cant find any documented method to achieve this.

# Listing Certificate
$ /certutil -L -d <path>/slapd-abc/alias -P slapd-
# Add Trust by adding CT
$ certutil -M -n "GeoTrust DV SSL CA" -t CT,, -d <path>/slapd-abc/alias -P slapd-
# Verify the setup.
$ certutil -L -d <path>/slapd-abc/alias -P slapd-
( You should see the CT beside the relevant cerficate, making it default for SSL communication )
GeoTrust DV SSL CA CT,,
Link : http://docs.oracle.com/cd/E19656-01/821-1504/6nmg10b6g/index.html ( Look around for different steps for configuring SSL )
JPrince

Configuring Oc4j 9.0.2 for SSL

Hi,
I'm trying to enable oc4j 9.0.2 for SSL communication. I have created the certificate request using the Oracle Wallet Manager and received a signed certificate from CA. I refer my .der file created by OWM in the ssl-config tag-keystore attribute.
When i start my oc4j server, i receive the following error.
Error starting HTTP-Server: Unable to intialize SSLServerSocketFactory 'com.evermind.ssl.JSSESSLServerSocketFactory': Invalid keystore format
If i create a self-signed certificate with keytool, it works fine.
Can someone help me in this.
Thanks in advance.

Hi,
I found that Oracle Wallet Manager cannot be used with Oc4J-SO. KeyTool should be used instead. However certificates for HTTP server could be configured using the Wallet. It could then be configured to proxy the request to the oc4j using mod ssl. As my requirements are different, i did not try the latter. Hope this info is useful to someone working on a similar issue.
Thanks.

Oracle 11G database for 64 bit windows installation error

Hi,
I downloaded the 11G 64bit for windows and unzipped the files into one folder and ran the setup.exe as an administrator. It opened up the java screen and I chose, create and configure a database. Next screen I chose, Desktop Class, when I click next it dies. It does not show me teh next screen. I went to the appdata folder and saw this error but not sure what to do EXCEPTION_ACCESS_VIOLATION (0xc0000005). Please help. Thanks for your time and help.

Adipur wrote:
Hello, have you tried to create new administrator user, and install using that newly created user...?You found this to be a band-aid solution in your specific instance. (Strange case of installation on windows 7 - unable to complete installation But you have drawn the wrong conclusions and never found the real issue in the cited thread. Under the circumstances, I would not be offering this up as a generalized solution, as you are doing in this thread and in others:
Re: Oracle 11G database for 64 bit windows installation error
Re: Trouble installing Oracle Personal in Windows 7 64-bit environment
I have been doing Oracle DBA work since v 7.3, and have never seen advice like this to be anything more than a work-around the real issue.
Edited by: EdStevens on May 15, 2013 7:03 AM

11g installation for oim & oam

Explain the steps to install Oracle Indentity Manager & Oracle Access Manager in 11g version?

Following is high level steps for the same:
1. Install database
2. create Schemas using RCU utility
3. Install weblogic
4. Install Oracle Fusion middleware components (OIM, OAM etc)
5. Configure Domains and servers in weblogic
5. Configure design console
Refer links below for detailed information:
http://docs.oracle.com/cd/E21764_01/install.1111/e12002/overview.htm
OIM 11g installation steps
Hope this helps.
regards,
GP

Oracle Database 11g Installation Issue: ORA-12560:TNS: protocol adapter error.

Folks,
Hello. Initially, my Windows XP host name is "localhost" and IP address 127.0.0.1.
I installed Oracle Database 11g with Windows XP successfully and all Database clients work with Database instance correctly.
For some reasons, I uninstalled the entire Database Server and delete the entire installation directory /oracle.
I configured Windows XP IP address into 192.168.196.101 in order to ping other machines.
For my need, I installed Oracle Database 11g with Windows XP again. On step 7 of 8: Oracle Database Configuration Assistant, I got this error:
ORA-12560:TNS: protocol adapter error.
I click "Password Management" button, there are no rows in this Windows (no username, no lock accounts).
I check listener as below:
C:\>lsnrctl
LSNRCTL>start
Its output: listener name LISTENER has already been started.
LSNRCTL>status
Its output: ......Service DB1 has 1 instance. Instance DB1 status ready. The command completed successfully.
I check \Oracle\cfgtoollogs\dbca\DB1\trace file, the entry is :
listen[0]=LISTENER address=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(port=1522))
I also check \oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN\SAMPLE\tnsnames.ora file and listener.ora file, the entries are the same as below
HOST=localhost port=1522
I think HOST=localhost and port=1522 is the cause of the error ORA-12560 because Windows XP has been configured into HOST=192.168.196.101.
But I don't understand how to solve this issue.
Can any folk tell me how to solve this issue ? need to cancel the installation on step 7 of 8 and install it again ?
Thanks.

Folks,
Hello. Oracle Database 11g Installation Wizard is on step 7 of 8. I don't cancel the Wizard. I am not sure whether there is effect or not. listener.ora is not removed. I have been waiting for a while after stop listener. I run the 3 commands again and copy the result as below:
C:\>lsnrctl stop
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 14-AUG-2013 19:32
:14
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   64-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1522)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   64-bit Windows Error: 61: Unknown error
C:\>
C:\>
C:\>
C:\>
C:\>
C:\>lsnrctl start
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 14-AUG-2013 19:33
:04
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
System parameter file is C:\SecondTime_OracleDatabase_Install_Directory\product\
11.2.0\dbhome_1\network\admin\listener.ora
Log messages written to c:\secondtime_oracledatabase_install_directory\diag\tnsl
snr\user-19yyar8x0d\listener\alert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1522
ipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                14-AUG-2013 19:33:07
Uptime                    0 days 0 hr. 0 min. 3 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\SecondTime_OracleDatabase_Install_Directory\product
\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File         c:\secondtime_oracledatabase_install_directory\diag\tn
slsnr\user-19yyar8x0d\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1522ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
C:\>
C:\>
C:\>
C:\>
C:\>lsnrctl service
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 14-AUG-2013 19:36
:37
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Service "DB1XDB" has 1 instance(s).
Instance "DB1", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1022 state:ready
         DISPATCHER <machine: user-19YYAR8X0D, pid: 120>
         (ADDRESS=(PROTOCOL=tcp)(HOST=user-19yyar8x0d)(PORT=1051))
Service "DB1" has 1 instance(s).
Instance "DB1", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:19 refused:0 state:ready
         LOCAL SERVER
The command completed successfully
C:\>
As we see, listener.ora file is not removed by Stop command. I am on the installation Wizard. How to solve this issue ?
Thanks.

Getting error during the Oracle9i installation "Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"

Hi All,
Getting follwing error during the Oracle9i installation “Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"
u01/app/oracle/product/9.2.0/install/make.log
- Linking Oracle
rm -f /u01/app/oracle/product/9.2.0/rdbms/lib/oracle
cc -L/u01/app/oracle/product/9.2.0/lib/ -L/u01/app/oracle/product/9.2.0/rdbms/lib -o /u01/app/oracle/product/9.2.0/rdbms/lib/oracla
ld:
load_whole_file: Could not malloc 31328. bytes, for /u01/app/oracle/product/9.2.0/lib//libn9.a(asndata.o), didnt attempt to mmap
Stop.
*** Exit 1
While checked the memory details in the machine its showing plenty of free virtual memory.
# ps aux
USER PID %CPU %MEM   VSZ RSS TTY      S STARTED         TIME COMMAND
oracle     1353 0.6 27.2 601M 555M pts/2    S N 09:14:07 5:49.67 /tmp/OraInstall2014-01-21_09-14-02AM/jre/bin/../bin/alpha/native_threads/java -Doracle.installe
root       3033 0.0 0.4 10.4M 7.7M pts/0    R + 10:59:44 0:00.06 ps aux
oracle     1351 0.0 0.0 2.46M 320K pts/2    I N 09:14:02 0:01.36 ksh /tmp/OraInstall2014-01-21_09-14-02AM/installer -Doracle.installer.library_loc=/tmp/OraInsta
oracle     1277 0.0 0.0 2.48M 312K pts/2    I + 09:02:44 0:00.04 -ksh (ksh)
root       1269 0.0 0.0 2.56M 232K pts/2    I    09:01:23 0:00.01 -sh (sh)
root       1268 0.0 0.0 5.31M 768K ??       I    09:01:22 0:00.11 /usr/bin/X11/xterm -ls
root 1 0.0 0.0 608K 96K ?? IL   08:45:31     0:00.08 /sbin/init -a
root 0 0.0 3.9 2.52G 79M ?? R < 08:45:31     0:23.16 [kernel idle]
And I have rebooted the machine still also getting the same error.
Is there any way to resolve this issue??
Regards
prasanta

Pl elaborate the business / technical reason for installing a 15+ year old unsupported software on a 15+ year old unsupported hardware, assuming you are installing an a supported OS version
HTH
Srini

Manual script to create database for Access Manager installation

Hi,
Is it possible to perform new installation on OAM Access server in the database using manual methods (By running specific scripts). Without using GUI method to create the component databases?
The databases for the OAM will be manually created, What are the list of scripts that needs to be run against the database which are responsible for creating the "OAM-Coreid Access" component?
Does not find the informationin the installation guide.
thanks in advance.

Hi Franck,
I have found the script(rw_server.sql). I want to known who will be the owner of objects which i will create with this script.
Can you explain me this sentence:"
alternatively just uncomment the references in rp2rro.pll."
Thank you for your help.
TYAG

11g Installer for windows

Any idea when 11g Installer binaries for windows will be available , i want to install and play with it on my labtop....

I better recomend Oracle certified Linux distros...
Here you will find a full procedure for Oracle Enterprise Linux 4 installation on VMWare, specifically tailored for Oracle DBMS 10g and above...awesome!
http://www.geocities.com/upqso2/docs/OEL4U5onVMWareVM.pdf
Hope it helps
http://oracledisect.blogspot.com

Reconfigure IDM 11g installation to Database for SSL communication.

Similar Messages

Maybe you are looking for