Reconnect to portal database after database restart

Hi,
After having seen a 24/7 EP system in production for a while, there is one contributing factor which is causing more downtime than we would like (even though the downtime is very small).
When ever the portal database is restarted or we loose the network connection, the SAP J2EE (and hence EP) is not able to reconnect to the database (as you would expect from such a mature product). The forces us to take down the entire cluster (yes the cluster is big and takes a lot of time to restart) and then take it up again.
An OSS has been open (and been through development) and the verdict is that it cannot be done.
However, I don't believe them. Some of you SAP expert here must know of some very cleaver hack to get this working.
If you have any ideas or experience with this, please do not hesitate to post it.

Managed to find some undocumented command that did the trick.
1. Telnet to the administration console (port 50008 is standard ?)
2. Login as administrator
3. Run the lsc command in order to get the cluster id of an application node
4. Change the active node to an application node
>jump <clusterId>
5. Add the dbpool command set
>add dbpool
6. Close the database pool
>close_pool <poolname> -force
7. Open the database pool
>open_pool <poolname>
From the SAP J2EE administration console in the dbpool there seems to be a functionality for closing and opening the pool, but this doesn't work, at least not in PL21 (maybe it doesn't force the connections to close)
Message was edited by: Dagfinn Parnas

Similar Messages

Error while connecting to Database after Database upgradation

Hi All,
I installed and worked with BAM and used Oracle Database 9i previously. After the Database
was upgraded to 10g (10.2.0.4.0 which is compatible for BAM), I am trying to ReInstall BAM
which is throwing me an error.
It accepts the Database Login Information but at the step of building Repository for
Enterprise Link it gives up the following error:
' A connection with the database cannot be made '
Can anyone please help me to figure out this one.
Thanks,
Vishal

Hi,
I also have the same problem.Could you plz tell us what configuration I need to add in tnsnames.ora file.
content of my tnsnames.ora file is below
# tnsnames.ora Network Configuration File: C:\DevSuiteHome_2\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = Rahul-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PLSExtProc)
)

System does not automatically reconnect to wifi network after sleep/restart

My iMac G4 (2GB RAM, 10.5.1, AirPort Extreme) does not automatically reconnect to my wife network after waking from sleep or restart. I just recently switched the iMac from a wired to wireless set-up though the machine has always had the AirPort card. In wired mode, it always automatically found the network.
Network preferences have the "Ask to join new networks" checkbox selected. Below the checkbox it reads "Known networks will be joined automatically."
My wireless router is Linksys WRT150N, security type is PSK and encryption method is AES key.
Anyone have any suggestions?
Thanks!
bk

I'm having the same problem, the only way i can connect to my wireless network is to restart the computer, and open safari immediately. Then once it goes to sleep or i shut the notebook, i have to restart it again to use the internet. It's driving me nuts, and nobody knows how to fix it. I've tried firefox (it didn't help) and my sisters macbook connects just fine to my network, so it has to be a network setting. I'm going to schedule an appointment with a mac store tomorrow. so I'll post again when they fix it for me. hopefully i will understand how they solve the problem so i can post it to you guys

Database Crashing after successful restarts

Hi Guys,
I am sort stuck in a process where my DB is starting but after a few seconds its starts shutting down all the processes. The system was running perfectly before but after todays restart this is all happening.
the following is the log from the startup to shutdown. Can any one help to figure out what is causing this issue.
This is ORACLE 11G on Enterprise LINUX._
Mon Aug 13 13:12:28 2012
Starting ORACLE instance (normal)
****************** Large Pages Information *****************
Total Shared Global Region in Large Pages = 0 KB (0%)
Large Pages used by this instance: 0 (0 KB)
Large Pages unused system wide = 0 (0 KB) (alloc incr 16 MB)
Large Pages configured system wide = 0 (0 KB)
Large Page size = 2048 KB
RECOMMENDATION:
Total Shared Global Region size is 4098 MB. For optimal performance,
prior to the next instance restart increase the number
of unused Large Pages by atleast 2049 2048 KB Large Pages (4098 MB)
system wide to get 100% of the Shared
Global Region allocated with Large pages
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =28
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Release 11.2.0.3.0 - 64bit Production.
ORACLE_HOME = /u01/app/oracle/product/11.2.0.3/db_1
System name:     Linux
Node name:     OM5000
Release:     2.6.18-308.el5
Version:     #1 SMP Fri Jan 27 17:17:51 EST 2012
Machine:     x86_64
Using parameter settings in client-side pfile /u01/app/oracle/admin/OML5K/pfile/init.ora on machine OM5000
System parameters with non-default values:
processes = 150
nls_language = "ENGLISH"
nls_territory = "AUSTRALIA"
sga_target = 4G
control_files = "/u01/app/oracle/oradata/OML5K/control01.ctl"
control_files = "/u01/app/oracle/fast_recovery_area/OML5K/control02.ctl"
db_block_size = 8192
compatible = "11.2.0.0.0"
db_recovery_file_dest = "/u01/app/oracle/fast_recovery_area"
db_recovery_file_dest_size= 50000M
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=OML5KXDB)"
audit_file_dest = "/u01/app/oracle/admin/OML5K/adump"
audit_trail = "DB"
db_name = "OML5K"
open_cursors = 300
pga_aggregate_target = 34558M
diagnostic_dest = "/u01/app/oracle"
Mon Aug 13 13:12:28 2012
PMON started with pid=2, OS id=21976
Mon Aug 13 13:12:28 2012
PSP0 started with pid=3, OS id=21978
Mon Aug 13 13:12:29 2012
VKTM started with pid=4, OS id=21980 at elevated priority
VKTM running at (1)millisec precision with DBRM quantum (100)ms
Mon Aug 13 13:12:29 2012
GEN0 started with pid=5, OS id=21984
Mon Aug 13 13:12:29 2012
DIAG started with pid=6, OS id=21986
Mon Aug 13 13:12:29 2012
DBRM started with pid=7, OS id=21988
Mon Aug 13 13:12:29 2012
DIA0 started with pid=8, OS id=21990
Mon Aug 13 13:12:29 2012
MMAN started with pid=9, OS id=21992
Mon Aug 13 13:12:29 2012
DBW0 started with pid=10, OS id=21994
Mon Aug 13 13:12:30 2012
DBW1 started with pid=11, OS id=21996
Mon Aug 13 13:12:30 2012
DBW2 started with pid=12, OS id=21998
Mon Aug 13 13:12:30 2012
DBW3 started with pid=13, OS id=22000
Mon Aug 13 13:12:30 2012
LGWR started with pid=14, OS id=22002
Mon Aug 13 13:12:30 2012
CKPT started with pid=15, OS id=22004
Mon Aug 13 13:12:30 2012
SMON started with pid=16, OS id=22006
Mon Aug 13 13:12:30 2012
RECO started with pid=17, OS id=22008
Mon Aug 13 13:12:30 2012
MMON started with pid=18, OS id=22010
Mon Aug 13 13:12:30 2012
MMNL started with pid=19, OS id=22012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Mon Aug 13 13:12:30 2012
kcbztek_populate_tbskey: db key in controlfile and datafile 1 is inconsistent..
Full restore complete of datafile 4 to datafile copy /u01/app/oracle/oradata/OML5K/users01.dbf. Elapsed time: 0:00:00
checkpoint is 995547
last deallocation scn is 3
Full restore complete of datafile 3 to datafile copy /u01/app/oracle/oradata/OML5K/undotbs01.dbf. Elapsed time: 0:00:00
checkpoint is 995547
last deallocation scn is 3
Mon Aug 13 13:13:00 2012
Full restore complete of datafile 2 to datafile copy /u01/app/oracle/oradata/OML5K/sysaux01.dbf. Elapsed time: 0:00:30
checkpoint is 995547
last deallocation scn is 995211
Full restore complete of datafile 1 to datafile copy /u01/app/oracle/oradata/OML5K/system01.dbf. Elapsed time: 0:00:38
checkpoint is 995547
last deallocation scn is 993074
Mon Aug 13 13:13:08 2012
Create controlfile reuse set database "OML5K"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'/u01/app/oracle/oradata/OML5K/system01.dbf',
'/u01/app/oracle/oradata/OML5K/sysaux01.dbf',
'/u01/app/oracle/oradata/OML5K/undotbs01.dbf',
'/u01/app/oracle/oradata/OML5K/users01.dbf'
LOGFILE GROUP 1 ('/u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200K,
GROUP 2 ('/u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200K,
GROUP 3 ('/u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200K RESETLOGS
WARNING: Default Temporary Tablespace not specified in CREATE DATABASE command
Default Temporary Tablespace will be necessary for a locally managed database in future release
Mon Aug 13 13:13:08 2012
Successful mount of redo thread 1, with mount id 3547719972
Completed: Create controlfile reuse set database "OML5K"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'/u01/app/oracle/oradata/OML5K/system01.dbf',
'/u01/app/oracle/oradata/OML5K/sysaux01.dbf',
'/u01/app/oracle/oradata/OML5K/undotbs01.dbf',
'/u01/app/oracle/oradata/OML5K/users01.dbf'
LOGFILE GROUP 1 ('/u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200K,
GROUP 2 ('/u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200K,
GROUP 3 ('/u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200K RESETLOGS
Shutting down instance (immediate)
Shutting down instance: further logons disabled
Stopping background process MMNL
Stopping background process MMON
License high water mark = 1
All dispatchers and shared servers shutdown
ALTER DATABASE CLOSE NORMAL
ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
ALTER DATABASE DISMOUNT
Shutting down archive processes
Archiving is disabled
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Mon Aug 13 13:13:11 2012
Stopping background process VKTM
Mon Aug 13 13:13:13 2012
Instance shutdown complete
Mon Aug 13 13:13:13 2012
Starting ORACLE instance (normal)
****************** Large Pages Information *****************
Total Shared Global Region in Large Pages = 0 KB (0%)
Large Pages used by this instance: 0 (0 KB)
Large Pages unused system wide = 0 (0 KB) (alloc incr 16 MB)
Large Pages configured system wide = 0 (0 KB)
Large Page size = 2048 KB
RECOMMENDATION:
Total Shared Global Region size is 4098 MB. For optimal performance,
prior to the next instance restart increase the number
of unused Large Pages by atleast 2049 2048 KB Large Pages (4098 MB)
system wide to get 100% of the Shared
Global Region allocated with Large pages
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =28
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Release 11.2.0.3.0 - 64bit Production.
ORACLE_HOME = /u01/app/oracle/product/11.2.0.3/db_1
System name:     Linux
Node name:     OM5000
Release:     2.6.18-308.el5
Version:     #1 SMP Fri Jan 27 17:17:51 EST 2012
Machine:     x86_64
Using parameter settings in client-side pfile /u01/app/oracle/cfgtoollogs/dbca/OML5K/initOML5KTemp.ora on machine OM5000
System parameters with non-default values:
processes = 150
nls_language = "ENGLISH"
nls_territory = "AUSTRALIA"
sga_target = 4G
control_files = "/u01/app/oracle/oradata/OML5K/control01.ctl"
control_files = "/u01/app/oracle/fast_recovery_area/OML5K/control02.ctl"
db_block_size = 8192
compatible = "11.2.0.0.0"
db_recovery_file_dest = "/u01/app/oracle/fast_recovery_area"
db_recovery_file_dest_size= 50000M
norecovery_through_resetlogs= TRUE
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=OML5KXDB)"
audit_file_dest = "/u01/app/oracle/admin/OML5K/adump"
audit_trail = "DB"
db_name = "OML5K"
open_cursors = 300
pga_aggregate_target = 34558M
diagnostic_dest = "/u01/app/oracle"
Mon Aug 13 13:13:14 2012
PMON started with pid=2, OS id=22030
Mon Aug 13 13:13:14 2012
PSP0 started with pid=3, OS id=22032
Mon Aug 13 13:13:15 2012
VKTM started with pid=4, OS id=22034 at elevated priority
VKTM running at (1)millisec precision with DBRM quantum (100)ms
Mon Aug 13 13:13:15 2012
GEN0 started with pid=5, OS id=22038
Mon Aug 13 13:13:15 2012
DIAG started with pid=6, OS id=22040
Mon Aug 13 13:13:15 2012
DBRM started with pid=7, OS id=22042
Mon Aug 13 13:13:15 2012
DIA0 started with pid=8, OS id=22044
Mon Aug 13 13:13:15 2012
MMAN started with pid=9, OS id=22046
Mon Aug 13 13:13:15 2012
DBW0 started with pid=10, OS id=22048
Mon Aug 13 13:13:15 2012
DBW1 started with pid=11, OS id=22050
Mon Aug 13 13:13:15 2012
DBW2 started with pid=12, OS id=22052
Mon Aug 13 13:13:15 2012
DBW3 started with pid=13, OS id=22054
Mon Aug 13 13:13:15 2012
LGWR started with pid=14, OS id=22056
Mon Aug 13 13:13:15 2012
CKPT started with pid=15, OS id=22058
Mon Aug 13 13:13:15 2012
SMON started with pid=16, OS id=22060
Mon Aug 13 13:13:15 2012
RECO started with pid=17, OS id=22062
Mon Aug 13 13:13:15 2012
MMON started with pid=18, OS id=22064
Mon Aug 13 13:13:15 2012
MMNL started with pid=19, OS id=22066
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Mon Aug 13 13:13:15 2012
Create controlfile reuse set database "OML5K"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'/u01/app/oracle/oradata/OML5K/system01.dbf',
'/u01/app/oracle/oradata/OML5K/sysaux01.dbf',
'/u01/app/oracle/oradata/OML5K/undotbs01.dbf',
'/u01/app/oracle/oradata/OML5K/users01.dbf'
LOGFILE GROUP 1 ('/u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200K,
GROUP 2 ('/u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200K,
GROUP 3 ('/u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200K RESETLOGS
WARNING: Default Temporary Tablespace not specified in CREATE DATABASE command
Default Temporary Tablespace will be necessary for a locally managed database in future release
Successful mount of redo thread 1, with mount id 3547724076
Completed: Create controlfile reuse set database "OML5K"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'/u01/app/oracle/oradata/OML5K/system01.dbf',
'/u01/app/oracle/oradata/OML5K/sysaux01.dbf',
'/u01/app/oracle/oradata/OML5K/undotbs01.dbf',
'/u01/app/oracle/oradata/OML5K/users01.dbf'
LOGFILE GROUP 1 ('/u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200K,
GROUP 2 ('/u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200K,
GROUP 3 ('/u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200K RESETLOGS
Stopping background process MMNL
Stopping background process MMON
Starting background process MMON
Starting background process MMNL
Mon Aug 13 13:13:18 2012
MMON started with pid=18, OS id=22077
Mon Aug 13 13:13:18 2012
MMNL started with pid=19, OS id=22079
ALTER SYSTEM enable restricted session;
alter database "OML5K" open resetlogs
RESETLOGS after incomplete recovery UNTIL CHANGE 995547
Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/u01/app/oracle/oradata/OML5K/redo01.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Clearing online redo logfile 1 /u01/app/oracle/oradata/OML5K/redo01.log
Clearing online log 1 of thread 1 sequence number 0
Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/u01/app/oracle/oradata/OML5K/redo01.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/u01/app/oracle/oradata/OML5K/redo01.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Mon Aug 13 13:13:18 2012
Checker run found 1 new persistent data failures
Clearing online redo logfile 1 complete
Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/OML5K/redo02.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Clearing online redo logfile 2 /u01/app/oracle/oradata/OML5K/redo02.log
Clearing online log 2 of thread 1 sequence number 0
Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/OML5K/redo02.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/OML5K/redo02.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Clearing online redo logfile 2 complete
Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/OML5K/redo03.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Clearing online redo logfile 3 /u01/app/oracle/oradata/OML5K/redo03.log
Clearing online log 3 of thread 1 sequence number 0
Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/OML5K/redo03.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/OML5K/redo03.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Clearing online redo logfile 3 complete
Online log /u01/app/oracle/oradata/OML5K/redo01.log: Thread 1 Group 1 was previously cleared
Online log /u01/app/oracle/oradata/OML5K/redo02.log: Thread 1 Group 2 was previously cleared
Online log /u01/app/oracle/oradata/OML5K/redo03.log: Thread 1 Group 3 was previously cleared
Setting recovery target incarnation to 2
Assigning activation ID 3547724076 (0xd375f92c)
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: /u01/app/oracle/oradata/OML5K/redo01.log
Successful open of redo thread 1
SMON: enabling cache recovery
[22071] Successfully onlined Undo Tablespace 2.
Undo initialization finished serial:0 start:256557774 end:256557834 diff:60 (0 seconds)
Dictionary check beginning
Tablespace 'TEMP' #3 found in data dictionary,
but not in the controlfile. Adding to controlfile.
Dictionary check complete
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
SMON: enabling tx recovery
WARNING: The following temporary tablespaces contain no files.
This condition can occur when a backup controlfile has
been restored. It may be necessary to add files to these
tablespaces. That can be done using the SQL statement:
ALTER TABLESPACE <tablespace_name> ADD TEMPFILE
Alternatively, if these temporary tablespaces are no longer
needed, then they can be dropped.
Empty temporary tablespace: TEMP
Database Characterset is US7ASCII
Create Relation IPS_PACKAGE_UNPACK_HISTORY
No Resource Manager plan active
WARNING: Files may exists in db_recovery_file_dest
that are not known to the database. Use the RMAN command
CATALOG RECOVERY AREA to re-catalog any such files.
If files cannot be cataloged, then manually delete them
using OS command.
One of the following events caused this:
1. A backup controlfile was restored.
2. A standby controlfile was restored.
3. The controlfile was re-created.
4. db_recovery_file_dest had previously been enabled and
then disabled.
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Mon Aug 13 13:13:20 2012
QMNC started with pid=24, OS id=22087
LOGSTDBY: Validating controlfile with logical metadata
LOGSTDBY: Validation complete
Global Name changed to OML5K
Completed: alter database "OML5K" open resetlogs
alter database rename global_name to "OML5K"
Completed: alter database rename global_name to "OML5K"
ALTER TABLESPACE TEMP ADD TEMPFILE '/u01/app/oracle/oradata/OML5K/temp01.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
Completed: ALTER TABLESPACE TEMP ADD TEMPFILE '/u01/app/oracle/oradata/OML5K/temp01.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
ALTER DATABASE DEFAULT TABLESPACE "USERS"
Completed: ALTER DATABASE DEFAULT TABLESPACE "USERS"
alter database character set INTERNAL_CONVERT ZHS16GBK
Starting background process CJQ0
Mon Aug 13 13:13:22 2012
CJQ0 started with pid=23, OS id=22089
Mon Aug 13 13:13:23 2012
db_recovery_file_dest_size of 50000 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Mon Aug 13 13:13:27 2012
Thread 1 advanced to log sequence 2 (LGWR switch)
Current log# 2 seq# 2 mem# 0: /u01/app/oracle/oradata/OML5K/redo02.log
Mon Aug 13 13:13:30 2012
Updating character set in controlfile to ZHS16GBK
Synchronizing connection with database character set information
SYS.RULE$ (CONDITION) - CLOB representation altered
SYS.SCHEDULER$_EVENT_LOG (ADDITIONAL_INFO) - CLOB representation altered
SYS.SNAP$ (REL_QUERY) - CLOB representation altered
SYS.SNAP$ (ALIAS_TXT) - CLOB representation altered
SYS.WRI$_ADV_OBJECTS (ATTR4) - CLOB representation altered
SYS.WRI$_ADV_OBJECTS (OTHER) - CLOB representation altered
SYS.WRI$_ADV_DIRECTIVE_META (DATA) - CLOB representation altered
SYS.WRI$_DBU_FEATURE_METADATA (INST_CHK_LOGIC) - CLOB representation altered
SYS.WRI$_DBU_FEATURE_METADATA (USG_DET_LOGIC) - CLOB representation altered
SYS.WRI$_DBU_HWM_METADATA (LOGIC) - CLOB representation altered
SYS.WRI$_OPTSTAT_HISTHEAD_HISTORY (EXPRESSION) - CLOB representation altered
Mon Aug 13 13:13:30 2012
Starting background process SMCO
Mon Aug 13 13:13:30 2012
SMCO started with pid=27, OS id=22098
SYS.WRI$_REPT_FILES (SYS_NC00005$) - CLOB representation altered
SYS.SUM$ (SRC_STMT) - CLOB representation altered
SYS.SUM$ (DEST_STMT) - CLOB representation altered
SYS.ATTRIBUTE_TRANSFORMATIONS$ (XSL_TRANSFORMATION) - CLOB representation altered
SYS.METASTYLESHEET (STYLESHEET) - CLOB representation altered
XDB.XDB$RESOURCE (SYS_NC00027$) - CLOB representation altered
XDB.XDB$XDB_READY (DATA) - CLOB representation altered
XDB.XDB$DXPTAB (SYS_NC00006$) - CLOB representation altered
MDSYS.SDO_XML_SCHEMAS (XMLSCHEMA) - CLOB representation altered
Thread 1 advanced to log sequence 3 (LGWR switch)
Current log# 3 seq# 3 mem# 0: /u01/app/oracle/oradata/OML5K/redo03.log
Mon Aug 13 13:13:43 2012
MDSYS.SDO_COORD_OP_PARAM_VALS (PARAM_VALUE_FILE) - CLOB representation altered
MDSYS.SDO_GEOR_XMLSCHEMA_TABLE (XMLSCHEMA) - CLOB representation altered
MDSYS.SDO_STYLES_TABLE (DEFINITION) - CLOB representation altered
SYSMAN.MGMT_IP_ELEM_DEFAULT_PARAMS (VALUE) - CLOB representation altered
SYSMAN.MGMT_IP_REPORT_ELEM_PARAMS (VALUE) - CLOB representation altered
SYSMAN.MGMT_IP_SQL_STATEMENTS (SQL_STATEMENT) - CLOB representation altered
SYSMAN.MGMT_JOB_LARGE_PARAMS (PARAM_VALUE) - CLOB representation altered
SYSMAN.MGMT_SEC_INFO (B64_LOCAL_CA) - CLOB representation altered
SYSMAN.MGMT_SEC_INFO (B64_INTERNET_CA) - CLOB representation altered
APEX_030200.WWV_FLOW_FLASH_CHARTS (CHART_XML) - CLOB representation altered
APEX_030200.WWV_FLOW_FLASH_CHART_SERIES (SERIES_QUERY) - CLOB representation altered
APEX_030200.WWV_FLOW_SHORTCUTS (SHORTCUT) - CLOB representation altered
APEX_030200.WWV_FLOW_STEPS (HELP_TEXT) - CLOB representation altered
APEX_030200.WWV_FLOW_STEPS (HTML_PAGE_HEADER) - CLOB representation altered
APEX_030200.WWV_FLOW_STEP_PROCESSING (PROCESS_SQL_CLOB) - CLOB representation altered
APEX_030200.WWV_FLOW_PAGE_GENERIC_ATTR (ATTRIBUTE_VALUE) - CLOB representation altered
APEX_030200.WWV_FLOW_TEMPLATES (HEADER_TEMPLATE) - CLOB representation altered
APEX_030200.WWV_FLOW_TEMPLATES (FOOTER_TEMPLATE) - CLOB representation altered
APEX_030200.WWV_FLOW_TEMPLATES (BOX) - CLOB representation altered
Mon Aug 13 13:13:54 2012
Thread 1 cannot allocate new log, sequence 4
Checkpoint not complete
Current log# 3 seq# 3 mem# 0: /u01/app/oracle/oradata/OML5K/redo03.log
Mon Aug 13 13:13:57 2012
APEX_030200.WWV_FLOW_PAGE_PLUGS (PLUG_SOURCE) - CLOB representation altered
Thread 1 advanced to log sequence 4 (LGWR switch)
Current log# 1 seq# 4 mem# 0: /u01/app/oracle/oradata/OML5K/redo01.log
APEX_030200.WWV_FLOW_PAGE_PLUGS (CUSTOM_ITEM_LAYOUT) - CLOB representation altered
APEX_030200.WWV_FLOW_PAGE_PLUG_TEMPLATES (TEMPLATE) - CLOB representation altered
APEX_030200.WWV_FLOW_PAGE_PLUG_TEMPLATES (TEMPLATE2) - CLOB representation altered
APEX_030200.WWV_FLOW_PAGE_PLUG_TEMPLATES (TEMPLATE3) - CLOB representation altered
APEX_030200.WWV_FLOW_PROCESSING (PROCESS_SQL_CLOB) - CLOB representation altered
APEX_030200.WWV_FLOW_REGION_REPORT_COLUMN (PK_COL_SOURCE) - CLOB representation altered
APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE1) - CLOB representation altered
APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE2) - CLOB representation altered
APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE3) - CLOB representation altered
APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE4) - CLOB representation altered
APEX_030200.WWV_FLOW_BANNER (BANNER) - CLOB representation altered
APEX_030200.WWV_FLOW_BUTTON_TEMPLATES (TEMPLATE) - CLOB representation altered
APEX_030200.WWV_FLOW_INSTALL (DEINSTALL_SCRIPT) - CLOB representation altered
APEX_030200.WWV_FLOW_LIST_TEMPLATES (LIST_TEMPLATE_CURRENT) - CLOB representation altered
APEX_030200.WWV_FLOW_LIST_TEMPLATES (LIST_TEMPLATE_NONCURRENT) - CLOB representation altered
APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_LIST_ITEM_CURRENT) - CLOB representation altered
APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_LIST_ITEM_NONCURRENT) - CLOB representation altered
APEX_030200.WWV_FLOW_LIST_TEMPLATES (ITEM_TEMPLATE_CURR_W_CHILD) - CLOB representation altered
APEX_030200.WWV_FLOW_LIST_TEMPLATES (ITEM_TEMPLATE_NONCURR_W_CHILD) - CLOB representation altered
APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_TEMPLATE_CURR_W_CHILD) - CLOB representation altered
APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_TEMPLATE_NONCURR_W_CHILD) - CLOB representation altered
APEX_030200.WWV_FLOW_WORKSHEETS (SQL_QUERY) - CLOB representation altered
Mon Aug 13 13:14:08 2012
APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (PAGE_SENTRY_FUNCTION) - CLOB representation altered
APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (SESS_VERIFY_FUNCTION) - CLOB representation altered
APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (PRE_AUTH_PROCESS) - CLOB representation altered
APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (AUTH_FUNCTION) - CLOB representation altered
APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (POST_AUTH_PROCESS) - CLOB representation altered
Refreshing type attributes with new character set information
Completed: alter database character set INTERNAL_CONVERT ZHS16GBK
Mon Aug 13 13:14:11 2012
ALTER SYSTEM disable restricted session;
Mon Aug 13 13:14:12 2012
Thread 1 advanced to log sequence 5 (LGWR switch)
Current log# 2 seq# 5 mem# 0: /u01/app/oracle/oradata/OML5K/redo02.log
Mon Aug 13 13:14:28 2012
Shutting down instance (immediate)
Stopping background process SMCO
Shutting down instance: further logons disabled
Stopping background process QMNC
Mon Aug 13 13:14:29 2012
Stopping background process CJQ0
Stopping background process MMNL
Stopping background process MMON
License high water mark = 14
Stopping Job queue slave processes, flags = 7
Job queue slave processes stopped
All dispatchers and shared servers shutdown
ALTER DATABASE CLOSE NORMAL
Mon Aug 13 13:14:33 2012
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Aug 13 13:14:33 2012
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thread 1 closed at log sequence 5
Successful close of redo thread 1
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Shutting down archive processes
Archiving is disabled
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Mon Aug 13 13:14:34 2012
Stopping background process VKTM
System State dumped to trace file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22163.trc
Mon Aug 13 13:14:36 2012
Instance shutdown complete
Mon Aug 13 13:14:37 2012
Starting ORACLE instance (normal)

All the mesages are dated "Aug 13" which is quite a few months ago ! I see no recent messages.
You have two CREATE CONTROLFILE calls and one alter database character set INTERNAL_CONVERT ZHS16GBK call.
Were these part of a Database Creation using DBCA (The Database Creation Assistant) ?
Hemant K Chitale

Error in reports after database restart

Hi,
I am making reports using OBI with oracle 10.1.0 . I made some charts, pivot tables
and some graphs. these are working fine until i restart the database. when i restart the
data base the tables are show again at dash board but all pictorial type reports not work
untill i make them again.
it gives me error like
No connection could be made because the target machine actively refused it. [Socket:888]while table by the same query is giving result. only graphical thing give error even after i
redraw them.
Thanks

Step 1: Create Cachepurge.txt file with following command.
call SAPurgeAllCache();
Step 2: Tranfer this Cachepurge.txt file to this path (It can copy to
anywhere)
D:\oracleBI\server\Bin
Step 3:
Go to Command Prompt
cd D:\oracleBI\server\Bin
nqcmd -d Analyticsweb -u Administrator -p Administrator -s D:\oracleBI\server\Bin\Cachepurge.txt -o D:\output.txt
-u --> User
-p --> Password
If you install OBIEE in C: please replace D: with C:
Thanks,
Chandra

JDBC Sender Adapter polling after database failure

Hi,
I hope you can help, we have come across 2 instances where a database which is being polled by the JDBC adapter fails. When the database comes back up valid entries are not processed. The first instance of this was with a connection to an AS/400 based system in our test environment. The second instance was a MS SQL Server based system in our productive environment. As you can see the issue seems to be driver independent and not related to our specific XI server which is XI3.0 sp16. We can get things working again by a) restarting the J2EE server or b) Copying the communication channel and using this in our sender agreement.
Clearing caches, deactivating and reactivating the communication channel and sender agreements etc did not work.
Thanks,
Pete

Peter,
Is the Database system going to be turned off / bounced back very often?
If yes, in the JDBC adapter, in Advanced Mode, select option "Disconnect from database after each message processing" and this will do the trick.
regards
Bhavesh

"WARNING! Closed connections to peer [standby IP] database! Please restart peer node to bring databases in sync!!"

i have a two appliances of NAC Manager, i want to make a failover, but i only connect them with a crossover cable on eth1,
is it neccesary conect a serial cable?, because when i try to verify a failover they appear this:
“WARNING! Closed connections to peer [192.168.0.254] database! Please restart peer node to bring databases in sync!!” in each one

Hi. I had a lot of those messages. In my scenario the failover bundle works OK during certain time but ocassionally the hearbeat fails (never knew why) and the warning messages appeared. Since there's no sync anymore the config in both manager will be different, so the very first thing to do is to backup the configuration. Please notice if the current active NAM is the primary or the secondary NAM (it's necessary to know this information for the later steps).
Then you will have to stop both NAM (service perfigo stop)
Now there's an extra step only if the last active NAM was the secondary : you will have to restore the backup into the primary NAM (since this NAM will have an outdated configuration).
Now back to the regular steps. You must start both NAM . The primary NAM will be the new active , synchronization will take some minutes, after that the "warning" will be cleared.
Please rate if it helps.

The installation of my CS5 Design Premium has "Inconsistency in the installer database. Please restart your computer and install again."

I am having problems installing the CS5 Creative Suite on to my MAC. After the install, a message comes up that reads, "Inconsistency in the installer database. Please restart your computer and install again." I then restart my computer and still cannot install it. Please help.

even though this is for cs3, go through the suggestions,
Error "...Installer Database is Corrupt..." when you install Adobe Creative Suite 3 products

Error deploying process after database migration in SOA11g

Hi all,
I am working on SOA11g and weblogic 10.3
we recently shifted my database server to another ip and reconfigured the ip settings in each of the soa datasource through weblogic console.Initially on starting the server it gave B2b init error but it started working properly after we restarted the application and the DB server.
But now my problem is whenever i deploy any process that has an expression(for eg. an email activity in which i am getting the reciever's list from the database using a lookup query),*it throws an error and the stack trace is as given below:*
[2011-02-08T13:03:33.220+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.compiler] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <BPEL1Processor::generateProcessClass> MerchantSales_BPELProcess.bpel(line 228): invalid query[[
query "/EmailPayload/ns3:FromAccountName" is invalid, because java.lang.IllegalArgumentException: null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService [Cause=null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService]
Check the XML schema and make sure your query string is valid
[2011-02-08T13:03:33.448+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.deployment] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <CubeProcessLoader::create> [[
java.lang.Exception: BPEL compilation failed
     at com.collaxa.cube.lang.compiler.BPEL1Processor.generateProcessClass(BPEL1Processor.java:529)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:495)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:438)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.createCubeProcess(BPEL1Processor.java:396)
     at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProcessFactory.java:61)
     at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProcessLoader.java:112)
     at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:238)
     at com.collaxa.cube.engine.deployment.DeploymentManager.deployComponent(DeploymentManager.java:182)
     at com.collaxa.cube.ejb.impl.CubeServerManagerBean._deployOrLoadComponent(CubeServerManagerBean.java:726)
     at com.collaxa.cube.ejb.impl.CubeServerManagerBean.deployComponent(CubeServerManagerBean.java:114)
     at com.collaxa.cube.ejb.impl.bpel.BPELServerManagerBean.deployComponent(BPELServerManagerBean.java:85)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
intially i thought it might be a problem with the query but then i tried a simple expression(assigned the task no. attribute of my human task to my output var) it still threw an error and that stacktrace is pasted below:
[2011-02-08T13:53:50.735+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.compiler] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4NcPSBLA1LzuP5iW1DKEXf001p^f,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-0000000000002cc2] <BPEL1Processor::generateProcessClass> S_Exp.bpel(line 107): invalid query[[
query "/taskservice:initiateTask/task:task/task:priority" is invalid, because java.lang.IllegalArgumentException: null schema location for ns=http://xmlns.oracle.com/bpel/workflow/taskService [Cause=null schema location for ns=http://xmlns.oracle.com/bpel/workflow/taskService]
Check the XML schema and make sure your query string is valid
[2011-02-08T13:53:50.749+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.deployment] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4NcPSBLA1LzuP5iW1DKEXf001p^f,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-0000000000002cc2] <CubeProcessLoader::create> [[
java.lang.Exception: BPEL compilation failed
     at com.collaxa.cube.lang.compiler.BPEL1Processor.generateProcessClass(BPEL1Processor.java:529)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:495)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:438)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.createCubeProcess(BPEL1Processor.java:396)
     at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProcessFactory.java:61)
     at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProcessLoader.java:112)
     at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:238)
     at com.collaxa.cube.engine.deployment.DeploymentManager.deployComponent(DeploymentManager.java:182)
     at com.collaxa.cube.ejb.impl.CubeServerManagerBean._deployOrLoadComponent(CubeServerManagerBean.java:726)
     at com.collaxa.cube.ejb.impl.CubeServerManagerBean.deployComponent(CubeServerManagerBean.java:114)
     at com.collaxa.cube.ejb.impl.bpel.BPELServerManagerBean.deployComponent(BPELServerManagerBean.java:85)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
I am in fix as i really am not able to understand what might be the problem,
thks for the help in advance..
Regards
Ajay.v
[email protected]
Edited by: Aj**** on Feb 9, 2011 2:38 PM

Hi Jean-Pierre,
Thanks for your help,
Grant WHAT to OWF_MGR user?
I couldnt find the package named 'WB_RTI_WORKFLOW_UTIL'
in OWF_MGR but I cound find 'WB_RT_WORKFLOW_UTIL' package in it.
Is this some problem in my OWF_MGR schema?
Any help will be greatly appreciated,
Thanks,
Shree

Connecting to an Oracle database after clicking on a foi

Does anyone know how or have any examples on how to connect to an oracle database after clicking on a 'feature of interest' in MapViewer? I want to be able to click on a 'feature of interest' on the map, and have a list of records from an oracle table displayed using the identified key of the foi. I am able to create the feature of interest, and add the event listener for 'mouse click', but am unsure how to connect to the database at this point. I have been able to connect to the database in a different jsp, but not from here. Thank you.

1. Create a JSP page that does the database query. It should take the foi id as an input parameter.
2. In the foi mouse click listener, display the JSP page in iframe. The iframe can be placed outside the map or inside the info window. The function should do something like this.
function myClickListener(point, foi)
mapview.displayInfoWindow(point, "<iframe id='my_iframe_id' frameborder=0 width=300px height=400px />", 300, 400) ;
var myIframe = document.getElementById("my_iframe_id") ;
myIframe.src = "http://myhost/myjsp?key=" + foi.id ;
}

After adding seperate performance collections to MAP 9.1 database, the database has become corrupted

Hi,
I have installed MAP 9.1(9.1.265.0) on my notebook, with Windows 7 Enterprise. The inventory of our environment was successfull and I have successfully added some performance collections to the database.
First I ran the performance collection for one hour, then added a performance collection of one week. this was okay.
Then I waited one week and added another collection of about five days. That collection would not stop: It was scheduled to run between 2014-07-28 12:49:31 until 2014-08-01 05:00:04. But it was still running at 2014-08-01 05:30:25. I waited for a little
bit longer, but the collection kept on running according to the status screen.
So I cancelled out of the collection at 2014-08-01 05:45. In the performance data it said that the colection ran from Jul 14 2014 08:04 AM until Aug 1 2014 4:57AM. So that looked okay.
But now, when I try to Get the performance metrics data from MAP, it states that I have to do a "Refressh Assessment", because I problably have cancelled out of a collection. This "Refresh Assessment" wil run for about an hour and than
completes with a message "Failed"
I get these errors in the MapToolkit.log
<2014-08-05 05:14:51.09
AssessInventoryWorker@StoredProcAssessment,I> RunAssessment() - [Perf] [[Perf_Assessment].[ClearPerfdata]] : 125 ms
<2014-08-05 05:14:56.13
AssessInventoryWorker@StoredProcAssessment,I> RunAssessment() - [Perf] [[Perf_Assessment].[CreateTimeIntervals]] : 5039 ms
<2014-08-05 05:22:47.76
AssessInventoryWorker@StoredProcAssessment,I> RunAssessment() - [Perf] [[Perf_Assessment].[CreateMetricsPerTimeInterval]] : 471591 ms
<2014-08-05 05:52:54.66
AssessInventoryWorker@DataAccessCore,W> DoWorkInTransaction<T>() - Caught InvalidOperationException trying to roll back the transaction: This SqlTransaction has completed; it is no longer usable.
<2014-08-05 05:52:54.79
AssessInventoryWorker@DataAccessCore,W> DoWorkInTransaction<T>() - Caught a SQL transaction timeout exception. Will retry 3 more time(s). Retrying in 5000 milliseconds.
<2014-08-05 05:53:15.86
AssessInventoryWorker@DataAccessCore,W> OpenConnection() - Caught a SqlException trying to connect to the database. Will retry connection 3 more time(s). Retrying in 5000 milliseconds.
<2014-08-05 05:53:20.99
AssessInventoryWorker@DataAccessCore,W> OpenConnection() - Caught a SqlException trying to connect to the database. Will retry connection 2 more time(s). Retrying in 10000 milliseconds.
<2014-08-05 05:53:45.00
AssessInventoryWorker@DataAccessCore,W> OpenConnection() - Caught a SqlException trying to connect to the database. Will retry connection 1 more time(s). Retrying in 15000 milliseconds.
<2014-08-05 06:24:03.69
AssessInventoryWorker@DataAccessCore,W> DoWorkInTransaction<T>() - Caught a SQL transaction timeout exception. Will retry 2 more time(s). Retrying in 10000 milliseconds.
<2014-08-05 06:54:13.91
AssessInventoryWorker@DataAccessCore,W> DoWorkInTransaction<T>() - Caught a SQL transaction timeout exception. Will retry 1 more time(s). Retrying in 15000 milliseconds.
<2014-08-05 07:24:28.99 AssessInventoryWorker@Analyzer,E> RunAssessments() - Assessment threw an exception:
<2014-08-05 07:24:29.03
AssessInventoryWorker@AssessInventoryWorker,I> AssessmentCompletedEventHandler: Assessment completed event.
<2014-08-05 07:24:29.09
AssessInventoryWorker@TaskProcessor,I> WorkerCompleted: Worker: 'AssessInventoryWorker'
<2014-08-05 07:24:29.15 TID-16@TaskProcessor,I> Run: Completed. Status: Failed
Is there maybe a restriction to the intervalls of adding performance collection data, or is there something else I am doing wrong?
(I made a backup of the database after the first week of performance data, that database is still usable, so I can try to add more performance collections to that version of the database)
I hope someone has an idea what is going on.
Thanks!

Time between isn't the problem. If you look in the log file, SQL is timing out. I think the problem is machine resources and time related. After the performance data collection has run for the predefined amount of time, MAP has SQL execute various assessments
on the data to aggregate the raw data into something MAP can use. The more raw data that exists, the longer SQL will take and the more CPU and memory resources SQL will need.
I would recommend that you have at least 4 cores or vCPU's and 6-8 GB of memory dedicated to the machine on which MAP is running. I would also follow the directions in this Wiki article to increase the timeout in MAP so that MAP will give SQL the time it
needs to complete the job.
http://social.technet.microsoft.com/wiki/contents/articles/10397.map-toolkit-increasing-the-sql-database-timeout-value.aspx
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

Copying data to another database after little transformation

Hi,
Is there any better pattern for
copying data from one database to another database after some little transformation(can be simple SQL join).
I see couple of options like..
1. Using materialized views
2. Writing a simple procedure to do copy and transformation.
3. Using a pure ETL tool.
Is there any other simple and secure way of doing this ?
Thanks in advance,
Vijay.
Message was edited by:
user487780

Hi Justin,
A couple of questions
1) Are you copying from an Oracle database to another
Oracle database? Or are there non-Oracle databases
involved?I am copying from Oracle to Oracle.
2) Are there just two databases? Or more?Only two.
3) Are you copying all the data from one database to
another? Or are you copying just a subset of data?I just need to copy a subset(can get using SQL join) of data
4) How frequently does the data need to be copied?exactly 500 times, but at different intervals..
How soon after the data changes in the source system
m does in need to be changed in the destination
system?the copying process has to be triggered based on some data in source database.
5) Is the data flowing in only one direction?Yes
6) Is there some drawback to the three options you've
outlined that you're trying to avoid? If one of
these options meets all your requirements, I'd assume
that you wouldn't bother posting a question. That
implies to me that there is some unstated requirement
that you're trying to meet...I just want to know, whether there is any standard(typical) way to do this.
Thanks,
Vijay.
>
Justin

Creating database after installing oracle 10.2 on solaris 10

Hi,
I installed oracle 10.2 on solaris.
after installation is completed i started dbca to create a database.
i mentioned all the details, after i click finish button, one window will open , in that all database details will be mentioned, when i click on that window, it will become invisible and that same dbca will remain same, actually after clicking ok it has to start creating database.
but here it is going back to that dbca windows and in that back,cancel,finish button is there.
why this problem is coming
why it is not creating database after i clicked on finish botton,
please help me, it is very critical, i want to create database and i want to submit to the client project.
Regards,
Veeresh S

ya, i clicked in finish and one html window opened, in that also i clicked ok, after nothing will work, no messages,no errors,no logs created.
i want to submit this to 1 project, but i am stucked here,
and solaris server is 64 sparc
and i installed oracle 10.2.0.1 64 bit for sparc 64
now this is not working.
can i install oracle 10.2.0.2 x86 in this sparc 64 bit server

Unproper ADF BC behaviour after database exception

Hi,
A have a problem with ADF session.
I use ADF Business Components in my application and generally it works good.
Unfortunatelly I experience problem when I face database exception (i.e. packages I use are not compiled). I catch such an exception in my web application, but unfortunatelly there is something wrong with views or business components because I get unproper results (usually no records at all). It's a problem connected with all views in application and it is not connected with the exception directly.
The only thing that helps is logout and login (which resets ADF session).
Is there a problem with database session, adf session or some connections settings/states ?
Could you explain what is the reason for that behavior and tell me if it is a way to make application work with relogin after database error ?
Thanks in advance
Marcin

Hi,
no, there is not. From the description you give its hard to determine whats going on there, but at least I can offer a pointer to the developer guide to learn about best practices. Maybe this helps solving the issue http://download-uk.oracle.com/docs/html/B25947_01/toc.htm
Frank

Creating new databases after latest security patch applied

10.2.0.4
If I create a database AFTEr applying the opatch for the October 2009 security patch, do I need to also run:
@catbundle.sql cpu apply
Or is it included in the create database? I use the DBCA to create new databases.

user8574962 wrote:
This is what Oracle states on metalink doc id: 422303.1
Once the bundle patch or the Critical Patch Update (CPU) patch is applied on an ORACLE_HOME should you run post-installation scripts for every newly created Oracle database using the same ORACLE_HOME?
Solution
This should be documented in the patch's README as the answer will vary with each patch.
If the patch's README is not documented, then the Post Install tasks should be run.
And this is what the OCTCPU09 README says:
3.3.3 Post Installation Instructions for Databases Created or Upgraded after Installation of CPUOct2009 in the Oracle Home
These instructions are for both non-RAC environments and RAC environments when a database is created or upgraded after the installation of CPUOct2009.
You must execute the steps in Section 3.3.2.1, "Loading Modified .sql Files into the Database" for any new database only if it was created by any of the following methods:
Using DBCA (Database Configuration Assistant) to select a sample database (General, Data Warehouse, Transaction Processing)
Using a script that was created by DBCA that creates a database from a sample database
Hope that helps.Point taken that it could vary by patchset, but those particular instructions quoted square exactly with what I had said. To quote with emphasis:
"You must execute the steps . . . for any new database *only if* it was created by any of the following methods . . ."
And what are those methods? Creating the database from a sample (pre-patch) database. If one uses dbca to create a 'custom' database, the resulting scripts will start from scratch with a CREATE DATABASE command - no pre-patch version sample or seed database involved.
:-)

Reconnect to portal database after database restart

Similar Messages

Maybe you are looking for