Record has been changed by some other user

Hi All,
i am working on a network when i make some update in my database through a form on first updation it works fine, while on second updation it gives me an error 'Record has been changed by some other user' wile no other user is currently working on the same form.
Plz tell me what i can do.
Wating 4 your reply.
Thanks in Advance.

You probably have a database trigger which changes the value of a column which is also part of your form.
The solution depends on the version of Oracle forms and the database that you are using.
Oracle forms 6 introduced a DML returning value (block level) which you can set to Yes so that the value(s) changed by the server will automatically be updated within the form. However, you must be running against an Oracle8 (or later) database for this to work.

Similar Messages

The record has been changed....on default form

Hi,
I'm facing a strange problem....
Trying to alter the prompt in the menu default form, for one and only one record, the message "The record has been changed.Re-query to see the changes." appears...!!!
I have seen this message on custom forms.... but on default form which also insists even when i close the form and re-open it..., first time....
What do you suggest me to do...???
Note: I use eBS 11.5.10.2 and DB10g v.2
Thank you,
Sim

Hi sgalaxy,
It looks the system is detecting something different between the record shown in the form and the record stored in the DB table, and that's why it's showing the error message. Typically the issue is caused by date columns that are truncated in the form or by trailing spaces in text columns. You will need to compare columns in form and DB table until you find the problematic column and update it manually (truncating date or removing trailing spaces in DB)
Hope it helps.

OVM-2008 The Server Pool Master has been registered with some other pool

I am getting this error, while creating my first ever server-pool.
Check prerequisites to create server pool (First-Pool) failed: (OVM-2008 The Server Pool Master (172.16.0.37) has been registered with some other pool, and can not register it again.)
Any idea what can be going wrong?
regards, Yora

The only time I've seen this is when the server really has been registered with another pool. You need to clean out the local ovs-agent database at */etc/ovs-agent/db* and restart the agent.

It appears to my that a Zynga toolbar that I had installed months ago has been replaced by some other toolbar, possibly Russian, possibly from someone in Savannah Georgia. How can I get rid of it and get my Zynga toolbar back?

I see a toolbar that has some links to a Russian url (rockhomi.ru) and some buttons in Cyrllic and a button indicating weather conditions in Savannah, Georgia. That toolbar has replaced my Zynga game toolbar (it is called the Zynga toolbar under the view/toolbar menu but it is not)

I opened Firefox after a couple of hours offline and the Zynga toolbar has returned so you can close this issue if you want.

Error while updating a task - Task acquired by some other user

Hi,
I have a task assigned to a Group (AdminGroup). To update the outcome of task ie to approve task i am first acquiring the task and then updating the task outcome.
But while doing so i am getting following error:
Invalid action on workflow task.
Action OUTCOME_UPDATE on task 101d12624092f7d9:-1f79044d:124e34e8057:-7b4e is not valid because of The task has been acquired by some other user..
Contact oracle support if error is not fixable.
at oracle.bpel.services.workflow.task.impl.TaskService.performPreActionValidation(TaskService.java:3408)
at oracle.bpel.services.workflow.task.impl.TaskService.updateTaskOutcomeAndEvaluateRoutingSlip(TaskService.java:1074)
at oracle.bpel.services.workflow.task.impl.TaskService.updateTaskOutcome(TaskService.java:941)
at oracle.bpel.services.workflow.task.impl.TaskService.updateTaskOutcome(TaskService.java:920)
at oracle.bpel.services.workflow.task.ejb.TaskServiceBean.updateTaskOutcome(TaskServiceBean.java:410)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAs(Subject.java:396)
at com.evermind.server.ThreadState.runAs(ThreadState.java:622)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiresNewInterceptor.invoke(TxRequiresNewInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at TaskServiceBean_RemoteProxy_68d4144.updateTaskOutcome(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
The code that i am using for updating the task outcome is as follows:
The error should not come as the context of user is same for acquiring and updating.
IWorkflowContext wfCtx=wfSvcClient.getTaskQueryService().authenticate("oc4jadmin", "oc4jadmin",
               "jazn.com", "admin");
               ITaskService objITaskService=wfSvcClient.getTaskService();
               objITaskService.acquireTask(wfCtx, strTaskID);
               objITaskService.updateTaskOutcome(wfCtx, strTaskID, "APPROVE");
Here admin is the user that belongs to group AdminGroup and the task is assigned to AdminGroup.
It was working fine a week ago on the same enviornment but from past few days am getting this error.
The BPEL version is 10.1.3.0.
Help appreciated!!
Regards,
Bhavik

hi,
Thanks Marc for the reply.
Before acquiring the task , I have checked the acquiredby column in wftask table in orable schema and its value is null.
So it allows me to acquire the task. The error that i am getting is on updating the task outcome.
While updating it is giving error as: task already acquired by some other user.
This should not happen as the workflow context that i am using for acquiring the task and updating the task is same.
Regards,
Bhavik

FRM-40654 Record has been updated by another user.Re-query to see change.

Hi All:
While Updating a record in form its updating fine at first time
if i updating the record second time its not allowing me to update its showing following error
FRM-40654 Record has been updated by another user.Re-query to see change.
After Re-querying its allowing me to update the record .... so anyone can give a good idea to update the record without Re-query.
i am using following versions
Apps 11.5.10.2
Forms 6i
Database 10g

@814950,
Welcome to the Oracle Forums. Please take a few minutes to review the following:
<ul>
<li>Before posting on this forum please read
<li>10 Commandments for the OTN Forums Member
<li>Announcement: Forums Etiquette / Reward Points
</ul>
It is not good to use someone else's post to ask a new question; this is commonly refered to as "Post Hi-jacking." It is always best to create a new post and add a reference link to a similar post. Please create a new post for your question!
Also,
>
BEFORE I NSERT OR U PDATE
OF quantity, price_override
ON po.po_line_locations_all
>
If I recall correctly from when I worked with the Oracle Enterprise Business Suite (EBS), the PO_LINE_LOCATIONS_ALL is an EBS ta ble. Oracle does not recommend you modify EBS tables directly. There are recommended methods for performing DML on EBS tables. I suggest you review the Oracle Applications Documentation library. Select your EBS version and then scroll to the Standards section and review the following documents:
<ul>
<li>Oracle Applications Developer's Guide
<li>Oracle Applications User Interface Standards for Forms-Based Products
<li>Oracle Application Framework Personalization Guide
</ul>
Again, please ask your question in a new post.
Craig...
Edited by: CraigB on Dec 1, 2010 9:29 AM

Form based on a view - FRM-40654: Record has been updated by another user.

Hi All,
I am hoping that somebody can help me with this problem that is occurring only when I try an update a record in forms.
I have a block based on a join-view, I can insert no problems, but I can only update certain records within the block. If I come across a second record that is similar to the first except for primary key and a couple of other values and try and update that record forms gives me the following message FRM-40654: Record has been updated by another user. Re-query to see change.
The first record I have no problems in updating and I have followed a number of suggestions to get this to work, like setting the key-mode of the block to updateable/non-updateable and setting the primary key to 'yes' for some of the database items. I have also created procedures within the database that are called by triggers on-insert, on-update etc.
If anybody has any ideas how I can solve this I would be happy to hear your suggestions.
Thanks in Advance.
Regards,
Scott.

Scott,
beside of
1) In the block properties change the Key Mode property of the block to be Non-Updatable Primary Key
2) Mark one or more columns as Primary Key in the item Property Palette - in this instance you would set the property for Empno.
Enforce Primary Key = no
Key Mode = Unique
Update Changed Columns Only = Yes
I found a bug entry that is supposed to be fixed in Patch 9 of Forms 6i (assuming you are running 6i). So if you could try with a more recent Patch set (e.g. 14) then probably the problem will go away.
Fran

How do you search through configured Alternate Extensions to correct error message : The phone number or extension has already been assigned to some other object.

When configuring a new Unity Voicemail Account I receive this message : The phone number or extension has already been assigned to some other object. I understand that this means that the 10 digit number I am trying to configure as the alternate extension for this user is already configured for another object with Unity.
I need to search by the 10 digit number and determine where it is configured so I can change it and map to the correct end user.
I have attempted to to search Users via DTMF Access ID using the 10 digit number with nothing being returned via that search.
How do I Search all of the copnfigured Alternate Extensions within our Unity Server?

A subscriber info dump is likely the fastest way. If you're curious regarding other methods, you can also use the Data Link Explorer (CUDLE) tool which is in the Cisco Unity Tools Depot. All extensions for all objects are referenced in the "DTMFAccessId" table. The View menu has a Query Builder which you can use to compile a SQL query that searches for a digit string. It's best to search for both the 10 digit string as well as an abbreviated string as Unity sees them essentially the same and they are usually should be associated with a single subscriber. Once you find a match, you can use the "ParentObjectId" value associated with the DTMF access ID to look for a matching owner in the "GlobalSubscriber" table. The ParentObjectId should match the SubscriberObjectId for a subscriber (assuming the DTMF access ID is assigned to a subscriber). This is the same thing as looking at SQL; however, you are not directly accessing the DB so this is generally considered the safest way to browse and get a feel for where things are.
Hailey

Any existing function to validate an item when other item has been changed?

Any existing function to validate an item when another item has been changed? Because these 2 fields are related. When one filed is changed, the other one should be blank and let the user to input again. I am using oracle custom.pll library.
Any ideas?
Amy

Hi Vikram,
Thanks for posting your issue,
You can switch of alerts and set E-Mail Notification to Yes under your Workflow Tasks list > Settings > Advanced Settings. By doing so user specified in AssignedTo will receive e-mail notification when task is created and if task ownership is not changed
during your workflow this will be the only mail sent by system.
Since you are already using SharePoint designer you also have option to include Send an Email action in your workflow (after task is created). This option is better if you want to send some specific info to user.
Also, browse the below mentioned URLs to create workflow step by step
http://sharepointsolutions.com/sharepoint-help/blog/2010/03/create-a-detailed-custom-task-notification-with-a-sharepoint-designer-workflow/
http://sharepoint-community.net/forum/topics/configure-email-notification-for-discussion-board-activity
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

"FRM:40654 Record has been updated by another user" - Error in POST-QUERY

Hi,
I'm using Forms version 6.0.8.26.0
In one of the forms, its data block is based on a view.
In POST-QUERY trigger, I try to change the value for a database item. This operation results in following error:
"FRM-40654: Record has been updated by another user. Re-query to see change."
After this message the value of the item is automatically being set back to what was queried from the DB.
I tried setting the DML Returning Value to 'Yes'. It doesn't help :(
Any suggestions please?
Thanks,
Usha

Hy
try to set key-locking delayed
and check
if one field from the view as primary key
or
manually create On-Update, On-Insert, On-Delete and On-Lock triggers
or
write an INSTEAD OF TRIGGER

Error!!!! Record has been updated by another user

dear all
Why i got this error when i put a value and try to write to a text item. i never change insert update etc in property pallete..
this error appear.
FRM-40654 Record has been updated by another user . requery to see change?
give me advise and suggestion why i got this error..

This message have several different causes. One cause is what wilfred indicated.
But I've seen this message appear if there's something wrong with a primary key, and I've seen it occur when doing a post command using a master-detail block. In the latter case, you need to requiry the other tables in your form.
In your case since you are using only one block, I'd look for a problem with your primary key.

After installing new operating system software, my user account name has been changed and i don't know the password.

i need help!
I just installed Mac OS Maverick in my laptop, but when i checked the Users&Groups There are only 2 User name 1 is "Apple(admin) and 2 is Guest, my user account name has been changed even the password. how can i retrieve my old user account name and password or how can i changed it?

Here's an updated set of instructions you can try:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then save any photo stream photos that you wish to keep to your camera roll (unless using iCloud Photo Library). When finished go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

Here's a fix for "This item cannot be updated because it has been changed by another user or process"

https://gallery.technet.microsoft.com/System-Center-Service-fca7af29
A few months ago on the Technet Gallery, I submitted this custom control to be used on SCSM console forms. The purpose of the control is to eliminate the "This item cannot be updated because it has been changed by another user or process" error
message that we all have seen at least once (a day :) ).
The details are in the gallery description (along with installation instructions for existing forms and your own custom forms).
Here's a "short" description (nothing I ever post here is short :) ): This is a custom control that can be applied to an SCSM form like the Service Request form or Windows Computer form or your own custom form built with the authoring tool or Visual
Studio. When you click "OK" or "Apply" on the form, this control scans the form and Service Manager's database for any changes to the object you have open. If a property that _you_ have changed on the form was _also_ changed in the CMDB
(by a workflow or another user), this control will present a dialog box letting you know what happened. It will also let you choose which value to keep (yours, theirs, or the original value).
Just as importantly (and important in a greater percentage of cases), if a workflow changes a "background" property (like FirstAssignedDate) while you have the form open and you click OK, the control will detect the change and allow the form submission
to go through while keeping your changes and the FirstAssignedDate change that the workflow made. You won't get an error message or even a warning. And most importantly, you won't lose your changes.
That's where the "optimistic" part of the control's name comes from. It applies optimistic concurrency control to SCSM forms, while also providing an anti-collision interface for you to use so you no longer lose any of your changes.
Furthermore, this control will work on related items that are opened in memory; for example, the activities on a Service Request. So if you change an activity's title while the workflow engine sets it in progress, you won't get an error. The activity will
be in progress and will get your new title when you click OK or Apply.
Lastly, (and I admit this part is getting into the deep inner workings of console forms) if your form loads a sub projection at run time (to the root object) this control will detect the load and treat that sub projection as if it were apart of the original
form all along.
I've gotten a little feedback about this control, but I'd like to get more since it's a work in progress. So, I'm announcing it here on the forums. Please give it a try and let me know if you have any questions. I'll be happy to answer them here. Thanks,
folks!
Oh, and to answer the most common question right away: It's free. There is no paid version or anything like that. This is something I built for the SCSM community.

Great job!
Will definitely try it out.
Best regards,
Marcus

HT5622 Good day to advise you that I forgot security questions, email your questions to re-password security has been compromised by some persons illegitimate since the change

Good day to advise you that I forgot security questions, email your questions to re-password security has been compromised by some persons illegitimate since the change.
<E-mail Edited by Host>

Apple does not respond here. Do not put email addresses in posts here. The world will see it.

I keep getting a warnin that my pages document could not be auto saved. The file has been changed by another application. Click save anyway to keep your changes and save the changes made by the other application as a version, or click revert to keep the c

I keep getting a warning stating that the document could not be auto saved in pages. The file has been changed by another application. Then it says click save any way to keep your changes and save the changes made by the other application as a version, or click revert to keep the changes from the other application and save your changes to a version.
What in the heck does all that mean, and why are they trying to behave like a Windows product or a Microsoft office product. I just don't get it.
Why is another application changing my documents? It's like they've created a virus within their own programs. It's a pain in the neck and makes no sense.

I am also having the issue of a warning saying "could not be auto-saved in Pages. The file has been changed in another application. I then hit "save anyway", the warning will go away for a time, sometimes minutes, sometimes hourr, but then the warming reapprears saying the same thing. This is not the case with all Pages documents but it is the case with many.
Working with a Retina Macbook Pro and current software
These are newly created documents

Record has been changed by some other user

Similar Messages

Maybe you are looking for