Record should be repated with remaining value

Hi,
Can anyone tell me the logic ASAP, if the value is greater than 99, it should repeat the record with the remaining value.
ex: result is 250, it should be split in 3 records, like the following:
1: 99
2: 99
3: 52
Thanks,
Madhu

Hi madhu,
check this...
DATA : BEGIN OF itab OCCURS 0,
        num(2) TYPE p DECIMALS 0,
       END OF itab.
DATA: values TYPE i,
      remain TYPE i.
itab-num = 250.
APPEND itab.
LOOP AT itab.
  IF itab-num > 99.
    PERFORM split USING itab-num.
  ENDIF.
ENDLOOP.
LOOP AT itab.
write :/ itab-num.
ENDLOOP.
*&      Form  split
FORM split USING result.
  values = result / 99.
  remain = result MOD 99.
  itab-num = remain.
  MODIFY itab INDEX sy-tabix.
  values = values - 1.
  DO values TIMES.
    itab-num = 99.
    APPEND itab.
  ENDDO.
ENDFORM.                    "split
Edited by: Perez C on Jan 2, 2008 2:11 PM

Similar Messages

  • Issue with fetching a record from IHPA table with PARNR value as condition

    Hi All,
    I am trying to fetch a particular record from IHPA table where i am giving the OBJNR number, PARVW and PARNR as customer no. , But I am not getting any record  but if i will give OBJNR and PARVW it will generate a record with having same PARNR value.
    Example :
    case 1st :-
    when i am passing following values in IHPA table,
    OBJNR  = IE000000000010070910
    PRAVW = BP                 
    PARNR  = 620000562   
    it is not generating any record  
    case 2nd:-
    But if i will pass  
    OBJNR  = IE000000000010070910
    PRAVW = BP
    it will generate a record?(one row) which will include PARNR as same 620000562 along with other value.
    Q1 -  Why it's not generating in case 1st,
    Q2 - How I will resolve this issue ? as i have to link some table as EQUI -
    IHPA -
    VCKUN
    VCNUM ?
          I have written a code for this to join :
         SELECT A~EQUNR
           B~PARVW
           C~CCNUM
           D~CCNUM
           FROM EQUI AS A JOIN IHPA AS B ON AOBJNR = BOBJNR
           INNER JOIN VCKUN AS C ON BPARNR = CKUNNR
           INNER JOIN VCNUM AS D ON CCCNUM = DCCNUM
           APPENDING CORRESPONDING FIELDS OF TABLE IT_OBSO
           WHERE A~EQUNR IN S_EQN.
                 AND PARVW  = 'BP'.
          But it is not generating any record but when i am commenting the PARVW i am getting the mixed record of PARVW as (BP,SP,SH)
    Let me know if any more clarification required.
    Highly appreciate your help
    Thanks & Regards
    Shaw

    Hi Santosh,
    Thanks for your quick response.
    But I am Sorry, I already checked with putting Zero before PARNR.
    The issue is still as it is.
    Thanks
    Shaw

  • Confusion with star_schema_enabled value

    Hi,
    At one production environment I have observed that the STAR_SCHEMA_ENABLED parameter is set at TEMP_DISABLED value. Since the environment is DWH so I think it should be set with TRUE value.
    While discussing this with colleagues some suggested that both are almost same and there would not be any performance benefit. As per them with bitmap indexes (our environment has plenty of them) the value TRUE against the mentioned parameter would not be of much help.
    My understanding from oracle docs was that even with bitmap indexes the value TRUE should optimize the star query performance. Our data model is in 3nf form.
    I would be really grateful to you if this concept is illustrated with some examples.
    Thanks for your valuable time.
    Regards,
    Joy

    well, the formula you provided is correct and should return the correct result
    its hard to say why it would return wrong results without knowing/seeing the data
    the only thing i could think of is the following:
    a customer made two sales 1) with Sales=123 2) with Sales=0
    the formula would of course count that customer as a distinct customer with Sales=0
    maybe thats the reason for your "wrong" results?
    you may also check this link: http://www.daxpatterns.com/distinct-count/
    hth,
    gerhard
    Gerhard Brueckl
    blogging @ http://blog.gbrueckl.at
    working @ http://www.pmOne.com

  • Pharma: shelf life with remaining 4 months should not be considered for planning

    Hi,
    Implementation in Pharma : FG Shelf life with remaining 4 months should not be considered for FG planning.
    How to exclude this stock while planning for FG. FG planning is Make to stock.
    BR
    Subbu.

    Hi,
    Thanks to Caetano, Kumar & Mani..
    We have achieved this with below with customized program....
    Exclude those batches from MRP run whose difference between the (expiration date &
    current date ) is less than or equal to its procurement time mention in MRP-2
    view of material master.
    Before running MRP, one need to execute the program with following option:
    Input data will be plant, material type or list of material:
       System should execute following logic:
    1) In a plant list all material with given material type
    2) Execute the BAPI for find out the characteristic value of EXB_MRP from class
    type 001of material class (BAPI_OBJCL_GETDETAIL_KEY)
    3) If EXB_MRP = Y , then list out all such material.
    4) For such a material identity those batches which are available in stock other
    than ‘9999’
    5) All such batches characteristic of shelf life expiry date need to be derived
    from BAPI
    6) Calculate ( Expiry Date  - Today’s Date)
    = Difference
    PLIFZ  ), batch of
    the material will be transferred to the 9999 storage location which will be
    excluded from MRP run.
    PLIFZ  ), batch of the material will be transferred
    to the 9999 storage location which will be excluded from MRP run.
       7) Run the MRP on materials
       8) Transfer posting from 9999 storage location to original storage location :
    Selection criteria
       On execution transfer the material back to required storage location.
    BR
    Subbu.

  • How to suppress records with vzero value in a union report in OBIEE?

    Hi
    I have a Union report ,Rep1 union Rep 2,with a cloumn A in rep1 and a dummy column in place of column A in rep 2.
    I want to restrict the records where A= 0 in the union report.
    How to go abouth this.
    Thanks in advance !!

    hi,
    In report1 let the column be as it is ,why are you changing the f(x) to case statement.Did you check is data there in that column of report1.
    In the union report make tat dummy column as 0 or 1 accordingly as per your requirement.So it would retrieve all the values of column of report1.
    Check the join conditions established and play with the joins like give a full outer join and check if the data is coming including 0's if so then you can pply filter on that column saying column not equal to 0,so the remaining values gets populated.
    Cheers,
    KK
    Edited by: Kranthi.K on May 18, 2011 2:03 AM

  • Adding new field with constant value for pre-existing records

    Hi,
    I have to introduce in different tables (ztable and standard one) a new field, containing the company code. The problem is that all the records already inserted in these tables should be filled with a particular company code ('DD01').
    I'd like to have this field automatically filled with a constant value without having to develop a program in order to update all the preexisting data. The reason is that cardinality of these tables is aroud 100 Millions of rec....
    Ideal solution should be to have some rule/routine defined in the data dictionary CR, so to get the field value during the import of the related CR.
    I've seen that is possible to define routine, but only for maintainance view (so new records..). If I open the db view, the situation is the following (example):
    Campi di ZKR_CRPU  
    Nm.campo Pos. Tp. dati Lngh. Decimali Not null Default
    MANDT 1 VARCHAR 3   X '000'
    ZZKDATANNO 2 VARCHAR 4   X '0000'
    ZZKDATMESE 3 VARCHAR 2   X '00'
    ZZKCODZONA 4 VARCHAR 3   X ' '
    ZZKDCODCTDIS 5 VARCHAR 6   X ' '
    ZZKCRPU 6 DECIMAL 10 9 X 0
    Is it possible to change the default value? is there a solution to my problem without developing a tool just for updating a field? I can also define a custom data element if the problem can be solved.
    Thanks a lot,
    Gabriele

    Hi!
    If I were you, I will not look for another solution, because it's pretty easy task for ABAP.
    It can be solved within 1 line:
    UPDATE ztable SET zzcompany = 'DD01' WHERE zzcompany = ''.
    Regards
    Tamá

  • Bdc while uploading Itab one extra record is coming with 000000 values

    Hi
    am getting one extra record with 00000 values for begda ,endda and object id  dont know why ?
    code is like,
    TYPES : BEGIN OF tt_record,
    plvar  type   hrp1000-plvar,
    otype  type   hrp1000-otype,
    seark  type   hrp1000-objid,
    begda  type   hrp1000-begda,
    endda  type   hrp1000-endda,
    short  type   hrp1000-short,
    stext  type   hrp1000-stext,
    END of tt_record.
    DATA:gt_record TYPE TABLE OF tt_record,
         gs_record TYPE tt_record.
    include bdcrecx1.
    start-of-selection.
    CLEAR : gt_record,gs_record.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        FILENAME                      = 'C:\ABC.TXT'
      FILETYPE                      = 'ASC'
       HAS_FIELD_SEPARATOR           = 'X'
      TABLES
        DATA_TAB                      = gt_record
    EXCEPTIONS
       FILE_OPEN_ERROR               = 1
       FILE_READ_ERROR               = 2
       NO_BATCH                      = 3
       GUI_REFUSE_FILETRANSFER       = 4
       INVALID_TYPE                  = 5
       NO_AUTHORITY                  = 6
       UNKNOWN_ERROR                 = 7
       BAD_DATA_FORMAT               = 8
       HEADER_NOT_ALLOWED            = 9
       SEPARATOR_NOT_ALLOWED         = 10
       HEADER_TOO_LONG               = 11
       UNKNOWN_DP_ERROR              = 12
       ACCESS_DENIED                 = 13
       DP_OUT_OF_MEMORY              = 14
       DISK_FULL                     = 15
       DP_TIMEOUT                    = 16
       OTHERS                        = 17
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Regards
    Meeta

    Hi  Txs for your response  i have created new file and my that problem solved but i want to know when i run in forground then only it works fine and update records but when i try in background it immd turn into incorrect log and when i run in Display error mode  i got these errors in error log,
    Runtime error RAISE_EXCEPTION has occurred
    Transaction error
    Processing statistics
    3 transactions read
    0 transactions processed
    3 transactions with errors
    0 transactions deleted
    Batch input processing ended
    Any idea any one can guide me on this,
    Regards
    Meeta

  • I record with a sony ax2000 and use the 1080 60i setting. what should i edit with when using adobe premiere ele 10

    I record with a sony ax2000 and use the 1080 60i setting. what settings should I edit with when using adobe premiere elements 10?

    smannino
    You have duplicate threads on this issue related to project preset suggestion for your 1080 60i video.
    I have responded to your question in the other thread
    if i record with a sony ax2000 using 1080 60 i what is the best editing setting to use with elements 10?
    Please reply in that other thread.
    Thank you.
    ATR

  • Records with a picklist field with empty values can't be seen from a report

    Records with a picklist field with empty values can't be seen from a report. I've created a report that have a picklist as a column. When there is no values the record(s) associated to this picklist don't appear. Do you know what are the common causes for this event?
    Regards
    Arturo

    Hi samrat chakraborty ,
    go to SUIM > roles > roles by complexselection criteria>
    under the selection according to authorization values give the object's  form SU53 screen and press enter it will asks the values for given object pass the values as per the SU53 and execute it will give the list of roles.... capture the roles. The user gets access if you give the any one of the listed roles is assigned, assign the role as per your approval process.
    Check with the below link for more assistence:
    http://help.sap.com/saphelp_erp2004/helpdata/EN/71/8fba30840c6e4d90da3526971cc684/frameset.htm
    Regards,
    S.Manu.

  • Do not show the # values should be replaced with blank at report

    Dear All,
    There is a requirement do not show the null (#) values at report level for characterstics fro example for onedocument there is no notification type in report for that document it is coming with null value but i do not want that null value in report it should be blank
    any suggestions  please,mostly provide the information at report level,but at cube level any options at the time loading( through start routine)
    Thanks & Regards
    sathish

    Hi Satish,
      There is one tcode where u can keep ur symbol defined say blank  to show in report when null values occur... i didnt rememeber tcode i will tell you as soon i get it....
    but it will effect not only this query but all the queries so it is upto u....
    and at cube level u can write a routine to check ...
    if  this field value is initial .
       change it with blank
    else
      leave it.
    hope it helps...
    regards
    vamsi
    Edited by: vamsi talluri on Mar 15, 2009 10:33 PM

  • When we execute   transcation selection-screen should come with some values

    hi gurus,
    My requirement is whenever user executes a particular transaction,
    selection screen should appear with some values by default.
    can you suggest me in solving this problem.
    its urgent.
    thanks,
    Bhanu.R

    Hi,
    for that do like:
    A transaction with a variant can have its own transaction code, which you can then use to execute the transaction with the appropriate variant.
    To create a variant transaction, proceed as follows:
    Choose Goto ® Create vari. trans. from the initial transaction variant maintenance screen.
    Enter a transaction name and corresponding short text. Transaction type Variant transaction is already set. The following screen already contains default values for the name of the calling transaction, the variant name, and the client-specific or cross-client variant checkbox.
    Save your entries.
    Example:
    Variant ABC has been defined for transaction Z000. We now want to create the variant transaction ZVAR.
    Name of the new transaction: ZVAR
    Name of the calling transaction: Z000
    Name of the variant: ABC
    Transaction ZVAR starts transaction Z000 with variant ABC.
    If the variant specified for a variant transaction does not exist (in the current client), then the calling transaction will be started without variant.
    Regards,
    Renjith Michael.

  • Records created through ess should be save with a lock indicator

    Hello seniors
    we have a situation where, the employee updates his adress, family records thought ess, these records should be saves in the locked mode
    how to achive this
    thanks in advance
    ved

    Try and address this using authorizations . Provide P_ORGIN, AUThorization Levels as E instead of W in the ESS roles.
    Please note that this may create an issue for HR Administrators who are also ESS users, but may work for all the normal ESS users.
    Hope this helps.

  • Creating Profile type report that hold fields with multiple values

    Really hoping someone can please help me out as I am very new to Crystal Reports.
    We use Maximizer CRM and we have been in need of some custom reports to rule out risk for regulators. I contacted Max and they suggested the only possible way is to create through Crystal. Its been almost one month already and I still cannot for the likes of me get this report operating properly. I have been inside and out on all sorts of forums, posted topics but no luck! So I will give it one more attempt in hopes that one of you geniuses can show me the way.
    In Maximizer CRM there is date, numeric, alphanumric and table. Our table fields items can be set to either single value or multi-value. So in crystal i did a default join of Client.tbl and the user-defined fields from view and joined the client id and contact number from all the view fields to client table. See Image:
    and I have dragged all the relevant fields in rows (in details section) rather then columns because we would be reporting on more then 1 record at a time. My problem is - If there is a table with multiple items selected (values), the records triple in count and it will show the same record over and over with just single field value changing at a time.
    The formula field you see in the image is from when I posted a discussion and Abhilash assisted me by providing the formulas I should add:
    1) Create a formula with this code and place this on the Details Section:
    whileprintingrecords;
    stringvar s := s + {field_with_multiple_values} + ", ";
    2) Next, move all the fields (except the formula field above) from the Details section to the Report Footer
    3) Create a formula with this code and place this on the Report Footer. This field would replace the existing field that contains multiple values:
    whileprintingrecords;
    stringvar s;
    Left(s, len(s)-2);
    This method is not working out for this type of report. When I add the formula Crystal is still counting my 2 records as 5 records but I can only view it as a single record and the multi-field has all the values for both records and displaying as a single record. See image:
    Can anyone please assist and advise where I am going wrong?
    -Jared

    Hi Jared,
    Thanks for taking down memory lane that is Maximizer.  Nice to see their table structure hasn't been simplified in the last 20 years.
    If I understand what's happening, you should only see 2 records and not 5.  That means your joins are creating duplicate records.  For now I'm going to skip over trying to optimize your query because I still have bad dreams of linking Maximizer tables.
    There are a couple of ways to work around the duplicates, one is to create a group and instead of having your formula in the Detail section, put it in the Group Header.  The question is what would you create your group on that would get you a unique record?
    If you know where the duplicates are coming from, create a Record Selection Formula that will remove the duplicates.
    There is also the menu option Database | Select Distinct Records.  I've never really had success with this one but there's no harm in giving it a shot.
    I would have you try and find which table or combination of tables is generating the duplicates but that requires playing with your links.  Normally I'd start by adding one table at a time and dropping one field onto the report.  If it doesn't repeat then add another table and field and repeat until you get your duplicates.  Once you know where they are coming from then you can either drop that table from your query or create a selection formula that removes the duplicates.
    Good luck,
    Brian

  • How to Highlight the CURRENT RECORD in a Table with Report Form

    Hi,
    I have created a Table with Report Form....let suppose the table is - EMP
    Report page - 1
    Form page - 2
    Now, when I do Create / Update on Page 2,....the control is back on Page1.
    Suppose in the Report Page (Page1)..we have 10 records....NOW how should I highlight the CURRENT RECORD in Page 1 with some color to identify the record which I have updated/created just now...
    Thanks,
    Deepak

    Hi Deepak,
    You could do that with a custom report template. I've done that here: [http://apex.oracle.com/pls/otn/f?p=267:175]
    Go to Shared Components, Templates and create a new Report template as a copy of your existing one. Then edit your template. In the above example, the Column Template 1 setting was:
    &lt;td #ALIGNMENT# headers="#COLUMN_HEADER#" class="t18data"&gt;#COLUMN_VALUE#&lt;/td&gt;I copied this into the Column Template 2 setting and updated the Column Template 1 setting to:
    &lt;td #ALIGNMENT# headers="#COLUMN_HEADER#" class="t18data" style="background-color:red; color:yellow;"&gt;#COLUMN_VALUE#&lt;/td&gt;I then set the Column Template 1 Condition to: Use Based on PL/SQL Expression
    and the Column Template 1 Expression to: '#EMPNO#' = '&P178_EMPNO.'
    (In my example, P178_EMPNO is the single item on the linked to page.
    Save those changes and go to your report and change its template to the new one. As long as a selection has been made and P178_EMPNO has a value, the condition will make sure that the report uses the first template for the row with the matching EMPNO value. All other rows get the template from Column Template 2.
    Andy

  • Updated record should come in txt file

    Hi Friends,
    My requirements like this way, any changes make in mara, mard, mbew, makt, vbak, vbap, vbrk and abrp table. that newly created data should come in .txt file of application server.
    I have already developed a program for that. it is downloading data in every 3 hours slots. it is running in background. whatever changes made during these hours it will download.
    now, my requirement has been changed, instance data should come in .txt file of app server. e.g. when newly created record save in database table, same time that record should come in .txt file with proper format.
    is it possible? please let me know.
    Thanks in advance,
    Parag

    Hi Parag,
    To obtain changes you know you can get the details from the tables CDHDR and CDPOS.
    Also you have questions about performance and so. SO here are some details.
    - When you flag a data element for change document (is checked) it is ONLY a marker that allows for registration of this field's changes into CDHDR and CDPOS. The actual control is done on datafile level in its technical settings (Transaction SE11 with datafile name and then push button "Technical Settings" or CtrlShiftF9). Herein you will find a flag "Log data changes".
    Within the CDHDR file and CDPOS file a field OBJECTCLAS is used. Only for existing OBJECTCLAS values the changes are logged.
    - Now obvious this is the trick for standard SAP (as Subramanian has already pointed out you can find "OBJECTCLAS" values with transaction SCDO). If you want to know on how to create your own "OBJECTCLAS" values with working logging on your own designed fields follow Subramanian suggestion and read the documentation.
    Now to your questions:
    You gave some tables you need to track changes (and now also for initial creation) like MARA, MARD, MAKT and others.
    To get changes for these tables use the following "OBJECTCLAS" values:
    - MATERIAL (Tables MARA, MARC, MARD, MBEW, MFHM, MLGN, MLGT, MPGD, MPOP and MVKE). By-the-way, this object will be replaced by MATERIAL_N  (available from release 4.6x).
    - VERKBELEG (Tables VBAK, VBAP, VBEP, VBKD, VBLB, VBPA, VBPA2 and VBUK).
    To collect changes (suggested by Andreas) you could use function module CHANGEDOCUMENT_READ. This is very usefull if also archiving is active for the objects you need to track changes for and your changes are scattered through time, but for your problem it is better to approach the log data directly.
    1. First select the main change documents from CDHDR table for a given "OBJECTCLAS" and "OBJECTID". Here you can use additional filtering on DATE (field UDATE) and TIME (field (UTIME). Even filtering on a specific transaction is possible (field TCODE).
    This gives you a number of change documents (field CHANGENR).
    2a. Secondly select the specific field changes from table CDPOS by using the found fields from CDHDR and additionally fill TABNAME with the specific table and if required FNAME with the specific field name. 2b. Since in your case the values will not be known, you need to track changes, you have to be very carefull in your selections. If you track the object MATERIAL or MATERIAL_N, you best loop over the MARA table and for each MATNR fill the OBJECTID field of CDHDR with this MATNR value.
    3. In order to find NEWLY created items you need to check the CHANGE_IND flag. When 'I' it is an new insert, when 'U' it is an update. Now this rule applies ONLY to key fields, since SAP first creates the key record (CHANGE_IND = 'I') and then the other fields (CHANGE_IND = 'U').
    Finally the warning given by Andreas (runtime increases - you MUST select with OBJECTCLAS and OBJECTID) is very important. Not supplying OBJECTID will have a very heavy impact on the runtime.
    Hope this gives you some clues on how to approach your problem.
    Regards,
    Rob.

Maybe you are looking for

  • My iTunes Video Library no longer streams to Apple TV

    Hello, I have searched all over and cannot seem to find a resolution to my problem so if this has been answered, I apologize. Problem is I can no longer stream any sort of video stored in my iTunes on my MacBook Pro to my Apple TV. It used to work be

  • Wireless keyboard will not enter discoverable mode

    Hi, Changed the batteries on my bluetooth apple keyboard and now the keyboard won't pair with the iMac; nor will it enter "discoverable" mode (when I press the keyboard power button the keyboard light illuminates green for about a second and then goe

  • How to start fresh and reinstall qmaster

    I had G5 with previous version of Qmaster and shake installed. I naively thought I could simply re-install Qmaster version 2.1 and then be able to add this G5 to my existing cluster. At first I got the error message Unable to start services because q

  • Yahoo! Mailboxes to Mac Mail

    For years I've been using Yahoo! Mail and just using the web interface. Why? So that if I was at a different computer I could still see all of my mail - including any in folders that I had set up in Yahoo! Mail. I did this despite hating the interfac

  • WHAT IS THE BEST WAY TO BACKUP MUSIC FILES?

    I want to be cautious and backup all of my music files. I currently just copy them to my external hard drive, but I was thinking of just archiving them all into one zip file. Does anyone know any other methods that work better?