Recording changes to text

Hi:
I am wondering if Captivate is able to record changes in
text. I am dealing with a Word document which we would like to show
being updated in real time, e.g. hilighting a sentence and then
typing in a new sentence. Is this possible in Captivate? And if so
what settings would I need to make this work?
Thanks!!

Hi quiet canadian and welcome to our community
Captivate should record that just fine. I would suggest
recording using Demonstration mode with the "Record Keystrokes"
opton enabled.
To configure these, click Options > Recording Options...
> Recording Options tab. Ensure the "Enable auto recording"
check box is selected. Then ensure the Recording Mode is
"Demonstration". From there, look down the dialog a bit and ensure
the "Record keystrokes" check box is selected. Once you do this,
click the "Full Motion Recording" tab. Ensure the "Automatically
use full motion capture for drag-and-drop operations" check box is
selected. (This should cause the highlight to be captured nicely).
Once you do all that, click OK to dismiss the dialog, fire up
Word and load your document, then record away!
Cheers... Rick

Similar Messages

How to change the text under RECORD WORKING TIME IN ESS.

Hi,
How to change the text under RECORD WORKING TIME in ESS.
Is there any setting at page or iview level?
Please help me.
Regards,
Thirun.

Hi,
If it is standard business package ,then check home page framework
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0e3a488-cdc2-2b10-209b-e01a0ed934b4
Regards
Koti Reddy

Mass change of text in purchase info record.

Hi All,
For purchasing info record, we have maintained copying rules to adopt text from material master. In copying rule for info record, we have maintained Fixed indicator for material master text "Purchase Order Text." The texts copied to info records from material master is having status fixed.
The problem is, since text is having fixed indicator it is not copying to PO unless we make change or adopt it. Now we do not know how many info record is having the text as fixed since in most PO's text is not getting copied.
Is there any way where we can make a mass change so that fixed indicator is removed. If LSMW, how can we know how many info records are having text as fixed indicator "*". Or is there is some other way.
Thanks

Hi Alex
You can change/ remove the "No material text' check box either by using a
mass maintenance - transaction MASS,
object type: BUS3003
table: EINE
give the Info record number/Pur org/info-category/ plant
or using the batch input recording using LSMW.
You can find the number entries of info-records having 'No Material text' using transaction SE16/SE16N with table EINE
and select the 'NO Material text' with 'X: and hit number of entries..you will find it
Thanks
Sasi

Using cue points to change a text box

Ok I asked a simlar question before but I am still having trouble getting it to work.
I have a video with 11 Cue points and at each cuepint I want the Typebox to change it text at each cue point.
When the video is playing I want a the textbox to change the text when cue point 1 is reached. This is the code I am using. But every always goes straight to the whatever the last functions text and skips all the other before it. Its bassically this code repeated with difffernt function name and string.
import fl.video.MetadataEvent;
flvplayer.addEventListener(MetadataEvent.CUE_POINT,section2Cue);
function section2Cue(event:MetadataEvent):void{
    for(var String = "section2" in event.info){
        typebox.text = "Hello";                        }
So basically I want to tell flash, when CuePoint1 is reached text = "hello world" and when CuePoint2 is reached I want the text ="Hello Again". I don't know what I am doing wrong or what is the best way to tell flash how to do this

Ok, I tryed that code Basically I want to call upon each cue point individually and have an event for each one. So how i tell it to display this only when Cuepoint1 is reach and display that only when Cuepoint2 is reached. What data would help ?
Most of my code is just buttons to reach each cuepoint within the video. I got that to work fine.
I'll supply it anyways
import flash.events.MouseEvent;
// Assign a new skin to my FLVPlayback instance using ActionScript
flvplayer.skin = "player.swf";
flvplayer.fullScreenTakeOver = false;
//select section menu button
selectBtn.addEventListener(MouseEvent.CLICK, openMenu);
          function openMenu(event:MouseEvent): void{
                    trace("working");
                    selectMenu.gotoAndPlay(2);
          selectMenu.closeX.addEventListener(MouseEvent.CLICK, closeMenu);
                    function closeMenu(event:MouseEvent): void{
                              trace("closing");
                              selectMenu.gotoAndPlay(11);
          //Cuepoint Buttons
selectMenu.sec1.addEventListener(MouseEvent.CLICK, section1Button);
function section1Button(event:MouseEvent):void
          // Replace video_instance_name with the instance name of the video component.
          // Replace "Cue Point 1" with the name of the cue point to seek to.
          var cuePointInstance:Object = flvplayer.findCuePoint("section1");
           flvplayer.seek(cuePointInstance.time);
           typebox.text = "Orion Health EMR Lite Overview";
selectMenu.sec2.addEventListener(MouseEvent.CLICK, section2Button);
function section2Button(event:MouseEvent):void
          // Replace video_instance_name with the instance name of the video component.
          // Replace "Cue Point 1" with the name of the cue point to seek to.
          var cuePointInstance:Object = flvplayer.findCuePoint("section2");
           flvplayer.seek(cuePointInstance.time);
           typebox.text = "Adopt Electrionic Patients Records Easily";
          selectMenu.sec3.addEventListener(MouseEvent.CLICK, section3Button);
function section3Button(event:MouseEvent):void
          // Replace video_instance_name with the instance name of the video component.
          // Replace "Cue Point 1" with the name of the cue point to seek to.
          var cuePointInstance:Object = flvplayer.findCuePoint("section3");
           flvplayer.seek(cuePointInstance.time);
           typebox.text = "Introducing Orion Health EMR Lite";
                    selectMenu.sec4.addEventListener(MouseEvent.CLICK, section4Button);
function section4Button(event:MouseEvent):void
          // Replace video_instance_name with the instance name of the video component.
          // Replace "Cue Point 1" with the name of the cue point to seek to.
          var cuePointInstance:Object = flvplayer.findCuePoint("section4");
           flvplayer.seek(cuePointInstance.time);
           typebox.text = "Meet Mr. Smith - Patient Registration and Intake";
selectMenu.sec5.addEventListener(MouseEvent.CLICK, section5Button);
function section5Button(event:MouseEvent):void
          // Replace video_instance_name with the instance name of the video component.
          // Replace "Cue Point 1" with the name of the cue point to seek to.
          var cuePointInstance:Object = flvplayer.findCuePoint("section5");
           flvplayer.seek(cuePointInstance.time);
           typebox.text = "Orion Health EMR Lite in the Exam Room - Clicnical Documentation and Orion Health HIE Integration";
selectMenu.sec6.addEventListener(MouseEvent.CLICK, section6Button);
function section6Button(event:MouseEvent):void
          // Replace video_instance_name with the instance name of the video component.
          // Replace "Cue Point 1" with the name of the cue point to seek to.
          var cuePointInstance:Object = flvplayer.findCuePoint("section6");
           flvplayer.seek(cuePointInstance.time);
           typebox.text = "Working with Orion Health EMR Lite - Documentation";
selectMenu.sec7.addEventListener(MouseEvent.CLICK, section7Button);
function section7Button(event:MouseEvent):void
          // Replace video_instance_name with the instance name of the video component.
          // Replace "Cue Point 1" with the name of the cue point to seek to.
          var cuePointInstance:Object = flvplayer.findCuePoint("section7");
           flvplayer.seek(cuePointInstance.time);
           typebox.text = "Order Entry in Orion Health EMR Lite";
selectMenu.sec8.addEventListener(MouseEvent.CLICK, section8Button);
function section8Button(event:MouseEvent):void
          // Replace video_instance_name with the instance name of the video component.
          // Replace "Cue Point 1" with the name of the cue point to seek to.
          var cuePointInstance:Object = flvplayer.findCuePoint("section8");
           flvplayer.seek(cuePointInstance.time);
           typebox.text = "ePrescribing";
selectMenu.sec9.addEventListener(MouseEvent.CLICK, section9Button);
function section9Button(event:MouseEvent):void
          // Replace video_instance_name with the instance name of the video component.
          // Replace "Cue Point 1" with the name of the cue point to seek to.
          var cuePointInstance:Object = flvplayer.findCuePoint("section9");
           flvplayer.seek(cuePointInstance.time);
           typebox.text = "ePrescribing";
selectMenu.sec10.addEventListener(MouseEvent.CLICK, section10Button);
function section10Button(event:MouseEvent):void
          // Replace video_instance_name with the instance name of the video component.
          // Replace "Cue Point 1" with the name of the cue point to seek to.
          var cuePointInstance:Object = flvplayer.findCuePoint("section10");
           flvplayer.seek(cuePointInstance.time);
           typebox.text = "Quality and Utilization Reporting";
selectMenu.sec11.addEventListener(MouseEvent.CLICK, section11Button);
function section11Button(event:MouseEvent):void
          // Replace video_instance_name with the instance name of the video component.
          // Replace "Cue Point 1" with the name of the cue point to seek to.
          var cuePointInstance:Object = flvplayer.findCuePoint("section11");
           flvplayer.seek(cuePointInstance.time);
           typebox.text = "Summary";
As for data? This is all I know about my CuePoints
Would the best way to acheive changing type is to change the way my movie clips are set up? Instead of telling it within the actionscript maybe telling it to go to next frame within a movieclip with the content? I don't know exactly how to word what I am trying to acheive but I'm trying!
thanks!

Trying to change the text of the command button.

Hi.,
Am using jdeveloper 11.1.1.6.,
I have dragged and dropped a command button in my jsff page.
When there is no record in my VO which dragged and dropped as a af:form the button will act as a create insert so that the text of the button should also be create Insert. If there is record the button should act as a update so that the text should also be update. I have used the follwoing code to change the text accordingly.
    public void settext(ActionEvent actionEvent) {
        // Add event code here...
        BindingContainer bc = getBindings();
        DCIteratorBinding dcIter =
            (DCIteratorBinding)bc.get("EssEeoDemInfView1Iterator");
        int e = (int)dcIter.getEstimatedRowCount();
        System.out.println (e);
        if ((e == 0)) {
            myButton.setText("CreateInsert");    // Null pointer exception occurs
        } else {
            myButton.setText("Update"); //null pointer exception occurs
    }Can any one pls help me?

Hi Timo!
This was the thing which i have did.
I have dragged and dropped a command button to my jsff page.
When i press the button a popup will show which ask the confirmation from the user.
This is the code which i have written in my managed bean.
    public String delete_action() {
        BindingContainer bindings = getBindings();
        OperationBinding operationBinding = bindings.getOperationBinding("Delete");
        Object result = operationBinding.execute();
        Commit();
        if (!operationBinding.getErrors().isEmpty()) {
            return null;
        return null;
    public void deleteItem(DialogEvent dialogEvent)
        if (dialogEvent.getOutcome() != DialogEvent.Outcome.yes)
            delete_action();
          return;
      }I have used the EL Expression in my another button which will change it property according to the values in my row.
#{bindings.EssEeoDemInfView1Iterator.estimatedRowCount gt 0 ? 'Update':'Create Insert'}For this button i have used the following code in my managed bean.
    public String update() {
         BindingContainer bc = getBindings();
        DCIteratorBinding dcIter =
            (DCIteratorBinding)bc.get("EssEeoDemInfView1Iterator");
        int e = (int)dcIter.getEstimatedRowCount();
        if ((e == 0)) {
              CreateInsert();
        } else {
               Commit();
        return null;
    }When i initially delete the record the button has not been changed to createinsert it remains as update. When i press the update am getting NULL pointer exception in CreateInsert() and Commit();

Item text in Purchase Order getting updated with info. record Purchase Order Text

Hello All,
I am working in a roll out project and facing issue in text repeating twice for the line item in the Purchase Order for the new company code for which rollout is happening
Issue:
Item text in Purchase Order getting updated with info. record Purchase Order Text
01) PO Text is maintained in the material master under "Purchase Order Text" tab
02) The PO text that is maintained in material master is getting updated in the Purchase Info. Record
03) When Purchase Order is created, the "Item Text" gets updated in the Purchase Order automatically only for the new company code for which rollout is happening. when printed, this results in the text getting duplicated twice
03.1) this behavior is not observed in the Plants/ Company code that is already Live
Configurations in the system:
The copying rules for the "Texts for Purchase Orders" is
Source Object = "Info Record", Source Text="Purchase Order Text", Fix="*"
We have modified the Purchase Order form to print one of the condition types maintained for calculating the tax. Other than this there is no change to the plants that are already live.
I could not locate any "Purchase Organization" / "Company Code" / "Plant specific configuration.
Am I missing any configuration or where can I look in what is causing this error.
Request help from the experts in the forum.
with Regards,
Dhandapani R

There is no company/purchasing/plant specific customizing for purchase order text.
The customizing copying rules for the "Texts for Purchase Orders" affects all equally .
If the text in the purchase order in ME23N is already filled different to other plants, then you either have a modification in place, or the texts are differently maintained in the referenced data (vendor, material, info record, contract)

Mass Change of TEXT field

Hi
I wanted to carry out Mass change of Text field in 2000 Financial documents, Can anyone give the best way to do the same?
Thanks

Hi,
Execute the FBL3N report by selecting the Documents using Dynamic selection mention
a) Document no's
b) Fiscal year
mention company code and execute the report and use mass change option to make changes.
The following accounts may not appear in the listing
a) Recon accounts in case these are not line item managed.
b) If any of the documents have been archived.
If you are on ECC6.0 or higher then you can use the report FAGLL03 report this would list the line items in the documents even if the Recon accounts are not line item managed.
You can also record a SECATT/LSMW to do this for you in case you want different text for each of the line item.
Regards
K.R

BDC to change header Text

hello friends,
need ur help.
I have made recording for changing header text
cForm name & cForm Ammout
but the fields are not recorded in recording.
is their any issue of sap script?
i get code from recording as follows.
perform open_group.
perform bdc_dynpro      using 'SAPMV60A' '0101'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBRK-VBELN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'VBRK-VBELN'
                              '3100000384'.
perform bdc_dynpro      using 'SAPMV60A' '0104'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBRK-FKART'.
perform bdc_field       using 'BDC_OKCODE'
                              '=KFTE'.
perform bdc_dynpro      using 'SAPMV60A' '6001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=%_GC 123 22'.
perform bdc_dynpro      using 'SAPMV60A' '6001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=%_GC 123 22'.
perform bdc_dynpro      using 'SAPMV60A' '6001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SICH'.
perform bdc_transaction using 'VF02'.
perform close_group.
please help me.
suggest answer.

To update text use the FM 'SAVE_TEXT'.

Change the Text for a Perspective in Balance Scorecard

I am trying to change "Short Text" and "Long Text" for an existing perspective in our Strategy Management system [SEM-BW 6.0 and BI 7.0]. I get the following error "Invalid call sequence for interfaces when recording changes". I have looked up OSS and found 533611 to be relevant, but it is for SEM-BW 3.1B and we are on 6.0. Does anyone else have this problem?
Detailed "Long Text" for the error:
Message no. TK425
Diagnosis
The function you selected uses interfaces to record changes made to your objects in requests and tasks.
Before you save the changes, a check needs to be carried out to establish whether the objects may be changed. This check must be performed before you begin to make changes.
System Response
The function terminates.
Procedure
The function you have used must correct the two Transport Organizer interfaces required. Contact your system administrator.

Hello Arun,
U could do the translation in Tcode Se63.
U follow the procedure
Translation >Shorttext>Screen Painter--> Screen Painter Text.
There u will see the all the text use for that transaction.
You can make the traslation there.
If useful reward.
Vasanth

Catching the Record Change Event

Hello,
We are currently using SAP 2004, and would like to catch an event when a sap record changes, for example in Item Master Data window when the user clicks on the << < > >> and the Item Number/ Information changes. From what I can tell there is no specific form event that can be caught like on item number text change
Any help with this problem would be greatly appreciated
Thanks

Hi Bill,
Unfortunately, there is not a "record change".
You'll have to catch all the menu event when the user click on the << < > >>
Private Sub SBO_Application_MenuEvent(pVal As SAPbouiCOM.IMenuEvent, BubbleEvent As Boolean)
      If pVal.BeforeAction = False Then
          Select Case pVal.MenuUID
            Case "1288" 'Next Record
                oRecordSet.MoveNext
                '// If reached EOF show last
                If oRecordSet.EOF = True Then
                    oRecordSet.MoveLast
                End If
            Case "1289" 'Previous record
            Case "1290" 'First record
            Case "1291" 'Last record
            End Select
        End If
End Sub

How to change the text in the legend of a graph programmatically in labview

I have many graphs in one plot and want to show the legend the name of the graph (i.e. the filename). How do I change the text in the legend programmatically?

Create a property node for your graph. Use the property node "Active Plot" to define which plot (or line) you want to rename. Then write the new legend label to the property node "Plot.Name". See attached.
Tim
Attachments:
legend.vi ‏12 KB

How do I change the text on a label for a SAP delivered WD view

Hi,
I need to change the text that is being displayed for a label in a SAP delivered WD ABAP View. When I look at the properties for this label, the Text property is currently empty, so I assume that the text that is being displayed in the view is coming from the dictionary. I was hoping to change the text of the label via the Enhancement Framework. I created an OTR entry, then went into SE80 for the WD Component, I navigated to the view in question, I pressed the Enhance button and entered $OTR:<package>/<alias name> in the text property for the label. Finally I saved and activated and was prompted to create an Enhancement Implementation, which I did and I selected it. Everything seems to be fine (no errors or warnings). I then ran the WD application. My change was not there. I then went back into SE80 for the WD Component that I created the enhancement. I navigated to the View and looked in the text property of the label and saw that my change was not there. I repeated this process several times and each time when I added the OTR entry to the text property of the label, it saves and activates without issue (in enhancement mode), but when I run the WD App the change does not show up and when I go back to the WD View, my change to the text property is gone. I know that if I really wanted to I could register the object and add the OTR entry to the text attribute of the label, but I am trying to perform this change using a modification free enhancement. Can this be done via an Enhancement, or do I have to register the object and make my change using a modification?

Hi Gregg,
excellent question. I had the same problem as well before.
What I have learned is that you cannot change a UI Element via Enhancements.
You can add new UI Elements (e.g. new label) or remove existing elements, but you cannot change them (except the layout properties (e.g. colspan) maybe).
The only possibilities I see is
1. Remove the existing label, and add a new label with your desired text
2. Do it as a modification
3. Do it as a configuration (This means you go to the webdynpro application in SE80, right click and select "Create/Change Configuration)
4. Do it as customizing (This means you add the URL parameter sap-config-mode=X to the URL, navigate to the label, right click on it, and select "Change Settings for Current Configuration").
The disadvatages of 3) and 4) are
- texts in configurations and customizing are not translatable (as far as I know)
- if you have multiple configurations, you have to change the label multiple times
Hope this helps a bit,
Daniel

How do I change the text color of footers on select pages? (InDesign CS6)

Good afternoon,
Months ago, I worked with a graphic designer to put together a 100-page workbook for my training company. He turned all of the files over to me and I'd like to make a small change before we print another run for a new client. Specifically, I'm having trouble changing the text color on select pages. Since a picture says 1,000 words, let me give you an example:
As you can see, the copyright information on the right side of the page is difficult to read here when placed over the photo (you may have to look closely, but it's along the guy's sleeve). What I'd love to do is change that part of the footer (not the left, page number side) to white text. This would make it quite a bit easier to read. There's a number of other pages in the book that I want to make this change to. I'm not sure why I never noticed it or mentioned it to the designer. I suppose I've become more discerning since then.
Let me tell you what I've tried to do:
I learned how to override master pages by CTRL+SHIFT clicking on the footer. However, this has not worked for me. It allows me to change the page number part, but not the copyright side. Additionally, sometimes when I override the master the formatting of the footer goes goofy. For instance, the left side and right side come together and end up in the middle of the page I'm working on.
I'm looking for a quick way to go through and make the footers easier to read on pages where they are backed by a photo. Hoping you can help me. Please let me know if you need any other information.
Best,
Taylor

I think you should have left it as it was. It seems like what you had was single pages flowing as spreads within InDesign. Like below. That is the correct way, and when you changed it to all single, it did create your footer problems.
Will you be sending the file as a PDF to your online printer? If so, then leaving the InDesign file set as below is fine. The PDF output will separate the pages.
All you have to do is make sure that Pages, not Spreads, is chosen when you output the PDF

Unable to change group text name or add person to some group texts in iOS 8

I really like the ability to change group text names as it helps me separate work group texts from personal especially when I have coworkers that have separate business phones. I'm unable to change the name of some group texts as the option is not there when I go into details. I'm also unable to add contact to the same group texts that I'm unable to change the name on. Is this a glitch or am I missing something?

Hi CaliWingsFan,
If you are having issues with renaming and adding users to group texts, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
Next, I would try restarting the iPhone -
Turn your iOS device off and on (restart) and reset
If the issue is still present, you may want to restore the iPhone as a new device -
iOS: How to back up your data and set up your device as a new device
Thanks for using Apple Support Communities.
Best,
Brett L

Change my text tone for a palm treo pro

Is there a way to change the texting rington on the Palm Treo Pro to something other than the few items they allow you to choose from.
I want to set Alarm4 as my text alert and it only gives me a few. Alarm4 is allowed in a few other notification options, but not on the text message one. Can I move a default alarm for one time to another item?
Post relates to: Treo Pro T850 (Sprint)

gijenjen wrote:
Is there a way to change the texting rington on the Palm Treo Pro to something other than the few items they allow you to choose from.
I want to set Alarm4 as my text alert and it only gives me a few. Alarm4 is allowed in a few other notification options, but not on the text message one. Can I move a default alarm for one time to another item?
I have the 800w, but it's the same version of Windows Mobile, so I think the following might apply to your phone, too.
Alarm4 is a .wma-format file, while the old-style alerts are MIDI format file. I don't know why, but some of the notification drop-downs list both, and some list just MIDI files. But they all list some ring tones that I downloaded from Microsoft. Hmmm...
In File Explorer, my downloaded ring tones are in My Device\Application Data\Sounds. So if you were able to copy Alarm4 into that folder, you might be able to assign it to any notification.
I can't see any way to copy files in File Explorer. You might need to do it through ActiveSync or a third party file manager.
If you experiment with this, let us know how it goes.

Recording changes to text

Similar Messages

Maybe you are looking for