Recovery disk help needed
I recently replaced the disc drive on my Toshiba Satellite A105-S4284 laptop. I attempted to use the recovery discs that came with the laptop but only one disc ran & formatted the drive. Why didn't it ask for me to insert the 2nd disc? After reinstalling Windows XP, I find I cannot connect to the internet or even locate my wireless wifi.. Also, how many MB's should I set aside when formatting the drive for partitioning?
Satellite A105-S4284
Downloads are here
After reinstalling Windows XP, I find I cannot connect to the internet....
Start over with a clean install of Windows, because the order of installation matters.
Install the Intel chipset software followed by its display driver prior to any other driver. (Ignore all that nVidia and ATI stuff.) Install the Common Modules before any other Toshiba utility
I would create a single partition encompassing the entire drive.
-Jerry
Similar Messages
-
hi all i have just purchased a s12 ideapad and im having some trouble with recovery disks.
i cannot make disks from the one key recovery as it does not allow and everytime i try to use the one key resue system on the keyboard it just boots into windows.
i really want to restore this ideapad to factory settings so how can i do this, both options do not work.
cannot find the specified file!!
can i get these disks from lenovo?
or can someone help me with my problem?
thanksthis can be closed the s12 went back to base and im waiting for them to send back with origonal boot image
-
Hey guys ı really need your help. I bought macbook pro retina 15 inch 2 weeks ago and it came with installed mavericks of course but ı want to create a recovery disk and to do that ı need to download mavericks installer from app store but when i click to download mavericks from appstore purchased part ı get a message says " Your purchasing process couldnt complete. OS X Mavericks cant be installed to this computer." How can ı solve this problem!??
One way around tis is to borrow a Mac that can run Mavericks and then the download will work. You can use these instructions:
http://www.macworld.com/article/1167857/how_to_make_a_bootable_mountain_lion_ins tall_drive.html
Though they are for Mt. Lion, the same steps will work.
Ciao. -
Hi Everyone!
I'm having some trouble with my new T510 and was wondering if anyone could help me out. Firstly I'm not good at using computers, I'm a complete newbie. So I'm sorry for the vague descriptions.
Anyway, I was told by my friend to create the Lenovo Factory Recovery Disks and since I didn't know anything about laptops, I just did what she said and followed the instructions. I inserted a DVD and it popped out asking for another disk, so I ended up following what the laptop was telling me until the 5th disk. When I inserted the 5th, the DVD drive wouldn't response, I doubled click and nothing would turn it in. I clicked on Thinkvantage as it was telling me a driver was disabled. I didn't know what to do, so I restarted the laptop and the DVD drive turned back on, but by then I had cancelled the creating the lenovo factory recovery disk. My laptop then had a new driver called SYSTEM_DRV (S as well as the Lenovo Recovery (Q, but the (Q drive folder is empty. But when I restarted the laptop again, the (S disappeared but the (Q drive is still there but empty.
So I don't know what I should do now, should I try to make a new set of recovery disk. I've heard other people say that you can only create the recovery disks once, but mine was interrupted, and I didn't finished completing the set. Would I still be able to recover my laptop to factory mode even without the disk.
Thanks in advance for helping,
Jo
BTW, my laptop is Windows7 64 bit.You don't need a set of recovery disks as long as the recovery partition is not altered. Unfortunately, that can happen beyond user consent (e.g. system errors, viruses ...), so this is why making a set of recovery disks is highly recommended.
"Factory Recovery Disks" tool lets you know if a set of disks was previously (successfully) made by showing an appropriate message. If you don't get that message, you must try and create the set of disks again.
If you use DVD's, I think it should take 2 or 3 discs for the whole set: 1 for the boot disc (aka Rescue Media) and 1 or 2 for the factory recovery discs.
The recovery partition may show as empty in Win Explorer, but you should see that it's actual size is approx. 9GB.
Be sure to read the following guide for more details:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-74040
EDIT: You can also check this one:
http://www-307.ibm.com/pc/support/site.wss/MIGR-68317.html -
I insert the recovery disk in the drive and start up the laptop. Go to the recovery menu and try to format my hard drive. I get this error that said that this disk is not recognized by my laptop. Its the disk that came with the laptop. Any help would be appreciated.
Satellite A215-S4747
I get this error that said that this disk is not recognized by my laptop.
You need a utility to reset the DMI string.
Call Toshiba's tech support at 800-457-7777 for that.
-Jerry -
L755D Recovery Disk 2 NEEDED!!!
I created all five recovery disks for this but somehow disk 2 is bad. Recovery partition no longer exsists. I only need Disk 2. All others tested fine. Help anyone?
Please see this post for information on ordering recovery media.
- Peter -
Thinkpad R52 Recovery Disks -- HELP!
I recently bought a set of Thinkpad R52 Recovery Disks from "ThinkpadRestore.com," and they sent me an incomplete set!
I have all the disks except "Product Recovery CD #2." They won't answer my emails or their phone or the voice messages I've left them. So I'm dead in the water here. I'm going to have to dispute the purchase through Paypal.
I have tons of work to do, and I can't find any way to get this one CD.
Can anyone help me on this? I've looked on the web and don't see any other alternative suppliers. Could someone possibly help me? Does anyone have this one CD? Dropbox? Something?
Thanks for any help you can suggest.
Solved!
Go to Solution.Hello and welcome,
There's a fairly recent conversation about that vendor over here: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/Is-this-a-legitimate-company/td-p/880009
Doesn't look too good
I don't know if Lenovo support still has R52 media available. Give them a call: 1-800-426-7378, 24 hr / 7 days
That's where I'd go first for legit recovery media in the US.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Recovery Disk Instructions Needed For Mini - Lion Failed
I do not have a TM backup, but I see the "Recovery Disk" and my ML install simply restarts and panics. I need to rollback ASAP. This is business. Please provide instructions to recover from Recovery Disk.
Thanks.boot up, hold cmd R, while the chime is sounding and then you should boot into the recovery partition.
Verify and repair disks and permissions and Reinstall ML.
There is no way for you to go back since you didn't make a backup of your computer before updating.
ML is better then L anyway
A reinstall might fix your issue. -
Disk Utility - Can't repair Disk - Help needed :(
Hi,
I have some trouble to use Disk Utility (on my iBook G4 - 1.33 Ghz+1 GB RAM)
I run Disk Utility to verify and repair permissions, which worked, and then Verify Disk. HEre is the logged result:
++++++++++++++++++++++++++++++++++++++++++++++++++++
Aug 26 09:32:58: Disk Utility started.
Verify permissions for “E=G4”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “E=G4”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Volume Bit Map needs minor repair
Checking volume information.
Invalid volume free block count
Invalid volume free block count
uld be %@ instead of %@)",2)
4078185
4078184
Volume Header needs minor repair
The volume E=G4 needs to be repaired.
Error: The underlying task reported failure on exit
Disk Utility stopped verifying “E=G4” because the following error was encountered:
The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
+++++++++++++++++++++++++++++++++++++++++++++++++++++
I wanted to run Disk Repair, but the button would not highlight, therefore could not be started.
I retried today, and now the Verify Disk task won't even work, blocking Disk Utility (needs force quit)
(E=G4 is the name of my Hard Drive on the iBook)
I also tried TechTool Deluxe coming with Applecare protection plan, but TTD can not check the "Volume Structure".
Has anyone got any tips or sequence to solve this?
Thanks in advance
Yann
Message was edited by: ObiYannI just ran the Disk Utility, and cannot very disk. It gives me an error message;
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
and when I run the repair, this is the message:
The volume GERRARD could not be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error
Repair attempted on 1 volume
1 volume could not be repaired
Prior to running Disk Utility, I have already tried DiskWarrior, and could not repair my disk. Anyway I can fix this problem??? Formatting the disk would be my last option (though I am unsure if it will fix the problem). Any advise would be greatly appreciated. Meanwhile, I will continue to back up my file, and delete unused data and try to run it again.
Thank you all very much for any input.
Cheers,
Matt -
Hi everybody my name is mick i am married to Olwyn i have two Kids Aaron and Brittany i work for the NHS as a care worker i am new to the world of forums but i need some help please i have an iphone 3g that does not do much so i have been given a iphone 3g by my daughter to use until i can upgrade it had a faulty ariel and a cracked back so i had that repaired only to find that the phone was in recovery mode i have tried to link it to itunes but it said i need to get it out of recovery i have tried to hold the power button and the home button but this did not work can somebody please help i would be very greatful
thanks
Mick the yidHave you updated Itunes to the latest version?
When you connect the USB cord to your computer does Itunes see the iphone?
(if it does what does it say exactly)
If its in recovery mode you will need to restore & update it.
Which there should be a button in itunes under (devices on the left side that should say Iphone)
When you click on that it should take you to a screen that has a restore button.
Click on the button and follow the on screen guide to update it. -
'Repair Disk' Help needed..
Hi,
Repairing Disk Permissions on my HD1 and it doesn't like it. Does anyone know what I should do?
It says...
+Verifying volume “HD ONE”+
+Performing live verification.+
+Checking Journaled HFS Plus volume.+
+Checking Extents Overflow file.+
+Checking Catalog file.+
+Invalid sibling link+
+The volume HD ONE needs to be repaired.+
+Error: Filesystem verify or repair failed.+
These are the permissions....
+Permissions differ on "System/Library/CoreServices/AirPort Base Station Agent.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .+
+Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .+
+Permissions differ on "System/Library/Frameworks/AppKit.framework/Versions/C/_CodeSignature/CodeResou rces", should be ?--------- , they are ---------- .+
+Permissions differ on "System/Library/PrivateFrameworks/DotMacSyncManager.framework/Versions/A/_CodeS ignature/CodeResources", should be ?--------- , they are ---------- .+
+Permissions differ on "System/Library/PrivateFrameworks/DotMacSyncManager.framework/Versions/A/Resour ces/DotMacSyncHelper.app/Contents/_CodeSignature/CodeResources", should be ?--------- , they are ---------- .+
+Permissions differ on "System/Library/PrivateFrameworks/DotMacSyncManager.framework/Versions/A/Resour ces/dotmacsyncui.app/Contents/_CodeSignature/CodeResources", should be ?--------- , they are ---------- .+
+Permissions differ on "System/Library/PrivateFrameworks/DotMacLegacy.framework/Versions/A/_CodeSignat ure/CodeResources", should be ?--------- , they are ---------- .+
+Permissions differ on "System/Library/Extensions/IOUSBMassStorageClass.kext/Contents/_CodeSignature/C odeDirectory", should be ?--------- , they are ---------- .+
+Permissions differ on "System/Library/Extensions/IOUSBMassStorageClass.kext/Contents/_CodeSignature/C odeResources", should be ?--------- , they are ---------- .+
+Permissions differ on "System/Library/Extensions/IOUSBMassStorageClass.kext/Contents/_CodeSignature/C odeSignature", should be ?--------- , they are ---------- .+
+Permissions differ on "System/Library/CoreServices/CCacheServer.app/Contents/_CodeSignature/CodeResou rces", should be ?--------- , they are ---------- .+
+Permissions differ on "System/Library/CoreServices/Kerberos.app/Contents/_CodeSignature/CodeResources ", should be ?--------- , they are ---------- .+
+Permissions differ on "System/Library/CoreServices/KerberosAgent.app/Contents/_CodeSignature/CodeReso urces", should be ?--------- , they are ---------- .+
+Permissions differ on "System/Library/Frameworks/Kerberos.framework/Versions/A/_CodeSignature/CodeRes ources", should be ?--------- , they are ---------- .+
+Permissions differ on "System/Library/KerberosPlugins/KerberosDatabasePlugins/db2.bundle/Contents/_Co deSignature/CodeResources", should be ?--------- , they are ---------- .+
+Permissions differ on "System/Library/KerberosPlugins/KerberosDatabasePlugins/kldap.bundle/Contents/_ CodeSignature/CodeResources", should be ?--------- , they are ---------- .+
+Permissions differ on "System/Library/SystemProfiler/SPDisplaysReporter.spreporter/Contents/_CodeSign ature/CodeResources", should be ?--------- , they are ---------- .+
+ACL found but not expected on "Applications/Utilities".+
+ACL found but not expected on "Library".+
+Permissions verification complete+Repairing permissions is generally irrelevant (certainly the oft-given advice to repair before installing something, as authorizing an installer with your password allows it to override whatever previous settings there may have been, anyway), and the "error" messages usually meaningless.
It CAN make a difference, so there's some merit to running it when you have problems, but those cases are extremely rare.
The invalid sibling link, however, is a serious problem. It means there is a structural problem with your hard disk's contents. You must start up the computer from the install DVD and select Disk Utility from the "Utilities" menu as soon as that shows up, and repair the disk. Once it says "successfully repaired", run it again until it says "appears to be OK". -
FCPX crashs with 2nd disk, help needed
Hi Everyone,
My FCPX keep crashing on launching.
FCPX 10.0.2
Lion 10.7.2
MBP 15' with two disks, SSD for system and HD for media (replaced the dvd).
I know there might be thousands reason to lead the crashs, but here's the excatlly repo on my MBP.
1. Unmount HD, run FCPX, everyting goes well.
2. Mount HD, run FCPX, crashs everytime before I can see the UI.
3. Unmount HD, run FCPS, mount HD, FCPX crashs in 2~3 sconds.
Workaround applied.
fresh install FCPX, even trial version
delete event and performances
repeir and verify disk premessions
I'd like to appreciate all the guys that read my thread and specially who could share some lights on this issue.
attached crash log:
Crashed Thread: 17 MIO Mounting Thread
Thread 17 Crashed:: MIO Mounting Thread
0 com.apple.MPEG2RADPlug 0x0000000122b5860d IsValidMPGDir + 8613
1 com.apple.MPEG2RADPlug 0x0000000122b594c8 IsValidMPGDir + 12384
2 com.apple.MPEG2RADPlug 0x0000000122b55d14 0x122b54000 + 7444
3 com.apple.MPEG2RADPlug 0x0000000122b56239 0x122b54000 + 8761
4 com.apple.MPEG2RADPlug 0x0000000122b55fb0 0x122b54000 + 8112
5 com.apple.MPEG2RADPlug 0x0000000122b55fe6 0x122b54000 + 8166
6 com.apple.MPEG2RADPlug 0x0000000122b55fe6 0x122b54000 + 8166
7 com.apple.MPEG2RADPlug 0x0000000122b55fe6 0x122b54000 + 8166
8 com.apple.MPEG2RADPlug 0x0000000122b55fe6 0x122b54000 + 8166
9 com.apple.MPEG2RADPlug 0x0000000122b55d9f 0x122b54000 + 7583
10 com.apple.proapps.MIO 0x000000010161db42 -[PluginLockPair volumeWithPath:error:] + 530
11 com.apple.proapps.MIO 0x000000010161df54 -[PluginLockPair createVolumeForPath:error:] + 52
12 com.apple.proapps.MIO 0x000000010161e3df -[PluginLockPair mountPath:] + 639
13 com.apple.proapps.MIO 0x000000010161ec7c -[PluginLockPair scanPaths] + 332
14 com.apple.Foundation 0x00007fff8d8a27fe -[NSThread main] + 68
15 com.apple.Foundation 0x00007fff8d8a2776 __NSThread__main__ + 1575
16 libsystem_c.dylib 0x00007fff8985b8bf _pthread_start + 335
17 libsystem_c.dylib 0x00007fff8985eb75 thread_start + 13
Thread 17 crashed with X86 Thread State (64-bit):
rax: 0x0000000000000001 rbx: 0x0000000124a2d8cc rcx: 0x0000000000000000 rdx: 0x0000000000000000
rdi: 0x00000000ffffffff rsi: 0x0000000000000000 rbp: 0x00000001231edc90 rsp: 0x00000001231edb10
r8: 0x0000000000000000 r9: 0x0000000000000064 r10: 0x0000000000000001 r11: 0x0000000000000000
r12: 0x0000000124a2d8b8 r13: 0x0000000124a2d870 r14: 0x0000000124a2d870 r15: 0x0000000000000001
rip: 0x0000000122b5860d rfl: 0x0000000000010246 cr2: 0x0000000114b6d000
Logical CPU: 1it connected... in side, originally
I just removed the DVD and put a SSD into that room as my system drivers. The HD is untouched.
As you seen in screenshot (show hidden file), if I deleted the .fcpuser and .fcplock, it'll autmatically create every time I run FCPX, even i mount this driver after FCPX launchs.
All the video file is store in lightroomlibrary. and tones photos are in photos folder.
Is it possible that FCPX will scan the file on my disks and happneds that one of video files is broken?
I'm removing all the files to my mobiledrive, it'll take some minuts to see the result. -
Adobe Photoshop Elements 10 installation disk help needed
I bought Elements 10 from the Apple store awhile ago, but have just got around to installing it for the first time. CD 1 won't autoplay and I'm not sure what to do from here. Somewhere it was suggested to try downloading the trial version and entering the serial #, when prompted to purchase, but I can;t get the trial version to work. Any help would be appreciated. Thanks
In what way is the trial version not working for you? Also if you have only purchased Photoshop Elements 10 then Disc three should be labeled stating it is for Mac OS. You can find more details at Install Premiere Elements, Photoshop Elements - http://helpx.adobe.com/photoshop-elements/kb/install-premiere-elements-photoshop-elements. html.
-
MacBook start up disk help needed
What is the start up disk on a MacBook and how do I make space on it?
The startup disk is usually your HDD.
Freeing Up Space on The Hard Drive
1. See Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits. -
Recovery failed : help needed
Hi experts,
Can anybody say why this is happening, already done restore of controlfile and datafile until this time, but recovery is failing.
RMAN> run
2> {
3> allocate channel ch1 type 'SBT_TAPE';
4> recover database until time "to_date('05/25/07','MM/DD/YY')";
5> }
allocated channel: ch1
channel ch1: sid=13 devtype=SBT_TAPE
channel ch1: VERITAS NetBackup for Oracle - Release 5.1 (2004043016)
Starting recover at 13-JUN-07
released channel: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 06/13/2007 11:00:39
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20011: target database incarnation is not current in recovery catalog
Thanks
ShaanThis database incarnation has not been registered at the repository catalog. Issue the register command.
Be aware if this happen to be a cloned database, database id should have been reseted with the newdbid tool, othewise rman will consider it is an unregistered cloned copy of a current database.
~ Madrid
Maybe you are looking for
-
ASA 5510 VPN profiles question
Hi! I wonder if it is possible to let users connect to our firewall with anyconnect ( vpn.customer.se ) and get three profiles from the droplist to chose from. One for economy,development and public. The three departments are located at different i
-
GR not replicated in ERP, Stock updated in EWM
Hello experts, We can not able to move the Stock information from EWM to ERP as we have completed the Goods receipt in EWM (IDR activation, IDO and Warehouse Task and confirmation) We have verified the staus of IDOC in EWM ( T code SLG1) , it says th
-
Installing 2 hard drives Problems
I have a k7n2 Delta ILSR and I just finished building it and setting up the bios and everything seems to be running pretty good. Currently, I have one hard drive (seagate) installed and I want to install a second hard drive (western digital caviar)
-
So how can I sync and not lose my contacts/calendar, I am confused.
-
JSF 2.0: Facelets: No tag libraries (TLDs)?
Hi, I'm currently concerned with JSF 2.0 and Facelets. I found: - Tags are no longer defined in taglibs (TLDs) (instead they appear to be hard-coded in Java code) - On the other hand, jsf-impl.jar does ship two taglibs (for HTML and JSF Core), howeve