GR not replicated in ERP, Stock updated in EWM

Hello experts,
We can not able to move the Stock information from EWM to ERP as we have completed the Goods receipt in EWM (IDR activation, IDO and Warehouse Task and confirmation)
We have verified the staus of IDOC in EWM ( T code SLG1) , it says the error message as per the below
An RFC destination could not be specified for the logical system E6SCLNT900
Message no. B1550
Diagnosis
An RFC destination should be specified for the logical system E6SCLNT900. This could not be done in this case. E6SCLNT900 is not your local logical system and this system is not included in the relevant Customizing tables.
Procedure
Check:
RFC destination
Port definitions
oubound partner profile of message type SYNCH for this logical system
We have done the settings for 1) RFC destination,2) Port definitions, 3) oubound partner profile of message type SYNCH for this logical system
Even though the above settings were done, we are getting the error message. Please let us know the cause and remedy if any..
Thanks
Jonnakuti Raju

Hi Kalyan
Thank you for your reply. I have checked as you mentioned . Remote/connection Test is perfectly working for both the systems
Please let us know , if any other settings missed.or let us know the setup steps sequence and details I will check it again
Thanks and Regards
Jonnakuti Raju
Edited by: Jonnakuti Raju on May 6, 2011 2:08 PM

Similar Messages

Open stock updation not performed with MB1C

Dear Frieds,
While performing open stock updation with MB1C T-Code, an error message will appeared as " Material xxxx does not exist in warehouse xxxx". Kindly give the solution.
Regards,
Gopi

Hi,
Go to MM01, select warehouse - 1 & 2 views, specify the warehouse nos & extend the warehouse views for this material. Once the above is done, you can proceed to use MB1C.
Regards,
Vivek

Last stock update Date Tab not updating in ICH

Hi Team
I observed that in ICH screen Last stock update Tab is not going to update every time while demand and stock information coming from ECC to ICH.
There is no stock inconsistency. All stock tab information are updating correctly in ICH compare to ECC system.
Only this Last stock update tab Date are not updating.
What is the reason behind this?
Could you please help me to resolve this?
Regards
Virendra Kumar
09769396038

Hi Virendra
It is a bug, please report to SAP and get fix
which version you are using and what is the patch level?
1341691 should be helpful check out
Best Regards
Vinod

When replicating customer from ERP, the address is not replicated to CRM.

Hello.
I'm facing the problem which the address data of customers is not replicated to CRM.
I've checked the business object BUPA_MAIN on t-cd SMW01, so I found that the task of addresses is "S" and it doesn't get GUID.
I'm not sure, but I doubt the error is caused by creating a new client in CRM.
In other words, I doubt that the setting of replicating the address data of customer is not active.
Does anyone have the knowledge of this problem?
BestRegards.
Miki

Hi Hedy,
Please go through this following note
Note 1511835 - Incomplete addr sent to CRM causing failed duplicate check
Hope it answers your Query
All the Best
Regards,
Srikanth.Naga

POS DM: Stock updates in SAP Retail

Hi!
We are implementing SAP Retail (ERP 6.0 EHP4 stack 3), SAP PI (Netweaver PI 7.1 SP 8) and SAP BW (NetWeaver 7.0 ehp1 stack 4, incl BI content 704, SP 3 ) for a client. Their POS system is a 3rd party system, i.e. not SAP POS, and it does not contain any stock information.
This issue concerns stock updates in SAP Retail using POS DM:
On the busiest day of year, my client has 347 000 POS transactions in total from all stores, and in one year they have 30 mill POS transactions. My client requires that SAP will provide them with near-realtime information on stock availability, as this is an important way of providing good customer service. The stock information should be available in SAP Enterprise Portal and SAP Retail Store, as well as standard SAP gui transaction. In addition, the webshop (external system) should have as accurate information about stock as possible, at least it should be updated once every 30 minutes.
My client also has a requirement to be able to create purchase orders during office hours (store opening hours), based on MRP runs. This means they must have as accurate stock levels as possible for running MRP. Stock levels are also used in ATP checks, when deciding whether to pick customer orders from store inventory/stock or to create purchase requisitions.
All these requirements have led us to believe that the best way to solve this, is alternative A:
- to update stock continuously during office hours, using WPUBON to create material documents, one for each POS transaction. Sales and tenders will be updated in SAP Retail using WPUUMS and WPUTAB.
Some challenges this will create:
a)     It will create 347 000 WPUBONs on the busiest day of year, all within 10-12 open hours.
b)     If we have same amount of material docs and FI docs, they will use 30% of the available 8 digits within their number ranges per year.
c)     The idocs will fail if there are article locks simultaneously. (However, this can be handled by updating products only at night time (using batch jobs) and using batch job to handle failed idocs)
Edited by: Øystein Emhjellen on Jan 4, 2010 2:15 PM

Alternative B:
- we have considered to use WPUUMS and WPUTAB, updating stock levels only once a day. The solution we then must use for taking into account actual sales data is described in SAP Note 1088886 - Using the interface for online stock queries. If we choose this, we need to check during the day for each article any sales, to reduce stock in reporting/screens, ATP checks and in MRP runs. We must also create a program to check for articles sold before sending stock data to webshop (external system). (As we do not know which articles have been sold, we must create our own version of RFC - /POSDW/SALES_QUERY_RFC, to enable that the article number does not have to be specified. Rather, the article numbers (and sold quantities) have to be returned to ERP based on what was actually sold.)
We consider this alternative more risky, due to the need for changing behaviour of standard programs for MRP and ATP check. It will also create a number of RFC calls between SAP ECC and SAP BW.
My questions on this issue are:
i)     Will alternative A be preferrable, if hardware requirements are handled?
ii)     Do you see any additional challenges related to alternative A?
iii)     Will alternative B be adviceable, concerning the program changes/enhancements involved?
iv)     Are there standard implementations of SAP ECC, that includes the use of RFC - /POSDW/SALES_QUERY_RFC. I.e. standard programs in SAP ECC that uses the information from this RFC call?
Thanks for any advice !
Best regards,
Oeystein Emhjellen

PRD is not triggering in Negative Stocks allowed scenario

I am trying to do Subcontracting process with Negative Stocks allowed for the final material and raw materials even & all of them are checked for negative stocks allowed. When I am trying to issue, say 10 units of materials to SC Vendor with ZERO stocks in storage, the stock's updating accordingly as 10-, but while doing MIGO for say 5 units, the stock's updating accordingly, but in FI documents so created, the PRD key is missing. I read bout PRD and it states : Price differences can also arise in the case of materials with moving average price if there is not enough stock to cover the invoiced quantity. In the case of goods movements in the negative range, the moving average price is not changed. Instead, any price differences arising are posted to a price difference account. Depending on the settings for the posting rules for transaction/event key PRD, it is possible to work with or without account modification. If you use account modification, the following modifications are available in the standard system. So, what steps are to be taken in order to trigger PRD key in the FI Documents.
Regards,
Sowmyesh Maniyar

Sowmyesh Maniyar wrote:
I read bout PRD and it states : Price differences can also arise in the case of materials with moving average price if there is not enough stock to cover the invoiced quantity.
Yes its correct.. At the time MIRO, if any price difference occurs, then first system checks stock is available or not.. If stock is there then system will take the amount from stock account, if not, then system take the amount in PRD account...
But here you have activated negative stock. I think because of this your stock account triggered instead of PRD account..
Can you check and analysis the accounting entry, where the price different amount goes ?

CRM 7.0 Contact person in order not replicated to R/3

Hello all,
I am currently facing issue with contact persons in CRM orders. There are several partners in the CRM order. Standard ones like ship-to party is replicated to R/3; employee roles are also replicated into R/3 within an order; contact persons (no matter if standard or Z) are not replicated from CRM order to R/3. There is neither no error message in BDOC nor in order.
Partners are set correctly for mapping between R/3 and CRM (including Z partners) -
tables CRMPARNR (R/3) and table CRMM_BUT_CONTNO (CRM) checked; GUIDs are there
Users do change these contact persons manually sometimes.
If order changed in ERP - including contact persons adding/changing - all partner roles are transfered to CRM for an order correctly.
Any ideas??
Thanks for your help
Radim

Hello,
there is an important GUID that need to be determine, the contact persons in my case need to selected via partner determination otherwise the partner gets deleted in R/3. The determination is creating the relation to the partner which is transfered to R/3 and can be checked in the BDoc. This has solved the issue

BP created with category Person and BP Role Consumer is not replicated

Hello Gurus,
I have created a BP with Category Person and BP Role Consumer but after saving my BP is not getting
replicated to ERP, though in the Clasification Tab i could see consumer is being selected and the Account
group 0170 - Consumer showing up.
I have also checked in PIDE transaction in ERP system this Account group has clasification E which is Consumer.person,and as numbe range is assigned to this Account group
i have checked in middleware there is an error message which says "BP XXXX doesnt not exist as customer,change not possible" and aslo one more message which says "no classification is assigned to BP"
any customizing is missing in CRM system, or only customiaing required is in ERP only?
Thanks and Regards
chandu

Hi,
With respect to your question on below link.
Re: BP created with category Person and BP Role Consumer is not replicated
Please find the below path in ECC
SPRO>Logistic General>Business Partner>Customer>Define Account Groups and Field Selection for Customers.
Select 0170 Consumer account grp and click on details. You will see the Number range in General Data.
Copy that number range and goto below path and check if the number range is internal or external.
SPRO>Logistic General>Business Partner>Customer>Define and Assign Customer Number ranges. The popup will appear and select Define Number ranges for customer master. Click on display intervals. You will see the number range is mainatined internal or external.
Hope this helps.
Regards,
Chandrakant
Edited by: Chandrakant A on Dec 15, 2009 7:41 PM

SRM 7.0 PO not replicated to Backend ECC 6.0 Ehp 4

Hi SRM Gurus,
SRM 7.0 SP 8 - ECC 6.04 SAPKH60406 ECS
RFx Response to PO -
SRM Local PO is created and is in held status. Purchaser gives the source of supply and Acc Assignment and order it.
PO now is in Ordered status.
Issue: this PO is not replicated to Backend ECC 6.04.
Did the Debugging as follows:
1. BP at B46B_DPO_TRANSFER.
2. Got the PO GUID from the BBP_PD transaction.
3. FM BBP_PD_PO_TRANSFER_EXEC, execute it and it stopped in the breakpoint.
4. On 'FUNCTION 'BBP_PO_INBOUND' DESTINATION lv_destination', hit F6.
5. Checked lt_bapi_return details.
Here there should be information regarding some error during the PO copy to backend.
With this error message you can check why the PO was not created in backend.
ERRORS from Backend are as follows:
1.   No instance of object type PurchaseOrder has been created. External reference:   E BAPI 001
2.   Document contains no items       E    ID 06   Number 010
3.   Please enter items first.              W   ID 05                 005
No XML messages in SXMB_moni both in SRM side and ECC side.
What am i doing wrong here? Any help is highly appreciated.
with regards,
Freemind

RZ20 errors:
Local Errors:   Business to Business Procurement(600)
Error reading export data for EXEC transfer of purchase order
Error in local purchase order; no update of references in EXEC system
Backend Errors:
PO 3000000051: No instance of object type PurchaseOrder has been created. External reference:
Purchase order 3000000051: Document contains no items
Purchase order 3000000051: Transfer Failed; Resubmit
Since we are in SRM 7.0 ECC 6.04 Ehp 4, with PI 7.11 + ROS and no SUS.
doent the system uses ESOA Service for PO replication.
We did CCTR / CPPR scenarios too. Both are sucessful.
Do we need to impl BADI PUR_SE_PO_INTERFACE_OUT_SELECT
But thats for Service hierarchy and Service POs - We dont have Service hierarchy or SUS in our SLD.
IF PO replication also uses PI, what configuration do i need to do?

Limit PO price changes are not replicated to ECC backend

Hi all,
SRM 5.0 ECS SP13.
When I change the value(increase/decrease) in limt PO which is already created(PO is changed for first time) and order the PO,under Overview screen.,the PO total value(at header level) shows the correct changed /new value while at the Item level,the Net price is shown as the old value!However when I go and check the item details,the field "VALUE" and "EXPECTED VALUE" have the changed/new value.
Because of the above issue,the PO changes are not replicated to ECC backend system.When I tested the BAPI BAPI_PO_CHANGE1 with the test data,there is no error mesasge in ECC backend system.
After this,when I change the PO for second time(again value increase/descrease),the total value and net price is shown correctly in SRM and changes are also replicated to ECC backend system!
I have also checked the cong for SPOOLPARAMETERS under Set Control Parameters and eveything is set correctly as shown below
SPOOL_JOB_USER     User that execueds spool job.     CUA_ADMIN
SPOOL_LEAD_INTERVAL     intervall by which the retrytime incr.     60
SPOOL_MAX_RETRY     Max. number of retrys for writing BAPIS     10
Can someone throw some pointers how to resolve the above issue.
Thanks in advance.

Hi
can you recreate the same issue
are you saying that
1. create a limit po for 100 USD and replicated to ECC AS 100 USD total value.
2 . now update the PO in SRM 150 USD and it was not replicated to ECC ?
or
1. limit sc
2. Limit PO
3. update not reached ECC.
Note 1284361 - Limits not transferred to backend purchase order
Symptom
Extended classic scenario.
You have ordered a purchase order with more than one hierarchy item containing a limit.The purchase order is created or updated in the backend system without errors but the limits are missing in the backend purchase order.

Business partner(employee) is not replicated from ECC to CRM

The Business partner Not replicated in CRM.Two Sales organization have been maintained for the employee for the different time lines in ECC.Checked the BDOCs and the validation error occur in FM CRM_BUPA_MAIN_VAL .The BDOCs message was saying the BPGUID was missing .Could anyone please suggest what could be the root cause of the data not replicated from ECC to CRM.

Hi Pragnya,
This is the case where at the time of creation of BP there was some issue with replication.
The BP itself is not there in CRM or only the changes are not reflected?
In such scenarios, perform following steps for successful replication:
1. Go to TCode: CRMM_BUPA_MAP
2. Enter the BP no. {initially it says it does not exist}
3. Enter ERP customer no. and press enter, the BP GUID gets filled
4. Click on "Gather Information about customer" [you can see the status of the object]
5. Now again enter the BP no. -> The customer is available in CRM now.
Regards,
Swagi

PO not replicated in Backend

Hi,
I have created a SC and that SC got approved by all the approvers. PO also generated in SRM. But that PO is not replicated in backend. I have checked that PO in SRM through Process purchase order. The status in "Error in process" and even I have make changes in the PO through Process PO and order it. But then also it has not replicated in backend and the Status is also same as earlier.
Could any one can tell me what should be the right way to replicate this to backend?
I am using Extended classic and self service procurement.

Hello,
You can check if the PO in question can be transferred manually to ECC system, in order to check if there is an error with this action:
- Breakpoint at FM B46B_DPO_TRANSFER;
- SE37 BBP_PD_PO_TRANSFER_EXEC, enter PO header GUID and execute;
- Program will stop at FM where the BP was set;
- Look for statement CALL FUNCTION 'BBP_PO_INBOUND' DESTINATION lv_destination;
- F6 or F5 to debug into ERP (2nd session will start). Here you can check the table lt_bapi_return in order to check if the PO has been created or not in backend.
Kind regards,
Ricardo

MIGO-Mtype-103 batch not crted for blocked stock.in UD want batch

Dear Friends ,
GR at Blocked stock non valuated stock u2013
Batch management is activated.
1)     Creating PO
2)     MIGO with M.Type-103 u2013Goods received for PO in to GR blocked stock.
Stock quantity of material gets updated. But system does not create batch.
3)     While making user decision(UD) in quality management (QA32) , system asking batch .
But batch for that material is not created.
Therefore I am not able to move stock to unrestricted stock. how to overcome this problem.
Regards,
Mahesh.

Hi Mahesh......
Please check this thread.....
Re: Split Valuation configuration
Thanks & Regards,
Rahul

Usage Decision Results to any stock update?

Dear SAP Experts,
I want to know , when usage Decision is taken in QM, stock will be updated or not?
After usage decision say few quantity is scrapped and given usage decision code for the same. I want to know this decision will update to stock or not? if it doesnot update the satock automatically, then what standard movement types are used to post this scrapped quantity.
Please help, and its urgent.
Thanks & Regards,
Mohd Ismail.

Hi,
I want to know , when usage Decision is taken in QM, stock will be updated or not?
May or may not be!
Stock posting through QM and UD are 2 separate events although executed through same TCode.
If you want that stock should be posted automatically in to unrestricted or into block with UD at the same time, you can do that setting in QS51 against appropriate UD code.
If the system status of inspection lot contains UD ICCO SPCO, that means stock posting and UD both have been done
After usage decision say few quantity is scrapped and given usage decision code for the same. I want to know this decision will update to stock or not? if it doesnot update the satock automatically, then what standard movement types are used to post this scrapped quantity
I could not interpret this correctly.
Seems that you are narrating a case where UD and stock posting are done and later you want to scrap the material
You can simply do it through MIGO using 551 movement. (Scrapping against cost center from unrestricted use)
But changing once given UD, will not perform any movement again.

3rd Party with stock update

Hi all,
I am trying to setup proces to track SO through process of purchase.
Much like 3rd party sales processing w. shipping notification with difference that I need to receive goods on stock not on SO consumption and afterwards to ship it away.
I tried to set up automatic Pur.Request out of Sales Order but was unable to do this without account assignment, and thus always ending up creating PO for consumption and skiping stock.
Can somebody give me some pointers on how should I setup this.

Yes, I am aware that in 3rd party scenario there is no stock update cos goods are shipped directly to customer from vendor.
Mine problem is that I have to make process of tracking SO through Purchasing with stock update and I am stuck with creating Pur.Requisition out of SO with account assignment which then triggering GR on SO consumption.
Is there a way to create Pur.Requisition automaticaly out of SO without account assignment. So that I can procure to stock and still have update document flow in SO.
Or maybe this is wrong approach and I should take another one.

GR not replicated in ERP, Stock updated in EWM

Similar Messages

Maybe you are looking for