Recovery_mode column in the archived_dest_status

Please,
From the Oracle Data guard Concept and administration Release 2, ref:b14239.
On chapter 8: Managing Standby Database,section :8.1.1 Starting Up a Physical Standby Database, I read the following note:
On the primary database, query the RECOVERY_MODE column in the V$ARCHIVED_DEST_STATUS view, which displays the standby database’s operation as MANAGED_RECOVERY for Redo Apply and MANAGED REAL TIME APPLY for real-time apply.
This means that, to verify the recovery mode of the standby database, from the primary database, we can query the RECOVERY_MODE from the view V$ARCHIVED_DEST_STATUS.
But my question:
1. the view V$ARCHIVED_DEST_STATUS doesn't exist but the V$ARCHIVE_DEST_STATUS
2. From the primary database when query that columnSELECT RECOVERY_MODE from v$ARCHIVE_DEST_STATUS, I got the following response: IDLE
3. From the standby database when query that columnSELECT RECOVERY_MODE from v$ARCHIVE_DEST_STATUS, I got the following : MANAGED REAL TIME APPLY
there is not an error in that the above text?, or if someone had already verify the recovery mode from the primary database let me know.
Thanks

I was so surpised when I wanted to test what I read, that's why I wanted be sure if someone else had alredy got in this issue.
Ok, It sounds good for me, and hope oracle has already corrected the error.
Thanks

Similar Messages

Problem with binding value on the UI from a calculated column in the view

I have calculated field "Readiness" in my db view, which gets calculated based on other columns in the same table. I have added new column to my EO using "Add from table" option and added the same column from to VO using "Add from EO" option. In my application, I will update a particular date field in the UI and this calculated column "Readiness" in the db will be set to yes or no and this logic is working fine, both date date field and calculated field are in same view object. I have added a attribute binding to this "Readiness" column in my view page. The problem is the calculated column value does not reflect the new value in the db, it shows the old value. I have tried different refresh option for the iterator and ppr option for the field binding. Even after reloading the page, the value shown on the UI page is different from the value in db, other bindings on the UI page works fine, not sure any special settings are required for the Calculated columns. any ideas are appreciated.
Thanks for your help,
Surya

I tried to add soms debugging statements in the EO and getters method, the calcaulated column is not picking the value in db view. I'm not any special iterator/field settings are required at BC level. I'm a newbie, any help is appreciated.
Thanks,
Surya

Data of column datatype CLOB is moved to other columns of the same table

Hi all,
I have an issue with the tables having a CLOB datatype field.
When executing a simple query on a table with a column of type CLOB it returns error [POL-2403] value too large for column.
SQL> desc od_stock_nbcst_notes;
Name Null? Type
OD_STOCKID N NUMBER
NBC_SERVICETYPE N VARCHAR(40)
LANGUAGECODE N VARCHAR(8)
AU_USERIDINS Y NUMBER
INSERTDATE Y DATE
AU_USERIDUPD Y NUMBER
MODIFYDATE Y DATE
VERSION Y SMALLINT(4)
DBUSERINS Y VARCHAR(120)
DBUSERUPD Y VARCHAR(120)
TEXT Y CLOB(2000000000)
NBC_PROVIDERCODE N VARCHAR(40)
SQL> select * from od_stock_nbcst_notes;
[POL-2403] value too large for column
Checking deeply, some of the rows have got the data of the CLOB column moved in another column of the table.
When doing select length(nbc_providercode) the length is bigger than the datatype of the field (varchar(40)).
When doing substr(nbc_providercode,1,40) to see the content of the field, a portion of the Clob data is retrieved.
SQL> select max(length(nbc_providercode)) from od_stock_nbcst_notes;
MAX(LENGTH(NBC_PROVIDERCODE))
162
Choosing one random record, this is the stored information.
SQL> select length(nbc_providerCode), text from od_stock_nbcst_notes where length(nbc_providerCode)=52;
LENGTH(NBC_PROVIDERCODE) | TEXT
-------------------------+-----------
52 | poucos me
SQL> select nbc_providerCode from od_stock_nbcst_notes where length(nbc_providerCode)=52;
[POL-2403] value too large for column
SQL> select substr(nbc_providercode,1,40) from od_stock_nbcst_notes where length(nbc_providercode)=52 ;
SUBSTR(NBC_PROVIDERCODE
Aproveite e deixe o seu carro no parque
The content of the field is part of the content of the field text (datatype CLOB, containts an XML)!!!
The right content of the field must be 'MTS' (retrieved from Central DB).
The CLOB is being inserted into the Central DB, not into the Client ODB. Data is synchronized from CDB to ODB and the data is reaching the client in a wrong way.
The issue can be recreated all the time in the same DB, but between different users the "corrupted" records are different.
Any idea?

939569 wrote:
Hello,
I am using Oracle 11.2, I would like to use SQL to update one column based on values of other rows at the same table. Here are the details:
create table TB_test (myId number(4), crtTs date, updTs date);
insert into tb_test(1, to_date('20110101', 'yyyymmdd'), null);
insert into tb_test(1, to_date('20110201', 'yyyymmdd'), null);
insert into tb_test(1, to_date('20110301', 'yyyymmdd'), null);
insert into tb_test(2, to_date('20110901', 'yyyymmdd'), null);
insert into tb_test(2, to_date('20110902', 'yyyymmdd'), null);
After running the SQL, I would like have the following result:
1, 20110101, 20110201
1, 20110201, 20110301
1, 20110301, null
2, 20110901, 20110902
2, 20110902, null
Thanks for your suggestion.How do I ask a question on the forums?
SQL and PL/SQL FAQ

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

Is there a routine one can use to shift the column of data by one each time the loop index increments? In other words, increment the columns that the data is being saved by using the index?

The device, an Ocean Optics spectrometer in columns of about 9000 cells.I'm saving this as a lvm file using the "write to measurement file.vi". But it doesn't give me the flexibility as far as I can tell.
I need to move the column by the index of the for loop, so that when i = n, the data will take up the n+1 column. (the 1st column is used for wavelength). How do I use the "write to spreadsheet file.vi" to do this? Also, if I use the "write to spreadsheet file.vi", is there a way one can increment the file name, so that the data isn't written over. I like what "write to measurement file.vi" does.
I'd really appreciate any help someone can give me. I'm a novice at this, so the greater the detail, the better. Thanks!!!

You cannot write one column at a time to a spreadsheet file, because a file is arranged linearly and adding a column would need to move (=read and rewwrite elsewhere) almost all existing elements to interlace the new data. You can only append new rows without having to touch the already written data.
Fields typically don't have fixed width. An exception would be binary files that are pre-allocated at the final size. In this case you can write columns by setting the file positions for each element. It still will be very inefficient.
What you could do is append rows until all data is written, the read, transpose, and write back the final file.
What you also could to is build the final array in a shift register and write the entire things to file at once after all data is present.
LabVIEW Champion . Do more with less code and in less time .

Hide column in the adress if it is null and print next line in XML publishe

Hi,
I'm converting oracle report to XML publisher report.
I craeted template rtf with word. everything works fine.
Except address prints null coumns if it is null.
I used if condition in template. something like this...
<?if:B_ADDRESS1!=''?><?B_ADDRESS1?><?end if?>
But I see still it prints null columns.
Any body have idea how can i fix this?
Thanks
pallavi

Hi Guys,
I have built a template for FSG reports. Currently the FSG Reports when run in XML does pull the Display Sets definition for the report. The Display Set is used to hide certain row and Column intersections from the FSG.
So to accomplish this I have coded each column in the template to display data or hide data for a particular row by using the code
<?if:(position()) !=1?><?fsg:RptCell[2]?><?end if?> ------ This means, show the column for all rows except row 1.
Now there are some places I have to hide Column 1 for row 2 and row3 and display for row 1 and row 4.
Can anyone please tell me how I can accomplish this.
Thanks

Format the total value in the column of the graph table

Hello all,
I have a graph table and I need to format the total value in the column of the table.
I am trying to find my table bean with the code below but it's not working in the processRequest. Is there anything else that should be done?
// Get the graph
OAGraphTableBean graphBean = (OAGraphTableBean)webBean.findChildRecursive("MyGraph");
// Get the table
OATableBean tblBean = (OATableBean)graphBean.findChildRecursive("MyTable");
The tblBean is null in the processRequest. In the processFormRequest the tblBean is not null.
Thanks and Regards,
Andrea

Hi,
The code OAGraphTableBean graphBean = (OAGraphTableBean)webBean.findChildRecursive("MyTable"); does not work because in this case I am getting the table but casting to a graph.
The MyTable bean is a child of MyGraph.
When creating a graph bean we have the option to create a table as a child (select your graphTable region in the Structure pane, and choose New > tabularFormat - to create the table).
The table bean child I can get just in the processFormRequest, but the graph I can get in both processRequest and processFormRequest.
I need to get the table bean in the processRequest to format the total value column.
Do you know if is there anything else that should be done to format the total column?
Thanks and Regards,
Andrea

Adding Columns to the matrix in SAP B1 user form using Visual studio 2010

Hi,
Using Visual studio 2010, I have created a SAP B1 user form( b1f ) with one matrix.Matrix is having 5 columns. Its working properly. Later, I want to add few more columns. Then I added columns to the matrix as I have created columns initially. But, it does not saves.
i.e, Whenever I run, In B1 I could see only old columns. Newly created columns are not showing.So, I closed the .net project and opened again. Created columns are not showing in visual studio b1f itself. So, I created again and saved. But, its not saving.I tried it many times.
What I am missing?
Any help is appreciated.
Thanks in advance,
Parvatha Solai.N

Hi Parvatha,
Are you using B1 Studio? Anyway try to clean the solution first then rebuild it. This would re-copy files to the output directory, that contain your changes.
Best regards,
Pedro Magueija

Associative array type for each blob column in the table

i am using the code in given link
http://www.oracle.com/technology/oramag/oracle/07-jan/o17odp.html
i chnages that code like this
CREATE TABLE JOBS
JOB_ID VARCHAR2(10 BYTE),
JOB_TITLE VARCHAR2(35 BYTE),
MIN_SALARY NUMBER(6),
MAX_SALARY NUMBER(6),
JOBPIC BLOB
CREATE OR REPLACE PACKAGE associative_array
AS
-- define an associative array type for each column in the jobs table
TYPE t_job_id IS TABLE OF jobs.job_id%TYPE
INDEX BY PLS_INTEGER;
TYPE t_job_title IS TABLE OF jobs.job_title%TYPE
INDEX BY PLS_INTEGER;
TYPE t_min_salary IS TABLE OF jobs.min_salary%TYPE
INDEX BY PLS_INTEGER;
TYPE t_max_salary IS TABLE OF jobs.max_salary%TYPE
INDEX BY PLS_INTEGER;
TYPE t_jobpic IS TABLE OF jobs.jobpic%TYPE
INDEX BY PLS_INTEGER;
-- define the procedure that will perform the array insert
PROCEDURE array_insert (
p_job_id IN t_job_id,
p_job_title IN t_job_title,
p_min_salary IN t_min_salary,
p_max_salary IN t_max_salary,
p_jobpic IN t_jobpic
END associative_array;
CREATE OR REPLACE package body SHC_OLD.associative_array as
-- implement the procedure that will perform the array insert
procedure array_insert (p_job_id in t_job_id,
p_job_title in t_job_title,
p_min_salary in t_min_salary,
p_max_salary in t_max_salary,
P_JOBPIC IN T_JOBPIC
) is
begin
forall i in p_job_id.first..p_job_id.last
insert into jobs (job_id,
job_title,
min_salary,
max_salary,
JOBPIC
values (p_job_id(i),
p_job_title(i),
p_min_salary(i),
p_max_salary(i),
P_JOBPIC(i)
end array_insert;
end associative_array;
this procedure is called from .net. from .net sending blob is posiible or not.if yes how

Ok, that won't work...you need to generate an image tag and provide the contents of the blob column as the src for the image tag.
If you look at my blog entry -
http://jes.blogs.shellprompt.net/2007/05/18/apex-delivering-pages-in-3-seconds-or-less/
and download that Whitepaper that I talk about you will find an example of how to do what you want to do. Note the majority of that whitepaper is discussing other (quite advanced) topics, but there is a small part of it that shows how to display an image stored as a blob in a table.

Problem with columns in the middle of my book

I am writing my second book with Pages 2.02 and have run into a problem with columns. I want to add a long list of items as a list with check boxes for readers to check off. If I paste in enough text for three or four pages of two columns it gets messed up in various ways - the text flows into the following text if I don't use section breaks at the end instead of layout breaks, if I use section breaks it solves that one, but if I add anything to the list it changes all the columns across the pages so that one or several of the pages has way less in the right column than in the left. So far the left column fills the entire page all the time, but the right column has lots of spaces. If I switch back and forth from one column to two, it fixes it. If I add text before the list section it messes everything up again and because there is a section break I end up with a little bit of text on the last page and a huge gap before the single column part that follows.
Does anyone know how to get reliable results that will not mess me up when adding content before the list or in the list itself?
PowerBook G4 Mac OS X (10.4.8)

Hi Cymru,
Thank you for thinking about my problems. I guess I s half asleep when I posted and it didn't make sense.
I have so far 77 pages of the book divided into several chapters via section breaks. Inside the 5th section there is almost two pages of paragraphs. Those paragraphs could become 3.75 pages or who knows how long before the list of items. The list of items is 226 items separated by carriage returns and go from one word with 5 characters to 7 words and 34 characters. It needs to be a list with check boxes before them so that the user can check off the items that apply. It is a workbook about turning bipolar into an advantage and is currently 8.5 x 11 and printed on my laser printer for now, but when completed will be more like 8 x 10, so it needs to resize without major hassles.
I have tried every combination of breaks to get the list to flow in two columns, but perhaps have not done the correct combination. I show invisibles and layout. At the end of my paragraphs I do a paragraph return. I then do either a section break or a layout break, followed by a paragraph return and another layout or section break. I then put my curser before the paragraph break, but after the first section/paragraph break, and set columns to 2, evenly divided by default with 3.2026" columns and .3375" gutter, but I want them to change with page size in the future.
Once set up, I copy the text out of BBEdit and paste into the left column. It takes up several pages because it is formatted to do double spaces, so I use one of my styles to make it bold and single spaces. I then apply list style with image bullets and one of the default box images that came with Pages. There are 5 items in each column on the first page because it is close to the bottom, but flows into the next two pages. (with text edits it might end up 20 items in each column on the first page) The second page has 39 items in each column and the last page has 8 items in the left column only, but if with section breaks take up the whole page and the next paragraphs start on the next page. If I then add items to the list, every page gets messed up and the second page ends up with 39 on the left column and less items in the right column for each added item.
If I use layout breaks instead of section breaks, the paragraphs following my lists (now with only one column) end up under the list. What that means is I can see my bold items, but beneath them are my paragraphs that belong after the list. I can see the layout break at the end of the list, but the columns that are shown as part of the 'view layout' are visible right over the single column text also for the rest of the page. The only way to solve that is to go with section breaks and put up with the gap from the end of the list to the following paragraphs.
I hope this makes more sense.
Tom
PowerBook G4 Mac OS X (10.4.8)

Download from ALV are all in one column including the header

Hello All,
We are having problems with the download of excel from ALV grid. what happens is that instead of the data dispalying in different columns, it is all in one column, including the header. what could be the problem? this only occurs in the production system but in the development and quality it is ok.
Thanks for your help.

Hi,
We also used the option download to local file and it works fine. Only the button download to excel is not working as expected.

GR and IR as separate columns in the BEx report

Hi,
I am working on a Purchasing report in which the user needs the snap shot of PO history,Like PO no.,Item,Netprice,PO Qty,Net order value,GR no.,IR number etc.
I created a view on EKPO and EKBE.Here,based on the BELNR(Material document) field we are taking GR and IR values.(When VGABE =1 BELNR=GR and VGABE = 2 BELNR=IR).I created DSO to load the data.The problem is they need the GR and IR as separate columns in the BEx report.Could u please help me how to achieve this in BI?
Thanks & Regards,
Dinakar.

Hi Neel,
I need the BELNR has to be split into GR No.and IR No. separately based on VGABE field.
Thanks & Regards,
Dinakar.

Radio group in classic report based on another column on the same row.

Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
Application Express 4.1.0.00.32
How can I have a radio group column based on an LOV utilizing another column on the same row of the report?
For example: what if I had a survey application and depending on the likert scale that was assigned to the question there would be different possible answer choices:
Question 1 on row 1 of the report: The class instructor was friendly?
Likert scale choice is Agreement.
Choices on Radio Group: Strongly Agree, Agree, Undecided, Strongly Disagree
Question 2 on row 2 of the report: The class offered good materials?
Likert scale choice is Quality.
Choices on Radio Group: Excellent, Below Average, Average, Above Average, Excellent
The radio group can change per row depending on the Likert scale assigned to the question which is assigned to a different column on the row.
Can LOV utilize the column? :
SELECT scale_text
FROM scale_choices
WHERE scale_category_choice_id = 2 <<= this would be the Likert scale identifier
ORDER
BY display_order

Here is the answer:
APEX_ITEM.SELECT_LIST_FROM_QUERY(
p_idx IN NUMBER,
p_value IN VARCHAR2 DEFAULT NULL,
p_query IN VARCHAR2,
p_attributes IN VARCHAR2 DEFAULT NULL,
p_show_null IN VARCHAR2 DEFAULT 'YES',
p_null_value IN VARCHAR2 DEFAULT '%NULL%',
p_null_text IN VARCHAR2 DEFAULT '%',
p_item_id IN VARCHAR2 DEFAULT NULL,
p_item_label IN VARCHAR2 DEFAULT NULL,
p_show_extra IN VARCHAR2 DEFAULT 'YES')
RETURN VARCHAR2;

How do I read from a text file that is longer than 65536 lines and write the data to an Excel spreadsheet and have the data write to a new column once the 65536 cells are filled in a column?

I have data that is in basic generic text file format that needs to be converted into Excel spreadsheet format. The data is much longer than 65536 lines, and in my code I haven't been able to figure out how to carry over the data into the next column. Currently the conversion is done manually and generates an Excel file that has a total of 30-40 full columns of data. Any suggestions would be greatly appreciated.
Thanks,
Darrick
Solved!
Go to Solution.

No need to use nested For loops. No need for any loop anyway. You just have to use a reshape array function. The picture below shows how to proceed.
However, there may be an issue if your element number is not a multiple of the number of columns : zero value elements will be added at the end of the last column in the generated 2D array. Now the issue depends on the way you intend store the data in the Excel spreadsheet : you could convert the data as strings, replace the last zero values with empty strings, and write the whole 2D array to a file (with the .xls extension ) using the write to spreadsheet function. Only one (minimal) problem : define the number of decimal digits to be used;
or you could write the numeric array directly to a true Excel spreadsheet, using either the NI report generation tools or ActiveX commands, then replace the last elements with empty strings.
We need more input from you to decide how to solve these last questions.
Message Edité par chilly charly le 01-13-2009 09:29 PM
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Example_VI.png ‏10 KB

Recovery_mode column in the archived_dest_status

Similar Messages

Maybe you are looking for