Recreate SAP and database services in Windows
Hi!
I'm running my sandbox in a wmware enviroment and yesterday the C: partion got corrupted and I managed to "save" the other drives where the SAP and database are installed.
Is there any way to recreate the SAP and database services in another Windows installation? (manually or automatically)
That way I don't need to reinstall the whole system....and no there is no backup or snapshot since the system is not complete.
But if I get the database to start I should be able to do a backup and then do a new installation and import the backup!?
Thanks for any input
rollo
What is the database platform?
If it is SQL Server try attaching the data & log files to another instance SQL instance at the same release & patch level, if that works the database is intact so recovery should be possible.
From there rebuild your vmware box and treat the SAP install as though you are doing a 'system copy' so -
-Install & patch Win2003
-Install & patch SQL Server
-Install a 'blank' SAP Central Instance & update kernel
-Attach SQL database
-Use the SAP's SQL Migration tools to prepare DB & instance
-cross fingers & startsap
-make a backup
Check out http://servcie.sap.com/instguides for the System Copy guide that matches your release
If that helps please reward points
Cheers
Danny
Similar Messages
-
Starting and stopping services of SAP and database
pls tell what are the Starting and stopping services of SAP and database
Hi Ranga,
The services dealing with SAP and database(Ex: Oracle in this case) are:
SAP<SID>_<Instance No.> (For ex: SAPECC_01)
SAPOsCol
Oracle<SID><No>Listener
OracleCSSservice
OracleService<SID>
Reward points if it is helpful##
Thanks & Regards,
Santhosh P
Please change the status to answered if you got the solution...
Message was edited by:
Santhosh Kumar P -
Hi,
Please advise on the below issue.
While using oracle forms 6i and database 11g in windows 7, the application getting closed while working on some forms.
May i know what is to be done?MoNo wrote:
Hi Friends...
I'm using windows7 32 bit.
<snip>First, please be aware that oracle products are NOT certified to run on ANY 'home' edition of ANY version of Windows.
Second, did you read the instructions on the page where you downloaded the software -- specifically the part about unzipping TWO downloaded zip files into the SAME directory?
Third, did you read and heed the installation guide, or did you just go straight to 'setup.exe'? -
Stopping Database Service in Windows 2008
Hi,
Our Oracle 11g R2 Database 2 node rac runs on Windows 2008 Release 2.
I use srvctl to stop database service instead of stopping the oracle database service on Services (services.msc).
Even after stopping the services using srvctl, the oracle.exe will come in the process tab of Task Manager. In this case i need to invoke services.msc and stop the database services manually.
Is there any way to stop the oracle process or the oracle services using srvctl.
Thanks in advance for your help.
Thanks,
Yusuf944470 wrote:
Hi,
Our Oracle 11g R2 Database 2 node rac runs on Windows 2008 Release 2.
I use srvctl to stop database service instead of stopping the oracle database service on Services (services.msc).
Even after stopping the services using srvctl, the oracle.exe will come in the process tab of Task Manager. In this case i need to invoke services.msc and stop the database services manually.
Is there any way to stop the oracle process or the oracle services using srvctl.
Thanks in advance for your help.
Thanks,
YusufWhen you stop using SRVCTL, can you check the alert log file whether the instance was completely down?
And all memory freed?
Once you stop the service using SRVCTL, what is the memory usage from task manager for "oracle.exe"
Check above points and post your findings.
Also for better confirmation, check if is it ASM instance? just an crosscheck. -
OPS$ and database services
All,
I'm on 10.1 Solaris with an "OPS$" (externally identified) user, through which all application logins (batch loads) are made. I also have a range of database services and would like to connect this user to a specific service based on the batch type (e.g. connections for the "london" batch would be made to the "london" service and so on).
Connections are made via the Perl DBI but I'm also trying to test via sqlplus, which is the easiest place to start.
The SQL*plus documentation states that the connection identifier cannot be used with an OPS$ user:
"You cannot enter a connect_identifier if you use a default logon."
That seems pretty final to me.
But has anyone got any ideas or experience of how I might connect to a service with an OPS$ user? Or even register with a service once I'm logged in, for example?
Thanks> I also have a range of database services and would like to connect this user to a specific
service based on the batch type (e.g. connections for the "london" batch would be made to
the "london" service and so on).
Why? What problem are you solving by doing it this way?
> But has anyone got any ideas or experience of how I might connect to a service with an
OPS$ user?
Not sure how you can. To connect as an OPS$ user requires a local IPC connection. You cannot use a TNS alias or set it via TWO_TASK - as then the connection would be via TCP to the listener and how can it use o/s authentication as you could be coming from anywhere across the network.
Or am I missing something here? -
SAP and Database Encrption on SQL Server 2005 or 2008
Hi. I searched as best I could for any existing threads on this topic, and could not find any, so I hope it's OK to raise a new one.
We're running SAP ECC 6.0 on a SQL 2005 database. Database size is around 3.3 TB, with Trans Log of about 550GB, storage is HP EVA.
I've been asked to report on how Database Encryption would impact our systems, both from the perspective of enabling it initially and then how it would affect performance going forward.
I've read a few White Papers, for example:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4ab89e84-0d01-0010-cda2-82ddc3548c65?QuickLink=index&overridelayout=true
.. and from what I'm reading, it looks like I would want to be moving to SQL Server 2008 as a first step. Does anyone have any experience of implementing SQL encryption for a SAP database, either in 2K5 or 2K8?
All comments or help will be welcomed.
Thanks
Steven ClarkHello Steven,
You can also check the following websites:
http://blogs.msdn.com/b/saponsqlserver/archive/2011/09/05/decreased-disk-space-requirement-for-sap-unicode-systems.aspx
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50c5de8f-282a-2e10-cb8a-a5859a0994a4&overridelayout=true
And, SAP notes:
[1581700 PAGE compression support for DDIC & Hom./Het. System Copy|http://service.sap.com/sap/support/notes/1581700]
[1488135 Database compression for SQL Server|http://service.sap.com/sap/support/notes/1488135]
Regards,
Eduardo Rezende -
Cannot run Apatche and FullFilment services on Windows 2000.
Hi,
We are using Oracle EBS 11i with database 9i.
Today morning we had face virus attacked on ERP server.
We have windows env and single node installation.
After restoration of backup We are unable to start the following serviices on windown env:
This is production system.
Please assist ASAP.
Log: of starting services of application and our dattabase is working fine.
Setting service Oracle Apache Server PROD_styloapps to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adapcctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
Starting Oracle Apache Server PROD_styloapps ...
adapcctl.cmd exiting with status 2
.end std out.
The service is not responding to the control function.
More help is available by typing NET HELPMSG 2186.
.end err out.
Setting service OraclePRODOra806_1TNSListener80APPS_PROD to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adalnctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : d:\oracle\prodora\8.0.6
LOCAL : PROD
ORACLE_SID :
PATH : d:\oracle\prodora\8.0.6\bin;d:\oracle\prodcomn\util\java\1.4\j2sdk1.4.2_04\bin;d:\oracle\prodappl\au\11.5.0\bin;d:\oracle\prodappl\fnd\11.5.0\bin;d:\oracle\prodappl\ad\11.5.0\bin;d:\oracle\prodcomn\util\java\1.4\j2sdk1.4.2_04\bin;d:\oracle\prodora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\prodcomn\util\unzip\unzip;d:\oracle\prodora\8.0.6\bin;d:\oracle\prodcomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\VC98\msdev98\BIN;C:\MICROS~1\VC98\BIN;C:\VC98\TOOLS\WINNT;C:\VC98\TOOLS;d:\oracle\prodappl\au\11.5.0\bin;d:\oracle\prodappl\fnd\11.5.0\bin;d:\oracle\prodappl\ad\11.5.0\bin;d:\oracle\prodcomn\util\java\1.4\j2sdk1.4.2_04\bin;d:\oracle\prodora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\prodcomn\util\unzip\unzip;d:\oracle\prodora\8.0.6\bin;d:\oracle\prodcomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\MKSNT\bin;C:\WINDOWS;C:\WINDOWS\system32
LD_LIBRARY_PATH : d:\oracle\prodora\8.0.6\lib
ECHO is off.
The service "OraclePRODOra806_1TNSListener80APPS_PROD" is already started
adalnctl.cmd exiting with status 0
.end std out.
.end err out.
Setting service OracleConcMgrPROD_styloapps to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adcmctl.cmd start
Timeout specified in context file: 1000 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
Starting concurrent manager for PROD ...
adcmctl.cmd exiting with status 0
.end std out.
.end err out.
Setting service OracleFormsServer-Forms60PROD_styloapps to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adfrmctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
ECHO is off.
ECHO is off.
Starting forms server for PROD on port 9000 ...
adfrmctl.cmd exiting with status 2
.end std out.
The service is not responding to the control function.
More help is available by typing NET HELPMSG 2186.
.end err out.
Setting service OracleReportServer-Rep60_PROD to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adrepctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
The service "OracleReportServer-Rep60_PROD" is already started
adrepctl.cmd exiting with status 0
.end std out.
.end err out.
Setting service Oracle Metrics Client PROD_styloapps to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adfmcctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
The service "Oracle Metrics Client PROD_styloapps" is already started
adfmcctl.cmd exiting with status 0
.end std out.
.end err out.
Setting service Oracle Metrics Server PROD_styloapps to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\adfmsctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Sat 02/12/2011 01:15 AM
The service "Oracle Metrics Server PROD_styloapps" is already started
adfmsctl.cmd exiting with status 0
.end std out.
.end err out.
Setting service Oracle Fulfillment Server PROD_styloapps to mode 2
Executing service control script:
d:\oracle\prodcomn\admin\scripts\PROD_styloapps\jtffmctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
You are running jtffmctl.cmd
Sat 02/12/2011
01:15 AM
"Starting Fulfillment Server for "PROD" on port "9300" ...\n"
jtffmctl.cmd exiting with status 2
ERRORCODE = 2 ERRORCODE_END
.end std out.
The service is not responding to the control function.
More help is available by typing NET HELPMSG 2186.
.end err out.
[Service Control Execution Report]
The report format is:
<Service> <Script> <Status>
Oracle Apache Server PROD_styloapps adapcctl.cmd Started
OraclePRODOra806_1TNSListener80APPS_PROD adalnctl.cmd Started
OracleConcMgrPROD_styloapps adcmctl.cmd Started
OracleFormsServer-Forms60PROD_styloapps adfrmctl.cmd Started
OracleReportServer-Rep60_PROD adrepctl.cmd Started
Oracle Metrics Client PROD_styloapps adfmcctl.cmd Started
Oracle Metrics Server PROD_styloapps adfmsctl.cmd Started
Oracle Fulfillment Server PROD_styloapps jtffmctl.cmd Already Started
Oracle Restricted Apache Server PROD_styloapps adaprstctl.cmd Disabled
Oracle Apache Server PROD_styloapps for PL/SQL adapcctl.cmd Disabled
Oracle TCF SocketServer PROD_styloapps adtcfctl.cmd Disabled
Oracle ICSM PROD_styloapps ieoicsm.cmd Disabled
Oracle iProcurement Bulk Loader PROD_styloapps icxblkctl.cmd Disabled
ServiceControl is exiting with status 0
Thanks,
FayazAfter restoration of backup We are unable to start the following serviices on windown env:
This is production system.
Please assist ASAP.For production issues, please log a SR with severity 1.
Please run AutoConfig and make sure it completes successfully.
Also, check the startup log files for details about the error.
Thanks,
Hussein -
Can Oracle 11g R2 RAC and database sit on Windows 2008 R2?
Thanks.
2008 32 bit it is certified...
2008 64 not certified yet.
the certification matrix within MOS does not indicate 2008 R2 so you might be good for 32 bit.
NOTE: just double checked the matrix and it is certified for windows 2008 R2 x64
Product Oracle Server - Enterprise Edition
Product Release 11gR2 RAC
Product Version 11gR2 RAC
Tier Server
Tier Product N/A
Tier Product Version N/A
Platform Microsoft Windows x64 (64-bit)
Platform Version 2008 R2
Certification Status Certified
Expand All | Collapse All
Expand to view Notes Notes
Expand to view Certification Notes Certification Notes
Edited by: rui_catcuddler on Jul 22, 2010 10:02 AM -
Starting and Stopping Services Based on Network
Hi everyone,
This is something I've been playing with and I'd like to share it with you and get your thoughts.
The services I want to run at any given point depend on what network I'm attached to. For example, if I'm at home, I'll want avahi-daemon and cupsd started but I won't need iptables, since I'm behind my router's firewall. On the other hand if I'm at an internet cafe I need iptables but not the other two.
What I've done is set up a script in /etc/NetworkManager/dispatch.d which starts services based on the UUID of each connection (extracted from that connection's file in /etc/NetworkManager/system-connections.
I'm currently using the following script:
#!/bin/bash
IF=$1
STATUS=$2
function start_service {
for i in "$@"
do
if [ `/usr/bin/systemctl show "$i".service | grep -c "ActiveState=inactive"`=1 ]
then
/usr/bin/systemctl start "$i".service
fi
done
function stop_service {
for i in "$@"
do
if [ `/usr/bin/systemctl show "$i".service | grep -c "ActiveState=active"`=1 ]
then
/usr/bin/systemctl stop "$i".service
fi
done
if [ "$IF" = "wlan0" ] && [ "$STATUS" = "up" ]; then
UUID=`nmcli --nocheck -t --fields UUID con status`
case $UUID in
f5320fcd-43e2-4cc1-ba1a-9606f66b5332)
start_service avahi-daemon cupsd
logger "M5DKQ (home network) up"
5bfff3c5-c349-436b-953b-90de15c854d7)
start_service iptables
logger "EVO (4G hotspot) up"
40d74743-f809-41ce-821c-71f9f40b8513)
logger "GuestAccess (office guest network) up"
start_service iptables
logger "Starting cafe-specific services"
esac
fi
if [ "$IF" = "wlan0" ] && [ "$STATUS" = "down" ]; then
stop_service avahi-daemon cupsd iptables
logger "Stopped location-specific services"
logger "wlan0 down"
fi
Is there a better way to do this, like maybe a systemd custom target? Is there a cleaner way to script this?
Thanks in advance,Hi Ranga,
The services dealing with SAP and database(Ex: Oracle in this case) are:
SAP<SID>_<Instance No.> (For ex: SAPECC_01)
SAPOsCol
Oracle<SID><No>Listener
OracleCSSservice
OracleService<SID>
Reward points if it is helpful##
Thanks & Regards,
Santhosh P
Please change the status to answered if you got the solution...
Message was edited by:
Santhosh Kumar P -
Hi,
I have a Database with the RDBMS software installed on the server's local C: but the database itself installed on a SAN ( via the E: )
My system disk has crashed i.e. C: and there is no backup of this drive - so it is being replaced ! Hence I have lost my RDBMS software ( which I can reinstall ok again ) - which I presume will sort out some new registry entries. I can even reconfigure the Listener if required
However what do I do about the Services that have been lost which effectively start / stop my Database and Database Services
Can I simply manually recreate these services - how is this done ?
thanks,
Jimuse oradim utility to create DB service
-
Seperating management and normal service on two different LAN interfaces
We would like to keep administration and general service of Windows Servers seperate on two different LAN interfaces "A" and "B" (on "dual home" machines i.e. machines with two network interfaces).
Is this feasible so that no administration can be performed on LAN Interface A, all regular Services runs over LAN Interface A and all administration has to be done over B?
Reasoning for this is security - only certain people and machines would be granted access to the management LAN.
Any ideas how this is best achieved?
Thanks in advance
Hi,
We can use the firewall to achieve your goal.
Firstly, disable all the port in firewall of LAN B.
Enable the port which used by the services in firewall of LAN B.
After that all traffic from LAN B, which is not related to the services will be denied on the server.
This is the general method of protecting the server on internet. (It is usually to be performed by a hardware firewall).
Best Regards.
Steven Lee
TechNet Community Support -
Content of SAP SQL Database and backup
1. The SAP database / data files store in the folder <SID>DATA with extension mdf, what does it store? Does it content the structure of the database only or inclusive of the daily entry of the SAP data?
2. Will it be sufficient to backup the SAP SQL Database with the SQL database ONLINE for recovery purpose in case of server crash?Alvin Teo wrote:
Markus,
Thank you for your response.
I would like to clarify further that other than the database is required to be backup, any other SAP related system file that require to be include in the backup file occasionally, like during daily or weekly backup?
Yes - the instance directory and the Windows OS including the registry
Apart from this, do you happen to know where can I obtain the documentation which can assist me to do hardware sizing for SAP systems?
Usually it´s done the following way:
- the customer creates a project under http://service.sap.com/quicksizer
- the hardware partner takes this project and offers a machine that fits
Markus -
My iTunes keeps crashing. I have uninstalled and reinstalled, including recreating the entire database, and it is still doing it. I recently upgraded to 10.5. Any ideas? I am running Windows 7 on a new, decent, laptop. The music is on the laptop's hard drive. There is plenty of hard drive space left.
iTunes starts fine, and I can do stuff, then within a minute or two or three it gives me an error message pop-up.The error message says:
iTunes has stopped working.
Windows can check nline for a solution to the problem.
-> Check online for a solution and close the program
-> Close the program
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.5.0.142
Application Timestamp: 4e9243f2
Fault Module Name: MSVCR80.dll
Fault Module Version: 8.0.50727.6195
Fault Module Timestamp: 4dcddbf3
Exception Code: c0000005
Exception Offset: 0001500a
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
I've chosen both items, neither does anything but close the program. This problem is new with iTunes 10.5; I did not have it before. -
How to find out the IPS and DS Service Pack and patch levels in windows server.
Hi,
I have installed the Information Platform Services 4.0 and Data services 4.0 in windows QA system, now we need to install the same version of IPS & DS in windows PRD system for this how could we find out the exact version of IPS & DS ( Service pack and patch levels ) and where we can find the same.
Many Thanks,
SudheerHi Sudheer,
On a Windows Operating Systems you can check the “Programs and Features” in control panel.You can see a list of both the Name and Version number of SAP BusinessObjects that is installed.
option 2:
Open CMC go to Settings. In the properties, you will find the Product Version.
Please check below SAP notes for more information.
http://service.sap.com/sap/support/notes/1602088
Regards,
Pavan -
SQl Server Installation failing for Database Engine and Its Services
Hi,
I was trying to install SQL SERVER 2008 R2 on VM having 500 GB hard disk and 16 GB RAM.
OS is Windows Server 2008
But it fails for Database Engine.
Installation Details are as Below.
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068119551
Exit facility code: 1211
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-10-13 18:41:01
End time: 2014-10-13 19:26:32
Requested action: Install
Log with failure: C:Program FilesMicrosoft SQL Server100Setup BootstrapLog20141013_183354Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.1600.1%26EvtType%3d0x476BF04A%400xBB814387
Machine Properties:
Machine name: KVS-IN-WFAN092
Machine processor count: 4
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: di-softwareSoftwaresSQLSQL_2008_R2_Enterprisex64setup
Installation edition: ENTERPRISE
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITYNETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:Program FilesMicrosoft SQL Server100Setup BootstrapLog20141013_183354ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITYLOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:Program FilesMicrosoft SQL Server
INSTALLSHAREDWOWDIR: C:Program Files (x86)Microsoft SQL Server
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:Program FilesMicrosoft SQL Server
INSTANCEID: SQLServer
INSTANCENAME: SQLSERVER
ISSVCACCOUNT: NT AUTHORITYNetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITYNETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: KRONOSENGsuperuser
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 1
UIMODE: Normal
X86: False
Configuration file: C:Program FilesMicrosoft SQL Server100Setup BootstrapLog20141013_183354ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:Program FilesMicrosoft SQL Server100Setup BootstrapLog20141013_183354SystemConfigurationCheck_Report.htm
And Error in log file are maily as below.
2014-10-13 19:26:27 Slp: Completed Action: SqlBrowserConfigAction_install_Startup_Cpu32, returned True
2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64_Install_Startup_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64_Install_Startup_postmsi The condition tests feature: SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64. There are 11
dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "SqlBrowserConfigEngAction_install_Startup_Cpu64" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: SqlBrowserConfigEngAction_install_Startup_Cpu64 The condition tests feature: SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64. There are 11 dependant features. The feature is tested
for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "SqlEngineConfigAction_install_startup_Cpu64" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: SqlEngineConfigAction_install_startup_Cpu64 The condition tests feature: SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64. There are 11 dependant features. The feature is tested
for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64_Install_Startup_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64_Install_Startup_postmsi The condition tests feature: MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64. There are 2 dependant
features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "AgentInstall_AgentInstallStartup_Cpu64" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: AgentInstall_AgentInstallStartup_Cpu64 The condition tests feature: MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64. There are 2 dependant features. The feature is tested for results:
ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64_Install_Startup_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64_Install_Startup_postmsi The condition tests feature: SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64. There
are 3 dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_FullText_Adv_sql_fulltext_Cpu64_Install_Startup_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_FullText_Adv_sql_fulltext_Cpu64_Install_Startup_postmsi The condition tests feature: SQL_FullText_Adv_sql_fulltext_Cpu64. There are 3 dependant features. The feature
is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "FulltextConfigAction_install_startup_Cpu64" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: FulltextConfigAction_install_startup_Cpu64 The condition tests feature: SQL_FullText_Adv_sql_fulltext_Cpu64. There are 3 dependant features. The feature is tested for results:
ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi The condition tests feature: SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64. There
are 11 dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi The condition tests feature: MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64. There are
2 dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi The condition tests feature: SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64.
There are 3 dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_FullText_Adv_sql_fulltext_Cpu64_Install_StartupFinalize_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_FullText_Adv_sql_fulltext_Cpu64_Install_StartupFinalize_postmsi The condition tests feature: SQL_FullText_Adv_sql_fulltext_Cpu64. There are 3 dependant features.
The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Completed Action: PostMsiTimingConfigAction, returned True
2014-10-13 19:26:27 Slp: Completed Action: ExecuteStandardTimingsWorkflow, returned True
2014-10-13 19:26:27 Slp: ----------------------------------------------------------------------
2014-10-13 19:26:27 Slp: Running Action: ExecuteExtendedTimingsWorkflow
Thanks,
MaheshI have uploaded detail.txt at below url.
http://m.uploadedit.com/b041/1413264342685.txt
Hi Mahesh,
According to log file, I find the message ‘The setup100.exe.config file was not found, therefore the DTSWizard and SQLWatson app config files were not replaced’. It seems that the SQL Server setup file is not complete. Please check that if the SQL Server
setup file is corrupted, if it is corrupted, please download it again and reinstall SQL Server 2008 R2.
However, if there’s no problem with the setup file, please check that if there is third-party software such as anti-virus software on your computer blocking the process of SQL Server installation. In addition, make sure that you choose ‘Run as administrator’
to launch the setup and configure SQL Server service accounts appropriately with administrator permission during the installation.
For more details about this error, please review the following similar thread.
http://answers.flyppdevportal.com/categories/sqlserver/sqlsetupandupgrade.aspx?ID=ad794a97-09ae-4aae-9d68-0b06f9af3e16
Thanks,
Lydia Zhang
Maybe you are looking for
-
Tried to use 'render/lighting effects' on 5 more or less new different laptops now. All kind of Window versions. They all have at least 4GB RAM. The Graphic Card is compatible. Layer to work on is RGB-Type. It's all about Photoshop CC 2014, trial ver
-
I have a iPhone 5c 16gb and don't have much storage left. If I delete my back up will I lose all of my information? If so, how will I be able to get it back? Or is it even possible. Here's a little back ground on my other issue, my HP laptop no longe
-
When I shop using the iTunes app for movies,tv shows etc... My iPad just inexplicably shuts off. Any ideas why or how I can stop this from happening?
-
Javax.naming.AuthenticationException [LDAP: error code 49 - 80090308
i am getting a problem in connection. javax.naming.AuthenticationException: [LDAP: error code 49 - 80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error, data 525, vece plz suggest
-
Creative Suite Design Premium 5.5 Student Edition
I have a Serial Number for the product Creative Suite Design Premium 5.5 Student Edition, but i cannot download it from the Adobe Website. Where i can download this Software?