Red line swf animation included in Cap 3 Gallery

Captivate 2 included the source (.fla) file for the
animations included in the Gallery folder. Captivate 3 doesn't.
Does anyone know if I can download them from somewhere?
Thanks

Hi again and my most abject and humble apologies as I see
that mu PC stuttered and posted no less than 3 times to your
original query.
Secondly, my most abject and etc as I have now tested and
also cannot edit the redline swf files. All that I can assume is
that the original fla was published and then imported into a new
flash file to create a one frame output that allows looping even
when Captivate pauses due to a click box or button (standard
workaround for swf files that stop in Captivate presentation).
To all you other Captivators out there, please help here as I
am now out of ideas!!!!

Similar Messages

Exporting to one .swf when including other swf animations

Hi
When exporting my project to flash, three files are created.
I am not using any skins etc, I am just trying to incorporate two
animations (one per slide) and finish with one overall .swf file.
I have managed to do this in two other slides, though! Which
is most frustrating!
So just to reiterate:
When I publish the file, the two animations I am using are
exported again along with the rest of the publication. So I have
the main swf, which calls in the other two .swf animations when
required. I need to have just one file as a result.
Please help!!

Welcome to our community, t1mmie
Are you referring to the supplied animations? (Arrows,
Highlights, etc)
If so, there are a few that refuse to embed. For those, you
need to edit the source files in Flash and export from Flash as
Flash 6 format. Once you get them in Flash 6 format, add them again
and they should embed.
You may download the source files for animations that don't
have the source from the Captivate Exchange.
Click here to
visit the Captivate Exchange.
Cheers... Rick

Battery Icon with Red Line on BB 8310

So, how pervasive is the problem of theBlackberry 8310 and its icon with the red line across from it? Is it a problem with the battery? Or is it a problemwith the phone? IS there any fix?
Mine came brand new in a box a few daysago. It came with a blue battery (C-S2). As soon as I put the battery into thephone, the dreaded Icon (battery with a red line through it) showed up. I charged it, thinking that means the batteryis empty and left it charging for over 5 hours, hoping the Icon will go away.It never did, and now 4 days later and an infinite number of battery pulls, some with a twist or two, it is still there. If it was any otherpiece of technology I would dismiss it as junk. But, oh, this is the famous BB.
Instead, I did some research, have spentupwards of 15 hours over the last 4 days, trying to figure it out. I ran intolots of things on the Net, including the crackberry postings with people sayingthat they got rid of the problem by dropping (!!) the BB from 3-4 feet,sometimes repeatedly, until it fixed itself. Others report the problem aftersome time of use (flaky construction?). On this forum alone there are at least4 recent postings with the identical problem (search for “8310 battery line”and find the post of “Spyridonas” 12-13-08, of “black_black_b” 06-10-09, of “hades” 09-27-09 and of “Alien_X” 09-28-09. None of those seems to have got the attentionof anyone from RIM, and nobody offered any meaningful solution. As people have reported time and again, it isvery unlikely to be the problem with the battery, so we are left to conclude thatthe phones are lemons.
We spend lots of money for a useless pieceof junk and nobody at RIM cares. If this was a car, it would have been recalled a long time ago. I will get my money back and buy somethingelse, maybe a Nokia or even a Moto. Watch out RIM, you are pissing off a lot ofpeople, and some of them are the wrong people to piss off.

Alien_X wrote:
I did not overlook anything.
I think you did. You pointed out each instance you could find when this fix did not work. You failed to point out the dozens of times this fix did work.
So, to answer your initial post questions:
So, how pervasive is the problem of theBlackberry 8310 and its icon with the red line across from it?
Not very pervasive. It certainly is not one of the top ten problems judging from the questions I see asked here and elsewhere.
Is it a problem with the battery?
Could be. Have you tried a brand new battery (I forget if you said).
Or is it a problemwith the phone?
Again, could be. There could be an issue with your battery contacts on the device.
IS there any fix?
For most, yes. We've been over that.
Try cleaning the contacts on the device. See if that helps. Try a new battery... and often new batteries are very low or close to dead upon purchase so follow the directions above to charge and bootup.
Alien_X wrote:
To: JSanders,
I had already seen this bit of lame “advice” that has been circulating on BB boards and hadtried it several times,
Oh, thank you so much. You know, you get what you give. Your initial post above did not state what you had tried several times. We don't read minds, well, I don't at least.
Alien_X wrote:
Anytime you buy a brand new item and it fails to work after 4 days of trying anything you can find I”d say you got a lemon.
You've had it four days, brand new, and you haven't returned it for a new device? That would be my first suggestion had you stated that first off. I would not keep that device if first off it didn't work. But a lemon? Nah, it's not a pervasive problem inherent to the model, which is what a lemon is normally defined as.
Alien_X wrote:
My name is neither Gambino nor Gotti,
eh, your threats make it seem so, or that you want to be. Has nothing to do with race, just your attitude here.
Alien_X wrote:
To: JSanders,
  offer no meaningful assistance whatsoever, especially for a problem that has been known for at least 10 months.
Four days or ten months?
Alien_X wrote:
Sorry to everyone else, but the personal attack was not warranted and it needed a response.
This is a community support forum. Your post above just reaks of attitude. If you're expecting users here to flock to your post to help out with that kind of attitude and silly threats, well, as you can see, it just didn't happen.
Try being nice and seeking assistance, you might just get a better response. There's been NO personal attacks on you, I don't operate that way.
Alien_X wrote:
To: JSanders,
On Moto, much as you deride it,
I'm afraid that is just indicative of whole problem here, I don't think you are reading these posts. I didn't deride the Motorola. I said you'd love it, unless you consider that derision. How odd that you would. They have great devices.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Problem with RED LINE under text in iDVD 5?

Can anyone help me. When I complete an iDVD project, there is always a RED LINE under the text on the menu. When the DVD is burned and I play it on my DVD player, there will be this annoying RED LINE flashing underneath the text. Does anyone else have this problem? Please let me know if there is a setting that needs to be changed. Thanks!

Tim:
Welcome to the Apple Discussions. Can you include some additional information on your setup, similar to what's in my profile? Also give your HD size and free space, exact version of the system and iDVD, the theme you're using and which text, title or button, that you're having the problem.
OT

Icon with red line through battery.

Please help me!
I have an icon on my blackberry that has a battery with a red line. I bought a new battery and yes, it is the correct battery. Battery works in another phone, but not in mine. I think it is not recognizing the battery. I have tried linking up with Blackberry desktop, but my phone is not turning on because it is not recognizing the battery and therefore has no power source. I have tried everything. I cannot download new software because whenever I hook it up to the computer it says it is waiting for the device to turn on. I have pushed the reset button and tried a soft reset, but nothing.
I would really like my phone to work again, but what I want most are my contacts and a recorded voice note and I am not sure they are backed up.
Sarah

And the issues started after the dropping of the BB? If so, that may void your warranty path...if it's still within the first year, that is. Given what you've described, I don't hold out much hope. Hands-on hardware-level assistance is what I think you need...which we naturally cannot provide here. I suggest you decide if it's worth what you need to go through to get that assistance (warranty or not, voided warranty or not, etc.) and then proceed accordingly.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Red line with Magic Bullet Looks

Magic Bullet Looks in the Video Effects panel shows as a 32 GPU accelerated effect.
However, when I add it to a clip in timeline one, two or three, I go from no lines (including yellow) to a red line above that clip.
If it's a GPU accelerated effect why am I seeing a red line above the clip when I add that effect?
My card is a 285 that works fine with everthing else.

Magic Bullit Looks is not a accelerated effect, so that is why you are seeing the red line.
Effects with the icon on the left are accelerated.

Red line with number 11 beside it

At the top right of my screen of my 8520 I have a red line with the number 11 beside it any ideas what it is?

calspm wrote:
Well at first I got "Set Top box does not match the account settings" message, and then tried to reboot, but then got the "X". So maybe there is an account settings problem.
Click the ATT Uverse Care link in my signature, send the PM, explain your situation.
Include your account #, email address and a good phone # (land or cell) and time to contact you on.
Check the blue PM envelope, upper right on every page, for their reply.
They can reset the error code that is causing your problems. Good luck
Chris
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more

My kid just got an iPod 5th gen (today from Santa) and it won't power up or charge. The only response is when I connect the USB and press the power button or front button the Battery appears with red line and lightning symbol. No other response at all.

Sorry about the long title.....its my first post.
My kid just got a brand new iPod 5th generation (today from Santa) and it won't power up or charge. The only response is when I connect the USB and press the power button or front button the Battery appears with red line on left and lightning symbol below. There is no other response at all no matter what I do, including holding both buttons down for extended period. My other kid got one and it works perfectly.....I have interchanged usb cables ports etc. but still no response....I would really appreciate any help.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Make an appointment at the Genius Bar of an Apple store since you have a hardware problem with the iPod. This is because as you said the same cable works with another iPod.
Apple Retail Store - Genius Bar

When opened, my image appears black with a few red lines at the top, yet the thumbnail looks as it should be. How do I fix this?

I have been working on an illustration in Photoshop for a few months now. When I tried to open it yesterday it came up as a single layered black image with a few red lines at the top. I have no idea what this is. I have not even used red in my artwork. However, no matter how many times open this file, the thumbnail still looks like my artwork, as it should be. How do I fix this? Will I be able to get my artwork back? Please help! Thank you in advance.

Make sure you has the latest Windows Device driver for your display adapted from its manufacturer's web site installed on your system. Perhaps you updated the device driver with a Microsoft Windows Update. Microsoft update does not always install the correct update needed fpr Phoroshop.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Imported AS3 swf animation not looping

I have tried all of the settings in Captivate 5.5 but can't keep my animation looping and not sure why.
I've imported an AS3 swf animation (just a simple movieclip animation of a blinking line) into Captivate 5.5. I placed the animation at the end of the timeline on the slide, and want the blinking line to stay there and continue to blink (i.e., animate) even after the slide has come to the end of the timeline.
I've tried everything I can think of. I assumed that checking the "Loop" setting in Captivate for the animation would do it, but it seems to have no effect.
I am pretty sure what is happening is that the click box on the Cp slide is forcing the animation to pause. In other words, the imported animation's timeline is being forced to pause too. Is there a way to stop this?
Any ideas?

Hi there
Try inserting a Click Box that pauses the slide about half a second before the end of the animation on the Timeline.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Laserjet Pro 200 Color Printing Horizontal Red Lines

When I print in color, I get horizontal red lines across my page. When I print in black and white, it doesn't happen. I've cleaned & calaborated the printer & it's still doing this. Can anyone help?

Hi @kjatc,
I see that you are getting red horizontal lines when printing in color. I would really like to be able to help you resolve this issue today.
I would do a hard reset to see if will help.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
I have provided a document with the steps for calibrating and cleaning the toners, printing a Print Quality page, inspecting the toner for damage, checking the paper and driver settings to see if this will resolve the issue. Some of the steps you have already tried, but please try the other steps listed. Troubleshooting Print Quality Issues.
Print a Diagnostics Page: Go to Setup, Reports Menu, Diagnostics Page.
Update the printer's firmware. Software and Drivers. Select Go under Option 2.
Are you using Genuine HP Toner?
What are the toner levels?
What were the results of the Print Quality Page and Diagnostics Page?
This will help determine if it is just one specific toner, possibly a fuser or hardware issue with the toner. Feel free to include a screen shot of both pages.
If you appreciate my efforts, please click the Thumbs up button below.
Please let me know the results. Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Why can't I see the red line indicating that i typed a word wrongly

i already check the box that says check my spelling as i type but the red line indicating a wrong word doesnt show up.

I see you have the English-GB version of Firefox, that one does not include a dictionary. You can install the British English dictionary from https://addons.mozilla.org/firefox/addon/british-english-dictionary or if you want another version of English, from https://addons.mozilla.org/firefox/language-tools

Simple line extend animations

I am working on a pretty straight-forward motion graphic, that requires lines to extend in various directions via animation. I made one attempt, but feel like my way of doing this – making a small square, then motion tweening it to extend can not be the best way to do this – as I am manually extending each square to make each line, but am running into a lot of alignment / shifts.
Any help, or direction to help would be appreciated. thanks.

One way to do this would be to use a tweening engine like TweenLite - it has an onUpdate feature that will call a function every time the tween is updated... so you can animate some invisible object from point a to point b - and use the graphics api to draw a line to the objects current position. If you have TweenLite give this bit of code a try - it will draw a red line from 0,0 to 550,400 over the course of 5 seconds:
import gs.TweenLite;
var ob:Sprite = new Sprite();
ob.x = 0;
ob.y = 0;
TweenLite.to(ob, 5, {x:550, y:400, onUpdate:drawLine});
function drawLine(){
    graphics.clear();
    graphics.lineStyle(1, 0xFF0000);
    graphics.moveTo(0,0);
    graphics.lineTo(ob.x, ob.y);

Green/Red Line Appears on .mov when exporting

Hi,
There's a green/red line that appears on the RIGHT SIDE when I export my presentation to QT. I'm using H.264 @ 24fps with Multipass encoding at best quality. I'm not including audio or transparency.
The slide size is 355x200.
The contents are vector graphics, images, and videos.
However, no videos are right justified.
I'm using KN 3.0.1 Trial and have QT Pro & Flip4Mac Trial installed.
What are the reasons for this line in the .mov and how do I fix them?
Is it the shadow effect on the actual slide canvas?
I've exported files successfully in the last week since I've had my MacBookPro.

Hi,
There's a green/red line that appears on the RIGHT SIDE when I export my presentation to QT. I'm using H.264 @ 24fps with Multipass encoding at best quality. I'm not including audio or transparency.
The slide size is 355x200.
The contents are vector graphics, images, and videos.
However, no videos are right justified.
I'm using KN 3.0.1 Trial and have QT Pro & Flip4Mac Trial installed.
What are the reasons for this line in the .mov and how do I fix them?
Is it the shadow effect on the actual slide canvas?
I've exported files successfully in the last week since I've had my MacBookPro.

A few seconds after render finishes, the red line re-appears above timeline.

Hello
I am editing a video consisting of still pictures (jpgs) on Premiere Pro CC 2014.
I am using dynamic link with After effects in order to add some animation effects on the still images (sky replacement, puppet, projection etc..)
After doing some work on AE, when I get back to Premiere, a red line appears above the timeline, meaning that I must render that clip (which was just worked on in AE)
Recently the performance while rendering became very slow (rendering inside Premiere by pressing "Enter" on the keyboard)
I just waited several hours for it to finish rendering a part of my clip. It finally finished.
I then played the video and it was running smoothly.
However, after a few seconds, without me doing any changes !!! suddenly the red line above the timeline reappeared.
And now, the video seems to be un-rendered, and it is either not playing or getting stuck all the time.
Does anyone have any idea what could be causing this?
This is extremely frustrating and looks like something is terribly wrong with Premiere.
screenshot is attached.
Thanks,
Tal

I have installed the xf86-video-intel-newest from AUR, but with modified version - 2.13.0. Now mouse pointer works.

Red line swf animation included in Cap 3 Gallery

Similar Messages

Maybe you are looking for