Redlining Software

Hello All,
I wanted to know if any 3rd party redlining tools could be used for markups and redlining features. I know SAP provides some basic features through the EAI/ECL viewer.
Pleas advice.
Thanks!

Bill,
Thanks for the solution. I was trying on the same lines with Adobe Acrobat. Can you please mention here what all components of Adobe is required to make this work? Can it work on the portal (for external customer) and on the sap GUI side (Internal users). Is this a server liscense?
Paddy

Similar Messages

Please Help On TMG2010

I Want Right way to install SurfCop for TMG 2010
if any One Try it please Tell me how it work

Hi,
just do it:
http://www.redline-software.com/ger/products/surfcop/
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

What version of Adobe Reader X should I purchase if I'm looking to have the ability redline, insert and replace copy, highlight, and comment in a PDF? Please advise on the correct version of software to purchase.

I am trying to find the most appropriate and cost effective version of this software to fit the needs of my department. We need to be able to mark/comment on PDF documents and create PDF's. Please advise.
Thanks.

But it can't create PDF files...

Redline and Markups on Portal

Hi All,
I hit a road block on providing a solution where the outside vendors could carry out the redlining and markups on a PDF document published on the portal. DMS is used as the back end and I need to export back the markups files along with the original image. I taught of redlining features of cFolders which opens up in a browser and saves the files on the SAP database which could be latter exported back to DMS.
But I am not sure if the ECL viewer has to be installed at the vendors desktop for redlining in CFolder?
Did any of you hit the same path for any of your business requirement for redlining on PDF documents on portal? What are the third party softwares or development which could be considered in this scenario. Please share!!
Paddy

Hi Parry,
I agree with you. Hope in the next version of ECL Viewer this will be taken care of, as its the requirement of many businesses.
But if you are going to use the SAP DMS on webGUI then it would be easier for you to use the DMS red-lining functionality.
Alternatively till you get the PDF red-lining in cFolders, there is a work-around available.
Try converting your PDF files into tiff files and then you will be able to make red-lining in cFolders.
Regards,
Nishit Jani
Award points for useful information.

Aperture Problems - Redline Badge

Hi, I'm new to this but I do hope there is some kind person out there that can help. My problem has only just occurred due to an aperture update to 3.1.1. I'm running Snow Leopard. My problem is that all my images (even ones I upload now) contain this "redline badge" which means that all my images are now "offline" - which isn't the case although my images are stored on a 10tb Drobo configured so that if any 2 of the 5 discs go down then I can rebuild them from the remaining discs. However I can edit the images and export them - I just have this annoying "red line badge" on every image, so does any out there now how to fix this, I have already carried out "Repair Permissions", "Repair Database" and "Rebuilt Database" none of which have resolved the problem. - Many thanks - David AA

Hi Frank,
My apologies once again for not replying sooner - Happy New Year. To answer your questions.
1- I assume that you can see the Drobo and the files on it with the Finder? Is there any delay when you access it via the Finder? - I can see the Aperture library on my Drobo FS in the Finder, when I try to open the Aperture folder all the images are loaded and seen in the Aperture software.
2- Is the Drobo connected via USB/Firewire or is it networked? In either case is there any kind of power saving settings on it thats spinning down the disks? Also whats the power settings in the Mac? - not sure how to answer this - but the Drobo FS is connected to my Apple 2tb time capsule - esata.
3- Even though there are really not offline what happens if you attempt to reconnect the images? As an experiment try reconnecting one or two images and see what happens. - not tried this - I would welcome some help as to how to do this function.
4- What happens if you make a brand new empty Aperture library and import into it? Try on both the internal and external drives. Is the Drobo the only external drives you have? Can you get your hands on another external for a short while to see if the problem is only with the Drobo? - Again not tried this, but can tell you that I can export aperture "redlined" images and re-import into Aperture and the problem disappears.
Many thanks.
Dave A

Happy Marriage of Hardware / Software?

Hello anyone willing to read,
I do a great deal of print and web publishing design - PhotoShop, InDesign, DreamWeaver, Illustrator, etc, etc. Having abandoned video work several years ago, I am now required to do video again. Having just upgraded to the Laptop detailed below, I have also upgraded to all new software versions of Adobe Design Suite, and Final Cut Suite.
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2.93 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP52.008E.B00
SMC Version (system): 1.42f4
Serial Number (system): W89*
Sudden Motion Sensor:
State: Enabled
When editing Motion Templates with actual media assets - inserting images into drop zones - the editing window absolutely crawls. Also, when inserting transitions into Final Cut I get the dreaded red line and "Unrendered" Screeens all too easily. This is really disappointing.
Is the only realistic and time efficient way of designing even the simplest of video to have something along the lines of the Quad Core Desktop?
On the move a great deal, I opted for the laptop. I need to purchase another editing station for another office. I would welcome any hardware and software insights.
What will it take to make video editing smooth and as close to "on the fly" as possible?
Thank you in advance.
I am spardacus
< Edited by Host >

For now I am just placing images in both Motion and Final Cut. Trying to learn drop zones, transitions, special effects, etc. The images are RGB tiff and jpegs ranging from 300k to 10mg.
I am also always working into an NTSC DV format.
The first redline and "Unrendered" notice I have thus far is when dropping a Motion template into Final Cut with transition to a static background image.
I hope these details help?
Thank you Randy.
Message was edited by: spardacus

My mac's software is only available under my profile on MacBook pro. How can other family members get to the optional SW logged in under their own profile

Is there a way to share purchased SW under mote than one profile on the MacBook pro?
Thanks

If the software is in the HD>Applications folder it's available to everyone. If for some reason you put software into User>Applications folder it will be available only to that user.

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera R

I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help > updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera Raw is only version 7.1. I can not find a direct download for Camera Raw 7.3, only the DNG converter, NOT CAMERA RAW! Please Help!

Did you fix your issue? I am having the same one

Adobe Cloud Which Software does it come with

With Adobe Cloud Which Software or apps does it come with?

All Cloud Applications: http://www.adobe.com/creativecloud/catalog/desktop.html

Step-by-Step Help Needed for Deploying Some Adobe Software

We are a K-12 educational institution. I am currently working at setting up a computer lab with about 16 MacMini computers.
I'm VERY new to the realm of servers, deployment, using terminal, etc.
I've done lots of research to make it to where I am, but just can't wrap my head around what needs done next with the Adobe products.
I am using Server OSX (v3) and DeployStudio (v 1.6.3) to try and manage the computers.
Both my server and clients are running Mavericks 10.9.
I deployed my core images successfully and would like to now send Adobe products only the computers I choose since I have limited licenses.
We have volume licenses of Adobe InDesign CS6 and Photoshop Elements 12 that we would like to deploy.
I have been referencing the following sites, but just can't seem to wrap my head around the EXACT steps that need to be taken.
http://blogs.adobe.com/oobe/2010/10/adobe-provisioning-toolkit-enterprise-edition.html
http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s2.html
http://forums.adobe.com/message/5781663
For Adobe InDesign CS6 - I've done the following:
Created an "Installation Package" using Adobe Application Manager Enterprise Edition (AAMEE v6.2.112.0) using the following instructions.
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Ad obeApplicationManagerEnterpriseEditionDeploymentGuide_v_3_1.pdf
If I log into the client computer, put the package ON the client computer, and run it...it takes me through the install and works wonderfully.It's not automated like I wanted/thought I set it up to do. I have to click through the steps of the installer.
If I try to deploy it using the "Package install" Workflow in DeployStudio...it loads it during the workflow, then skips through it, acts like it installed it, but it isn't actually installed.Is there a setting that I need to possibly change somewhere?
For Adobe Photoshop Elements 12 - I'm a bit lost and mostly just have questions:
I know that I can't use AAMEE and need to use APTEE (Adobe Provisioning Toolkit Enterprise Edition).
How do I deploy the software? Create my own Package using PackageMaker?
Which computer do I run APTEE on? All the instructions I can find just say, "do this" - but don't specify where.
Do I have to open terminal and run the commands on each client computer AFTER installing PE12?
OR
Do I run the commands BEFORE deployment on my package stored on my server that is ready for deployment?
It really comes down to me just not 100% understanding how APTEE works.
I hope that pertrays my dilemma. I've tried to explain best I can. If you have any questions - let me know!
Thanks in advance for any insight you can give!

We are a K-12 educational institution. I am currently working at setting up a computer lab with about 16 MacMini computers.
I'm VERY new to the realm of servers, deployment, using terminal, etc.
I've done lots of research to make it to where I am, but just can't wrap my head around what needs done next with the Adobe products.
I am using Server OSX (v3) and DeployStudio (v 1.6.3) to try and manage the computers.
Both my server and clients are running Mavericks 10.9.
I deployed my core images successfully and would like to now send Adobe products only the computers I choose since I have limited licenses.
We have volume licenses of Adobe InDesign CS6 and Photoshop Elements 12 that we would like to deploy.
I have been referencing the following sites, but just can't seem to wrap my head around the EXACT steps that need to be taken.
http://blogs.adobe.com/oobe/2010/10/adobe-provisioning-toolkit-enterprise-edition.html
http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s2.html
http://forums.adobe.com/message/5781663
For Adobe InDesign CS6 - I've done the following:
Created an "Installation Package" using Adobe Application Manager Enterprise Edition (AAMEE v6.2.112.0) using the following instructions.
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Ad obeApplicationManagerEnterpriseEditionDeploymentGuide_v_3_1.pdf
If I log into the client computer, put the package ON the client computer, and run it...it takes me through the install and works wonderfully.It's not automated like I wanted/thought I set it up to do. I have to click through the steps of the installer.
If I try to deploy it using the "Package install" Workflow in DeployStudio...it loads it during the workflow, then skips through it, acts like it installed it, but it isn't actually installed.Is there a setting that I need to possibly change somewhere?
For Adobe Photoshop Elements 12 - I'm a bit lost and mostly just have questions:
I know that I can't use AAMEE and need to use APTEE (Adobe Provisioning Toolkit Enterprise Edition).
How do I deploy the software? Create my own Package using PackageMaker?
Which computer do I run APTEE on? All the instructions I can find just say, "do this" - but don't specify where.
Do I have to open terminal and run the commands on each client computer AFTER installing PE12?
OR
Do I run the commands BEFORE deployment on my package stored on my server that is ready for deployment?
It really comes down to me just not 100% understanding how APTEE works.
I hope that pertrays my dilemma. I've tried to explain best I can. If you have any questions - let me know!
Thanks in advance for any insight you can give!

How to find licence number to activate software ?

I have just bought the Adobe creative Cloud for enterprise.
I had download the creative cloud and now each software is asking for a licence number but I can't find it.
And I have no acces to Adobe Licensing website to get one.
Can you help me?
Thanks.

Hi Berengere,
Welcome on the Adobe Forums!
There is no serial number needed to activate the Creative Cloud, the Adobe ID will be used to activate the product.
As the product mentioned is Cloud for Enterprise, you have to verify first if your Adobe ID (email address) has been assigned to the user rights.
You will find more information in the following link: http://helpx.adobe.com/creative-cloud/help/manage-creative-cloud-teams-membership.html
If you have already proceeded the the previous steps, please try the steps below then:
1. Clean Up cached user login information
Close the Creative Cloud application.
Navigate to the OOBE folder.
Windows: [System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
Mac OS: /Users/[user name]/Library/Application Support/Adobe/OOBE
Delete the opm.db file.
Launch Creative Cloud.
2. Reset the Hosts file
Windows
Choose Start > Run, type %systemroot% \system32\drivers\etc, and then press Enter.
Right-click the hosts file and select Open. Select Notepad for the application to open the hosts file.
Back up the hosts file: Choose File > Save As, save the file as hosts.backup, and then click OK.
Search the hosts file for entries that reference Adobe (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
Save and close the file.
Mac OS
Log in as an administrator to edit the hosts file in Mac OS.
In a Finder window, choose Go > Go To Folder.Type /etc.
Select the hosts file and open it.
Back up the hosts file: Choose File > Save As, save the file as hosts.backup, and then click OK.
Search the hosts file for entries that reference Adobe (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
Save and close the file.
Please, let us know how it goes.
Thank you.
Arnaud.

Text delete options since software update

I've recently updated the software to 10.3.1.1565 and a new option appeared for text messaging. when i closed a message and went back to the list of text messages the delete symbol appeared next to the text for a few seconds. This was useful. Now, I have somehow (without knowing i've done it) changed the settings and instead of the delete symbol i'm getting the Reply symbol. How do i change it back to the delete symbol?
Thanks.

After upgrading your stock ROM you always need to do a factory data reset, if your phone doesn't do it for you. Then you can simply choose which sounds you want for the notification in the settings. You can download the Swype keyboard, or several various similar to Swype, from the Play Store. I liked Kii and used it for a long time.

Mid-2009 MBP Has Been Hard Freezing, I think it may be the SSD or software?

Please read this fully so you don't end up suggesting something I've already tried.
I have the Mid-2009 version of the 13" MBP that I received in December 2009. Almost two years ago, I upgraded it to8 GB of RAM and a 256 GB SSD. Everything has been running smoothly until about 2 or so weeks ago. My computer has been having hard freezes, meaning, it's not simply an application freezing up; force quit doesn't work, the clock stops ticking, the whole system freezes. It was very predictable too. Whether i was watching youtube videos with flash, reading online articles without it (I have ad block) or doing something completely non-flash or web related, my computer would hard freeze after about an hour or two or so of use, requiring a hard reset (holding the power button until it turned off and then restarting).
I did some research on this and from what I initially found I thought it was problems with the motherboard. However, I found that to be odd because my motherboard was replaced by Apple in September 2012. I read somewhere to try a system hardware diagnostic test (press D upon start up). On the short hardware test, the one that only takes a few minutes, it passed without any problems. Then I tried the longer hardware test, the one that says takes more than an hour. I put that one on and left it alone. I came back every so often and checked on it and it was fine at first. The mouse responded and the test was showing some measurable progress. However I came back, and at 2 hours 11 minutes and 59 seconds into the hardware test, it froze without completing it.
Then I tried doing something everyone says to do when anything happens: I repaired disk permissions. I did that, and according to Disk utility everything went rather swimmingly. However, that didn't fix anything,in fact, it made things slightly worse. Ever since I reset disk permissions, everytime I open Safari, it freezes immediately, and that has only happened since I repaired disk permissions. My home page is about:blank, if anyone was wondering. I've only discovered this happening with Safari as of now. I switched Chrome as my primary web browser for now.
Being the resourceful person I am, I tried to isolate the problem. My sister, luckily, has an identical MBP. First, using target disk on my computer, I booted my SSD onto her computer - this is to see if the problem was HDD/SSD related or motherboard related. When I booted my SSD onto her computer the same problems occurred: Safari froze upon start up, and then computer would hard freeze after about two hours. However, when I booted her HDD onto my computer via target disk, there were no problems. Safari opened just fine and I used her computer for several hours without issue.
At this point, I was pretty sure it was the SSD, but I thought it was possibly a bad Sata cable or something. But nope. Last night, I switched harddrives completely. No target Disk. I put my SSD in her computer and put her HDD in my computer. I got the same results as target disk. It can't be the motherboard or memory, because both computers worked fine with my sisters harddrive. Only the computer booted off of the SSD would have these problems.
At this point I think it could be two possibilities
A) Either the SSD itself is starting to become defective
B) Some software component of my SSD is buggy
I think it could be something software related because why would Safari and safari only freeze after launch, but no other apps? Also something of note, these problems were happening, I tried to see if doing anything with software update would help, updated everything that needed to be updated, and these problems still occurred.
What do you guys think? anyone have an idea of what it could be? Any suggestions of how I handle this? Applecare is expired. I'm considering doing a clean install but I'm not fully backed up yet and I don't want to waste my time and have it not work. But I also don't want to buy a new hard drive or SSD and have it do the same things. And I'm not getting a new computer if the only problem with it is contained within the storage unit, whether that problem is within the software or hardware related.
Responses and suggestions would be highly appreciated, thanks.
EDIT: this information may be of interest: currently have 19.51 GB of available space (out of 256 GB). At one point, about a month and a half or so ago, my storage was as low as 9 or so GB free.
I am running OSX 10.6.8

I have tried making a new user account like you suggested. It fixed the Safari problem; Safari opened and played video just fine. However, the computer still hard freezed after about 2 hours. I am about to back up my computer via time machine after this (hopefully it'll finish before it hard freezes again, I haven't backd up in more than a year). If that doesn't work, I guess I'll have to move folders individually onto an external. I will proceed after backup with a clean install as that is my only other option for now.
However, after a clean install, should I restore directly from time machine? I would think wiping the hard drive and replacing it with what's on time machine wouldn't solve the problem because the inherent corruption is being restored. However, what about just restoring my User folder? What would the process be for getting everything back to normal as quickly as possible? Do you know of any good ways to get my apps and other preferences back to normal ASAP without corrupting anything? Will I have to re-register anything? For example, I have Adobe CS4 that I received from my highschool IT department. I have since graduated, so I don't have the disc or any of the password codes. Would it be risky to restore the application support folder (because that's where the bug may lie)? Or if I just drag just drag apps, would that still work or is the application support necessary too?

Phone not working after the software upgrade

I performed the software upgrade as indicated by the phone in the notifications.
One the phone rebooted, I proceeded to enter my email accounts and it froze on a white screen with a spinning wheel.
I rebooted and it continued to freeze.
I took the battery out, rebooted, still can't add email accounts. It freezes in the setting section. I actually can't change any settings.
If I reply to a text, the screen freezes black.
If I try to reply to an email, the screen says, "Could not display this message"
I have wiped it three times, powered off a billion times and still keeps freezing. The update has been nothing but grief.
Any advice??

Hello 2canoes and welcome to the BlackBerry Support Community Forums.
Sorry to hear you're experiencing issues with your device after updating your software.
It's recommended you contact your mobile service provider for investigation on this matter and to open a support ticket with BlackBerry technical support.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Redlining Software

Similar Messages

Maybe you are looking for