Referencing/embedding a Connect asset (Captivate flv project) in html

How do I reference a Connect address (asset) such as from the Connect server that don't end in an html file using the embed command in html so that the content shows on my web page?
a.    I tried the flash object and movie in dreamweaver CS3 but I couldn’t get it to work.
b.    If I upload the swf files to the same server as the web page I can use the embed command to push the swf files on a web page. I bypass the html page that makes the plugin announce a security warning.
c.    If I do that the FLVs don’t play using Captivate 3 on an http server.
d.    My Captivate projects works when I play the URL from the Connect Server and the FLVs play but I can’t embed them in a web page. Can I see some sample code.

Hi Phil and welcome to our community
The Captivate output files are a bit like a house of cards.
All elements are critical. Here's how they pan out.
You upload all the files to your server. Normally in the same
location.
You point your user to the HTML file.
User clicks the link pointing to the HTML file and it loads
up into the browser.
The HTML file looks for the standard.js file. Assuming it is
found, more code is added to the HTML file.
The MainMovie_skin.SWF is then loaded into the browser
window.
Internally, the MainMovie_skin.SWF knows to look for the
MainMovie.SWF and it loads up.
As each slide pointing to a .FLV is encountered, the .FLV is
loaded at that time and plays.
As for embedding into an existing page, you will need to sift
through the code for the Captivate created HTML file for clues. Are
you using a Web Development tool such as Dreamweaver, FrontPage or
Expression Web designer?
Cheers... Rick

Similar Messages

Embedding connect asset (captivate project) in web page

How do I reference a Connect address (asset) such as from the Connect server that don't end in an html file using the embed command in html so that the content shows on my web page?
a.    I tried the flash object and movie in dreamweaver CS3 but I couldn’t get it to work.
b.    If I upload the swf files to the same server as the web page I can use the embed command to push the swf files on a web page. I bypass the html page that makes the plugin announce a security warning.
c.    If I do that the FLVs don’t play using Captivate 3 on an http server.
d.    My Captivate projects works when I play the URL from the Connect Server and the FLVs play but I can’t embed them in a web page. Can I see some sample code.

Hi Shekhar,
Thank you for your response, this was helpful, however the problem remains as to how the video is seen in the frame. Unless I specify a height for the iframe, (which I don't want to do as it need to be responsive) the height of the captivate project has huge borders, margins which I can't seem to get rid of when it is part of an iframe?
Please find screen capture of what is happening
Kind Regards
Adrian

Adobe Captivate 8 projects published to HTML 5 shows major loading problems and stops

Adobe Captivate 8 projects published to HTML 5 cause major loading problems in most browsers(IE 11, Chrome v. 35.0, Firefox v. 31). Loading… (screen)
The view stops after a while and only the Loading… (icon) can be seen on the page.
Is this a known problem with Captivate projects published to html5 and is there a way to fix it? What is wrong?
Test the html5 version of this project at: http://kurs.dokker.no/captivate/
and see for yourself what happends.

I changed the Preferences/Project/Start and End Preloader % to 25 and published the projects again. The course: http://kurs.dokker.no/captivate/elev/
stopped like before on one of the first slides, loading… screen like before in IE11.
In Chrome v. 37.0 the course worked badly, would not run, sound missing and buttons not working.
In Firefox 31.0 the course worked to a degree even if the program was advising to use another browser for this content.
In Opera 23.0 sound was missing and else working as bad as IE.
All this testes is done on a PC using Windows 8 connected på internet via ethernet, download speed: 66.57.
I would like to use the HTML5-format since it has a cleaner view than swf-files that appear to be jagged, but there is a lot missing before Adobe Captivates html5 publish is where it needs to be. Her are the complete html5 course and here are the swf based course for comparison.

Trouble incorporating Captivate movies into RoboHelp HTML projects

This is for RH 7 HTML.
I have been trying for quite a while now to add some Captivate tutorial-type videos to my help projects. I have recently been able to do this, however, the video additons greatly increased the size of my help file (it went from probably 7 or 8 MB up to 29 MB).
Here's how I added the movies.
Created a new topic just for the multimedia movie
Inserted the video (which was saved as an .SWF - Flash - file, since this is what the help file instructs you to do) and added it to the new topic
Created a link to this new topic in the topic from which I wanted to launch the video and chose to have the video open in a new window
Saved everything and tested it out to make sure the video would run when called
The video runs OK, though it is a little on the large side and is still a bit blurry/fuzzy. I've also had to provide special instructions to any users who wish to view the videos (maximize the RH display window, make sure the resolution on the monitor is set to at least 1024 x 768, choose to allow blocked content if prompted, etc) So, the main questions I have are,
What's the best way to add these videos to a help file without having the file size go through the roof and so they'll still display properly (clear and legible)?
Is there a smaller, more compressed format that can be used that will still allow for a clear display?
Should I embed the videos in the actual help file or place them somewhere else and link to them externally?
I would greatly appreciate any insight, advice, and expertise in this area, since my manager is a huge proponent of having these videos incorporated into the help files.
Thanks very much in advance for any guidance you can provide.
Sincerely,
Dave

Hi Dave
Hopefully Willam won't mind my chiming in here.
When you publish a project from Captivate as SWF, you also have an option to allow Captivate to create an HTML page for you. In fact, the option is typically enabled by default and you have to specifically disable it. At that point Captivate warns you that the movie may not display correctly if you do this.
So if you want the HTML page all set up, you just leave that option selected in Captivate. Then in RoboHelp, you import both the Captivate created HTML page as well as any files such as SWF or FLV you need.
Hopefully this helps... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

What is Adobe Captivate Project [Compatible Mode] vs Adobe Captivate 5 Project?

I have both types of files.
Does a file get the compatible moniker if you've brought it in from Captivate 4? Or even if you copy and paste some assets in from Captivate 4 projects (i.e. buttons, quiz screens, etc)
What does it affect? How can I get rid of this moniker?
Thanks.

I asked an experienced Adobe trainer and he said the [Compatible Mode] does not really affect anything.
We were having issues b/c even though Captivate 5 says it can be published for Flash 9, what they really mean to say is that Captivate 5 can be published to Flash 9.0.28 and above.
We had Flashplayer 9.0.16 so nothing would play. I thought it might have something to do with the files being [Compatible Mode], but that was not the issue.
We are upgrading now to Flashplayer 10.

HT200183 If I wanted to include apple loops in the assets of Logic project folders that are part of a tutorial available for download on a paid educational website would that be ok?

If I wanted to include apple loops in the assets of Logic project folders that are part of a song that follows a tutorial available for download on a paid educational website would that be ok? No one would be paying for the file itself that's part of the membership. I don't want to get into any copyright problems. I understand that they are royalty free and you can include them in your music no problem but the individual loops would be in the audio folder if I saved all the assets to the project file.
Also, would it be ok to include screen shots I take myself of apple programs in my downloadable content?
Just trying to figure out exactly how I should go about it to avoid any legal issues.

Hi
trainedmind wrote:
No one would be paying for the file itself that's part of the membership. I don't want to get into any copyright problems.
My gut reaction is that you may well run into © issues if you re-distribute the original AppleLoops.If your customers are paying for the training, they are also paying for the content you provide, so I feel that you would be re-selling the loops.
Given that anyone who has a copy of Logic would likely have installed all the loop content, there should be no need to distribute them with the project files. Alternatively, make your own loops.
CCT

Can I use more than one database connections in a jdeveloper project?

I use jdeveloper version 9.0.4.0 (build 1407),Can I use more than one database connections in one jdeveloper project?

9.0.4 is a fairly old version, so you may only find a few people who know how it worked.
Assuming you're using ADF BC, once known as BC4J, once know as JBO, in the project, and that the architecture hasn't changed much, then the answer is only 1 connection per project.
Programmatically you're free to use as many connections via JEE as you see fit, but ADF BC is limited to one connection.
CM.

How to add a Captivate 5 Project into RH for Word?

I have to add a captivate simulation project into my Help project, and was wondering if anyone knows if it is possible. I searched Captivate's help, and they say you can with RH HTML, but I am currently using:
1. RH for Word Build 8.0.0.203
2. Captivate 5.0.0.596
The Help project is a Single Source Layout with WinHelp 2000 primary layout. Any ideas?
eangel

Hi Rick,
I did test the url from my browser's address bar, and it worked fine. I cannot get this to work from the help project.
Hope someone can help.
Thanks,
eangel

Automatic Asset creation through Project settlement

Dear All,
We have one issues where in AS02 AUC Asset quantity is in display mode still we can find the quantity there.
Can any body help me about the Process of Auto Asset creation through Project settlement.
I need to know how system calculate the Quantity from the Project settlement. if such type of Process exist in SAP
Thanks
Abhijeet
Edited by: Abhijeet Patil on Oct 5, 2011 3:05 PM
Edited by: Abhijeet Patil on Oct 5, 2011 3:05 PM

Hi,
There is process in SAP where we can create AuC from Projects. We need to have an investement profile set up and the same needs to be used in the project. You will have the details in SAP Help documnetation for this.
Regards
Sreekanth

Can Captivate 4 project files be opened in Captivate 5?

I was wondering if captivate 4 project files can be opened in captivate 5? I know captivate 2 project files cannot.
Thanks guys,
Kya.

Hello and welcome on the forum (see it is your first posting),
Normally there are no issues when opening CP4-files in CP5: they will be converted, including the advanced actions (if there are) and to AS3 if the CP4 was AS2 because CP5 only supports AS2. I only had some few issues with those convertions.
Beware: you will not be able to open the converted file in CP4 anymore. As always, be careful to keep the original files stored safely somewhere.
Lilybiri

Why can't I open a Captivate 8 project in Captivate 7?

I really need to be able to open up a Captivate 8 project back into Captivate 7. I had no idea that once I installed Captivate 8 it would change all of my files. Is there any way i can do this without corrupting my projects?Adobe Captivate

Sorry, apparently you are pretty new to Captivate, because it has never been possible to open a project in a previous version. There was one small exception (7 in 6) but with a lot of issues.
When you open a CP7 file in CP8, it will not be automatically converted to the 8 format, unless you save it. And then you get a warning dialog. For CP7 - files that never were opened in CP8: open first CP7, then open the file. Don't just double-click on a filename, maybe the cptx-extension is now automatically linked with the latest version which is CP8. Good practice is never to open a file by double-clicking it, and this is certainly true for Captivate, where to have all functionality you need to open the application to be run as administrator.

Creating Asset Lines from Projects

Hi All,
We have transactions recorded in Projects module which need to be sent to assets module for creation of assets
However, the problem here is that they need to create many asset lines from one transaction (400-500 asset lines)
Users have been manually completing information required to create asset lines from projects module and running the program to transfer to assets module
In this case there are too many lines to create manually,
Is there any workaround to this issue?
Can the lines be transferred to assets module and then split on the prepare mass additions form? If so, can you please let me know the details, to transfer the line as a "multi-unit" line so it can be split on the mass additions form
Thanks!

I was thinking just that conroy, attached is a crop of the type of the black and white scan I'm working with, this was originally a trace, it is a very large document this is just one part of it.
Thanks Noel I did mess around with your suggestions, not sure I achieved what I was after, it was either too strong removing everything or too weak.
What I'm trying to do is get rid of the speckle (despeckle filter cleans it a little) and just have all the lines nicely redrawn and crisp. I've so far being doing it manually but it is 1) inaccurate and 2) taking me a very long time.

Captivate 5 Won't Open Captivate 3 Projects

I'm using the trial version of Captivate 5 and am trying to open some Captivate 3 projects. The message tells me to ensure that the file isn't already open or damaged and that I have sufficient disk space and resourses. I had previously opened the same file on Version 4 without a problem on the same computer, it isn't read-only and there are no resource issues (I'm able to open the version 4 files without a problem). I need to open the version 3 files and using Captivate 4 isn't an option.
Any ideas? Thanks

Danny,
There is no direct upgrade route from Cp3 to Cp5. You have to first upgrade the Cp3 file to Cp4 and then go to Cp5. Two steps.
Your trial version Cp4 would have had no problem opening Cp3 files and saving them as Cp4. But a Cp5 trial will only open either Cp4 (to upgrade) or Cp5 files.
ActionScript is the Flash programming language. Cp3 and Cp4 would accept files with ActionScript 2 code. Cp4 would accept both AS2 and AS3. But Cp5 will only accept AS3. It doesn't support AS2 at all.
So if your Cp3 projects contained any Flash animations that were published to AS2 SWF format, you would find that they would not work as expected if you upgraded your projects all the way to Cp5. You would need to have the source FLA files for those components and either recode them into AS3 or republish as AS3 for Flash player 9 and 10 before reinserting into your project.
If you're only talking about a few files requiring conversion to Cp5, I'm happy to do them for you. I have Cp3, Cp4, and Cp5. Just contact me via the contact form on my website: www.infosemantics.com.au so that we can take this offline via normal email channels. If your files are smaller than 5 meg each (zipped) you'll be able to email them to me. If they're too large for email, you'll need to post them up to a web server for me to download, or else use a file upload service such as http://www.sendthisfile.com/
Regards,
Rod

Buttons not working on published SWF Captivate 2 project

I have published a daisychained Captivate 2 project in three
pieces, all published as SWF. The first piece plays fine, but a
user has to push a button to choose to either go to the second
piece OR the third piece. The button was designed so that when
pressed, it would open another CP project. The buttons in the
published pieces make the clicking sound, but otherwise do nothing.
When I published this as an EXE project with three pieces, the
buttons did what they were supposed to do. I'd prefer to use SWF
published output instead of EXEs. Any ideas as to what might be
happening to prohibit the buttons from performing?
Thanks,
Andrew

Welcome to our community
If you are emailing the Captivate published file, likely the end user is running it from a temporary folder from their C drive. And that causes a security issue with Flash.
If you insist on using the eMail method of distribution, you need to also instruct the user to save the attached files to a specific location, launch the HTML file. Then ensure they configure their Flash player security settings to acknowledge the location where they saved the files as being safe.
Click here for more
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Converting mp3 audio to txt for Captivate 4 project

Hi,
I'm working on a Captivate 4 project for which audio was recorded as an mp3 file. The audio consists of talking points for a training session. Instead of editing and splicing this large file, I was hoping to convert it to a txt file, that I could then add as slide notes and use the text-to-speech converter in Captivate 4. Does anyone know of a tool that converts mp3 files into txt files?
Thanks.

Hi there
I believe Adobe Soundbooth has that capability. You might also look at Dragon Naturally Speaking as well. I'm unaware of any free tools that will do it.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Referencing/embedding a Connect asset (Captivate flv project) in html

Similar Messages

Maybe you are looking for