Reflection Template

In Motion I made a reflection using drop zones. When I use the template in FCP and add video, it shows up in the top part but not in the reflection. Is this even possible to do?

I can't post it, our computers at work aren't hooked to the internet yet.
I haven't tried to open the template in motion. When I made the template in motion the drop zone had the reflection so it worked there it's just when I saved it as a template, opened the template in FCP that the reflection wouldn't work. The reflection of the drop zone is there in FCP but not when I add the video.
It did almost work today but the reflection was way toward the bottom of the screen.
I forgot to try to add an effect to the motion template after adding video. I'm sure that will work.

Similar Messages

Editing slideshow reflections template in Aperture

Hi. I'm trying to put an image+music slideshow together in Aperture for playback on TV. I quite like the reflections theme in Aperture 3 but does anyone know if it's possible to modify the default setting so that each slide shows just one picture? Currently the default appears to show multiple pictures on each slide.
Any thoughts would be much appreciated.
Many thanks in advance.

The short answer is you can't.
A few times when I needed to do this I skipped adding music in Aperture and just exported the slideshow out of Aperture with no sound. I then imported it into Garageband and added the music there. You can save the finished movie out of Garageband with the newly added audio without re-compressing the video.
Changing themes is going to require another video editor to piece it together. Create separate slideshows in Aperture with the different themes and reassemble them in something like Quicktime Pro. Then open it with Garageband to add the audio.
Seems like too much effort to continue to use Aperture for the slideshow. Might as well use iMovie from the beginning.

Can multiple roles be assigned to users of the same PC?

Hi,
I'm using Contribute 3, and am set up as the administrator of a web site.
I've created a new role for other users, and want to test the new role and its related permissions.
But when I open the connection key attachment on my PC, it automatically picks up the administrator role when Contribute opens.
Does anybody know whether it's possible to have multiple Contribute roles in use for the same web site, on the same PC, preferably password protected?
Thanks in anticipation,
Andrew

That makes sense, thanks Krishna.
Do you mind if I ask another question?
I've provided Contribute users with the facility to create new pages
based on a standard Dreamweaver template.
In the future, if the template changes, I'll download the user-created
pages from the server, but is it possible to automatically reflect
template changes in these pages - as with the automatic update
indicator available when creating template-based pages in Dreamweaver.
Thanks again,
Andrew
Quoting Krishna Prasad B V <[email protected]>:
Hi Andrew,
If users have different user accounts in the same machine,
then, this
would work fine. So, you can log out of the machine, log in as
another user, and
launch Contribute and create connection to a website as a different role. The
other users in the same machine who are using Contribute will not be
affected by
this.
>

Movie importing problem

1. I have chosen the "Reflection" theme template.
2. I have used the edit drop zone feature and imported jpgs for the motion slides that move from right to left.
3. I have dragged a .mov from my desktop and placed it in the area of the translucent pane in the template, a yellow dot and a box with the file name appearred.
4. When I tried to adjust the location of the movie on the pane and edit its name by selecting it the template name box to the right "Reflection Main" is highlighted and moves as if it was selected, while my mouse is still on the movie name.
I have tried going to the edit menu and selected "select none" and it does de-select the Reflection Main box but the process repeats itself when I have tried again.
Also when I review the project and try to start the movie by clicking on the file name - it is not selectable - nothing happens.
I am tring to make a DVD that will auto start to the slide show of the reflection template and when one clicks on the movie name it will then play the movie.
Please help,
jim

is the rest of my system adequite enough?
Not really... This is what Apple stated when iLife '06 was released a year ago:
iLife '06 System Requirements
• Macintosh computer with a PowerPC G4, PowerPC G5, or Intel Core processor; 733MHz or faster for iDVD
• 256MB of RAM, 512MB recommended
• Mac OS X v10.3.9 or v10.4.3 or later; v10.4.4 recommended
• iTunes 6.0.2 and QuickTime 7.0.4 (included)
• DVD drive for installation
• 10GB of available disk space
• High-definition video requires 1GHz G4 or faster and 512MB of RAM.
• Burning DVDs requires an Apple SuperDrive or compatible third-party DVD burner.
• iPhoto print services are available in the U.S., Canada, Japan, and select European countries; requires Internet access; fees and terms apply.
• .Mac account required for iPhoto Photocast publishing and recommended for iWeb. The .Mac service is available to persons age 13 and older. Annual membership fee and Internet access required. Terms and conditions apply.
• iWeb requires Internet and webserver access (.Mac recommended). The .Mac service is available to persons age 13 and older. Annual membership fee and Internet access required. Terms and conditions apply.
• Mac OS X v10.4.4 required for iMovie HD themes, iDVD themes, iPhoto Photocast publishing, and iChat recording in GarageBand. iChat video conferencing requires broadband Internet connection; fees may apply.

Buttons on chapter pages won't "select" in proper sequential order

I am exporting a multi-chapter movie from iMovie 6.0.3 to iDVD 6.0.4. When previewing with DVD Player to see how the finished movie would function when viewed on TV, I find that it's impossible to advance through more than 3 scene buttons on any chapter page in sequential order - no matter which "theme" I select for the movie. On the Reflection template, the chapter and page forward/back buttons select in a seemingly random sequence.
The movie map page shows all chapters in proper order, so there are no clues there to the malfunction in navigating between chapter buttons. Does anyone have a solution/ workaround to this problem?

Thanks for your helpful suggestions. I was thinking along the same lines - so I played around with re-sending the project to iDVD, moving between themes, and doing a series of edits in my chosen theme to see the results of consciously working with the chapter menus in different ways.
Surprisingly, I got the best result (a predictable and orderly, though not sequential, movement through all six chapters on a menu page) when I selected the "free position" option to release the buttons from snapping to grid, and then shifted the buttons slightly to align their edges in a particular relationship to each other (arriving at this finding was pure serendipity).
In some cases the original chapter title was long enough to overlap another button, but this did not seem to cause the random movement between buttons, as short titled-buttons seemed just as likely to be affected, whether or not they followed a long-titled button. But it seems possible that the presence of any long-titled button on a page could somehow affect the behavior of the entire page, or that there is something related to the titles that triggers or contributes to the problem (ie, even text that looks short enough may exceed some parameter) so I think this is worth keeping in mind.
Once the chapter button is selected (no matter how arduous it is to get there) it always plays the right clip. And "play all" plays the entire movie in correct sequence. So this quirk seems to be related to the specific code which determines how chapters queue for selection on the menu page.

Name of "ornamental" style?

Hi,
I have recently fallen in love with a graphical style, which name i dont know and cant figure out.
I figured that the adobe forums are the best place to get an answer!
I attached picture of a recent discovery in GQ's October 2009 issue with Olivia Wilde (the black and red "ornaments" around "Olivia").
Another place to get an idea of what i am talking about is at www.mika78.com
I have no idea how to describe it. Dingbat? Ornaments? It looks french to me.
If someone knows what it is called, please let me know, because I would like to learn how to make it in illustrator.
Tutorials, anyone?!
Thanks a ton!

Mario,
I don't know that the style has a name, but it is definitely an ornamental style. Maybe you would be interested in looking into Guilloché patterns too for the borders.
http://jerrydmills.deviantart.com/art/Guilloche-Pattern-Brushes-121706004
http://illustratorworld.com/forum/viewtopic.php?t=1846
Also a good template for creating symetrical shapes live: http://blog.choppingblock.com/2009/03/illustrator-cs3-cs4-reflection-templates/
Definitely if you combine Go Media's tutorial that PrepressPro1 suggested with some of what I linked to you could create very cool stuff.
And also, yes, you could find elements to play with if you search for ornamental dingbats and vectors.

I modified the budget categories on the numbers template so now the transaction tab does not communicate with the budget tab. I figured out how to change the drop down options but how do I get it to reflect on my budget sheet? Please help.

If you are familar with the Numbers Budget Template it has two tabs 'Budget' and 'Transactions'. If you use the template as it is designed when you input expenses on the transaction tab it will automatically add that amount into the selected category on the budget tab. I have madified my budget tab to reflect the caegories that I need, which included adding several to the template. I also added to the table so it reflects my income and expenses so I can track where I am at with a glance. Since I did this, I can't get my transactions tab to communicate with the budget tab. I figured out how to change the options in the drop down box for category but I con't figure out how to get it to reflect onto my budget tab. I'm sure that it is an easy fix, however, I am just not well versed in Numbers. I appreciate your time in helping me with this issue.
Respectfully,
Jon

My guess is that while you added catetories to your Budget Sheet by adding new lines and filling in the category column, you didn't also add the formulas to these new budget lines.
The proper way to add those lines would have been to select a cell in the line just above where you want to add a line and type Option/Alt-DownArrow. This would have copied the formulas into the new line. Maybe you did this, and maybe not. You didn't give details on how you added the lines.
Select C2 and D2 and Command-C to copy them to the Clipboard.
Select all the cells of Columns C and D except for the top and bottom rows and Command-V to Paste.
If I have properly guessed the problem, you should be in business. This assumes that your Categories are exaclty the same as the entries in your Pop-up menus. Spelling counts, as does case.
Jerry

Changes in .RDF not reflected in template

Hi,
I am wondering if anyone else has had this issue. I made a change for a function in my .RDF file and moved it to our reports directory. The change is not reflected in the BI Publisher output. Is there something else I need to do to get the template to pick up the change as well. The problem seems to be that the XML output does not change and seems to only be running the old file. Is there somewhere else I need to move the file to or does anything have to be bounced to make changes effective? Any help is greatly appreciated.

Hi Jason,
Check if there is a Load balancer in use...
If the address you give to users to access EBS (http://erp.company.com:8001/) looks different from the server you upload the files onto (e.g. server1.company.com), you have good reason to suspect may be a Load balancer in use. Load balancing in EBS context means e.g. that the work load is automatically balanced between two or more application servers. In this case you would need to upload the updated file to every server used (server1.company.com, server2.company.com, etc).
The load balancer gives assignments to the application servers according to some internal logic. You can query fnd_concurrent_requests to see which AS was assigned to carry out each request. If you have an obsolete version of the report on one AS, and new one on the other AS, whichever could be picked. Actually you may have the old one picked dozen times in a row. This could explain why the updates are not reflected when you run the concurrent program.
Best Regards, Matilda Smeds

Changes to HTML template not reflected in production

Hi All,
I am facing the following issue.
I have changed an already existing screen(HTML template) and published the service. It is working fine in development environment. This is now transported to production environment and the screen change is not reflected here. We have tried refresing the ITS buffer, but hasnt worked. Any pointers would be of great help.
Thanks,
Shruti

Hi Shruti,
did you check the changed template in the productive environment? Did the transport successfully reached the new system?
If the changed template is available please (re)publish the file on the new environment.
Regards,
Sabine

Template not reflecting the change.

Hi All,
I am working on Adobe output Designer5.5 version. I am now trying to modify an existing template. The changes done to the template design are not getting reflected in the printed output. Also additional lines which are not visible on the template design are printed on the output.
Can someone please suggest on the a solution for this.
Thanks and Regards,
Benila Sophy.

Sometimes if you have objects (fields or lines for example) that get into the "unprintable" area of the form you can get really wierd results depending on the printer. If you are using subforms, be sure that -aapoff is set. If you like, send me your ifd and a sample data file and I would be happy to have a look at it.
[email protected]

Reflection of a customised BAdi in the appraisal Template

Hi All..
I have created a Customised BAdi from an existing BAdi..i have also included this BAdi in Enhancement Area using the transaction oohap_basic.But when i go back to appraisal template and try to insert this BAdi in a column it diesnt reflect their..so please can anybody help me out with a solution

Hi Andy,
Thanks for the reply. I have managed to recall what I have done long before and here are further details.
Go to the transaction PHAP_CATALOG
Select the drop-down menu "Go-To"
Choose Enhancements
HRHAP00_ENHANCE_DEL1 - Delete Element Only 'In Planning'
HRHAP00_ENHANCE_DEL2 - Delete Element Only 'In Planning' or 'In Review'
HRHAP00_ENHANCE_DEL3 - Delete Element 'In Planning', 'In Review', 'In Process'
Best
Veera.

Data type change made to schema.xml of comments list which is part of blog site template is not reflecting in the existing site but working fine when new site is created.

Hi,
I have created a blog site with the available site template few days back. Now we have the requirement of having the attachments in the body of the comments section.
So, I updated the schema.xml of the comments list available under ../templates/blog/lists/comments/schema.xml to have rich text for the Body field.
With this change, I created a new site and it was working fine. Change is reflected in the new blog site.
However, this particular change is not reflected in the existing blog site. Any changes made to the schema.xml is not effecting the old blog site.
Can anyone suggest what can be done for the change to be reflected in the old blog site?
Thanks in Advance,
Regards, Keerthi Suryadevara

Hi,
According to your post, my understanding is that you wanted to add attachments in the body of the comments section.
You can add the the Code inside the Default list pages. For more information, you can refer to:
Enable Attachment in SharePoint Blog post list and display the list Attachments
In addition, you can add an enhanced rich text field to the comment list and remove the body field. Then you can insert files into comments, too.
Here is a similar thread for your reference:
http://sharepoint.stackexchange.com/questions/77194/how-to-add-attachments-for-comments-list-in-sharepoint-blog-2010
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Template Chooser titles covered by template reflection

I am a new Mac user and recently purchased Pages. Upon opening the app, the template chooser opens up. In the videos, you can clearly see the titles of each template in a white font with a faint reflection of the template behind. What I see is a big block of white covering the white template names, so I can't read the names at all. Does anyone know the best way to fix this? Maybe just uninstall and reinstall? Thanks in advance!

Meg,
What I see here is this:
Can you post a screen shot of what you have there? We might be able to tell what is going on.
Jerry

Template properties not reflecting in some iviews based on that template

Hi ,
I have a template which is based on a PAR .I have some drop down in this template which has three values .Now there are around 40 iviews which are based on this template in these iviews i get only 2 values in the drop down .Also in PAR i have removed a iview property from portalapps.xml which is removed from template also but iviews based on that template the property is still there .I have cleared the cache .
Could someone please tell me why how do i resolve this problem its Urgent
Regards
Varsha

Hi ,
I have a template which is based on a PAR .I have some drop down in this template which has three values .Now there are around 40 iviews which are based on this template in these iviews i get only 2 values in the drop down .Also in PAR i have removed a iview property from portalapps.xml which is removed from template also but iviews based on that template the property is still there .I have cleared the cache .
Could someone please tell me why how do i resolve this problem its Urgent
Regards
Varsha

Template reference not getting reflected after Creating WSP file of SubSite in SharePoint Online ( Office 365)

Hi all,
I am following below Steps:
Going to Library Setting.
After Click on Some Custom Content Types in content Type section.
Click on
Document
Set settings in Settings.
Brows and Upload Document Template in “Default Content” Section.
Click OK.
After Uploading Default Template I want these uploade template in my newly created Sub site (After saving Site as Template) which is created with wsp.
When i create new subsite i am not getting Default Content which have brwsed and Uploaded in Contenten Types.
Please Give some idea regarding below Screen Shot.
Thanks In Advance. Your help will be heighly appreciable.
For example i have given Document Link from any Library/List but not getting that link in new subsite which was created with wsp.
Thanks In Advance. Your help will be heighly appreciable.
Thanks,
Vivek Pandey

Hi Christoph,
From the article you mentioned, it needs add JPG file type to Search Service Application, which was not supported for SharePoint online.
I tried to add Picture content type to normal document library and tested the issue, it still displayed as item in Search results.
However, if I created a Picture Library and add Document content type to it, both image and document can be previewed in search result.
Regards,
Rebecca Tu
TechNet Community Support

Reflection Template

Similar Messages

Maybe you are looking for