Refrence file error in exe

Hey there.... thanks for Helping me so far..
I am stucked at a point again... I am making a application for report generation.
Using HTML report generation... But as I want to append my report to previous What i do is open that report as word type...
Now.. VI is working fine... but as I make an EXE it gives error about reference fie...(word_quit.vi)
" file <path> is not found or file not found" like that and path in that error only points to the location i buid exe.
I couldn't find the word_quit.vi anywhere.. and Main VI is working fine.... BUT as i build exe it won't work..
Can anybody help .. ?

Hi Cyborg,
I believe this knowledgebase article addresses this issue. Let us know how it goes!
Best regards,
-Sam F, DAQ Marketing Manager
Learn about measuring temperature
Learn how to take voltage measurements
Learn how to measure current

Similar Messages

Error running exe to write to exel file: Error 7 New file not found

Hello!I have this problem, i've looked everywhere and i still can't solve it. It would be great if anyone can help me.
I built an application that writes an array to a spreadsheet file.
Everything works fine in Labview 7.1 , i can build the exe file, but
when i try to run it it doesn't work (it doesn't do anything although
in Labview works perfecty well)and i have this error:
<<Error 7 occurred at New File; Possible reason(s):
LabVIEW: File not found. The file might have been moved or
deleted, or the file path might be incorrectly formatted for the
operating system. For example, use \ as path separators on Windows, :
on Mac OS, and / on UNIX.>>
I've attached the vi file and the exe file.
Thank you
Attachments:
app.zip ‏167 KB

You've made a very, very common mistake and one discussed in numerous postings. When running in development mode and using the Current VI's Path, the path to a VI would be something like c:\folder\example.vi. When built, it becomes c:\folder\app.exe\example.vi. An extra strip path is required. Look at this, this, and this.

I keep getting the following message: Runtime Error...Microsoft Visual C + Runtime Library Program C:\Program Files\iTunes\iTunes.exe R6034 An application has made an attempt to load the C runtime library incorrectly and can't open iTunes now. Help!!

I keep getting the following message:
Runtime Error...Microsoft Visual C++ Runtime Library Program C:\Program Files\iTunes\iTunes.exe
R6034 An application has made an attempt to load the C runtime library incorrectly and can't open iTunes now.
Please could someone help with this query as I am at a loss as to why this problem is now occurring? Thank you.

Check the user tip below.
https://discussions.apple.com/docs/DOC-6562

I am trying to re load itunes onto a Compaq (Windows Vista) laptop. I keep getting an error message "Runtime error! Program: C\Program files|itunes|itunes.exe. R6034. An application has made an attempt to load the C runtime library inccorectly." Help!

I am trying to re load itunes on to a Compaq (Windows Vista) laptop. I keep getting an error message "Run time error!. Program C:\Program files\itunes\itunes.exe. R6034. An application has made an attempt to load the C runtime library incorrectly" What can I do?

Hello, Max230506.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through as they should resolve the issue.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H.

I get this error message when trying to start Itunes - "Runtime Error! Program: C:\Program Files\iTunes\iTunes.exe R6034 Anapplication has made an attempt to load the C runtime library incorrectly. I have tried to have iTunes re-install and correct.

I get this message when I try to start iTunes
Runtime Error!
Program: C:\Program Files\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime Library incorrectly.
I have tried to have iTunes re-install but still get the error.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Get these two error messages when I run the iTunes exe file: Error 2 and Error 2 (Windows error 2). Both say Apple Application Support is required. Uninstalled and tried to install again several times. Using Windows 7 64 bit on laptop.

Trying to install iTunes on my Dell laptop with Windows 7 - 64 bit. Get these two error messages when I run the iTunes exe file: Error 2 and Error 2 (Windows error 2). Both say Apple Application Support was not found. Can anyone tell me why this is happening?

See Troubleshooting issues with iTunes for Windows updates.
tt2

Hi, download of the trial product (photoshop ele 13) does nt start even after successfully installing the Adobe download assistant successfully. Only .7z file is shown, .exe is nt available. Whn i try to extract .7z file wd 7-Zip error pops up " cannot ex

Hi, download of the trial product (photoshop ele 13) does nt start even after successfully installing the Adobe download assistant successfully. Only .7z file is shown, .exe file is nt visible. Whn i try to extract .7z file wd 7-Zip error pops up " cannot extract **.7z as archive" .I've tried fresh download of adobe photoshop ele 13 but same error occurs.
OS:Windows 8.1
Storage loc for adobe down assistant : C-Program file(x86)-Adobe download assistant-adobe
Storage loc for adobe down assistant: C- Adobe photoshop assistant 13- PhotoshopElements_13_LS25_win64_1. 7z
After this I try to extract ** .7z file but following error occurs :
After this I try to extract ** .7z file but following error occurs
Kindly Help.

Thanks fr revert !
After clicking on the provided link , Above error pops up. I clicked "ok" n allowed download to complete after which same previous error shows up!

Runtime error R6034 c:\program files\itunes\itunes.exe.

On january 25, 2014 I installed new version of itunes 11.1.4 and error occured: itunes was not installed correctly. Please reintall itunes. Error 7 (windows error) 1114.
Runtime Error: program c:\files\itunes\itunes.exe. R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the applications support team for more information.
I continue to get this errors and to reinstall itunes. I do not know if the cause is microsoft visual C++ or itunes installation has a bug that caused the problem.
Anyone know how to fix this problem. Cannot download lates version of Itunes.
Thanks

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99261)

Runtime error Program c:\Program files (x86) iTunes.exe

Buenas noches:
Conecto el Ipad 4 a mi PC con Windows 7 64 bits y se abre el iTunes para comenzar a actualizar datos, libros música, etc. Todo iba perfectamente. Cargo unos libros formato .epub y todo bien. Hago clic en la pestaña PDF para cargar unos archivos que debo tener en el Ipad y unos libros que me interesan en ese formato. Cuando selecciono esos archivos PDF para agregarlos a la biblioteca me da el siguiente error.
Runtime error Program:
c:\Program files (x86) iTunes.exe
This application has requested the runtime to terminate it in an unusual way.
Please contact the application's support team for more information
Error de ejecución
Traducido porque no sé nada de inglés dice mas o menso esto:
Programa: C: \ Archivos de programa (x86) iTunes.exe
Esta aplicación ha solicitado el tiempo de ejecución de darlo por terminado de una manera inusual.
Póngase en contacto con el equipo de soporte de la aplicación para obtener más información
Desinstalo iTunes (6bits) y lo bajo de nuevo desde la página de Apple. Lo instalo de nuevo, pero sigue dándome el mismo error.
¿Por qué ocurre esto? ¿Cómo soluciono ese error?
Gracias

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or by right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

PST is not an Outlook data file error coming while opening the Outlook

Hi,
Suddenly my outlook is showing the .pst file is not an Outlook data file error while starting. No big changes was made to the system to cause this. I had upgraded the IE version to 9 the same day. Done lots of trouble shooting but still not able fix my pst
file to work. My all mails are in that pst and there is no backup for it.
I am using Office Outlook 2007. I have already tried the following to make it work bu failed each time.
1. Tried to repair the .pst file using scanpst tool in the system, but closed due to an unexpected error at the Phase 6.
2. Successfully completed the repair using the scanpst of another Outlook 2010 system and added the pst back to my systems Outlook but it had only an Inbox folder in it which was empty.
3. Tried to repair the using other third party software's but none came successful.
Please let me know anything can be done for to make my old pst work again.
Sanjay
Avatar of Sanjay Oyitty Sanjay Oyitty

Hi,
What's the size of that .pst file?
Right click on the file and click Properties, make sure there's no
Read-only Attribute. Then we can run Scanpst.exe again to check the result again:
http://support.microsoft.com/kb/272227
Regards,
Melon Chen
TechNet Community Support

Error: OUI.exe Stopped Working 11g R2 32-bit Client on Win 7 64-bit

I am receiving an error "oui.exe stopped working" when running setup.exe to install Oracle 11g R2 (win32_11gR2_client.zip for Win 32-bit) client on Windows 7 Enterprise 64-bit. I never even get as far as the Oracle installation dialog box. I am trying to install 11g R2 32-bit because it is my understanding the 64-bit version of Oracle client is not compatible with Toad for Oracle.
I have read numerous posts on the subject and have tried just about everything I can think of to get around the error. When I run the setup.exe -debug I can see that teh files are unzipped and the installer seems to fail when it hit the section where it tries executing java.exe. Once the dialog box appears with the error message, I am not able to get back to the command window to extract the debug results. I can only see it partially in the background behind the dialog box. When I hit cancel to close the error dialog, the debug window also closes, so no way to get the details of the debug results
I am logged into Win 7 as a member of the Adminstrators group and have verified that the Windows User Access Control (UAC) is turned off. I get the erorr message whether I run as Administrator or not. I have unzipped all the files and folders under the \client directory from the zip file to a folder c:\temp\. So the setup.exe and all folders below it are in the c:\temp directory. I did this because one post suggested an issue with long path names or path names with spaces when executing setup.exe.
Seems like it should not be this difficult. I never had issues in the past installing Oracle client on Windows XP Pro. This is my first attempt at installing under Win 7.
Any help or direction would be much appreciated.
Edited by: user10421280 on Nov 21, 2011 1:27 PM

orafad and PavanG,
First let me thank you both for your multiple attempts to help me. I finally figured out what was causing the issue with the Oracle Installer, oui.exe not running properly. Last night I was looking around into the Windows Event Viewer and found an Error entry for oui.exe that pointed to a program directory and .dll in the \\program files\appsense\ directory path. It seems that in addition to the McAfee virus scan, host intrusion, unwanted programs, group policy manager, etc., there is another application installed on the machine that governs what programs can and cannot run. I don't know much about it other than when the program was temporarily suspended, the setup.exe and oui.exe install kicked off fine without the "oui.exe stopped working" error message. It proceeded happily to the Oracle Client installation dialog. All along our IT desktop support was trying to help me with the install and they repeatedly disabled the McAfee programs to no avail, but not the other utilities. It was almost like even they were unaware of this other application running in the background since they never suggested disabling it.
Either way, I'm happy to say that I am now able to successfully launch the Oracle Client installer without issue. I've also learned a little about getting the Oracle 11g Instant client to work with Toad while I worked through the issue with the installer. I could almost get by completely with just using the Instant Client if I didn't have to use SQL*Loader (sqlldr.exe) and tnsping.exe. Any suggestions for getting these two functions to work with the Instant Client would be appreciated. I tried copying the binaries and the message files into the appropriate instant client directories, but windows kept complaining about missing .dll's when I tried executing the commands.
If there is no workaround for getting these functions to work with the Instant Client, and I have to do an Oracle Client install, at least now I can. Do you know if I would need to do the full "Administrator" install to get these functions, or can I do just the "Run Time" install to get sqlldr and tnsping?
Thanks again for your help

"Unable to read file" error in Excel 2010 when downloading .xls file from IE11

We have lots of reports that have links for our users to be able to download report results in Excel format. We accomplish this by using the Excel mime type in our .asp pages. Sporadically, we are seeing "Unable to read file" errors in Excel 2010
after choosing Open from the IE11 save dialog. Choosing Save/Save As and the file will open just fine.
Also, we can sometimes cause the error to occur more frequently by switching windows during the time when the file is downloading.
If the file is opened directly from /Temporary Internet Files then it opens just fine.
Window 7 64-bit
Thanks in advance!

Hi,
I found you replied in a similar thread, did you try the workaround (Reset the IE) that provided there? Did you change a browser to test?
Then, I suggest we use Process Monitor to do further troubleshooting. Please collect all the actions of IE.exe and Excel.exe, and check the if there are some
error message/code during you open XLS file from IE 11.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Error 'RecoveryMgr.exe is not a valid Win32 application' when trying to restore in Win7

I really hope someone can help as this is driving me mad!
System details - G62 Notebook running Windows 7
The notebook crashed after a Windows update and wouldn't boot up. I made it into the recovery manager and back my files before restoring to factory settings.
Since getting back in I am unable to get my files back. I have tried through the recovery manager but it does not allow me to see the files on the dvd. I have also tried through backup and restore but no joy there either. When I click on RecoverMgr.exe on the dvd I get error 'RecoveryMgr.exe is not a valid Win32 application' and it won't open.
I hope someone has managed to solve this before as I would love my files back. All suggestions greatly appreciated and thanks in advance.

Thanks Mumbodog. Unfortunately I have tried and the files won't copy. Starting to think they are corrupt! Have tried on a few different PC's but no luck. Really annoyed Any other suggestions?

Excel ActiveX error in exe: library not registered

Hi,
I wondered if any of you can help me as I'm at a bit of a
loss. I have an application that is complied to exe, and installed with
an installer in LabVIEW 8.5.1 that uses the Excel ActiveX interface to
write to an xls file. In development and on all of my testing this
seems to work fine (with Excel 03 and 07) but I have just received a
bug report whereby on a particular install the following error has been
thrown form my Open Excel VI (see attached code). Apparently it was
working but this machine has recently upgraded some data management
software (Goldmine 6.0 -> 7.5) and since then it hasn't worked. The error generated is:
Error code:-2147319779
source: "Library not registered."
Troubleshooting
is complicated a little as this is running as an exe and the source
code seems to work fine on my development machine.
Any ideas would be GREATLY appriciated!
(my current inclination is to ask the customer to resintall Office and
Goldmine and then reinstall the LabVIEW app - so far he has only tried
reinstalling the LabVIEW software)
Shaun
(this message is also posted on Lavag.org = http://forums.lavag.org/Excel-ActiveX-error-in-exe-library-not-registered-t11912.html)
Attachments:
Open Excel.vi.png ‏52 KB

It would really help to see the relevant code, and to know which version of LabVIEW is being used. I notice the original code was developed on LabVIEW 8.5, and the Poster mentions older versions of Office (and is writing an .xls instead of an .xlsx file), suggesting the original code is about 7 years old.
About 4 years ago, I got frustrated with trying to use ActiveX, and NI developed a much more robust Report Generation Toolkit. I've adopted the RGT and haven't looked back. Most of the weird errors I used to fight are gone, and building executables is (mostly) no pain (there's a small glitch that required manual OK-type intervention when you first encounter the Toolkit in a Build). I'm guessing that it should be pretty easy to rewrite your code using the RGT in place of ActiveX, and I'm willing to help ...
Bob Schor

Urgent help CRM Support Pack Upg error sapevt.exe SAP_TRIGGER_RDDIMPDP

Hi All,
SP for CTS add-on in CRM qa 7.02 stuck. Please help as soon as possible. Aborted and tried to run in CI instance still stuck.
INFO: event SAP_IMPORT_START triggered successfully
START DISTRIBUTION OF DD-O CRQ S      20150424123453              DDIC         SAPCRMQAS 20150424123452988
START tp_getprots          CRQ S      20150424123453              DDIC         SAPCRMQAS 20150424123452988
STOP tp_getprots          CRQ S      20150424123456              DDIC         SAPCRMQAS 20150424123452988
STOP DISTRIBUTION OF DD-O CRQ S      20150424123456              DDIC         SAPCRMQAS 20150424123452988
INFO TBATG CONVERSION OF CRQ N      not needed                  DDIC         SAPCRMQAS 20150424123452988
INFO: apg locked (anticipatory program generation)
START MOVE NAMETABS        CRQ 6      20150424123456              DDIC         SAPCRMQAS 20150424123452988
START tp_getprots          CRQ P      20150424123456              DDIC         SAPCRMQAS 20150424123452988
STOP tp_getprots          CRQ P      20150424123457              DDIC         SAPCRMQAS 20150424123452988
STOP MOVE NAMETABS        CRQ 6      20150424123457              DDIC         SAPCRMQAS 20150424123452988
START MAIN IMPORT          CRQ I      20150424123457              DDIC         SAPCRMQAS 20150424123452988
INFO: apg unlocked (anticipatory program generation)
STOP MAIN IMPORT          CRQ I      20150424123518              DDIC         SAPCRMQAS 20150424123452988
INFO TBATG CREATION OF EN CRQ n      not needed                  DDIC         SAPCRMQAS 20150424123452988
INFO EXECUTION OF STANDAR CRQ 9      not needed: sxpra execution is switched off              DDIC         SAPCRMQAS 20150424123452988
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all              CRQ   0000 20150424123519              DDIC         SAPCRMQAS 20150424123452988
START EXECUTION OF REPORTS CRQ R      20150424123525              DDIC         SAPCRMQAS
START tp_getprots          CRQ R      20150424123525              DDIC         SAPCRMQAS
START imp subset           CRQ        20150424123543              APServiceCRQ SAPCRQAPP
START DD IMPORT            CRQ H      20150424123543              APServiceCRQ SAPCRQAPP
STOP DD IMPORT            CRQ H      20150424123618              APServiceCRQ SAPCRQAPP
START DD ACTIVATION        CRQ A      20150424123618              APServiceCRQ SAPCRQAPP
WARNING: System CRQ. Warning.        20150424123635 :
ERROR:       The following call returned with exit code 7:
ERROR:         sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=CRQ
ERROR:       Background jobs cannot be started.
ERROR:       Please check trace file dev_evt.
WARNING:       (This warning is harmless if no further warnings follow.)
WARNING: System CRQ. Warning.        20150424123918 :
ERROR:       The following call returned with exit code 7:
ERROR:         sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=CRQ
ERROR:       Background jobs cannot be started.
ERROR:       Please check trace file dev_evt.
WARNING:       (This warning is harmless if no further warnings follow.)
START tp_getprots          CRQ J      20150424123918              APServiceCRQ SAPCRQAPP
START tp_getprots          CRQ R      20150424125606              DDIC         SAPCRMQAS
START tp_getprots          CRQ R      20150424130559              DDIC         SAPCRMQAS
START tp_getprots          CRQ R      20150424131530              DDIC         SAPCRMQAS
START tp_getprots          CRQ R      20150424132551              DDIC         SAPCRQAPP
Services file entries
sapmsCRQ 3600/tcp # SAP System Messaging Service Port
saphostctrl 1128/tcp # SAPHostControl over SOAP/HTTP
saphostctrl 1128/udp # SAPHostControl over SOAP/HTTP
saphostctrls 1129/tcp # SAPHostControl over SOAP/HTTPS
saphostctrls 1129/udp # SAPHostControl over SOAP/HTTPS
sapmsCRQ 3603/tcp # SAP System Message Server Port
sapmsSHDCRQ             3606/tcp #Upgrade shadow instance
sapdp06             3206/tcp #Upgrade shadow instance
sapgw06             3306/tcp #Upgrade shadow instance
Thanks,
Kavitha Rajan

Hi Kavitha,
Please refer to the KBAs specified below which can assist you in resolving the issue.
2074984 - RDDIMPDP job cannot be started due to duplicated services
1702079 - Background jobs cannot be started, exit code 7 in SLOG during Support Package/transport                  import
1913676 - Troubleshooting guide for Support Package / Add-Ons Installations errors during the main import 'IMPORT_PROPER' phase in SPAM or SAINT
Thank You.
Regards,
Deepika

Refrence file error in exe

Similar Messages

Maybe you are looking for