Refresh automatically a page each 10 seconds

Hi all,
I need refresh automatically a page each 10 (or any) seconds. Maybe someone knows
how do that. I don't have idea about this.
Thans for your help.. is really URGENT

Check this thread...
http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=59772

Similar Messages

  • Refresh materialized view each second ?

    Hello all,
    I would like to refresh my materalized view each second. The creation is success with the following code, but when I monitor the table user_jobs, I see that the next scheduling is correctly planned (previous time + 1 second), but each time the view is refresh, it seems that the job is re-executed each 5 seconds.
    Do you know if this behaviour is possible ?
    Best Regards
    Sylvain
    CREATE MATERIALIZED VIEW test
    BUILD IMMEDIATE
    REFRESH FAST
    START WITH SYSDATE NEXT SYSDATE + 1/24/60/60
    AS SELECT ....

    Why would you want to refresh a materialized view every second? Why wouldn't you refresh on commit if you need the results to be immediately visible? Realistically, DBMS_JOB probably doesn't have the ability to reliably run a job with an interval that short-- it'll run it at close to the scheduled time, but it's not going to run it at exactly the second you had scheduled it.
    Justin

  • Will Anchors refresh a cgi page automatically?

    Hello all:
    I have a cgi form that is not passing data consistantly.
    I have an anchor link on the page to basically, "GO TO BOTTOM
    OF FORM".
    Could that link be causing the form to refresh thus losing
    all the cgi
    data the user has already put in?
    Can I control that with some kind of "NO REFRESH" command?
    Many thanks,
    Star2

    write the below code in PR:-
    pageContext.putMetaTag("REFRESH","<META HTTP-EQUIV=\"Refresh\" CONTENT=\"60\">");
    This will refresh the page automatically after every 60 seconds.
    --Sushant                                                                                                                                                                                                                                                                                                                                                                                                   

  • How do I make an embedded Javascript element(embedded MS Excel chart) automatically refresh so that viewers do not have to refresh the entire page to get updated information.

    I am creating a web page that features an embedded chart made by MS Excel. I would like the chart to automatically update(refresh) to show viewers live information without having to refresh the entire page. I have found that there is a way to enable this through Excel but with my current subscription cannot access that feature. I am hoping that there is a way to achieve this using Adobe Muse CC. If it is not possible, I would like to know if there is a way to add a "refresh" button that refreshes only the embedded section(Excel Chart) of the page for viewers to use manually. Thank you for your help.

    Update! The embedded spreadsheet is actually embedded using HTML rather than javascript.

  • Is it possible to refresh the home page or report page automatically?

    Hi.
    I'm develping EM plugin with EM 11 extensibility.
    Is it possible to auto refresh the home page or report page?
    It contains the view data(real time 30 sec page..) select list combo at the matric detail page.
    and it is displayed on the right of the top at the database main page
    Thanks,
    wonjo.
    Edited by: wonjo on Oct 5, 2010 10:49 PM

    Also, there are enhancements in progress to the extensibility framework which will, in future versions of EM, allow this type of control over chart/table refresh for plugins.

  • My Mac Book Pro changes the saved home page each time I start Safari.  I also get new tabs that randomly open asking to clean up my Apple

    My Mac Book Pro changes the saved home page each time I open Safari.  I am also getting random tabs opening with various "cleaning up" my computer junk.
    How do I get rid of this?  I tried some of the fixes listed but they don't seem to work or I am doing something wrong.
    THanks
    Wendi

    You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
    Back up all data before making any changes.
    One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
    If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
    Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
    Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates (OS X 10.10 or later)
    or
              Download updates automatically (OS X 10.9 or earlier)
    if it's not already checked.

  • Pages Per Second, User Modes

    What is being recorded in the Pages per second metrics, is it:
    1) The DOWNLOAD and (emulated) RENDERING of the page with its attributes/objects (pages, images, frames etc)
    OR
    2) Just the DOWNLOAD of the page with its attributes/objects.
    Does this change between User Modes i.e. Thick and Thin Client

    Hi Paul,
    A page is the eTester representation of what would be a web page in terms of navigations and actions that are performed in the web browser after the document is completely rendered and before the last transition.
    Open the navigation editor and take a look at the Navigations tree. There it can be seen how the pages are divided. Each page will have between 0 to multiple navigations. Pages with zero navigations doesn't count, these pages won't even be shown in the report. If the page have frames the page will show more than one navigation. If the web application uses ajax or a similar technology with http transactions, or if the page uses java applets, flash objects or activex controls that makes http transactions and the proxy recorder was On, then the pages most likely will show more than one navigation.
    eLoad will request all the navigations contained in any given page of any script in your load test scenario, if the web server will responds back successfuly for all the navigations, then this is counted as one page received. eLoad willl be requesting multiple pages from the different scripts that exists in the scenario submitted then it will count how many of those pages are being received in an interval of time, then makes a units convertion of the time interval in order to display it in seconds.
    The pages received per second is the average of how many pages with all the navigations contained in it were successfully obtained from the web servers every second.
    The pages per second is the same statistic regardless if you are running in thick or in thin.
    The pages per second doesn't take into consideration the download of images, scripts, css, or any other object. These are considered in the hits per second.
    A similar thread was created earlier:
    http://qazone.empirix.com/thread.jspa?threadID=11&tstart=30
    The link was inserted here for crossreference if required later.
    Regards,
    Zuriel

  • Anything that I copy on my desktop gets deleted automatically after a few seconds. Any idea what is going on ?

    I have a problem with my MBP.
    One day something weird started happening. Every time I would copy / save / download something on my desktop it got deleted automatically after a few seconds. On very very rare occasions this would not happen.
    This has been going on for 3 months now and I haven't found any sollution. The last option is to format and reinstall Lion but I hope there is a faster/better solution than that.
    I have a 2011 15-inch MBP with the up-to-date Mac OS X Lion.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
    Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search. A text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag -- do not type -- the line below into the Terminal window, then press return:
    kextstat -kl | awk ' !/com\.apple/ { print $6 $7 } '
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Step 3
    launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
    Step 4
    ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
    Remember, steps 1-4 are all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
    You can then quit Terminal.

  • My email is very slow and does not refresh automatically.

    My Yahoo and Gmail accounts on my iPhone are very slow.  They do no refresh automatically and I often have to restart the wireless to push emails out.  I thought it might be the email provider but it happens with both accounts. 

    Try these basic troubleshooting steps and see if any of them help.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Quit all apps and restart. In order to quit or close apps - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • How can I make my Introduction_mc automatically disappear after 10 Seconds and load Home_mc?

    Hi,
    How can I make my Introduction_mc automatically disappear after 10 Seconds and load Home_mc (automatically)? I don't want user to change by himself this Introduction page. It should be done automatically.
    What is the procedure and code to achieve it, please?
    Thanks.

    Hi,
    I gues you are using AS2.0, then use setInterval, in AS3.0 user Timer Class.
    AS2.0
    var interval:Number = setInterval(doThis,10000);//in milliseconds
    function doThis():Void{
    //do something;
    AS3.0
    var timer:Timer = new Timer(10000, 1);
    timer.addEventListener(TimerEvent.TIMER_COMPLETE, onTimerCompleteHandler, false, 0, true )
    function onTimerCompleteHandler(event:TimerEvent):void{
    //do something;
    For details: http://blogs.adobe.com/pdehaan/2006/07/using_the_timer_class_in_actio.html
    Warm Regards
    Deepanjan Das
    http://deepanjandas.wordpress.com

  • Why??? Simple snapshot can not refresh automatically, but can refresh manually.

    Server 1 : Oracle 7.3.4 (as a Master site)
    Server 2 : Oracle 7.3.4 (as a Snopshot site)
    Client PC: SQL*Plus (Oracle 7.3.4 Client)
    Step 1: on Client PC, start 2 SQL*Plus dialog Windows,
    one(Window A) for <Server 1> , another(Window B) for <Server 2>;
    Step 2: on <Window A> do:
    SQL>connect scott/tiger@Server1
    SQL>CREATE SNAPSHOT LOG ON scott.dept ;
    SQL>select * from dept;
    DEPTNO DNAME LOC
    10 AAAAAA AAAAA
    20 BBBBBB AAAAA
    30 CCCCCC AAAAA
    Step 3: on <Window B> do:
    SQL>connect scott/tiger@Server2
    SQL>CREATE DATABASE LINK oracle USING 'Server1';
    SQL>CREATE SNAPSHOT all_dept REFRESH fast
    start with sysdate NEXT SYSDATE+1/(24*60)
    AS SELECT * FROM scott.dept@oracle;
    -- refresh interval: 1 minute
    SQL>select * from all_dept;
    DEPTNO DNAME LOC
    10 AAAAAA AAAAA
    20 BBBBBB AAAAA
    30 CCCCCC AAAAA
    Step 4: on <Window A> do:
    SQL>insert into dept values (50,'MMMMMM','NNNNN');
    SQL>commit;
    SQL>select * from dept;
    DEPTNO DNAME LOC
    10 AAAAAA AAAAA
    20 BBBBBB AAAAA
    30 CCCCCC AAAAA
    50 MMMMMM NNNNN
    <one or two minutes later ... ... >
    Step 5: on <Window B> do:
    SQL>select * from all_dept;
    DEPTNO DNAME LOC
    10 AAAAAA AAAAA
    20 BBBBBB AAAAA
    30 CCCCCC AAAAA
    conclusion: Simple snapshot can not refresh automatically ???????
    SQL>exec DBMS_SNAPSHOT.REFRESH( list => 'all_dept',method => 'F');
    SQL>select * from all_dept;
    DEPTNO DNAME LOC
    10 AAAAAA AAAAA
    20 BBBBBB AAAAA
    30 CCCCCC AAAAA
    50 MMMMMM NNNNN
    conclusion:Simple snapshot can refresh manually.
    How to solve this problem?????
    Thank you very much
    Zhang Ming-an

    When you are manually refreshing the snapshot as scott/tiger, and your database link was defined with a 'connect to/identified by ' clause, your login credentials will be scott/tiger. When the refresh happens from the job queue, it does not use those credentials, It uses some default set. What you should probably do is:
    1. create public database link Oracle using 'server1';
    2. as scott/tiger, create database link Oracle connect to scott identified by tiger;
    3. your automatic refresh should work now.

  • Good morning! i'd like to know why when I write an email in Mail, it creates numerous copies each second which fill the trash box. My email is set up with IMAP and is a gmail account. Thanks

    good morning! i'd like to know why when I write an email in Mail, it creates numerous copies each second which fill the trash box. My email is set up with IMAP and is a gmail account. Thanks

    Open Mail preferences and select Accounts then MailBox Behavior. You probably need to unclick the safe draft to server.

  • I downloaded iMesh and I can't stop it from automatically popping up each time I request a new tab. I have uninstalled the program, but I want to stop it from defaulting as a new tab. I tried uninstalling, but it is no longer installed as an add-on

    I downloaded iMesh and I can't stop it from automatically popping up each time I request a new tab. I have uninstalled the program, but I want to stop it from defaulting as a new tab. I tried uninstalling the add on and plug in, but it is no longer installed as an add-on or plug in. How do I get the "new tab" request to simply open with a blank address in the address box instead of www.imesh.com.

    Ok, I finally managed to get rid of it.
    First I did the thing with the about:config but I flitered for imesh instead and managed to reset two thing but when I got to the keyword.URL I got the same thing as lolbabe98 did with the "An attempt to change your search engine or homepage was blocked."
    Then I did a search on my C: drive for iMesh and discovered some things that hadn't been removed even though I had unistalled both the toolbar and the actual program. After that it worked fine and I now have a regular "untitled" tab when I open a new tab.
    One last thing, when I tried to remove some of the files there was one that said it was in use, it was called datamanagerUI or something rather. The only thing I had to do there was to open Task Manager and kill a process called DATAMN~1 and I was able to remove it. Hope this helps.

  • Problem refreshing the parent page when closing a modal window.

    I have page that opens a modal window from a report link column. In the modal window I want to be able to make my changes and press an Apply button so that the modal window is closed and the parent page is refreshed to show the modified details in the report. In Firefox all works well but in IE I get the error message ‘Window.opener.location is null or not an object’ .
    When I comment out window.opener.location.href=window.opener.location.href; the modal window closes without error but I want to refresh the parent page with changes made in the modal window.
    I’m afraid my java script is very limited (the code is based on other peoples examples.)
    Parent Page I call this function from a report link column to display a modal window. Sets the hidden SAVE_STATUS field in destination page to ‘N’
    function modalWin(pshow)
    var url;
    url='f?p=&APP_ID.:'+pshow+':&SESSION.::::SAVE_STATUS:N';
    if (window.showModalDialog) {
    window.showModalDialog(url,"name","dialogWidth:650px;dialogHeight:700px"); }
    else {
    window.open(url,"name","height=700,width=650,toolbar=no,directories=no,status=no,menubar=no,scrollbars=no,resizable=no ,modal=yes");
    Destination page (modal window)
    HTML Header.
    The function closeWindow should refresh the parent page and close the modal window.
    <base target=_self>
    <script language="JavaScript" type="text/javascript">
    <!--
    htmldb_delete_message='"DELETE_CONFIRM_MSG"';
    function closeWindow() {
    if ( document.getElementById("SAVE_STATUS").value == 'Y' )
    window.opener.location.href=window.opener.location.href;
    window.close();
    //-->
    </script>
    Html Body attribute.
    onLoad="closeWindow();"
    P_UPDATE_DATE process called from the Apply changes button. Sets the SAVE_STATUS flag to ‘Y’ for the onload in the html body.
    UPDATE event
    SET event_date = :P5001_EVENT_DATE
    WHERE contract_reference = :P330_EVD_CONTRACT
    AND event_number = :P330_EVD_EVENT_NUMBER;
    :SAVE_STATUS := 'Y';
    Thanks in advance, I will have a look when back in the office on Monday.
    Cheers Pete

    Hi Chris,
    Thanks for your help. I think I've sorted it using your first suggestion doing a refresh in the parent page, I just didn't know how at the time.
    What I've got in the parent window after the call to the modal window is the reload window.location.reload(); and in the modal window I close it using window.close(); The down side being the refresh happens if I use my 'Apply changes' or 'Cancel' button but I can live with that for now.
    It seems to work in IE and firefox but as I say most of what I'm doing is cobbling together using other peoples code without really understanding exactly what it does. Anyway thanks for your help, sound like I should look into JQUERY when I have time.
    Thanks Pete
    Parent window call to modal
    function modalWin(pshow)
    var url;
    url='f?p=&APP_ID.:'+pshow+':&SESSION.::::SAVE_STATUS:N';
    if (window.showModalDialog) {  window.showModalDialog(url,"name","dialogWidth:650px;dialogHeight:700px");                                          }
    else {
    window.open(url,"name","height=700,width=650,toolbar=no,directories=no,status=no,menubar=no,scrollbars=no,resizable=no ,modal=yes");
    window.location.reload();
    Modal Window Close.
    window.close();

  • Precompile and page-check-seconds elements not working in 9.2

    Hi,
              I am coming across a very wierd error, and was wondering if anyone could help. We have a plain struts webapp deployed on weblogic 9.2.2, and i am trying to improve performance by adding the <precompile> and <page-check-seconds> tags to the weblogic.xml. Here is the relevant section:
              <jsp-descriptor>
              <debug>true</debug>
              <precompile>true</precompile>
              <page-check-seconds>-1</page-check-seconds>
              </jsp-descriptor>
              However, when the server starts up, I get the following error saying the precompile and page-check-seconds are not allowed:
              D:\bea92\user_projects\domains\ejDomain\applications\ej\WEB-INF\weblogic.xml:45:10:45:10: problem: cvc-complex-type.2.4b: Element not allowed: precompile@http://www.bea.com/ns/weblogic/90 in element jsp-descriptor@http://www.bea.com/ns/weblogic/90:<D:\bea92\user_projects\domains\ejDomain\applications\ej/WEB-INF/weblogic.xml:45:10>
              Could someone please help figure this out? All help is appreciated.
              Thanks,
              Vik.
              Edited by vshevde at 05/06/2008 12:55 PM

    Please replace <debug> with <verbose>.
              For more details, check documentation at
              http://e-docs.bea.com/wls/docs92/webapp/weblogic_xml.html#wp1038491

Maybe you are looking for

  • Error encountered during provisioning of user to SAP CUP in OIM 11g R1 BP07

    We recently updated our environment from 11.1.1.5 BP05 to 11.1.1.5 BP07. We are facing an issue with provisioning users to SAP CUP system. We receive an error specifying : Response: oracle.iam.connectors.sap.cup.ws.submitreq.ObjectFactory Response De

  • URGENT:LWF Node is missing: Function INUCD adition to INN1?

    Dear Experts, We have applied Support packages : BASIS - SAPKB62062 and SAPKB62063 ABAP - SAPKA62062 and SAPKA62063 HR - SAPKE47045 to SAPKE47074 Now in spro LWF node is missing and system is showing an run time error. I have gone through the SAP not

  • Migration using BDC

    Hi, I want to upload Open AR details into R/3 using BDC. I need the table name for Open AR and its mandatory fields. And send any link regarding Open AR. Regards, Nithy.

  • Inbound Document Sequencing

    I'm designing some new EDI flows and I would like to have the documents processed sequentially when they come through B2B 11G. I have found some documentation on the sequencing check box for AQ and JMS, but I have not been able to find anything for F

  • How slow is too slow?

    In December of 2005, I bought a mac mini. I bought it because of my pervious experience with the complete invulnerability of macs to doltish users like me, and because I just happen to like the way macs run. My mini has been fairly slow the entire ti