Refresh Standard Business Area - Now have multiple flexfield segments

Hi,
Having a problem with one of the business area's not showing the correct folders in a UAT environment, so i refreshed the Business Area (right click -> refresh). We have 2 chart of accounts, 2 sets of books, 2 operating units etc, and now its added in a GL flexfield segment for each Chart of Accounts instead of the individual ones before hand. See pic below. This is a real problem, and this needs reverting back to how it was. We have 2 EUL's, one on Disco V4, and the other on Disco V10.
Image: !http://homepage.ntlworld.com/slythgoe/disco_problem.JPG!
Would appreciate any help on this as its going to cause so many problems.
Regards,
Gary Lythgoe
Edited by: gary_lythgoe on Sep 25, 2008 3:36 AM
Edited by: gary_lythgoe on Sep 25, 2008 3:36 AM

Hi Gary
When you did the refresh you would have been warned that Discoverer had uncovered changes between the folder in EUL and the object in the database. In order to get where you are you would have had to have accepted the changes because Discoverer will not of its own accord change your folder unless you agree to let it do so.
Just restore the folder from the last backup. That would be the easiest way of getting it back the way it was. If you don't have a backup then you'll have to manually work the folder to get it back into a clean state. I don't think you have damaged your EUL. You've just either got to restore the folder from a backup or manually put it back to rights. If you haven't been taking EUL Export backups now would be a good time to start.
The moral of the story is to pay close attention to what Discoverer reports when you ask it to do a refresh. If you see something you don't understand and need to check it out you should click the Cancel button. The EUL will be left unchanged and you can go and determine what is going on.
Best wishes
Michael

Similar Messages

Why do the tabs now have multiple favicon images showing after the last update?

The last update to Firefox has created a problem with the tabs. The tabs now have multiple images of the websites favicon showing. When I open a tab and go to a website, when the favicon shows it will then create multiple images of that favicon. When I click off the tab and back on it, they disappear but this obviously should not be happening and didn't start until the last update was installed. I even did a Refresh and that didn't fix the problem. I tried to upload an image but the area just has a spinning wheel and the image size was only 5.41kb. Apparently that isn't working so well either. It appears Mozilla Firefox has created some bugs for it's browser and help forum.
If anyone knows how to fix this or to get Mozilla to fix their problem, it would be appreciated. Thank you!

You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to Copy Standard Business Areas in Oracle apps

Does anyone knows how we can copy new Standard BUsiness Areas in Oracle Apps for fresh implementations.
Thanks

Hi,
You can export the business area and then import it selecting the option to create a new version of duplicated items.
However, I wouldn't recommend doing this. If you just want a new business area, then create a new business area and use manage folders to move the folders you want into the business area. In general there is no need to copy the folders for new implementations but if you want to add copies of folders into the new business area then drop and drop the folders into the new business area.
Rod West

How R12 seeded (standard) business areas are created in fresh EUL

Hi,
As per Note ID 1074326.1 under section "6.8. Import Discoverer Content for E-Business Suite Release 12 using adupdeul.sh mode=complete"
all the existing business areas are also included while import.
Kindly let me know how R12 seeded (standard) business areas are created in fresh EUL.
Regards,

Hi,
The adupdeul.sh script uses the Java command line utility to import the EUL stored in the .eex files that are included in the R12 installation.
Rod West

Illustrator 6.0 vector paths, when opened in Illustrator CC are now all broken into segments?

Illustrator 6.0 vector paths, when opened in Illustrator CC are now all broken into segments at key points (ie. a circle, has become a series of 4 quarter circle lines. Has anyone experienced this and is there a quick fix? I still have both Illustrator versions installed and can go back to use the original files, however I'd like to upgrade smoothly without having to redo all my vectors!

That is strange sounds like what happens when you open a die built in autocad, in illustrator. What happens if you paste a CS6 path into CC?

Discoverer Standard Business Areas

Hi,
Does anyone have a link to any documentation where I can find out the list of Business Areas that come as standard with Discoverer?
Many thanks
Martin

Pl also identify the EBS version. See if these MOS Docs (and the docs they refer to) can help
Discoverer HRMS Business Areas For Compensation Workbench and Benefits          (Doc ID 560773.1)
Oracle Human Resources Management Systems (HRMS) Discoverer for Total Compensation and Benefits (OAB          (Doc ID 362434.1)
Using Discoverer 10.1.2 with Oracle E-Business Suite Release 12          (Doc ID 373634.1)
The BAs and discoverer reports are shipped with each HRMS RUP or family pack. These need to be loaded into the database.
HTH
Srini

HT204150 I now have multiple icloud accounts. How do you determine which one is holding the data?

I recently set up a new Windows 7 PC. I backed my phone to the icloud. When I plugged my phone into itunes on the PC it wiped my contacts and music out. Now I'm finding I have multiple iCloud accounts. I don't know which one to use or how to get my data restored to the phone. Very frustrating! Can anyone help me? --ptowngal

Go to icloud.com, sign into each of your iCloud accounts and see which one(s) contain your data.

Not Standard Business Area determination

I need to determine Business Area acording to storage locations. I know that this solution is poor, but I cannot choose another way.
Storage loactions are already known during goods issue in delivery. So during, postings materials in delivery, Businness area should be determined/ changed. New business area must be updated also in related sales order, because from this document is taken into invoice and posting documents. What user exist should I use?
Maybe business area can be determined already during invoice creation? What do You think.
Thanks in advance for help!
/gosia
Edited by: Malgorzata Paraficz on Aug 11, 2010 2:59 PM

Hello Gosia
I think you can influence Business Area determination during invoice creation:
Try Include LV60AA89 (Form VBRP_GSBER_ERMITTELN) in which you have the enhancement spot:
ENHANCEMENT-POINT VBRP_GSBER_ERMITTELN_01 SPOTS ES_SAPLV60A.
The include also uses Function module RV_BUSINESS_AREA_DETERMINE.
Work with an ABAPer ( if you are not one).
Let me know if it helps.

Import Standard Business Area of Oracle Applications

Dear all,
I install Discoverer Administration 4i and i create EUL (Apps) to connect to Oracle Applications 11.5.0, when I import Standard(BASE) Business Area of Applications
,some BA are imported but not all.
Can anyone help me to import all BA ?
Thanks to all

Hi,
If you are just starting off, then you would be better off using the latest Discoverer 10g as Discoverer 4i is in de-support mode by Oracle.
see
Note 237607.1
Note 313418.1 Using Discoverer 10.1.2 with Oracle E-Business Suite 11i
the java EUL command-line, comes with a logging feature.
Note 139516.1 Using Discoverer 4i with Oracle Applications 11i

Just updated - now have multiple copies of Ps and Lr

I just finished updating using the CC app. I now have two copies of Lr and a copy of Ps/cc and Ps/cc 2014. Should I uninstall one of the Lr copies? Should I uninstall Ps/cc and Keep Ps/cc 2014?

WDKlein1000, Yes you can uninstall the older versions of Lr & PS CC as you already have the latest versions. So, no need to keep both unless you want to for various purposes.
~ Arpit

Can you now have multiple Itunes accounts sharing content on one computer?

Hi - I was trying to find this information on line but cannot.
The last "big" Itunes update (11.2?) prevented multiple Itunes accounts from sharing content on one computer. Well, you can, but with consequences. For example, my husband purchased a movie rental with his Itunes account on our computer when he logged on to Itunes, but then I could not download any Itunes content for 30 days when I logged on to my account. I no longer purchase any content from Apple because of this. I was hoping this feature has been discontinued – it prevents households from purchasing Itunes. We never pirate or steal any content at all. In fact, this feature forces us out of the Itunes universe to purchase movie rentals and music elsewhere.
Not just trying to complain, really. Legitimately want to find out if this rights policy still exists before we both try to rent or purchase anything from Itunes.
Thanks.

https://discussions.apple.com/message/24659889#24659889
"Won't it present problems if the daughter needs to reauthorize the computer for her own use before 90 days,"
No. The 90 day limit ONLY applies to redownloading purchases from iTunes..
So if she were to redownload purchases from the father's account then she'd have to wait 90 days to redownload form her own account. and the computer can be authorized for multiple iTunes account (pretty sure it's 5) . You don't need to later reauthorize for first account if you authorize for a different account.
More discussion on 90 day wait period - https://discussions.apple.com/thread/6094005 - disable automatic downloads so message doesn't appear when using multiple accounts.
Most people don't see the "re"

Upgraded to 10.8.5 and now have multiple monitor issues

hi all,
i recently updated my macpro (4,1) to 10.8.5 from 10.6.8.   i have two monitors hooked up to the gt120, one through dvi-->hdmi cable and one displayport-->hdmi cable. both monitors have worked fine for a year or two before update.
my desktop extends across both screens just fine. however, when i open up system preferences to adjust the color of the second monitor (using the display window on the second desktop) any changes i make affect the main monitor, not the second.   so i try changing color settings on the main monitor and it affects the main monitor, too. so i have no control over the second monitor's color.
i have reset PRAM, disconnected power, etc. i downloaded nvidia's latest driver. not sure where to go from here. btw - i am having other minor issues since upgrade such as my moure (wacom intuos) won't move onto second monitor; it's stuck on main monitor.   my apple wireless mouse will span both desktops. i guess it's probably unrelated but since it is affected by the monitors, too, maybe it's related.
any thoughts? thanks.
macpro (2x2.26 quad)
12 GB RAM
gt 120
gtx 285
internal RAID

If you have them in iCloud, open System Preferences > iCloud and activate Contacts

Ever since I switched to mail I now have multiple extra folders on my iPhone. How do I get rid if these?

How do I get rid of all these extra folders on my iPhone that mail 5.0 seems to have created?

Look at the manage your account on each to determine which one is the right one for you. and then use the delete account option on the iCloud account you dont want

Every time I create a new folder on my iMac desktop, the folder immediately copies every other folder and file on my desktop, so that I now have multiple, unwanted copies of every folder taking up memory. What caused this and how do I fix it? Thanks.

I also can not move any items on my desktop to another spot on the screen.

Holy cow!???
Here's an older cure I'd try...
First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.dock.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.sidebarlists.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

Business Area v/s Profit Center

Hi Friends,
Can some body tell me the major differences between a Business Area and a Profit Center
or pls send me to mail i .e [email protected]
Thanking u,
Siva S.

Hello,
Business area is higher in hierarchy compared to Profit center. A business area can have multiple PCs assigned to it.
Business area is used for reporting for internal -management accounting purpose. Financial statements for internal purposes can be drawn for BA just as for Co Cd for external and auditory purpose.
Profit center are operation entities and lower in hierarchy, have a person reponsible and many cost centers can be assigned to one PC. It is used only for statistical purpose.Profit center data canbe rolled up to BA data.
Also see:
http://help.sap.com/saphelp_47x200/helpdata/en/02/30793485231774e10000009b38f83b/frameset.htm
Thanks,
Sourabh

Refresh Standard Business Area - Now have multiple flexfield segments

Similar Messages

Maybe you are looking for