Reg: Conversion for quantity

Hi All,
I need to convert the quantity to KG ,i have the two function modules 1)UNIT_CONVERSION_SIMPLE 2)CF_UT_UNIT_CONVERSION,can u guys help me out in conversion process in detail..i need to convert to this field VBRP-FKIMG ( Convert into KG using VBRP-VRKME )
with regards,
sumanth reddy

Hi,
Check it
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
    INPUT                      = "enter the value to be converted eg: lv_input
   UNIT_IN                    = ' '     "enter the unit which is at present eg. 'LB'
   UNIT_OUT                   = ' ' "enter the unit to which you want to covert eg. 'KG'
IMPORTING
   OUTPUT                     = "displays the converted value eg: lv_output
EXCEPTIONS
CONVERSION_NOT_FOUND       = 1
DIVISION_BY_ZERO           = 2
INPUT_INVALID              = 3
OUTPUT_INVALID             = 4
OVERFLOW                   = 5
TYPE_INVALID               = 6
UNITS_MISSING              = 7
UNIT_IN_NOT_FOUND          = 8
UNIT_OUT_NOT_FOUND         = 9
OTHERS                     = 10.
write:/ lv_output
regards,
John

Similar Messages

Reg:Conversion for Net value

Hi All,
          I need to convert vbrp-netwr (net value) into USD with function module                                        CONVERT_TO_LOCAL_CURRENCY .can any one can help me out by posting answer in detail.
with regards,
sumanth reddy

Hi Sumanth,
Chk this out
data: lv_amount type p decimals 2.
CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
EXPORTING
CLIENT                  = SY-MANDT
    date                    = sy-datum
    foreign_amount          = '1000' amount which you wanted to   (table-filed)
    foreign_currency        = 'XXX' from what currency (table-filed)
    local_currency          = 'USD' to currency (table-filed)
RATE                    = 0
TYPE_OF_RATE            = 'M'
READ_TCURR              = 'X'
IMPORTING
EXCHANGE_RATE           =
FOREIGN_FACTOR          =
   LOCAL_AMOUNT            = LV_AMOUNT   =====> final amount which is tobe displayed
LOCAL_FACTOR            =
EXCHANGE_RATEX          =
FIXED_RATE              =
DERIVED_RATE_TYPE       =
EXCEPTIONS
NO_RATE_FOUND           = 1
OVERFLOW                = 2
NO_FACTORS_FOUND        = 3
NO_SPREAD_FOUND         = 4
DERIVED_2_TIMES         = 5
OTHERS                  = 6
IF sy-subrc = 0.
WRITE: LV_AMOUNT.
ENDIF.
revert for further clarification
Thanks and Regards'
Srikanth.P

String Conversion into Quantity field ----------Sales Orders

Hi Experts,
Can any of you give an standard function module or conversion routine for String conversion to Quantity field.
The problem is I pass on 5 value as a string and while the system creates any sales orders, now in the quantity filed
it shows me as 0.005 and for value 7 it gives me as 0.007.
So, Now I want a conversion in such a way that if I pass 5 then the system should 5.000 and if I pass 10 it should show
as 10.00 likewise for 100 or above also.
Thank you,
KishoreJ.

Hi,
You have check , what is user format configure in each user then reply the forum.
Thanks
With Regards
I.Muthukumar

How to set reg.cgi for VideoPhoneLabs

i start with stratus .i try set it to work with my dedicated apache server and sql but have no clue how to do it or where to put this file on my server.
i realy have probleme with reg.cgi
for now i did www/cgi-bin/reg.cgi and in the xml i set my websiteurl = "http://88..../cgi-bin/"
also how to complete reg.cgi for have it to talk with my db ?
here the reg.cgi file.
help please ...
#! /usr/bin/python --
reg.cgi by Michael Thornburgh.
This file is in the public domain.
IMPORTANT: This script is for illustrative purposes only. It does
not have user authentication or other access control measures that
a real production service would have.
This script should be placed in the cgi-bin location according to
your web server installation. The database is an SQLite3 database.
Edit the location of the database in variable "dbFile".
Create it with the following schema:
.schema
CREATE TABLE registrations (
 m_username VARCHAR COLLATE NOCASE,
 m_identity VARCHAR,
 m_updatetime DATETIME,
 PRIMARY KEY (m_username)
CREATE INDEX registrations_updatetime ON registrations (m_updatetime ASC);
# CHANGE THIS
dbFile = '.../registrations.db'
import cgi
import sqlite3
import xml.sax.saxutils
query = cgi.parse()
db = sqlite3.connect(dbFile)
user = query.get('username', [None])[0]
identity = query.get('identity', [None])[0]
friends = query.get('friends', [])
print 'Content-type: text/plain\n\n<?xml version="1.0" encoding="utf-8"?>\n<result>'
if user:
 try:
 c = db.cursor()
 c.execute("insert or replace into registrations values (?, ?, datetime('now'))", (user, identity))
 print '\t<update>true</update>'
 except:
 print '\t<update>false</update>'
for f in friends:
 print "\t<friend>\n\t\t<user>%s</user>" % (xml.sax.saxutils.escape(f), )
 c = db.cursor()
 c.execute("select m_username, m_identity from registrations where m_username = ? and m_updatetime > datetime('now', '-1 hour')", (f, ))
 for result in c.fetchall():
 eachIdent = result[1]
 if not eachIdent:
 eachIdent = ""
 print "\t\t<identity>%s</identity>" % (xml.sax.saxutils.escape(eachIdent), )
 if f != result[0]:
 print "\t\t<registered>%s</registered>" % (xml.sax.saxutils.escape(result[0]), )
 print "\t</friend>"
db.commit()
print "</result>"

Persistent binding is effectively provided by STMS (MPxIO) - is there anything in particular you're wanting to do that STMS doesn't provide?

Unit of measure conversion for CIN is not relevant for pricing

During creation of Ad item type order, when we enter the planned ad size e.g. A CO (Columns) x B IN (Inches), the system is showing a message "Unit of measure conversion for CIN is not relevant for pricing" and pricing is not determined in the Billing Data Set. However if the planned ad size is maintained as A CO (Columns) x B MM (Millimeters), there is no impact to pricing conditions.
Any light how to fix this issue?
Thanks,
Suseela. V

Dear Suseela,
You need to maintain Unit of conversion using transaction code JH51. You have to follow the path Logistics-Advertising Management-Master Data-Conditions-Order/Billing Document-UM for Pricing.
Here you can maintain combination using Booking Unit, Content Component, Design type and assign Unit of Measure to get relevant pricing into billing set conditions.
Hope it will help. Thanks!
Regards
Indra

What are the special conversions for time in update rules?

What are the special conversions for time in update rules?

Hello,
Special conversions for time in update rules are automatically conversion rules.
Example: If the cube contains calendar month and your transfer structure contains date, the date to month is converted automatically.
Assign points if this helps,
Regards,
Jorge Diogo

Sales Order Conversion for Go-Live

Folks,
I would like to get your expert thoughts on sales order conversion for go-live. I will give my thoughts below and would like to see if you can extend them and make this better.
1. The environment is this: the order entry systems are several external systems interfacing with SAP CRM. Therefore, there are two options to bring the sales orders to SCM: i) Use the same interface (BAPI_APO_AVAILABILITY_CHECK that is called from CRM) and create the orders, or, ii) Create the sales orders in ECC and then use the sales order integration model. Note that this is the only time sales orders will come from the ECC system. In steady state, they will come from CRM and based on the SPM scenario that SAP has enabled, they WILL NOT be replicated in ECC
2. Ensure that all deliveries in the system have been executed. That is, there is no stock that has been assigned to a delivery and the delivery has not been shipped. If this is not the case, you have to bring the deliveries into the system also. So, to clarify, no outstanding deliveries will be brought into the system as part of the conversion.
3. Sales order fields related to BOP will be populated through program or by other means. This is implementation specific. Some example fields are: i) Sales Org, ii) Delivery Priority, iii) Shipping Conditions on the header, iv) Transportation Zone of customer, v) Ship-to Party number, etc.
4. Run BOP for all the sales orders based on the criteria that has been defined for this conversion. Note that the criteria for the conversion could be different from the criteria that we will use for steady state.
Could you add any missing steps?
Thanks,
Satish

thanks nitin
i would like to use it as prepayemnt itself
but when i am trying to load using oe_payments base table it loads
but when i use data and use in oe_payments_iface all it doesnot load after i run the order import program
can u plz suggest me where i am going wrong
thnaks

Best practice for "Quantity" field in Asset Master

Hi
I want to know what is the best practice for "Quantity field" in asset master. It should be made displayed only or required field in Asset Master creation.
Initially I made this field as required entry. So user entered 1 quantity. At the time of posting F-90, he again entered quantity. So my quantity in asset master got increased. Hence i decided to make that field display only in asset master creation.
Now i made that field as display only in asset master creation. At the time of posting F-90, that quantity field is not coming only. I check my field status group for posting key as well as GL account. Its optional field. Inspite of that user is able to make entry in F-90. Now quantity field is '0' only in asset master even though there is some value in asset.
Please help what is the best practice wrt quantity field. Should be open in asset master or it should be display only.

Hi:
SAP Standard does not recommend you to update quantity field in asset master data. Just leave the Qty Field Blank , just mention the Unit of Measure as EA. While you post acquisition through F-90 or MIGO this field will get updated in Asset master data automatically. Hope this will help you.
Regards

Can anyone Explain about Data conversion for Material master In SAP MM

Can anyone Explain about Data conversion for Material master, Vendor In SAP MM
Thanks

Hi,
Refer following link;
[Data Migration Methodology|http://christian.bergeron.voila.net/DC_Guide/Data_Migration_Methodology_for_SAP_V01a.doc]

Why is adobe requiring me to make a purchase in order for me to create a pdf from word? I paid for the service in April which included unlimited conversions for a year

why is adobe requiring me to make a purchase in order for me to create a pdf from word? I paid for the service in April which included unlimited conversions for a year

Make sure you're actually logged-in to your account.

File Content Conversion for Unequal Number of Columns

Hi,
Iam following this thread FCC for Unequal Number of Columns.
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
when iam doing ,iam getting an error
Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'TOTALSET.fieldFixedLengths' or 'TOTALSET.fieldSeparator' is missing Consistency check: no. of arguments in 'TOTALSET.fieldFixedLength' does not match 'TOTALSET.fieldNames' (0 <> 1)
My conversion parameters are
Recordset Structure : TOTALSET,*
TOTALSET.fieldNames : ITEMSET
ignoreRecordsetName : true
TOTALSET.fieldSeparator : 'nl'
My file structure is as below
01,021000021,G4886704,080919,0742,001,,,2
02,G4886704,021000021,1,080918,0742,,2
03,000000135073477,,010,105303839,,,015,489113155,,,045,489039455,,,072,73700
Please help in resoving the error.
Thanks in Advance
Srinivas

Hi Srivinas,
your file structure is as below
01,021000021,G4886704,080919,0742,001,,,2
02,G4886704,021000021,1,080918,0742,,2
03,000000135073477,,010,105303839,,,015,489113155,,,045,489039455,,,072,73700
So it's easy, you have to use KEYFIELD option, coz you have something like that :
Line 1 : keyfield = 01 following by a limited number of columns (e.g 30 fields for Structure1)
Line 2 : keyfield = 02 following by a limited number of columns (e.g 14 fields for Structure2)
Line 3 : keyfield = 03 following by a limited number of columns (e.g 23 fields for Structure3)
Thanks to the Keyfield, you define a field which is present in each line that you can used to distinguished the different structures of lines. In your case, it seems that the keyfield is the first column (01, 02, 03).
Try to use that:
Recorset = TOTALSET (and don't use option "ignoreRecordsetName : true")
Recordset structure =Structure1,1,Structure2,(star),Structure3,(start) (the difficulty will be to find the good use of "*" and "1", but after some tests you will find the good one).
Note: replace (start) by the character " * "
Key field value = keyfield
Key field type = String (case sensitive)
Structure1.fieldNames = keyfield,field2, field3 etc.. of Structure1
Structure2.fieldNames = keyfield,field2, field3 etc.. of Structure2
Structure3.fieldNames = keyfield,field2, field3 etc.. of Structure3
and then you will have a XML like that:
TOTALSET
Structure1 and all its fieldN
Structure2 and all its fieldN
Structure2 and all its fieldN
Structure3 and all its fieldN
Structure3 and all its fieldN
TOTALSET
Structure1 and all its fieldN because I used Structure1,1
Structure3 and all its fieldN
Regards.
Mickael
Edited by: Mickael Huchet on Apr 20, 2009 5:18 PM
Edited by: Mickael Huchet on Apr 20, 2009 5:19 PM

Hierarchy on file content conversion for receiver?

Y'all,
I'm stuck in this problem and I haven't find a solution to solved it... so, all your clues and reply's are really appreciate...
The basic problem is a File content conversion for a receiver C.C. that is not working and it's raising some errors in the RWB, I have gone thru some blogs but I still having a lot of doubts...
I want to produce a flat TXT file that will have a line for every node or subnode, it doesn't matter if it's not represented as hierarchical structure like this one... but the records must be produced or written in the same order...
Man_Del_Header as main node with Man_Header, Delete_Detail and Trailer as subnodes...
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_DISTRIBUTOR_DELETE xmlns:ns1="http://xxx.com/xi/POSout">
 <Man_Del_Header>
 <MD_Header>|HM|1|</MD_Header>
 <MD_StoreNumber>051</MD_StoreNumber>
 <MD_filler1>|2|0000|3|</MD_filler1>
 <MD_EffDate>09/17/07</MD_EffDate>
 <MD_filler2>|4|005|5|dsdvnd|7|</MD_filler2>
 <MD_BatchNumber>500</MD_BatchNumber>
 <MD_fiiller3>|8|</MD_fiiller3>
 <MD_BatchDescr>DELETE PREV CST BTCH</MD_BatchDescr>
 <MD_filler4>|10|D|</MD_filler4>
 <MD_linef>1</MD_linef>
 <Man_Header>
 <Man_Header>|HM|1|</Man_Header>
 <Man_StoreNumber>051</Man_StoreNumber>
 <Man_filler1>|2|0000|3|</Man_filler1>
 <Man_EffDate>09/17/07</Man_EffDate>
 <Man_filler2>|4|005|5|dsdvnd|7|</Man_filler2>
 <Man_BatchNumber>500</Man_BatchNumber>
 <Man_filler3>|8|</Man_filler3>
 <Man_BatchDescription>Delete Distributor</Man_BatchDescription>
 <Man_filler4>|</Man_filler4>
 <Man_linef>Constant</Man_linef>
 </Man_Header>
 <Delete_Detail>
 <Delete_Detail>|D|901|170|</Delete_Detail>
 <Delete_DistribNumber>0000005010</Delete_DistribNumber>
 <filler9>|</filler9>
 <delete_linef>1</delete_linef>
 </Delete_Detail>
 <Delete_Detail>
 <Delete_Detail>|D|901|170|</Delete_Detail>
 <Delete_DistribNumber>0000005011</Delete_DistribNumber>
 <filler9>|</filler9>
 <delete_linef>1</delete_linef>
 </Delete_Detail>
 <Trailer>
 <Trailer>|T|1|</Trailer>
 <TotalRecCnt>00005</TotalRecCnt>
 <filler1>|2|</filler1>
 <NoOfHeaders>00002</NoOfHeaders>
 <filler2>|3|</filler2>
 <NoOfAdds>00000</NoOfAdds>
 <filler3>|4|</filler3>
 <NoOfChanges>00000</NoOfChanges>
 <filler4>|5|</filler4>
 <NoOfDeletes>00002</NoOfDeletes>
 <filler5>|13|</filler5>
 <NoOfSubstitution>00000</NoOfSubstitution>
 <filler6>|</filler6>
 <linef>1</linef>
 </Trailer>
 </Man_Del_Header>
 <Man_Del_Header>
 <MD_Header>|HM|1|</MD_Header>
 <MD_StoreNumber>061</MD_StoreNumber>
 <MD_filler1>|2|0000|3|</MD_filler1>
 <MD_EffDate>09/17/07</MD_EffDate>
 <MD_filler2>|4|005|5|dsdvnd|7|</MD_filler2>
 <MD_BatchNumber>500</MD_BatchNumber>
 <MD_fiiller3>|8|</MD_fiiller3>
 <MD_BatchDescr>DELETE PREV CST BTCH</MD_BatchDescr>
 <MD_filler4>|10|D|</MD_filler4>
 <MD_linef>1</MD_linef>
 <Man_Header>
 <Man_Header>|HM|1|</Man_Header>
 <Man_StoreNumber>061</Man_StoreNumber>
 <Man_filler1>|2|0000|3|</Man_filler1>
 <Man_EffDate>09/17/07</Man_EffDate>
 <Man_filler2>|4|005|5|dsdvnd|7|</Man_filler2>
 <Man_BatchNumber>500</Man_BatchNumber>
 <Man_filler3>|8|</Man_filler3>
 <Man_BatchDescription>Delete Distributor</Man_BatchDescription>
 <Man_filler4>|</Man_filler4>
 <Man_linef>Constant</Man_linef>
 </Man_Header>
 <Delete_Detail>
 <Delete_Detail>|D|901|170|</Delete_Detail>
 <Delete_DistribNumber>0000005012</Delete_DistribNumber>
 <filler9>|</filler9>
 <delete_linef>1</delete_linef>
 </Delete_Detail>
 <Delete_Detail>
 <Delete_Detail>|D|901|170|</Delete_Detail>
 <Delete_DistribNumber>0000005013</Delete_DistribNumber>
 <filler9>|</filler9>
 <delete_linef>1</delete_linef>
 </Delete_Detail>
 <Delete_Detail>
 <Delete_Detail>|D|901|170|</Delete_Detail>
 <Delete_DistribNumber>0000005014</Delete_DistribNumber>
 <filler9>|</filler9>
 <delete_linef>1</delete_linef>
 </Delete_Detail>
 <Trailer>
 <Trailer>|T|1|</Trailer>
 <TotalRecCnt>00006</TotalRecCnt>
 <filler1>|2|</filler1>
 <NoOfHeaders>00002</NoOfHeaders>
 <filler2>|3|</filler2>
 <NoOfAdds>00000</NoOfAdds>
 <filler3>|4|</filler3>
 <NoOfChanges>00000</NoOfChanges>
 <filler4>|5|</filler4>
 <NoOfDeletes>00003</NoOfDeletes>
 <filler5>|13|</filler5>
 <NoOfSubstitution>00000</NoOfSubstitution>
 <filler6>|</filler6>
 <linef>1</linef>
 </Trailer>
 </Man_Del_Header>
</ns1:MT_DISTRIBUTOR_DELETE>
|HM|1|051|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|DELETE PREV CST BTCH|10|D|1
|HM|1|051|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|Delete Distributor|Constant
|D|901|170|0000005010|1
|D|901|170|0000005011|1
|T|1|00005|2|00002|3|00000|4|00000|5|00002|13|00000|1
|HM|1|061|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|DELETE PREV CST BTCH|10|D|1
|HM|1|061|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|Delete Distributor|Constant
|D|901|170|0000005012|1
|D|901|170|0000005013|1
|D|901|170|0000005014|1
|T|1|00006|2|00002|3|00000|4|00000|5|00003|13|00000|1
So as you can see, i wanna produce a flat file that will have line or record for each node, it doesn't matter that it has a hierarchy or a deeper level, it should be a simple flat file...
The thing is that i have been trying to setup the receiver comm. channel and it's raising some errors like Could not process due to error:
java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value 'XXXX')', probably configuration error in file adapter (XML parser error)'
I have checked this blog:
/people/karthiknarayan.kesavan2/blog/2007/08/22/file-content-conversion-for-multi-hierarchical-structure
Unfortunately i don't know if there's another way to achieve this...

Jerry,
it easy if you go with multi mapping concept and without BPM if you are above >XI3.0 SP14.and use Append mode in the receiver file adapter.
just create the target structure like root under that Man_Del_Header,Man_Header,Detail,Trailer at the same level but got be careful with occurences.
Source:
I think from your structure you have
Man_Del_Header (1-unb)
Man_Header (1-1)
detail (0-unb ) may be (1-unb)
trailer (1-1)
create target DT like:
ROOT
..Man_Del_Header (1-1)
..Man_Header (1-1)
..detail (0-unb ) may be (1-unb)
..trailer (1-1)
all are at same level under ROOT.
create MT,MI,MM,IM.
in MM just map correspoding fields and if you have any unbounded onces map the nodes too. and map Man_Del_Header in the source to MT_XYZ (important)
and in the MM go to MESSAGES tab and change the occurences of the target Message to 0-unbounded same way in the interface mapping 0-unbounded.
here it create anothe extra node in the mapping something like Message1,this is ok.
and in ID just create all other objects like as usual except creating Interface determination ,in that select the extended radio button.
in reciever File CC use FCC ,would be very simple in the recordsetstrcture give
your four nodes Man_Del_Header,Man_Header,Detail,Trailer.
and use either fixed or field seperator.use append mode in recv File CC otherwise it will generate files as many occurences your source "Man_Del_Header" has ,cos we are mapping it to the MT--xyz .
thats it you are ready to go...
if any error post back here again.
you can make use of this thread
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible (here there are two target DT ,but you just create one DT,remaining are similar)
good luck.
Babu

Content conversion for multilevel varying structure File to Idoc

Hi All,
I have following file structure.
VO
C1
S1 1 to unbounded
     H1 1 to unbounded
          D1 0 to unbounded
          D2 0 to unbounded
          U2 0 to unbounded
          UC 0 to unbounded
My Idoc structure.
ISU_EL34
     IDOC 0 to unbounded
          E1ISU34 1 to unbounded
               ZSEGMENT 0 to 1
I have applied the content conversion for the length specific file as follows.
Recordset structure: VO,1,C1,1,S1,1,H1,1,D1,,D2,,U2,,UC,
Do I need to do any changes over here to satisfy the above file structure.
V0 and C1 occurs only once in a file.
for S1 I should have H1 compulsory and others are optional, but i need to create Idoc when D1 data is available only.
I'm able to read the total file with the above content conversion.
MY requirements:
1) I need to create the Idoc based on the occurance of D1 node. I'm using H1 data also in the idoc not S1.
2) My doubt is whether the content conversion I have provide is applicable to the structure I have prepared.
3) When I'm trying useOneAsMany function for the above ie H1 data should repeat in Idoc as and when D1 repeats.I'm failing the error is both queues are not contain same number of data..
Could anyone suggest how I should approach for the above scenario.

Hi Sravya,
It is really helpfull answer , Thanks for sharing my problem .
It worked for this purpose, but I'm facing following problems
MY scenario
The file contains records V0,C1,S1,H1,D1,D2,U2 and Uc
In which Im using the data of H1,D1,D2,U2 and UC for creating target Idoc.
Every H1 contains at least 1 D1 record, If D1 exists D2 ,U2 and UC may or may not exist.If exists those are in a sequence and should consider the data of them to create Idoc.
Idoc should be created for every D1.
Problem facing:
Do we have any mechanism to group the D1 records to the relevant header.since Im unable do this with content conversion.
I think bcz of above problem; some records (D2 & U2 & UC) data is populating in Idoc even there is no D2,U2 and Ucs.
Thanks,
venu.

Query on Content conversion for Receiver SFTP Adapter

Hi Experts,
We have the receiver structre as follows:
<DT_Receiever>
<Header>
<field1>abc<\field1>
<field2>1234<\field2>
<\Header>
<Detail>
<field3>nhj<\field3>
<field4>bshsrt<\field4>
<\Detail>
<\DT_Receiever>
We should do content conversion for the above structure using SFTP adapter at the receiver end.
Kindly provide us some tips in achieving the same.
Thanks
Suganya.

Hi Suganya,
You can use message tranform bean for ur case.
U have to use "StructXML2Plain"
Please follow below link for ur reference If you face any problem please let me know....
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/content.htm
Thanks,
Enivass

Data Conversion for Project Module

Dear all,
I have a requirement to perform data conversion for Project module from 11.5 to R12. I am new to this module. Can anybody can outline (or provide documentation reference):
1)Source tables in 11.5
2)Data Selection for source tables in 11.5
3)Validations need to be performed for data clean up
4)Interface tables and interface programs in R12
Thanks,
Sudip

See the following links for information on all R12 interfaces
Oracle Integration Repository Documentation Resources Release 12 (Doc ID 396116.1)
Note: 462586.1 - Where are the Oracle® Release 12 (R12) API Reference Guide?
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=462586.1
Note: 458225.1 - Release 12 Integration Repository
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=458225.1
If you are on 11i, go to irep.oracle.com
Hope this helps,
Sandeep Gandhi

Reg: Conversion for quantity

Similar Messages

Maybe you are looking for