Reg: convertion of char format to RAW.

hii all,
I am trying to convert the char data of length 22 to RAW16(output length 32) in the below manner.
data : ip type char22,
op type RAW16.
field-symbols: <ptr_y> type RAW16.
assign ip to <ptr_y> casting.
move <ptr_y> to op.
write : op.
am i doing the correct way,for converting? bcos i am not getting the output that is requried.
help me in this regards.
with regards,
sandeep akella.

Hi,
Uninterpreted byte stringis RAW. Fields of type RAW may have only a maximum length of 255 in tables.
Declare as String variable and move in to this variable.
Regards
Md.MahaboobKhan

Similar Messages

How to convert an internal table of char type to Raw (1022 char) format int

Hi All,
I am facing the problem while converting the character type internal table to Raw (1022 char) format internal table.
Example :
Source :
Internal table - Itab_send of type char132.
Target : ( Required )
Internal table - itab_receive of type SDOK_SDATX .
Note : SDOK_SDATX = Raw ( 1022 char )
Thank you,
Purshoth

Possible Solution : Move it to source character field to string and string to raw field.
try to find FM , go in se37 and *RAW *
RSAB_CONVERT_RAW_TO_CHAR convert raw to char.
Edited by: Harsh Bhalla on Dec 15, 2009 10:31 PM

Converting the char into date format?

Hi!!! Guru's
i am using std DS of SD 2LIS_11_VAITM, in that the date fields are in the the char format, so i wann show the difference of the to dates in Days into the report, can any body put some light on this thread.
wil assign pts for sure
thanks in adv
mohan

Hello,
I think u can achieve this at query level.
You can try variable with replacement path . In your scenario you will have to have 2 variables one for ex. 0SHIPDATE and another one for ex. 0GIDATE .
After that create formula ( Number of days ) of subtraction on this two variables .
Gimme ur mail-id , i will forward a doc on this if u want...
Regards,
SRIKANTH
Message was edited by:
KANTH SRI

Internal table data 1E2 automatically convert to scientific format

Dear all,
I have been searched for solution moths from the forums and tried all possible methods, but still no way to solve my above problem. I found a way to solve it partially for us, but may be very helpful for others who meet similly case like mine, so I posted here.
my problem is when I export my internal table data to Excel, the Cell data with 1E2 auto becomes 1.00E02, and 1E8 becomes 1.00E08, we need it to be 1E2 and 1E8 in excel.
you can recreate my problem by
1, input 1E2 into your Microsoft Excel, then Enter, it will auto change into scientific format. which is we do not want.
2, use any of your SAP system open any table as long as there is a Char (>3) field in that table. add some
data entry in that field in the form "any amount (<15) of numeric 1 to 9"E"any one or two numeric 1 to 9". such as, 123E2, 1234E12 etc. then save this table's data to local file spread sheet, or use any FM to download it to a Excel file, when you open this
file by Excel, the cell with above form will display as scientific. but
if you put three or more numeric after the "E", such as 123E123 it will
display correctly.
what I have done:
I searched in SCN for similar thread:
    Export to Excel 2007 - item number problem
    Exceding the limit of numbers in Excel at target side
    Excel download cell format problem
    Formating as Text in excel through SAP
    Converting of amount field into excel file through GUI DOWNLOAD
    Data downloaded to excel gets converted to exponential format.
    Problem with Excel download   and scientific number
    Re: Issue in displaying numbers in Excel?
    CSV Flat File Data Problem (Number converting to Scientific Notation)
Tested accordingly, But none of these works in our case. because our
ultimate receiver of email attachment will be external third party, we cannot ask
them to change anything in their Excel.
Search Microsoft help about Excel, http://support.microsoft.com/kb/214233,
and it says this "Automatic Number Formatting" is a normal behaviour of excel.
no way to turn it off, the "work-around" way that Microsoft provides is not suitable for our
case.
We test CL_iXML recently arrording to weblog http://wiki.sdn.sap.com/wiki/display/Snippets/FormattedExcelasEmailAttachment
it successful controled the format. so this could be a solution for others whose internal table size is small. but our 2MB internal table bocome 6MB when converted to xml file attachment, which cannot be received by our end user's mail box. too big.
So please advise your ideas.
Many thanks in advance!
Peter Ding
Thank you very much for your time!

Hi,
You can achieve this by describing the spreadsheet in XML with the help of the DOM classes.
The later releases of Excel can read and save spreadsheets as XML, providing your release supports this you can achieve it.
Check out the following Wiki
[Excel - XML|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/exporting%2bdata%2bto%2bexcel%2b-%2bxml%2bto%2bthe%2brescue]
Regards,
Darren

Comment faire pour convertir mes photos prises en RAW en JPEG?

Je photographie toujours en RAW; après les avoir traité avec Camera RAW, je voudrais les convertir en lot en format JPEG. Comment faire?

Merci encore c’est fait
De : MichelBParis [email protected]
Envoyé : 4 décembre 2013 12:54
À : Louis Lacasse
Objet : Comment faire pour convertir mes photos prises en RAW en JPEG?
Re: Comment faire pour convertir mes photos prises en RAW en JPEG?
created by MichelBParis <http://forums.adobe.com/people/MichelBParis> in Photoshop Elements - View the full discussion <http://forums.adobe.com/message/5900238#5900238

Need to convert to vector format.

I have a document with pictures. I need to convert it to vector format before sending to printer. Not sure how to do it. Using CS5. Is converting to outlines the same?

It must be difficult to convert from illustrator into a vector format since no one has a specific answer.
Soshagayle7,
There is no automagic "conversion" from a raster image to a vector graphic. The artwork represented by a raster image can be redrawn as vector artwork.
You can re-draw the artwork using the vector drawing tools in Illustrator or any similar program. You can even import the raster image and use it as a guide while "tracing" it with vector paths.
Or (and this is where the all-too-common misconception about "conversion" comes in)...
You can use the autotrace feature which exists in Illustrator or any similar program to try to automate the process of "tracing" the raster image with vector paths.
Either way, you end up with what would more accurately be called a "reinterpretation" of the subject, not a "conversion" of the raster image in the sense of "converting" one file format to another.
And that's the key. All that most current autotrace features (including the one in Illustrator) do is detect color differences between pixels of a raster image based upon a user-specified sensitivity setting, and then try to draw vector paths which follow along those detected differences. It's very much a garbage-in-garbage-out process.
And even when the "in" is not garbage, there is no real intelligence involved. The kind of autotrace algorithms in Illustrator and programs like it have no shape-recognition intelligence. For example, in the case of a human face, the autotrace feature doesn't know that the eyes' pupils are round; it just detects a region of similarly-colored pixels and tries to draw a path around them. Similarly, in the case of a geometric logo that obvously (to a human) is supposed to contain a perfect circle, the autotrace feature doesn't "see a circle"; it doesn't go and get the Ellipse tool and draw a circle that fits, as any human would do. Again, it just tries to follow around the regions of similarly-colored pixels.
But that sounds okay, right? Well think about it. Imagine turning the sensitivity of such an algorithm way up to the max. What's going to be the most accurate autotracing of a raster image? The mathematically "most accurate" result would be a perfect vector square for each and every pixel in the image. And the "vector advantage" of that would be absolutely nill. The resolution-independence reason for preferring vector paths would be rendered moot. Such a graphic would be entirely vector, but to absolutely no advantage regarding scaleability. (Thus my comment about the line drawn with a 1-pixel raster image.)
So the reason you haven't received an answer to the "how do I convert" question is because the same thing has been explained in this forum countless times, and to answer it correctly really requires a lengthy explanation (like this one) that tries to clear up the too-common misconception that autotracing is some kind of magic bullet for "converting" a raster image into a vector graphic in some kind of mathematically accurate way that then yields all the advantages of properly drawn vector graphics.
Autotracing is useful to those who understand when it's appropriate and why. But without seeing or at least knowing more about the actual raster image you are dealing with, advising whether it's appropriate in your case is nothing but a guess. Generally speaking, if the image in question is not already of high enough resolution at the size at which it will be printed, then it's probably also not of high enough resolution for good auto-tracing results. And if it is of sufficient resolution for the size at which it will be printed, then there's probably no reason it needs to be vector.
Bottom line: There's a good reason why vector graphics are preferred. But that means properly-drawn vector graphics. The best way to "convert" your raster image to a vector graphic is to re-draw it using the vector tools. The sometimes-acceptable but often sub-standard "cheat" for doing it is to import the graphic and apply the autotrace feature (called LiveTrace in Illustrator). It's use is explained in the online help.
Autotracing--the "conversoin" that such questions are almost always talking about--is not a lossless translation, like converting quarts to gallons or binary to hexidecimal. Entropy always rules. Anytime something is automatically "reprocessed" something is lost, not gained. You see that in everything from repainting a room over and over without removing the old paint, to taking photographs of photographs of photographs. Degradation occurs. You swap one kind of ugliness for another. That's autotracing when used inappropriately.
The drawing tools exist for a reason. If you really need vector paths, you should probably draw them.
JET

ALV output converted into PDF format and send that PDF to user through mail

Hi Experts,
I have report earlier its output was in alv grid.
Now i want that ALV output converted into PDF format.And that PDF output send to user through mail.
Can u please tell how to do?
My code is here(output is displaying in ALV grid).
INCLUDE <icon>.
TYPE-POOLS: slis, kkblo.
TABLES : zmsd_freight_hdr, zmsd_freight_det, zmsd_blinfo, zmsd_diheader.
TABLES : lfa1.
DATA : t_hdr   LIKE   zmsd_freight_hdr   OCCURS 0 WITH HEADER LINE,
       T_DET   LIKE   ZMSD_FREIGHT_DET   OCCURS 0 WITH HEADER LINE,
       t_bl    LIKE   zmsd_blinfo        OCCURS 0 WITH HEADER LINE,
       t_di    LIKE   zmsd_diheader      OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_det OCCURS 0.
        INCLUDE STRUCTURE zmsd_freight_det.
DATA    type(30).
DATA: END OF t_det.
DATA: v_target2(30),
      v_zsammg LIKE t_det-zsammg,
      v_gsttotal LIKE t_det-zamount.
DATA : BEGIN OF t_data OCCURS 0,
         zsammg       LIKE zmsd_freight_hdr-zsammg,
         zdidbl       LIKE zmsd_freight_hdr-zdidbl,
         zvkorg       LIKE zmsd_freight_hdr-zvkorg,
         zinvno       LIKE zmsd_freight_hdr-zinvno,
         zttlamt      LIKE zmsd_freight_hdr-zttlamt,
         zstatus      LIKE zmsd_freight_hdr-zstatus,
         ztype        LIKE zmsd_freight_hdr-ztype,
         zconfirm     LIKE zmsd_freight_hdr-zconfirm,
         zconfirmdate LIKE zmsd_freight_hdr-zconfirmdate,
         erdat        LIKE zmsd_freight_hdr-erdat,
         ernam        LIKE zmsd_freight_hdr-ernam,
         erzet        LIKE zmsd_freight_hdr-erzet,
         aedat(10),
         aenam        LIKE zmsd_freight_hdr-aenam,
         aezet        LIKE zmsd_freight_hdr-aezet,
         zline        LIKE zmsd_freight_det-zline,
         zfptype      LIKE zmsd_freight_det-zfptype,
         zchrcode     LIKE zmsd_freight_det-zchrcode,
         zcurcode     LIKE zmsd_freight_det-zcurcode,
         zqty         LIKE zmsd_freight_det-zqty,
         zuom         LIKE zmsd_freight_det-zuom,
         zrate        LIKE zmsd_freight_det-zrate,
         zamount      LIKE zmsd_freight_det-zamount,
         zexrate      LIKE zmsd_freight_det-zexrate,
       zccode       LIKE zmsd_blinfo-zccode,      "MADK991565
         zccode       like ZMSD_FREIGHT_HDR-zfcode, "MADK991565
         zbldate(10),
         zbl          LIKE zmsd_blinfo-zbl,
         type(3),
         waerk        LIKE zmsd_freight_det-zcurcode,
         zamountl     LIKE zmsd_freight_det-zamount,
       END OF t_data.
DATA : w_layout      TYPE   slis_layout_alv,
       w_catalog     TYPE   slis_fieldcat_alv,
       t_catalog     TYPE   slis_t_fieldcat_alv,
       w_sort        TYPE   slis_sortinfo_alv,
       t_sort        TYPE   slis_t_sortinfo_alv.
DATA   V_ZINVNO    like   T_HDR-ZINVNO.                   "MADK991565
DATA : v_count TYPE i.
SELECTION-SCREEN BEGIN OF BLOCK a0 WITH FRAME TITLE text-001.
PARAMETERS     : p_zvkorg LIKE zmsd_freight_hdr-zvkorg OBLIGATORY .
SELECT-OPTIONS : s_zdidbl FOR zmsd_freight_hdr-zdidbl             ,
                  s_zccode FOR lfa1-lifnr                          ,
                  s_status FOR zmsd_freight_hdr-zstatus            ,
                  s_ztype FOR zmsd_freight_hdr-ztype              ,
                  s_erdat FOR zmsd_freight_hdr-erdat              ,
                  s_ernam FOR zmsd_freight_hdr-ernam              ,
                  s_zconfd FOR zmsd_freight_hdr-zconfirmdate       .
PARAMETERS     : p_zconf AS   CHECKBOX                            .
SELECTION-SCREEN END OF BLOCK a0.
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-002.
PARAMETERS     : p_hdr    RADIOBUTTON GROUP rad DEFAULT 'X'        ,
                  p_det    RADIOBUTTON GROUP rad                    .
SELECTION-SCREEN END OF BLOCK a1.
INITIALIZATION.
AT SELECTION-SCREEN.
START-OF-SELECTION.
PERFORM get_data.
PERFORM process.
PERFORM display.
END-OF-SELECTION.
PERFORM fm_get_num_pages.
AT USER-COMMAND.
AT LINE-SELECTION.
TOP-OF-PAGE.
PERFORM fm_top_of_page USING '7010' sy-title space.
FORM get_data.
SELECT   *
    FROM   zmsd_freight_hdr
    INTO   TABLE t_hdr
   WHERE   zvkorg        EQ p_zvkorg
     AND   zdidbl        IN s_zdidbl
     AND   zstatus       IN s_status
     AND   ztype         IN s_ztype
     AND   erdat         IN s_erdat
     AND   ernam         IN s_ernam
     AND   zconfirmdate IN s_zconfd
     AND   ZFCODE        IN S_ZCCODE.                      "MADK991565
IF p_zconf = 'X'.
    DELETE t_hdr WHERE zconfirm NE 'C'.
ENDIF.
CHECK NOT t_hdr[] IS INITIAL.
SELECT   *
    FROM   zmsd_blinfo
    INTO   TABLE t_bl
     FOR   ALL ENTRIES IN t_hdr
   WHERE   zsammg = t_hdr-zsammg.
SORT t_bl BY zsammg.
SELECT   *
    FROM   zmsd_diheader
    INTO   TABLE t_di
     FOR   ALL ENTRIES IN t_hdr
   WHERE   zsammg = t_hdr-zsammg.
SORT t_di BY zsammg.
IF P_DET = 'X'. "MADK933361
SELECT   *
    FROM   zmsd_freight_det
    INTO   TABLE t_det
     FOR   ALL ENTRIES IN t_hdr
   WHERE   zsammg = t_hdr-zsammg
   AND ZINVNO = T_HDR-ZINVNO .                           "MADK991565
SORT t_det BY zsammg zline.                            "MADK991565
   SORT T_DET BY ZSAMMG ZINVNO ZLINE.                     "MADK991565
ENDIF. "MADK933361
ENDFORM.
FORM process.
REFRESH t_data.
CLEAR v_gsttotal.                                         "MADK933361
LOOP AT t_hdr.
Start of MADK933361
    CLEAR: v_target2.
    v_zsammg = t_hdr-zsammg.
    V_ZINVNO = T_HDR-ZINVNO.                                "MADK991565
   AT NEW zsammg.                                         "MADK991565
     AT NEW ZINVNO.                                         "MADK991565
      PERFORM get_gst_value.
    ENDAT.
End of MADK933361
    PERFORM move_header.
    CHECK t_data-zccode IN s_zccode.
    IF p_det = 'X'.
CSF Project Changes Starts   DEV34    MADK985782
    LOOP AT T_DET WHERE ZSAMMG = T_HDR-ZSAMMG..
      LOOP AT t_det WHERE zsammg = t_hdr-zsammg AND
                          zinvno = t_hdr-zinvno.
CSF Project Changes Ends     DEV34    MADK985782
        PERFORM move_header.
        CHECK t_data-zccode IN s_zccode.
        MOVE-CORRESPONDING t_det TO t_data.
        t_data-zamountl = t_data-zamount * t_data-zexrate.
        APPEND t_data.
        CLEAR t_data.
      ENDLOOP.
    ELSE.
      APPEND t_data.
      CLEAR t_data.
    ENDIF.
    AT END OF zsammg.
      CLEAR v_gsttotal.
    ENDAT.
*Start of changes for IS090901289-PIA MADK991565
    AT END OF ZINVNO.
      CLEAR V_GSTTOTAL.
    ENDAT.
*End of changes for IS090901289-PIA MADK991565
ENDLOOP.
ENDFORM.
FORM move_header.
MOVE-CORRESPONDING t_hdr TO t_data.
t_data-zttlamt = t_data-zttlamt + v_gsttotal.             "MADK933361
t_data-waerk = 'SGD'.
IF NOT t_hdr-aedat IS INITIAL.
    WRITE: t_hdr-aedat TO t_data-aedat.
ELSE.
    CLEAR : t_data-aedat.
ENDIF.
READ TABLE t_bl WITH KEY zsammg = t_hdr-zsammg BINARY SEARCH.
IF sy-subrc EQ 0.
t_data-zccode = t_bl-zccode.   "MADK991565
    T_DATA-ZCCODE = T_HDR-ZFCODE.   "MADK991565
    IF NOT t_bl-zbldate IS INITIAL.
      WRITE: t_bl-zbldate TO t_data-zbldate.
    ENDIF.
    t_data-zbl     = t_bl-zbl.
    t_data-type    = 'DBL'.
ELSE.
    READ TABLE t_di WITH KEY zsammg = t_hdr-zsammg BINARY SEARCH.
    IF sy-subrc EQ 0.
    t_data-zccode = t_di-zdiforcode.     "MADK991565
      T_DATA-ZCCODE = T_HDR-ZFCODE.         "MADK991565
      t_data-type    = 'DI'.
    ENDIF.
ENDIF.
ENDFORM.
FORM display.
IF t_data[] IS INITIAL.
    MESSAGE s398(00) WITH 'No Data Selected'.
    EXIT.
ENDIF.
DATA : l_repid LIKE sy-repid.
l_repid = sy-repid.
REFRESH t_catalog.
CLEAR   t_catalog.
w_layout-cell_merge = 'X'.
PERFORM map_fields.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            i_callback_program      = l_repid
            i_callback_user_command = 'ALV_USER_COMMAND'
            is_layout               = w_layout
            it_fieldcat             = t_catalog[]
            i_grid_title            = sy-title
            i_save                  = 'A'
            it_sort                 = t_sort[]
       TABLES
            t_outtab                = t_data
       EXCEPTIONS
            program_error           = 1
            OTHERS                  = 2.
IF sy-subrc <> 0.
ENDIF.
ENDFORM.
FORM map_fields.
Sort Order
CLEAR v_count.
PERFORM sf USING 'ZDIDBL'   'X' 'X'.
Fields to be displayed
CLEAR v_count.
IF p_hdr = 'X'.
    PERFORM af USING :
   DESCRIPTION       FIELD        LEN   RTABLE             RFIELD
    'DI/DBL         ' 'ZDIDBL'     '14' '                ' '        ',
    'Type           ' 'TYPE'       '04' '                ' '        ',
    'Forwarder Code ' 'ZCCODE'     '14' '                ' '        ',
    'BL Number      ' 'ZBL'        '14' '                ' '        ',
    'BL Date        ' 'ZBLDATE'    '10' '                ' '        ',
    'Invoice Number ' 'ZINVNO'     '15' '                ' '        ',
    'Extraction     ' 'ZSTATUS'    '05' 'ZMSD_FREIGHT_HDR' 'ZSTATUS ',
    'Freight Type   ' 'ZTYPE'      '05' 'ZMSD_FREIGHT_HDR' 'ZTYPE   ',
    'Confirmation   ' 'ZCONFIRM'   '05' 'ZMSD_FREIGHT_HDR' 'ZCONFIRM',
    'Confirm Date   ' 'ZCONFIRMDATE' '10' 'ZMSD_FREIGHT_HDR'
'ZCONFIRMDATE',
    'Total Amount   ' 'ZTTLAMT'    '18' '                ' '        ',
    'Created On     ' 'ERDAT'      '10' '                ' '        ',
    'Created By     ' 'ERNAM'      '10' '                ' '        ',
    'Changed On     ' 'AEDAT'      '10' '                ' '        ',
    'Changed By     ' 'AENAM'      '10' '                ' '        '.
ELSE.
    PERFORM af USING :
   DESCRIPTION         FIELD     LEN   RTABLE             RFIELD
    'DI/DBL           ' 'ZDIDBL'   '14' '                ' '        ',
    'Type             ' 'TYPE'     '04' '                ' '        ',
    'Forwarder Code   ' 'ZCCODE'   '14' '                ' '        ',
    'BL Number        ' 'ZBL'      '14' '                ' '        ',
    'BL Date          ' 'ZBLDATE' '10' '                ' '        ',
    'Invoice Number   ' 'ZINVNO'   '15' '                ' '        ',
    'Extraction       ' 'ZSTATUS' '05' 'ZMSD_FREIGHT_HDR' 'ZSTATUS ',
    'Freight Type     ' 'ZTYPE'    '05' 'ZMSD_FREIGHT_HDR' 'ZTYPE   ',
    'Confirmation     ' 'ZCONFIRM' '05' 'ZMSD_FREIGHT_HDR' 'ZCONFIRM',
    'Confirm Date     ' 'ZCONFIRMDATE' '10' 'ZMSD_FREIGHT_HDR'
'ZCONFIRMDATE',
    'Total Amount     ' 'ZTTLAMT' '18' '                ' '        ',
    'Freight Payment ' 'ZFPTYPE' '14' '                ' '        ',
    'Charge Code      ' 'ZCHRCODE' '10' '                ' '        ',
    'Currency         ' 'ZCURCODE' '08' '                ' '        ',
    'Quantity         ' 'ZQTY'     '13' '                ' '        ',
    'UoM              ' 'ZUOM'     '04' '                ' '        ',
    'Rate             ' 'ZRATE'    '15' '                ' '        ',
    'Amt(Foreign Curr)' 'ZAMOUNT' '16' '                ' '        ',
    'Exchange Rate    ' 'ZEXRATE' '13' '                ' '        ',
    'Amt(Local Curr) ' 'ZAMOUNTL' '16' '                ' '        ',
    'Created On       ' 'ERDAT'    '10' '                ' '        ',
    'Created By       ' 'ERNAM'    '10' '                ' '        ',
    'Changed On       ' 'AEDAT'    '10' '                ' '        ',
    'Changed By       ' 'AENAM'    '10' '                ' '        '.
ENDIF.
ENDFORM.
FORM af USING text
              field
              len
              table
              reffield.
v_count = v_count + 1.
w_catalog-col_pos       = v_count.
w_catalog-fieldname     = field.
w_catalog-ref_tabname   = table.
w_catalog-ref_fieldname = reffield.
w_catalog-seltext_s     = text.
w_catalog-seltext_m     = text.
w_catalog-seltext_l     = text.
w_catalog-outputlen     = len.
IF field = 'ZTTLAMT' OR field = 'ZAMOUNTL'.
    w_catalog-no_zero     = 'X'.
    w_catalog-cfieldname = 'WAERK'.
    w_catalog-datatype    = 'CURR'.
ENDIF.
IF FIELD = 'ZRATE' OR FIELD = 'ZAMOUNT'.
IF field = 'ZAMOUNT'.
    w_catalog-no_zero     = 'X'.
    w_catalog-cfieldname = 'ZCURCODE'.
    w_catalog-datatype    = 'CURR'.
ENDIF.
IF field = 'ZQTY' OR field = 'ZRATE'.
    w_catalog-no_zero     = 'X'.
    w_catalog-datatype = 'DEC'.
ENDIF.
APPEND w_catalog TO t_catalog.
CLEAR w_catalog.
ENDFORM.
FORM sf    USING   fieldname sortup group.
v_count = v_count + 1.
CLEAR w_sort.
w_sort-fieldname = fieldname.
w_sort-spos      = v_count.
w_sort-up        = sortup.
w_sort-group     = group.
APPEND w_sort TO t_sort.
ENDFORM.
FORM alv_user_command USING in_ucomm    LIKE sy-ucomm
                             in_selfield TYPE slis_selfield.
DATA: lfs_data LIKE t_data.
IF in_ucomm = '&IC1'.
    READ TABLE t_data INDEX in_selfield-tabindex INTO lfs_data.
    CHECK NOT lfs_data-zdidbl IS INITIAL.
    IF lfs_data-type = 'DBL'.
      DATA: l_zdbl LIKE zmsd_diheader-zdinum.
      l_zdbl = in_selfield-value.
      EXPORT l_zdbl TO MEMORY ID 'VBL'.
      CALL TRANSACTION 'ZMSD_BL01'.
    ENDIF.
    IF lfs_data-type = 'DI'.
      DATA: v_dinum LIKE zmsd_diheader-zdinum.
      v_dinum = in_selfield-value.
      EXPORT v_dinum TO MEMORY ID 'VDI'.
      CALL TRANSACTION 'ZMSD_DI01'.
    ENDIF.
ENDIF.
ENDFORM.
FORM get_gst_value.
LOOP AT t_det WHERE zsammg = v_zsammg
     AND ZINVNO = V_ZINVNO.                              "MADK991565
    CHECK t_data-zccode IN s_zccode.
    t_det-zamount = t_det-zamount * t_det-zexrate.
    SELECT SINGLE y0mmtarget2
            INTO   v_target2
            FROM   y0mmipstranslate
            WHERE y0mmdatatype = '70' AND
                   y0mmsource = t_det-zchrcode.
    SELECT SINGLE y0mmtarget1
           INTO   t_det-type
           FROM   y0mmipstranslate
           WHERE y0mmdatatype = '76' AND
                  y0mmsource = v_target2.
    IF t_det-type NE '3Z'.
      v_gsttotal    = v_gsttotal +
                           ( t_det-zamount * 5 / 100 ).
    ENDIF.
ENDLOOP.
Regards,
Raj.

Hello,
Following is the procedure to convert alv output to spool and then it to PDF Format.
After we display the ALV, we can check whether it is running in the background using system field u2018sy-batchu2018. Then,we call an function module named u2018GET_JOB_RUNTIME_INFOu2019 to get the current job information. Then go to spool request table tbtcp to get the spool id.
Get current job details
CALL FUNCTION u2018GET_JOB_RUNTIME_INFOu2019
       IMPORTING
            eventid                 = gd_eventid
            eventparm               = gd_eventparm
            external_program_active = gd_external_program_active
            jobcount                = gd_jobcount
            jobname                 = gd_jobname
            stepcount               = gd_stepcount
       EXCEPTIONS
            no_runtime_info         = 1
            OTHERS                  = 2.
SELECT * FROM tbtcp
                 INTO TABLE it_tbtcp
                 WHERE      jobname     = gd_jobname
                           AND jobcount = gd_jobcount
                           AND stepcount = gd_stepcount
                           AND listident <> u20180000000000u2032
                           ORDER BY   jobname
                                               jobcount
                                               stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
Finally, we can call function module u2018CONVERT_ABAPSPOOLJOB_2_PDFu2018 to convert spool reqeust(which is stored in OTF format) to PDF format. Then we can call either function module u2018SO_DOCUMENT_SEND_API1u2032 or SAP BCS (Business Communication Service) to send the pdf as an email attachment.
CALL FUNCTION u2018CONVERT_ABAPSPOOLJOB_2_PDFu2019
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount = gd_bytecount
       TABLES
            pdf = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            OTHERS                   = 12.
Regards,
Sayali
Edited by: Sayali Paradkar on Apr 20, 2010 12:51 PM

Good day! On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09 When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Un

Good day!
On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09
When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Unable to process the document in the module Save As. File not created"

Hi,
Was it working fine for you before?
Is it with some specific documents?
Are you able to convert the word/excel files to pdf?
Regards,
Rave

Good day!   On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09 When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Una

Good day!
On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09
When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Unable to process the document in the module Save As. File not created"

This happens with any file .
Send a file with the screen errors and system data . Also send a couple of files PDF.
Translates only txt format.
Acrobat установлен: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:43:46
Браузер по умолчанию:
Версия BIOS: _ASUS_ - 1072009
Версия ОС: 6.2.9200
Всего виртуальной памяти: 4194176 KB
Всего физической памяти: 4077252 KB
Графическая плата: Intel(R) HD Graphics 4000
    Версия: 10.18.10.3412
    Отметить: Не поддерживается
Доступная виртуальная память: 3638168 KB
Доступная физическая память: 1689940 KB
Имя пользователя: Vazgen
Имя системы: VAZGENTAICHI
Монитор:
    Название: Intel(R) HD Graphics 4000
    Разрешение: 1920 x 1080 x 60
    Бит на пиксел: 32
Название ОС: Microsoft Windows Vista
Папка Windows: C:\WINDOWS
Папка для временных файлов: C:\Users\Vazgen\AppData\Local\Temp\
Почтовая программа по умолчанию: Microsoft Outlook
    mapi32.dll
    Версия: 1.0.2536.0 (winblue_rtm.130821-1623)
Производитель ОС: Microsoft Corporation
Процессор: Intel64 Family 6 Model 58 Stepping 9 GenuineIntel ~1696 Mhz
Сведения о Windows:
   Планшетный ПК: Да
   Начальная версия: Нет
   Media Center Edition: Нет
   Медленный компьютер: Нет
Сведения о сеансе:
   Тип загрузки: Обычный
   Завершение работы: Нет
   Сеть: Доступно
   Внутри Citrix: Нет
   Внутри VMWare: Нет
   Удаленный сеанс: Нет
   Удаленное управление: Нет
   Использование JAWS: Нет
   Использование Windows-Eyes: Нет
   Использование NVDA: Нет
Сведения об Acrobat:
   Изолирование программной среды: Отключить
   Связанная программа для чтения: Нет
   Multi-Reader с поддержкой Desktop: Отключить
Сведения об отображении:
   Ширина экрана: 1920
   Высота экрана: 1080
   Число мониторов: 2
   Число кнопок мыши: 2
   Мышь с колесом прокрутки: Нет
   С маркером Windows: Нет
   Двухбайтовая кодировка: Нет
   С редактором метода ввода: Да
   В программе для чтения с экрана: Нет
Сведения об учетной записи:
   Права пользователя: Администратор
   Управление учетной записью пользователя: Ограниченное
   Целостность процесса: Не определено
   Тип профиля: Отсутствует
Установленные приложения:
   Версия Office: Office 2013 32-bit
Файл подкачки: 4194303 KB
Часовой пояс: Московское время (зима)
Язык: Русский (Россия)
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Accessibility.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:20
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Annots.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:22
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\IA32.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:18
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\PaperCapture.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:43:36
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\SaveAsRTF.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:20
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\SendMail.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:20
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Updater.api
    Версия: 11.0.9.29
Дата создания: 2014/09/12
    Время создания: 13:44:22

How can i convert a char[] to String?

Hi all!,
What would be the easiest way to convert a char[] to a String? Im trying to set the text of a JTextArea which takes a String as an arguement but i have a character arry that if filled from a FileReader. Any suggestions?
Thanks.

The easiest way would be new String(charArray). There's a version of the constructor in the String class that take a char array

Use of "PSA in Char format" option in data source

Hi,
When I am looking in to the datasource in SAP BW, I have seen the option "PSA in Char format",what is the differnce between the data loading into the PSA with char format or with typed structure.
Are we not able to correct data in the PSA if we have not selected that option ?

Hi Rahul,
Please check Point no 2 in the below link:
http://help.sap.com/saphelp_nw73/helpdata/en/4a/1be8b2aece044fe10000000a421937/content.htm.
You will be able to do it.
Thanks and Regards,
MuraliManohar

How to convert any date format?

Hi,
In the BPEL process I am getting the input in 'DD-MON-YYYY' format, I want to convert it to 'DD-MM-YYYY' format.
The function xp20:formatDateTime('string', 'image') expecting the string to be in 'YYYY-MM-DD' format. and the 'image' can be set to any format.
So i am able to convert to any format if I have the input string in 'YYYY-MM-DD' format, if I get in different format then how do I change them to required format?
--Khaleel

Looks like you are sending the date in Oracle format. If the date is created by a DB adapter the date should be formated in the correct format for BPEL to format (YYYY-MM-DDTHH:MI:SS). To make sure this happensyour xml needs to be the date data type and the value sent maust be a date not a string, if it is a string use the to_date to make it a date field.
You are correct once it is in the YYYY-MM-DD format you can change to any format.
cheers
James

It takes 11 hours to convert to flv format from Quicktime

I edited a DV movie from camera using FCP and one hour final movie after adding all animations and effects in .mov format which was about 12 GB takes about 11 hours to be converted to flv format is this usual or I need to do some thing.
My system configuration is
Power PC G5
3500 MB RAM
1.1 TB hard disk.
I used Marcromedia Flash Encoder
OS Mac OS X 10.5.8
is there some thing that can be done to shorten the time as the compressor of FCP wont submit batch.That is an error I am getting in it.
http://support.apple.com/kb/TA47672?viewlocale=en_US
and any of the solution suggested above does not seems to work.
This post is not about compressor problem I had asked that on another thread
http://discussions.apple.com/thread.jspa?threadID=2374397&tstart=0
but it says to install an old OS which is not some thing logical I feel to be able to use compressor I wont be downgrading my OS.
What I want to know is to be able to convert to flv from .mov format so much time is it a usual thing or some thing can be done to shorten it.

That's what I meant. You just need a good compression codec.
Can you help to identify or let me know a few codecs I will try.
Is FLV the only resource you streaming server will use?
Yes it has to be flv.The decision is not in my hands it will be a Linux Server so if you are aware of any better file format let me know.I can suggest.
You can use hardware compression systems to go directly to several different >low grade codecs but I've never used them.
I do not have any such hardware but anyways
thanks for this suggestion.

Is there any function module to convert the date format

Dear ABAPers,
Is there any function module to convert the date format from dd.mm.yyyy to dd-mmm-yyyy.
       I want to convert the date format from dd.mm.yyy to dd.mmm.yyy Eg.from 10.03.2008 to 10-mar-2009.
Thanks & Regards,
Ashok.

hi,
create custom function module or copy the below code in the report ..and use it
the out put for below is :----Convert a DATE field into a full format date eg. March 23, 2000
FUNCTION Z_CONVERT_DATE_INTO_FULL_DATE.
""Local interface:
*"       IMPORTING
*"             VALUE(DATE) LIKE SY-DATUM
*"       EXPORTING
*"             VALUE(FORMATTED_DATE)
*"       EXCEPTIONS
*"              INVALID_DATE
TABLES: TTDTG.
DATA: BEGIN OF T_DATE,
        YYYY(4) TYPE C,
        MM(2) TYPE C,
        DD(2) TYPE C,
      END OF T_DATE.
DATA: DAY(3) TYPE N.
DATA: VARNAME LIKE TTDTG-VARNAME.
IF DATE IS INITIAL.
CLEAR FORMATTED_DATE.
EXIT.
ENDIF.
check document date format
CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
EXPORTING
    DATE = DATE
EXCEPTIONS
    PLAUSIBILITY_CHECK_FAILED = 1.
IF SY-SUBRC NE 0.
RAISE INVALID_DATE.
ENDIF.
MOVE DATE TO T_DATE.
CONCATENATE '%%SAPSCRIPT_MMM_' T_DATE-MM INTO VARNAME.
SELECT SINGLE * FROM TTDTG WHERE SPRAS = 'EN' AND VARNAME = VARNAME.
WRITE T_DATE-DD TO DAY.
CONCATENATE DAY ',' INTO DAY.
CONCATENATE TTDTG-VARVALUE DAY T_DATE-YYYY INTO FORMATTED_DATE
SEPARATED BY SPACE.
ENDFUNCTION.
the output is :--Convert a DATE field into a full format date eg. March 23, 2000
Regards,
Prabhudas

How to convert any date format to default US format using javascript???

Hi,
I was trying to convert a date format to default US date format. The date format will vary according to different regions (It can be dd/MM/yyyy or MM/dd/yyyy or yyyy/dd/MM or any). I need to convert it in to MM/dd/yyyy always (US Format). Please give some
solutions for the same.
Warm Regards,
Tony Joy

hi
it is not trivial task in common case. We faced with similar issue when tried to localize date times in display templates in Sharepoint 2013 depending on site's locale, which can be done only via javascript. In order to do it you need to add date time locale
information from server side to client side, e.g. by defining global variable. See the following article for details:
Localize datetimes in display templates in Content by search web parts in Sharepoint 2013. I extended OTB global object _spPageContextInfo with new property (as far as I remember this object is also available in Sharepoint 2010):
<script type="text/javascript">
jQuery(function() {
if (typeof (_spPageContextInfo) != "undefined" &&
_spPageContextInfo != null) {
<%
var ci = new CultureInfo(1033);
var cultureSerialized = new JavaScriptSerializer().Serialize(
new
name = ci.Name,
dateTimeFormat = ci.DateTimeFormat,
numberFormat = ci.NumberFormat
%>
_spPageContextInfo.currentCultureSerialized = <%= cultureSerialized %>;
</script>
Having different date time formats for your locale, you may use
Date.localeFormat function from MS Ajax for formatting the date in specific format. If in your case format is predefined you may hardcode it without adding DateTime formats from server side.
Blog - http://sadomovalex.blogspot.com
Dynamic CAML queries via C# - http://camlex.codeplex.com

Reg: convertion of char format to RAW.

Similar Messages

Maybe you are looking for