Reg : Credit management upload

Hi All,
Can we haev any BAPI related to the uploading of the credit mangement details?
Could please let me know the transaction for credit management?
Regards
Abhilash.

The following thread might be related to what you are looking at:
Re: Change terms of payment and credit limit
~Ian

Similar Messages

This is reg credit management

this is regarding credit management.
the requirement is there are 4 line items in the order.
now if i want to take into consideration the first 2 line items only for credit check. the remaining line items r not to be taken for credit check
how i can configure this can any one tell me

Hi,
You van do this by taking into acount the line item number..
Or you could also have a flag for the line item for your reg credit management.
You could then build a mask specifying the condition based on the flag or the line item number.
The items in the mask are to be taken for reg credit management.
Regards,
Tanveer.
<b>Please mark helpful answers</b>

Reg: credit management

Dear Friends,
In the credit management, is there any option that open item of 2006 will not be considered?That means open billing document which is not posted to accounts is exist,but the client wants it should not be considered.
Regards,
Trinath

hello, friend.
in OVA8, you can choose the horizon to specify a time period beyond which sales orders are not included in check. however, i currently don't have the info whether you can specify the same for billing documents.
regards.

Reg Credit Management fd33

Hi,
in fd33 there is a field credit exposure if we want get break ups for that how its possible .
Thanks

Credit Exposure = Open sales + Open Delivery + Open Billing + AR + Special Liab.
AR and Special Liab. is available in FD33 and other values can be obtained by clicking
Extras > Sales Value and you will get the value for the rest of the items.
Hope this helps.

Credit Management Approval-Reg

Hi,
I am in a implementation of SD. where in we have credit management is activated. Here the requirement is like as follows:
Client Wanted the three approval Hierarchy Like Credit Control Manager, Finance Manager & Managing Director.
These three levels will have the certain limit. Like Over all limit to Customer is
$ 20000/-
Credit Control Manager : $5000
Finance Manager : $5001 to $15000
Managing Director:$15001 t0 $20000
Can we have the above mentioned way to know the appoval process for Credit limits.Can any one list and provide the solution to my requirement.
Thanks & Regards
Srinivasa Rao P

Have a same requirement. Keeping myself posted on this thread. Thnks!

Credit Management with Letter of Credit.

Hi Gurus,
We need to consider the "Letter of Credit" amout in credit management.
ie. if there is LC created on customer worth Rs. 5lacs, system should not block the sales order unless 5 lacs is consumed.
Pls suggest any workarounds.
Reg.
Amol

Dear Amol Tamhane,
Have not worked on 'letter of credit'.
But if there is any accounting document which gets created due to letter of credit, then you can use the exit for credit management in SALES ORDER LEVEL and write the code to BLOCK THE SALES ORDER ONLY IF
(CREDIT LIMIT + LETTER OF CREDIT AMOUNT ) - (PREVIOUS EXPOSURE + SALES ORDER VALUE ) < 0
You can check BSEG, if accounting document gets created for 'letter of credit' or you can check any tables related to letter of credit based on customer code.
Thanks & Regards,
Hegal K Charles

Credit Management - Check for Item Payer

Hi All,
Credit management is checked at header payer level. For cleint requiremnt , we want this check for Item payers.
Is there any possibility for the same.
Thanks in advance
Regs
Madhu

Hi,
The credit check will happen with the credit account which you maintain in FD32, it can be any partner function. But, in standard SAP it happens for a sold-to-party.. which means we normally maintain SP as a credit account in FD32.. and logically it's the right way..
Now, coming to your query.. if you maintain the credit account for the payer then system will perform the credit check for that payer only.. it doesn't matter if it is maintained at header level or item level.
Hope this will clear your doubt along with the problem.
Do let me know.
Hrishi

Dun & Bradstreet credit management functionality

Hello experts,
My client wants to use Dun & Bradstreet credit management functionality, we are currently on SAP version 4.7 highest support pack SAP_APPL SAPKH47025.
How can I find out more about this product?
How much does it cost?
Where in SAP service marketplace should I request this?
How to go about implementing?
etc
Kind regards Steve D

Dun & Bradstreet, D&B as they are known are a credit agency.
They rate Companies. They review the Company Accounts, turnover, way the pay and produce credit limit recommendations.
You would need to contac them as to their cost.
How can you use them in SAP?
Well you can have an online facility where you down load their data and upload it to credit masters, FD32. Normally here you will need their DUNS number linked to a credit master and it will update the credit score and potentially the risk category.
As you have 4.7, you could chose to go with FSCM and the Credit Management processes that offers. it has a different link into D&B but you need to work out if the scoring you use for C/L creation, approval and change is just from D&B or internal rules are used as well.
lastly you need to consider if you will apply to the D&B on an adhoc basis, customer by Customer which is cheaper than them feeding you the data everytime they change their ratings.
please award points if useful.

Risk category field is missing in dso for 0fiar_o09 credit management.

Hi BI Experts,
I am using the standard extractor for the credit management dso 0fiar_o09. The field for risk category originates from our R3 system in table knkk-ctplc. It displays correctly in the psa. The transformation rsds 0fi_ar_9 maps it to 0risk_categ. It appears as an infoObject in the infoSource. The trcs transformation maps the rule also.
However, when I try to display the data in the dso, the risk category field does not display at all.
Please help with any possible suggestions to display the missing field.
Kind regards,
Cheryl Adamonis

I resolved this issue by removing the check in the 'attribute only' selection on the general tab of the infoObject.

Letter of Credit functionality and Credit Management

Hi,
we want to use Letter of Credit functionality for exports.
Currently, we have an ERP system that contains the sales data. In a separate system we have the credit management functionality (Financial Supply Chain Mgt - FSCM).
When order is created, the credit limit is checked in the FSCM system (via PI messages).
Now, we want to link some of the Sales orders with Letter of Credit. I believe, this is standard functionality in GTS.
So when Sales Order is created a LOC should be connected to this.
Can the GTS be connected also to FSCM credit management, so credit limit is not affected?
Example:
Sales Order value: 1 Mio USD
10% down-payment > this would be in the credit exposure visible (net exposure).
90 % covered through LOC > credit exposure should showing this, or it shows order value and in a negative figure this amount deducted so no effect on exposure.
Down-payment has no relation to LOC. When money is received for this the net exposure of the sales order is 0.
partial invoice: 0.4 Mio USD > it should be possible to link this invoice to the LOC. The posting FI document should have some LOC information, so when payment comes in the amount in LOC is reduced as well as in credit management this open.
Final invoice 0.5 USD: as above, all values go out from exposure if there are any.
A second case would be guarantees, where there is no reduction of values. This would stay same.
Anyone who can advise a solution here?
Thanks + Regards
Hein

Letter Of Credit can be used as a standard solution of SAP GTS with ERP solution. Yes you can connect both SAP & no SAP systems with GTS, but plugins, PI etc needs to be built in. But it would not be real time like RFC works. There are some standard available which needs to be hard coded to meet specific requirements.
Connecting LOC to Sales Order, invoice etc, is manual, based on business specific parameters and it comes standard with SAP GTS. Maintaining Values & Quantity of LOC based on actual LOC from bank is also possible. The depreciation of values & quantities is also standard with in LOC in GTS.
You can also setup various communication methods for LOC.
I think when Invoice is raised and payment is received the LOC should be closed in the system. There can also be other scenarios where in system determines LOC based on predefined logics for determination strategy put in to the GTS system.
Cheers,
Abir

Open Sales Order Values in Credit Managment

Hi,
1. I want to include the open sales orders that were created before implementing the functionality of Credit Managment. How to check the credit limits for that sales orders.
Fro Example. If i want do the credit checks for 1000 open sales orders.
2. How to reset the customer credit limit in FD32. I tried using the t.code f.28, but it will not be reset to zero(0).
Thank you,
Ravi

Hello Ravi,
You can try this: in table VBAK, you might have the date when this a particular order was created( ERDAT or sometihng like that..). You'll have to join table VBAK/VBAP/VBRK(billing table)/VBFA and the logic should be that the program should pick up all the orders created before 1 yr and should also check that the items are not rejected, and the delivery not yet created.
Check the following fields:
VBAK-ERDAT, VBAP-ERDAT, VBAP-ABGRU, VBAP-AEDAT.
Regards,
Raghu.

Open Delivery value update error in credit management

Hi
We have credit management active at delivery level. The value of open deliveries is not getting updated correctly for items with material substitution (material determination). For all other items, its getting updated correctly.
E.g Let say the credit limit set in FD32 is 10000 and the credit limit used % is 98 and the credit exposure value is 9800.
Now when I create an order with qty 10 for mat A, it creates a sub item B due to material determination and the value of the item is Rs.1200. In our system, the sub item with TAPS item category is relevant for pricing.
Then I create a delivery in VL01N and save it.
Now if i check in FD33, the credit limit used should be 101% and the credit exposure value should be 11000, but its not updating the open delivery value correctly. Its not considering the value of the new delivery.
However, If I add a normal item (TAN) in the same sales order and create a delivery for that item and save it, its updating the credit exposure based on the value of the normal item in the delivery correctly.
How to make the system update the open delivery values correctly by taking the items with material determination also into account.??
Please advise if any specific settings need to be done.
Regards
Madhu

Hi,
the system updates open values for credit management. These are:
Open sales order credit value (S066-OEIKW)
Open delivery credit value (S067-OLIKW)
Open billing document credit value (S067-OFAKW)
The system updates the open values in standard SIS structures S066 and S067. Technically, the structures are transparent tables. You can display the contents using transaction SE16 or using table maintenance.
The S067-OLIKW will give the open delivery credit values credit.Check in you system whether this table is updated with the delivery values for the credit account(customer number)
RVKRED77 u2013 Reorganize SD credit data
When updating errors occur, it enables you to reorganize the open credit, delivery and billing document values.
If the table is not updated run this report in background.
Regards,
Saju.S

Outbound IDOC for Credit Management

HI All,
We need to send the Credit management data from SAP to other system. For that we require Standard IDOC, could you please suggest the standard IDOC available for the same and how to configure it. Please let me know if we have any standard program which generates the IDOC for my requirement.
Regards,
Phanindra

Thanks for the Input, could you please let me know how we trigger this IDOC. Is it through configuration or any standard program which will generate idocs.

Customer complaint and credit management

Hi,
we have the following business case, credit management activated:
1. a customer has a complain about a delivery (e.g. poor quality/wrong material)
2. the corresponding invoice is shown as an open item in FBL5N
3. a credit note request is created for the sales order, but it can take weeks until it gets released. In the meantime the customer becomes overdue.
4. now the following happens: when the customer wants to place a new order he will be blocked by the credit management.
We first have to release him e.g. via VKM4. The same with deliveries.
Is there a possibility to mark the invoice in question as not relevant for the credit management?
My first idea was to change the credit note requests as relevant for the credit management (VOV8), but unfortunately those requests are not visible in FBL5N. Thus we would loose the overview of invoices in question.
Thanks for your answers...
Cheers,
Marc

hello, PP.
i don't have an answer yet. actually, i will add to your question.
a credit memo request is supposed to be not relevant for delivery. so why is this updating open delivery value? maybe it's SAP standard? maybe credit group 03 (delivery docs) was assigned to the credit memo request doc type? if so, why assign credit management to credit memo requests anyway?
regards.

Credit Management (Open Items and Oldest Open Items)

I have 2 questions.
1)What is the difference between Open Items check and Oldest open items
2) I want to activate a Credit management check which should work in way that the Order will be blocked on the basis of Payment term check
Let say if I am using the Payment terms 0001 i.e Payment immediately due net .now what I want is that if I post the first invoice system as configured will check only the Credit check againt the credit Limit but when i post the 2nd invoice on the same day and the first invoice is not cleared system should give a warning message for it .
Currenlty as i Configured it working but not for the same day option its give a warning on the 2nd day's invoice
SO Need the help of Experts.
Thanks in advance

Hi,
Open items check means it will consider all the open items when it is doing credit check. Here it adds all the open items amount and do the credit check..
Oldest open item means it will consider only the oldest open item and based on tht i will do credit check..Here i will check the oldest open item value and its date then do the credit check..
Coming to payment terms check, system is responding correctly.. because payment terms are immed due net. tht means still time is there in the same day. that is the reason it is not blocking the second document.
once move to 2nd day then it means first doc is not cleared tht is the reason it is blocking the 2 nd doc on 2nd doc..
Hope u have understand..
Regards
Sankar

Reg : Credit management upload

Similar Messages

Maybe you are looking for