Reg. G/L Account automatic assign in PR creation

Dear Experts
I am configure MM module in ECC 6.0, in which, when I try to create PR then the G/L account number is not assigned automatically. Only I did the below settings
OBYC - BSX
GBB -VBO,VKA and VBR
WRX
What are the other settings to be done for the above problem.
Kindly advise as soon as possible.
Thanks
Rajakumar.k

Hi
What is the type of PR u r trying create ==service or material
what is the account assignment u r using
if u use a material PR and account assignment as K then its consumption a/c will come automatically from OBYC.
G/L a/c will depend on the account assignment u r using
reg
Raja

Similar Messages

Automatic Assign account to send mail from?

I have several accounts and would like to know if there is some way to send mail to certian individules from a specific account automatically?
So If I create a "new" email addressed to John Smith MacMail will automatically choose to send that email using a predetermined email account, without having to choose it from the drop down menu?
Is that possible?
Thank you.

I you select the inbox of the account you want to send from then create a new message it will send from that account.
If you are hitting Reply then it will send from the account that particular email is in.
There is a popup window right under Subject on the new or reply email that makes for quick and easy switching.

G/L accounts not assigned correctly

Hi all.
We have items here purchased as stock spare parts via MRP run. These items are bought to cost center and then as they are used, that cost is redistributed to the consumption cost center.
However, the G/L account is not getting assigned correctly. The G/L account for these items is going to 630255 and it should be 630250.
For Stockable Item the Inventory account is assigned to G/L Account 630255.
Hence Posting will be made in to this account only at the time of Goods Receipt.
The G/L Account 630250 is assigned for the Event key GBB - Modifier VBR - for the Consumption account.
Hence for Account Assigned PO item, system will automatically picks the G/L Account 630250 as per the Automatic Account Determination.
So i want to know where we will configure the settings, while we do MRP run we will get a PR.
In that PR i have to maintain the account assignment category.
So when we made auto PR to PO then that PO will be account assigned PO.
Regards
KK

Hi,
While we run MRP system automatically creates the PR.
By using the PR we will create a PO.
But our items are Spare Parts,hence it will be consumed directly.
For Non stockable items the G/L account we have maintained is 630250.
So if we do GR it should be assigned to G/L Account 630250.
But while we do GR its updated to different G/L Account 630255.
Here G/L Account 630255 is meant for Stockable items.
Regards
KK

Vendor account group assign to Reconciliation account

Hello Experts,
Is it possible to customize a reconciliation account assignment to vendor account group?
Our requirement is when you create a vendor, then select a vendor account group, the reconciliation account will automatically be proposed in the field. This is to avoid selecting wrong reconciliation account when creating a vendor.
I had a look in SPRO but I couldn't find anything that could do that.
Thanks in advance
Regards,
Catherine

Thanks for your inputs,
I have checked in the system if there is a user_exit. Could you please confirm me that the user_exit "GLPLAN00 - Enhanced authorization and master data validation" is the good one?
My objective is to have the correct reconciliation account automatically populated when I am creating a customer/vendor with a specific account group.
e.g. select account group - XXXX Non-trade customer / Reconciliation acct XXXXXX non trade customer automatically populated.
Thanks in advance for your help.
Catherine

G/L is not automatically assigned to material component

Hi All,
We use transaction CJ20N in creating a meterial component, non stock item category(N), G/L is not automatically populated. Could you please tell me how does the system in SAP automatically assign G/L account in the material component. I have checked the valuation class for the material group and a G/L is assigned there but it is not assigning in the material component.
Thanks in advance

hi,
yes i have checked the network profile and the g/l account is mandatory, therefore prompting the system for the g/l account to be assigned first
also, the g/l account is assigned to the valuation class
Edited by: UserID on Aug 8, 2011 8:09 AM

Automatically assign cost center

Using SAP 4.7
We need to automatically assign Cost Center at the time of asset retirement through scrapping. User doesnt have to enter the cost center.
I have tried additional assignment in asset - integration with GL Account but it fails to do.
Can Please somebody help me out in this regard.
Regards
Sajid Hakeem

Hello,
>Cost center will be given in the asset master....you aware of it...ok...
>At the time of scrapping the asset the scrap will go to necessary scrap GL for that you have to give cost center in OKB9...you aware of it but you dont want to happen like this...and you need to have a different cost center(ie., as in the asset master) ....quite complicated....
> ok...to achieve this atleast should have different profit center for each assets..do you have? if so..... Then come to OKB9 in the acct assignment column give value 3 and in the subdialouge box click on Details per profit center wise ....there you can give cost center per prctr.
Hope this helps.
Regards,
Velumani

Reg. Stock account instead of consumption account

Dear Experts
Pls consider my below scenario
When PR and PO creating material is posted to consumption account automatically,but our company needs to be posted stock account with account assignment category E. I am struggling for 6 months no one is given correct answer. I hope that any one of you can solve my problem.
Thanks in advance
Rajakumar.K

Not answerd

Automatic assignment of Tax Code

On a Purchase Order, is there a way to do an automatically assignment of a Tax Code when has an Account Assignment Category Q (Proj. make-to-order).
This is because on a local legislation sometimes an investment project could not has any tax (0% not capitalize).
Thanks.

we Can;t assign for the taxcode automatically based on Account assignment cat.
Those details will flow from -Subsequent doucemnts or from record such as Inforecords, agreements etc.
If you want to have same taxcode for account assignmnet cat every time -Create a PO with reffereing to Purchaseorder which one is having taxcode what you want to use. so that same data will flow their.
with regards
Shrinivas gangoor

IdM: Automatically assign a privilege when create a user

Dear all,
I want automatically assign a privilege to a user, when a create this user. How I have to do this? Must I use dynamic group?
My idee is: All of our people need a account in the SAP portal, so I want to assign automatically the privilege PRIV:PORTAL:ONLY to the user.
Best regards,
Hans

Lot of options depending your requirements..
Dynamic group is one option but it requires small configuration effort.
If it's all users, maybe then an add event task for MX_PERSON where you grant the privilege? Takes 5 minutes to do.
Are there any exceptions? Do you have also non-dialog users in your IdM?
Any requirements for deprovsioning?
Where do you get the users? If it's SAP HCM-integration case and no users are created in the UI, then add the privilege in the job that moves the identities from staging Id Store to your master Id Store.
regards, Tero

Query-Automatic assignment of Record type to Book of Business-Pls help me

I have a query about Automatic assignment of record in Book of Business.
Using 5 record types & 50 regions as a part of Book of Business. You can say 50 sub-books.
I want to assign these 5 record type to particular Book when to create & modify.
Eg. When I create new account it should be automatically assigned to Book 1 & later I modify this account for reassignment to new user then it should be automatically added to the new user’s book.
I need to create workflow for this as Assign to book criteria for both when new record saved & when modified record saved.
I have tried this & its working; however problem is with the creation of two many workflows.
50 region (Books) x 5 record types * 2 - Create/modify flow = 500 workflows for one country!
If I am right then I can assign 1 record type with action as create or modify in 1 book only.
How to reduce these no. of workflows?
Pls help me out in this regard.
Regards
Mangesh

Mangesh,
I am sorry to tell you that there is no quick answer to this but i will say that maybe you need to rethink your book structure and their requirements here.
I have 4 types and 7 regions so you need to create books to allocate all these on create and also modify. Customers have raised concerns with this to Oracle and they are looking into it but they are along way from completing this. Sorry to spoil your day but i would strongly ask you to consider your books structure before you complete this.
Otherwise if you are using webservices you could assisgn the book when the record is piped into the CRM and then you only need to complete the modify workflows.

Disable an account automatically

Hi everybody,
I think I misunderstood something about disabling an account automatically.
I retrieve datetime attribute from HCM system and set up MX_VALIDTO attribute (MX_PERSON entrytype). I believed that when the MX_VALIDTO is reached, some how MX_DISABLE is assigned to the user and task to disable the account is triggered. But nothnig happens in my case.
I must be missing something..
Do I have to make a script to trigger a custom task that assign MX_DISABLE to the account?
Thanks
Guillaume

Hi,
Which source attribute in HCM do you use to calculate/setup MX_VALIDTO date?
The scenario you described happens when a user status (STAT2) has changed in HCM, in this case from Active to Withdrawn. In the IDM default framework this attribute is mapped to MX_LOCKED. This is a global attribute just like MX_DISABLED.
The MX_VALIDTO attribute doesn't trigger any events to disable an Identity unless you configure it using e.g. a task linked to the attribute Event handling, configure the Modify Validity on the repository or a Custom Job that runs daily after midnight to retrieve all expired users.
I use MX_VALIDTO for temp-contractors because IdM is the single source of truth but never do this for permanent employees. For employees I have a process that checks the status when a user has changed in the HCM load and set the MX_DISABLED attribute if the user has been withdrawn.
MX_DISABLED will trigger events to disable all accounts in target systems but will not remove Business Roles from IdM. You need to include this in your termination process.
I hope these help!.
Regards,
Ridouan

Customer Down Payment invoice (from delivery) not automatically assigned

If I create a Down payment invoice from Sales Order (and I paied it) on the final invoice the sistem automatically assigne the down payment invoice on the final invoice for the order.
If I do the same think but crerating the Down payment invoice from the delivery (and I paid it) when I create the final invoice I need to assigned it manually.
SBO 8.81 PL 06
I haven't found any set up for this, so I think is an error the sistem must work on the same way if the document is copied from the Sales order or delivey.
Someone know if there is some set up? or I need to open an error message to SAP?
Thanks

My question is:
If I make a sales order.
I create a down payment invoice using copy from SO.
I make the incomuing payment for the down payment invoice.
I create the delivery from the SO
I create the invoice from the delivery
The system apply automaticaly the down payment invoice to the invoice (because I select a delivery that is linked to the so that I used to create the down payment invoice).
If I make a sales order.
I create the delivery from the SO
I create a down payment invoice using copy from delivey.
I make the incomuing payment for the down payment invoice.
I create the invoice from the delivery
The system DO NOT apply automaticaly the down payment invoice to the invoice (even if also this document is linked to the delivery that I use to create the down payment invoice).
I know that I can select it manually. But I can select it manually also if I use the SO to create the down payment instead of the
delivery. Why if the situation is the same in the firs case the system do it automatil^cally and in the second case I need to do it manually?
Of course if I create a Down Payment invoice without selecting any document (SO, delivery..) the system don't know if you want to apply the payment to the final invoice.
But If I select the delivey to create the down payment (the same if I select the SO): I want to apply the down payment to the final invoice of this delivery and not to another delivery.

Error Message: No G/L account is assigned to account symbol 1 / 5..3.3

All,
Appreciate your expertise on the above error message as per subject: No G/L account is assigned to account symbol 1 / 5.3.3
While posting securities - bond investment transaction via TBB1 (post flow), we got error messages for both Account Symbol 1 and 5.3.3
Steps taken, assuming it'll resolve the problem are:
1. We've defined a new Account Assignment Reference for Bond Investment - Held-to-maturity.
2. Then, at Account Assignment Reference Determination, we change the constant from the SAP standard to the new one created at Step 1.
3. After that, we've added in the Allocate Additional Account Assignments to Account Assignment Reference by Company Code.
4. Finally, we've defined Account Determination based on the new Account Assignment Reference.
Despite performing all of the above steps, we still receive the error message. Please help. Additionally, this is for our new Company Code.
Thanks!
Edited by: afique0307 on Aug 23, 2011 11:22 AM

These are the steps that we did for our new product Securities - Bond Investment.
1. IMG - Define AAR : We have both standard 50300 and our new AAR BD1100-HTM
2. IMG - Define AAR Determination for Securites : at constant now it's ponting to the standard 50300. We even tried to point to our new AAR BD1100-HTM. Both still produced the same error message.
3. IMG - Allocate Additional Account Assignment to AAR : New Company Code --> New AAR BD1100-HTM --> BArea --> CCtr
4. IMG - Define Account Determination - Assignment of GL Account to Account Symbols : 1 --> BD1100-HTM
5.3.3 --> BD1100-HTM
5. Then, created a Class ID as our 1st purchase of Corporate Bonds by using the standard Product Type 04I Fixed Interest Bonds
6. Next, we encountered the error message while performing TBB1 Post Flow for the above ID Number created. It says AAR 50300 is not assigned with GL Account for Symbols 1 & 5.3.3.... It doesn't point to our new AAR BD1100-HTM even we have configured earlier.
7. And we tried to perform TPM28, but we got nothing as the system prompted "No Transfer Was Carried Out"

I have been trying to recover or reset my password, but the reset email never comes, so I can't change my password. I tried to open a new itunes account to assign my iphone 4 to, but it always defaults to the old itunes account?

I have been trying to recover or reset my password, but the reset email never comes, so I can't change my password. I tried to open a new itunes account to assign my iphone 4 to, but it always defaults to the old itunes account?

Me too! I tried to reset many times the password of my daughter’s id but she never received an email with instructions. :-(

Automatically Assign to user based on email

Hi Guys
One of our IT managers would like to be able to have service requests automatically assigned to members of his team based on emails he sends.
At the moment we have an exchange connector set up that logs Service Requests for his team, and assigns it to the their support group. I'm trying to figure out the best way to further refine it to then assign it to a support person based on some criteria
within the email itself. The way i figure it, I'll need to to do it via Orchestrator.
I'm thinking something like:
Email generated Service Request triggers a runbook, that either pulls the email attachment out of the SR and then does (something) to resolve the AD User from the CC field and assigns it to that person. Then he can just CC the team member and it will assign
it. The hard bit is figuring out how to resolve an AD user from a field in a *.eml file.
or
He types the AD name of the user on say line 1 of the email, then orchestrator reads that line and looks up the AD user based on that. Seems easy enough but then he will need to make sure he uses either the absolutely correct spelling of their name, or type
their SAMAccountName out.
By email CC field is the more user friendly option but I have no idea if that's even possible.
Does anyone have any thoughts about how to go about this?
Cheers

OK so he has changed his request now after I spoke to him.
He now wants any emailed service request to be automatically assigned to the sender.
So basically I need to create a runbook to set the Assigned To user to be the same as the Affected User.
Sounded easy enough, but the "assigned to" field is not present in the orchestrator update object action. I think this is now a question for the Orchestrator forum so i'll mark this off and start a new thread there.
Thanks.

Reg. G/L Account automatic assign in PR creation

Similar Messages

Maybe you are looking for