Reg Output medium in Purchase order.

Hello Experts,
I am working on SRM 5.0, Standalone scenario with strategic procurement.
We have a requirement from users to hide the Output medium link in PO display screen. This has been done but now when I go in "Change mode" for purchase order, I am getting the following error - "Output: No details for medium PRN in vendor master record" .
Any idea how I can resolve this issue. I have already checked for the attribute "Default Printer" as LOCL set at Company level.
Also, while debugging I noticed this error arises from a check in FM - BBP_OUTPUT_PO_PARAMS_CHECK - Message class - bbp_ui_po and
msg-id - 045 (line no 112).
Kindly let me know your suggestions.
Regards,
Rajeshree.

Hi
Please Maintain all the mandatory organizational attributes to the root Enterprise
organizational unit. (In Transaction PPOMA_BBP).
Add the attributes to the root - organization unit.
PRI (Default printer) say LOCL or LP01
Also refer to following SAP OSS notes.
Note 1028388 - User settings for output medium is not saved.
Note 885593 - SRM 5.0 SP02: Incorrect output medium and change impossible
Hope this will help.
Please reward full points, incase it suits your requirements.
Regards
- Atul

Similar Messages

Reg.Output type for purchase order

Dear Sir
I followed your steps but not come to "List of allowed output"
when I select the message for Purchase order(ME21N). There are listing NEU,SPO,MAHN and AUFB.
I just copy the NEU and all,I did not change anything.
Maintain Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
Ex:
EF---> TES
Select TES and double click on Mail title and texts and go to
EN- New Purchase Order Print Out,
Select TES again and double click on Processing routines,
Select TES again and double click on Partner Roles
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO(ME21N) and save it. Go to ME22N and print the PO by giving output type TES.
Please help me sir
Rajj

Hi
Go to NACE
Select application as EF Purchase Order
Define TES as out put type there
Vishal...

Reg:output determination in purchase order

hi,
when i am creating purchase order i given all the details once i go for save the order it shows a pop up window " no message could be found for output of mesage save any way '.
my requirement is how to avoid this popup message. i thing the problem is output determination is it correct?
regards
muthuraman.d

Yes, it is output determination. The system is telling you that no message e.g. PO print out, will be produced.
SPRO-> IMG-> Material Management-> Purchasing-> Environment Data-> Define Attributes of System Messages..
The message id is 06 261
I think as a default this is a warning, even without an entry in the above table. You can add it and set to 'no entry' i.e. switch it off. This OK in Development or PPD but I wouldn't suggest you do this in Production.
Regards,
Nick

Output error in purchase order 3000000002 for output medium PRN

Hello,
I got this error message:
'Output error in purchase order 3000000002 for output medium PRN'
Regards,
Lina

Hi
Please go through this ->
To set Output type,check the foll path:
SPRO->supplier relationship management-> SRM Server->Cross application basic setting->set output action and output format
See the foll link for more details:
http://help.sap.com/saphelp_srm50/helpdata/en/91/41faf2c220e84c9002a4ae4cc1906a/frameset.htm
Look for BADI "BBP_SEND_MEDIUM_MODE ".
Related notes:
Note 1028388 - User settings for output medium is not saved.
Note 885593 - SRM 5.0 SP02: Incorrect output medium and change impossible
Do let me know.
Regards
- Atul

Suppress Output type in Purchase order 'message' tab

Hi,
Can any one suggest how to suppress the existing output type in purchase order ' selecting from list of output's from message tab'.
We need in database and should not delete. can it be possible to hide from list in PO that user cannot select that output.
Thank You,
Bhanu.

Bhanu,
I got your requirement, but could you please let me know on what scenario you need this, because if you need the system to perform like this only when there is some specific fields in the PO, like for eg, P.organisation, or vendor, or Document type etc,,,,anything specific to this,.....then i think if you create a table which will exactly show your target values, like grouping DOC+P.ORG+VN, or any other combination, and then assigning this to one access sequence which will in turn get assigned to the Output type which you want, then i think only that output type will pop up as the other one is not assigned to the access sequence or the combinations you set. Likewise you can suppress one Output type.
Regards,
Sankar

Assign Form and Output Program for Purchase Order

Hi,
in SPRO, Assign Form and Output Program for Purchase Order I see the following data:
- IMG Activity Assign Form and Output Program for Purchase Order
    - View Maintenance: Data
- VV_TNAPR_EF
- TNAPR
- 007ZNEU2EF
What is 007ZNEU2EF ?
Yours faithfully

I dont have enough knowledge on this one. However i will try to clarify this
007 i think its a version
ZNEU2 its a Process type
EF Purchase order

Problem in using output type for purchase order

Hi experts,
I am using output type for first time so may be i have done wrong configuration for po output type.The steps i have done are :-
1) Going to tcode NACE->Selected the row u201CEF Purchase Orderu201D and clicked on u201CProcedures".
2) In procedures there are 2 procedures for the application EF (Purchase Order). To proceed further, we would need to find out the procedure that is currently active.Gone to transaction SPRO. In this, navigate as Materials management -> Purchasing ->Messages -> Output control -> Message Determination Schemas ->Define Message Schema for Purchase Order
3) Clicking on u201CAssign Schema to Purchase Orderu201D. So, the procedure RMBEF1 is active for EF (Purchase Order) .
4) Go back to transaction NACE. Select u2018EFu2019 and click on u201COutput typesu201D.
5) Let us use the output type u201CNEU name purchase orderu201D for this purpose. Double-click on NEU.
6) Ensured that the checkboxes u201CAccess to conditionsu201D and u201Cmultiple issuingu201D are checked and the access sequence is 0001(DocType/PurchOrg/Vendor).Only 0001 and 0002 is available in f4 help for this.
7) Now clicked on u201CProcessing Routinesu201D on the left hand side. Ensured that there is an entry for Medium u2018Au2019 (Distribution ALE).
8) After that going back to the main screen of NACE. Select EF (Purchase Order) and clicked on u201CCondition Recordsu201D.
Select NEU and clicked on u201CCondition recordsu201D. The pop-up box appears that gives three radio button option :-
1) Purchasing output determination :purchasing org / vendor for EDI
2) Purchasing output determination :doc. type / purchasing org /vendor
3) Purchasing output determination :document type
but it is not having option only for purchasing organisation through which we can send idoc for changes or creation of PO in that particular pur.org now if i choose 2) i have to give doc type and purchasing org both bcoz they are mandatory fields and value for vendor.
9) Also i have done the necessary ALE configuration (not covered in this document). In the partner profiles, use the message type u201CORDERSu201D and the IDOC type u201CORDERS05u201D.In the tab u201CMessage Controlu201D, used the process codes u201CME10u201D and u201CME11u201D for u201CPO Createu201D and u201CPO Changeu201D respectively.
but the idoc is not generated many times when po is changed and when once it is generated it is giving error
Please suggest solution.
Thanks in advance
nehavt

In me22n in messages tab after looking into processing log it is giving->No recipient found for message type ORDCHG in the
ALE model ,next time giving error as no idoc items belonging to purchasing document found,when i changed message type to ORDCHG the status is green in messages tab it is giving-> error occured while idoc xyz is sent and in WE02 status is red 02
error passing data to port(could not find code page for receiving system)

Output determination for purchase order

Dear friends,
Please help me, how to create condition record for both printout and email for output determination of standard PO.
I have created condition record through MN04 for Purchase order with medium(external send) and it worked.
I also need to create condition record for printout. Because Client wants to select either email,fax or printout. They will select whatever sending option.when i tried to create condition record for medium(1-printout).I got an error " The condition record entered already exists". So i tried to change that condition record,but i got here also error as "The condition is being processed in the current session".
Please help me to set up condition record for both mail and printout for standard PO.
Thanks

For this kind of option you need diff message type like
use NEU for Fax and Print and for Email create new message type than it will work.

Changing message medium of purchase order depending on value of po

Hi,
we want to send a purchase order via fax if the netvalue is lower than 1000 EUR. If the value is higher then the po should be printed.
Is there any Exit or Badi to change the medium of a message depending on the value of a po?
Regards
Martin

Hi Martin,
Medium of a message is determined by the output condition record and I don't think you can use an exit. You could build a ouput new condition table but PO value is not available as a key.
You can explore this option.
Create a new condition table and include an unused field as a key from the list of allowed fields. Find a user-exit in the PO which can update the above field with unique data. Create OCR with for this key combination.
Cheers !

Output type of purchase order as email

Hi Experts,
I want to configure the output type of my purchase order as email also so that when i can save it as a pdf file. kindly tell me the procedure of configuring it with path in SPRO.
Thanks
Harmandeep

Check this Link purchase order as email - SAPMM06E and TEXT_SYMBOL_REPLACE
it will be helpful for you.
Regards,
S Anand

Unable to debug output type for purchase order

HI all,
In purchase order (ME21N) , i have a custom output type (ZSND) that send po to the user. I try to debug the program when the output is called. I put breakpoint in the custom program for the output ZSND. However, It did not stop at the breakpoint.
Can anyone tell me how I can debug the program ?
thanks
Joyce

Hello,
Try this:
1. Put the break-point.
2. Go to the transaction me22n --> go to mesaage --> click in your output type message click on further data --> put in dispatch time 'Send with aplication own transaction'
3. Go to transaction ME9F put your document and message --> a list with the document will appears --> choose one and process it --> then it will stop in the break-point.
Hope this will solve your problem.
Best Regards

Default output type in purchase order

Dear All
i have short and easy question:
how can i set one output type(like NEU) as default in purchase order as when create P.O output type automatically comes from customizing?
best regards
R.T

Hi,
If you have done all customizing setting & maintain condition record for message type in t.code : MN04. Now Just fine tune the output (message) type in following path:
SPRO>MM>Purchasing>Message>Output control>Message tyoes> Define message type for Purchase Order-->Fine-Tuned Control: Purchase Order
Now here select the check box corresponding to your output(message) type NEU to have print output for this message type is automatically displayed & save.
Now try creating PO & u will have default message type.
Regards,
Biju K

Message output for New Purchase Order Document type

Hi experts,
I am having trouble getting a Print message output for a New Purchasing Document type that I created.
Steps that I followed are:
1.Created a new Document type NS via customizing.
2.Assigned the new Purchasing Document Type NS to Output Type NEU which is linked to our customized form for Purchase order display. I used MN04 /NACE to do this step.
Now the message output gets created for my new document type NS but I am unable to display the message.
Notes:
-There are no release stratergies in place for document type NS
-The NEU format works fine the other document type NB which we use for Standard POs.
Are there any steps I have missed? Please help to resolve the issue.
Arosh.

Goto NACE select application EF Purchase Order then goto condition record NEU select condition record select the last key combination "Purchasing Output Determination: Document Type"
here enter your doc. type execute
maintain the condition record
NS VN(function) 1 3 EN and click on communication and maintain
Or goto NACR here put EF and NEU and select the last combination "Purchasing Output Determination: Document Type"
maintain ..
NS VN(function) 1 3 EN and click on communication and maintain
Hope it helps..

Output Message for Purchase order not being created Automatically

Hi all,
I created a Condition type for Purchase order in MN04 with key combination "Doc.Type/Purch.Org/Vendor". The problem arises when i delete this condition record. After deletion when i create purchase order in me21n for that condition type, the system gives an error.
Message no. 06261 - No message generated for output of purchasing document.
Is there anyway the purchase order message is created automatically again when its condition type has been deleted from MN04.
- Regards
Sahar Khalid

Before creating the entry in MN04 the message was being created automatically. I want the system to create the same output message as it was creating before the creation of the entry in MN04.

Change output type of Purchase Order

Hi All,
Is it possible to programmaticlly change(or add) the output medium in transaction me21n / me22n when a user creates a PO?
I've been able to config the system to allow the PO to either be emailed or faxed upon the user saving. There is a requirement that when the user clicks the save button through a pop up window they can either choose fax or email, and it must then either fax the PO off, or it must email it depending on what they selected.
Is this possible?
Thanks!

U can do it, provide the desired Output types are configured in NACE.
Just look it in NACE > Output types 'EF' and select NEU click Processing routines,see what all output types defined.
Now Goto> tcode ME23n> choose an order> In essages>Check wether message type has the medium FAX or Email. Set the message Output type for ur desired and save,
Click on Further data and select at the time of saving.
For FAX you have to make some technical customizing in transaction SCOT in order to configure Fax connexion from SAP and then set the file fomrat you want for fax.
Remember that if you want to send Fax directly from SAP, SAP need to be connected to a Fax Card or a Fax Server .
Edited by: Bala Krishna on Aug 13, 2008 9:42 PM

Reg Output medium in Purchase order.

Similar Messages

Maybe you are looking for