REG : Splitting of a message.
Hi All,
I have a scenario where i need to split a file into 2 files based on one value from the input node and place the 2 files in 2 different locations. To achive this i used 2 message types in target side of the message mapping and 2 receiver interfaces in the target side of the Interface mapping.
In configuration part i ran the wizard for 2 times and checked the enhanced radio button in Interface Determination.
But the problem is i am getting my file splitted based on the value and both the splitted files are getting posted in two target locations.(ie in target 1 i am getting both the splitted files posted and in target 2 i am getting both the splitted files posted.)
Is there any method by which i can achive my solution
Thanks in advance,
Siva.
Hi,
The blog tells about splitting of a msg into n msgs but it does not talk about conditional reciver detemination............you are getting both files in both target locations because you have not specified its condition in reciver determination........so in receiver determainton where you have added both reciver systems, there in condition tab, you have to add the condition in which you will tell the XPATH of the source node and its value based on which the reciver system is to be selected.........then activate your reicver determination and rerun your scenario.
Regards,
Rajeev Gupta
Similar Messages
-
hi..
after i upgrade my c7 to new version smbyian anna why my split screen for messaging not working?
And i also cannot upload photo to social network.. Be4 upgade everthing is fine.. It is something wrong wit my phone?hm.. not too sure if this has anything to do with the current screen-flickering issue some macbook owners have or not..
as for mine, the flash of light happens during any program or with no programs at all. it's completely random. yours could be the start of a flickering issue, or it may be nothing at all. wait and see what happens with it...if it happens while using other programs or not. that's the best thing i can say. -
Split Bulk Xml message in to many
Hi,
How to split large xml message in to many xml messages in biztalk 2006. For example if that xml message contain more then 10,000 records then I have split into each 10,000 records. Can anyone help me?
Thanks,Hi,
There are four methods to get your message debatched:
Receive Port Pipeline Debatching
Orchestration debatching by calling a pipeline.
Orchestration XPath Debatching
Orchestration Atomic Scope Node List Debatching
1)
Receive Port Pipeline Debatching
http://social.technet.microsoft.com/wiki/contents/articles/26005.biztalk-server-debatch-xml-with-envelope.aspx
2)
Orchestration debatching by calling a pipeline.
http://jeremyronk.wordpress.com/2011/10/03/how-to-debatch-into-an-orchestration-with-a-pipeline/
3)
Orchestration XPath Debatching
http://www.digitaldeposit.net/blog/2006/12/message-debatching-inside-biztalk.html
4)
Orchestration Atomic Scope Node List Debatching
http://geekswithblogs.net/sthomas/archive/2005/03/21/26924.aspx
You can check out the performance of each method @
http://geekswithblogs.net/sthomas/archive/2004/12/12/17373.aspx
Rachit
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
How to split big xml-messages with file inbound adapter
Hello,
we have big xml-messages in our filesystem, which are processed by XI 3.0 (SP11). We are using the file inbound adapter. Now we want to split these big xml-message into some smaller messages.
Exist there a corresponding function to the "xml.recordsetsPerMessage" which is working with xml-files?
Thanks!
Regards
StefanHi,
maybe you can split the message in the BPM
with 1:N mapping?
Process Integration (PI) & SOA Middleware
I don't think anythink like "recordsetsPerMessage" is possible for xml messages
Regards,
michal -
Hello! I have some message type:
<mt>
<record>
</record>
</mt>
where occurence of "record" is 1000, for example. And I need to split it to the same message type but with "record" occurence 10.
So, if I have one big XML-file with 1000 records, I need to have 100 files (10 records per file).
Could you help me please?Hi, Andrey,
What kind of sender channel have you?
If your sender channel is a file content conversion, try with Recordsets per Message parameter.
If your sensder channel is a JDBC , you must split your message in a store procedure..
Regards,
Carme -
Splitting and Collecting Messages
Hi,
I have a scenario in which I get a message from SAP. In this message their are multiple item structures and 1 header structure. Now I have to sent these items to a WS seperately and collect the messages from the WS response in one message with a header.
Something like:
Receive Message -> split message (message mapping) -> send all to WS / receive response for everyone -> collect messages from response in a new message -> send the new message to another WS
How can I do this in BPM?Hi Chris,
Your design should be like this:
Start --> Receive --> Transform1 (Do the split and multimapping) --> Send Step1 (Synchronous) --> Send 2 (Send Response from send1 to the output) --> Stop.
Regards,
---Satish -
Splitting a Idoc message without BPM
Hi ,
I have seen several posts on this topic splitting Messages with/without BPM. But I think I did not get the currect answer so far. Here is my scenario:
We are using PI/XI 7.0 Sp 09, Idoc-XI-WM (third-party WMS systems)
SAP(Idoc) -
> XI (httpa dapter)-------> 1. Http server (WMs 1 - BS1)
> 2. Http server (WMs 2 - BS2)
> 3. Http Server (WMs 3 - BS3)
I have SAP ECC sender System and 3 receivers-WMs, 3 different Warehouse Management systems running at different warehouse locations and each warehouse is like a different system which has different IP address and etc so we defined each WMs is new Business System in the SLD.
We have a purchase Order Idoc coming from SAP ECC to XI with multiple line items, here each item may belong to one of the above 3 warehouse locations(BS) so based on the certain logic I have to split the incoming 1 PO up to 3 POs and send each PO to each warehouse location with different http adapter.
ECC- IDoc -
>(Idoc xml using Idoc adapter) XI (splitted Idoc xlm(s) using Http adapter)---->WMS
Please give your valuable inputs, I am already working on withBPM scenario but please suggest if have any good solutions with or without BPM.
Thanks,
Laxman MoluguLaxman,
Multi-Mapping without BPM is possible from SP14. Go through this url which will help you:
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Check this threads which will also give you some idea:
Process Integration (PI) & SOA Middleware
Message Split
---Satish -
One idoc that needs to split into three messages
Hi,
I get an idoc from sap through change pointers. The IDOC needs to be mapped via a mapping program which splits into three different messages.
Let me know how to achieve it.
Some notable info are that the the three messages have different flat structures.
Your suggestions are well rewarded.
Regards,
B.AnandhHi,
Try these
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3115---- [original link is broken] [original link is broken] [original link is broken] Multi Map With out BPM
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi Various multi-mappings and
Optimizing their Implementation in Integration Processes (BPM) in XI.
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure --- Illustration of Multi-Mapping
and Message Split using BPM in SAP Exchange Infrastructure
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm (N:1 Mapping )
Regards
Seshagiri -
Splitting XML Incoming Message for BizTalk
Hi,
I have a BizTalk XML Input message like the one below and I would like to generate single xml message for every BacklogMaterialNode I have.
Source Format.( Complete Message)
==========================
<BacklogSnapshot xmlns="http://www.myorg.com/InventoryBroker" version="1.0" plant="NA01" pubdate="2014-04-14T09:30:00Z">
<BacklogGroup id="123456789012">
<BacklogMaterial SAPMaterialNumber="100010">
<Quantity UOM="EA">11</Quantity>
</BacklogMaterial>
<BacklogMaterial SAPMaterialNumber="100020">
<Quantity UOM="EA">12</Quantity>
</BacklogMaterial>
<!-- ... -->
</BacklogGroup>
<comment><!-- TODO --></comment>
</BacklogSnapshot>
I would like to create separate xml message for every node "<BacklogMaterial>" Like the below one.
Message 1.
============
<BacklogSnapshot xmlns="http://www.myorg.com/InventoryBroker" version="1.0" plant="NA01" pubdate="2014-04-14T09:30:00Z">
<BacklogGroup id="123456789012">
<BacklogMaterial SAPMaterialNumber="100010">
<Quantity UOM="EA">11</Quantity>
</BacklogMaterial>
</BacklogGroup>
<comment><!-- TODO --></comment>
</BacklogSnapshot>
Message 2.
==============
<BacklogSnapshot xmlns="http://www.myorg.com/InventoryBroker" version="1.0" plant="NA01" pubdate="2014-04-14T09:30:00Z">
<BacklogGroup id="123456789012">
<BacklogMaterial SAPMaterialNumber="100020">
<Quantity UOM="EA">12</Quantity>
</BacklogMaterial>
<!-- ... -->
</BacklogGroup>
<comment><!-- TODO --></comment>
</BacklogSnapshot>
Objective is create single IDOC for every BacklogMaterial Node and Post the IDOC into SAP.
-Saravan.Hi Saravan,
it is possible, in theory, to do what you want to do. However you have not supplied enough information to let us resolve what is going on in your case.
Firstly, in all the documents sent to SAP I've never seen the Wcf adapter or SAP duplicate a Message and so I expect that it is one of your maps that is doing that. Also unless you really want to send multiple Idocs to SAP ERP in one batch I would stick
to a single IDOC at a time. However that is your decision and it depends on the business and performance requirements placed upon you.
I will sketch out a technique that I have seen working before, it is not the only way and there are probably several others. The idea is to use a two-pass approach, take each "BacklogSnapshot" and map it to the form of an Envelope with children
that will be mapped to single Idocs. Then you have to get that single file through the xml disassembler again where it will split the file into a series of messages that can then be mapped to single Idocs.
I suspect you have already taken an approach similar to this? or perhaps even tried to go direct to a "Send", i.e. envelope to envelope? I can't think of anything wrong with this approach either. I would check your Map again, I suspect
data is getting jumbled in the map.
It is also possible there is a subscription problem, i.e. each message is getting sent twice to the adapter - however if that is the case it would replicate message and not jumble it.
mark -
Reg: display the warning message in alv out put
Hi All,
i am uloading the flat file data ,display in the alv grid in the edit mode. when i am trying to change the output data in grid, for which are having the blank (no value for the field) , i want to display warning message the selected cell is blank.
could u help me on this please.
Thanks,
KumarFor editing the ALV cell .. you would be writing some code .. which is mandt rite ?
So before that code u check the filed value ..initial or not .. -
Reg : Reprocessing of failed messages in SAP PI 7.3.1 Single Stack
Hi All,
I am working on FILE to IDOC Interface. I have encountered a new problem today.
When we started testing this interface, the message were failing at the IDOC Adapter.
When I debuged the error, I found that, we were passing chars for a Date Field in IDOC.
I updated the mapping on the same and when I tested the Interface it works fine end to end.
However when I want reprocess the failed message from monitoring, the failed messages are being reprocessed from the point of failure and not from the beginning of Pipeline
Since the changes are made at the mapping , none of failed messages are being processed.Did any face the same issue and how did u guys resolve it. Can you please help me on this.
Thanks
SivaHi Siva
That is the correct behavior in PI. Reprocessing of failed messages are always restarted from the point of failure and not the beginning of the pipeline.
If you want the messages to start at the beginning of the pipeline, you need to resend them, in your case, put the file in the source directory.
Rgds
Eng Swee -
Reg:Table for Custom Messages and custom Messaege Classes
Hi ,
My requirement is to find out all custom messages . so can any one tell in which tables all custom messages and custom message classes are stored .
Thanks & Regards,
Lakshmi.hi,
You can checkthese tables listed below,
T100 Messages
T100A Message IDs for T100
T100C Message Control by User
T100O Assignment of message to object
T100S Configurable system messages
T100SA Application Areas for Configurable Messages
T100T Table T100A text
T100U Last person to change messages
T100V Assignment of messages to tables/views
T100W Assign Messages to Workflow
T100X Error Messages: Supplements
T100ARBGB Application Area
But The main table for storing all the message classes and their numbers are stored in table
T100 -
Hi All,
I have a Problem I activated the split valuation for a specific plant now in MM master for that plant alone the valuation category in accounting view is in display mode i couldn't enter any thing here where as if i check for any other plant is in editable mode what could be the reason for this ?Hi
For the other plants which are all in display mode check whether the split valuation is active or not
And the display mode in MMR comes for all the materials in stock or only some of the materials.Check for some material which are not in stock
Regards
Amuthan M -
Reg.Debite note alert message during invoice
Dear Experts
We want an alert message during Invoice against Purchase order that "Debite note is raised" if I created debit note advise in F-41. what I should do. Pls advise.
Thanks
Rajakumar.KDear All
I solved my problem myself. Thanks
I made an entry in MIRO with the option "Credit memo" and made payment to vendor the balance amount only will come deducting the debit amount from vendor.
Thanks
Rajakumar.K -
Reg.Debite note alert message during invoice MIR7
Dear Experts
We want an alert message during Invoice against Purchase order that "Debite note is raised". what I should do. Pls advise.
Thanks
Rajakumar.KDear Expert
I have one idea,but I don't know how far it is ok,
in vendor master one option is there that Payment block where if I select blocked for payment during control the debit note. If I do so,I will get the message during invoice that the payment is blocked like then, then I have to change the Payment block to Free for payment.
I changed the Payment block to Blocked for payment which was not working while invoice.
Pls advise
Thanks
Rajakumar.K
Maybe you are looking for
-
Dear all, We have a project that doing migration from flex 3 to flex 4. We use flexlib the latest version of flexlib - 2.5 - flex4.zip. However we confronted problems that several of attributes that flex 4 doesn't support: Constraints are listed as f
-
ATP warning: Lock rule not maintained
Hi Friends, I am creating a delivery for Subcontract PO components and I am get the following warning message: " Lock rule not maintained for ATP group ZS" Sanjay
-
SCJA study (requesting suggestions)
This weekend I took the SCJA and failed with a 54%. While disappointed, I'm more worried about passing next time. Specifically, my weak points were: UML Representation Algorithm Design and Implementation Java Platforms and Integration Technologies Ca
-
One report contain two orientation sections
Hi all, Is it possible to have different orientations on one report? My client hopes a letter would be printed at the beginning which is followied by data output in landscape orientation. Thank you very much, Clara
-
Publication Error - Scheduling failed
hi All i'm trying to create a new simple publication on BO XI 3.0 system with a crystal report i create the CR and export it to the enterprise platform i run and refresh the CR from the Infoview, its working fine. i create a publication for this CR w