Reg Structure
Hi Gurus!
I had made a ZBAPI and one Zstructure. Later on, requirements got changed. Hence, I deleted one of the field from the zstructure say 'cskfor'. Not to forget, I made that ZBAPI obsolete.
Now, I am trying to add two new fields into zstructure. While activating, it says --
TABL ZBAPISTRKNKK was not activated
Check table ZBAPISTRKNKK (ABAP/17.12.09/12:40)
BAPI-structure: invalid change: field CSKFOR should be deleted
Check on table ZBAPISTRKNKK resulted in errors
Please give me lead to come out with the solution.
Edited by: Kumar Saurav on Dec 17, 2009 8:16 AM
Hi Abhii!
Thanks for giving lead! But, problem still exist. Because, when I tried to run se14, following error comes up --
Object ZBAPISTRKNKK cannot be processed via DB utility
Message no. GT310
Diagnosis
You cannot process this object via the database utility because no representation on the database is intended for this object.
This message appears, for example, if you try to process a structure with the database utility. This is rejected because structures cannot be created on the database.
Procedure
It is not possible to process this structure via the database utility.
Please guide me further.
Similar Messages
-
Reg Structures in Query Designer
Hi,
Can someone explain the following regarding Structures usage in Query Designer
1. Limitations of Structures usage
2. When to use Structures and when not to use them in Query Designer
Thanks in Advance
Regards
AVS ReddyHi,
Structures in Query designer are reusable across all the queries for particular info provider once you save in the query designer.
Also check the below links for more info:
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
Reg
Pra -
Reg:structure of infotype table
Hi,
Can i get the details regarding the structure of infotype .......
(ie table structure,,screeen structure so on)..
Thanks & Regards
shiva ramHi Shiva,
Following are the components of infotype ..
tables
screen
modulepool
infotype number
time constrain.
Tables:
Table with naming conversion paxxxx is created ,where xxxx infotype number (9999).
which includes
pakey-intilisation data
pshd1- log details
psxxxx-contains actual fields of the infotype
ci_pxxxx--exits for standard infotypes ..for
enchancements....
apart from these it includes pxxxx--structrure of infotype.
and qxxxx.-screen fields for the infotype..
screeen
For very infotype there exists 3 screens
1000--intilisation or dummy screen
2000-where actual the user enters the data
3000 -list or orview screen.
Module pool
exits module pool program with naming conversion
MPXXXX00.....where xxxx is infotype number...
which consists of 5custom includes and 3 standard includes....
Custom Includes are
MPXXXX10---INTIALISATION
MPXXXX20--DEFAULT VALUES
MPXXXX30--VALIDATION
MPXXXX40--SUBROUTINES
MPXXXX50--LIST OR OVERVIEW SCREEN.
Standard Includes
MPPDAT00------INTILISATION SCREEN
MPPERS00---PBO/PAI FOR STANDARD INFOTYPE
FPP50PSB --BUFFERING THE INFOTYPE
Thanks & Regards
Suman -
Hi,
We are populating SAP ISU via Emigall and proposing to replicate all customer data including BP, CA and Contract and all technical master data including CO, Premise and Device. This is a lot of objects and data to replicate from ISU to CRM which will mean our migration takes a long time.
Are there any other options to populating data into CRM? Would you advice LSMW load into CRM and Emigall load into ISU?
KR,
MichelleHi we are proposing to use Emigall (Data migration workbench) to load the following into ISU:-
BP
CA
Contract
CO
Premise
Device
Reg Structure
Documents
Dunning etc
We are proposing to use CRM middleware to replicate the following objects from ISU to CRM:-
BP
CA
Contract
CO
Premise
Device
My concern is that the replication from ISU to CRM is very slow and will be our bottleneck during migration weekend. I am looking for ways to speed up this replication including alternative ways of populating CRM.
KR,
Michelle -
hi frnds
My requirement is below
I have created a BOR object in ISU which is related to CRM order item
and in which the import parameters are date and status
now when i enter them and execute object then according there should be reflected in CRM program crm_order_read but i dont know why these are not reflected
i have also checked the FM it is retueming the correct values to CRM
Can anybody has reason why these are not reflected.Hi we are proposing to use Emigall (Data migration workbench) to load the following into ISU:-
BP
CA
Contract
CO
Premise
Device
Reg Structure
Documents
Dunning etc
We are proposing to use CRM middleware to replicate the following objects from ISU to CRM:-
BP
CA
Contract
CO
Premise
Device
My concern is that the replication from ISU to CRM is very slow and will be our bottleneck during migration weekend. I am looking for ways to speed up this replication including alternative ways of populating CRM.
KR,
Michelle -
Dear experts,
I have a problem and I need help to find a solution to how upload a huge file of training historical data.
I've tried to create a LSMW using transaction LSO_PV00, but it doesn't wok.
I've also tried to create relationship between E - P, I was able to create it, but these relationships are not displayed in LSO_PSV1 and when I try to follow up the event I get a short dump.
Does anybody has a good solution to upload training attendances?
Thanks in advance!
Best regards,
ThaisHi Thais P Pietscher
Make sure that first upload all Objects (Business Event Group, Business Event, Course Group, Course, Participants etc.)
Then Relation between objects reg. structure upto Business Event Group, Business Event, Course Group, Course.
Check it everything is fine in the structure.
Then upload booking data between participant and course.
Regards
Venu -
Reg: consistency check in recordset structure validation
Hi all,
I am doing FCC to FCC scenario, i am getting this error. Help me out, it is very urgent for me.
Sender Adapter v2723 for Party '', Service 'bs_text2text':
Configured at 2007-08-21 08:00:49 UTC
History:
- 2007-08-21 09:29:06 UTC: Retry interval started. Length: 2.000 s
- 2007-08-21 09:29:06 UTC: Error: Conversion of complete file content to XML format failed around position 0: Exception: ERROR consistency check in recordset structure validation (line no. 87: missing structure(s) in last recordset
- 2007-08-21 09:29:06 UTC: Processing started
- 2007-08-21 09:29:04 UTC: Error: Conversion of complete file content to XML format failed around position 0: Exception: ERROR consistency check in recordset structure validation (line no. 87: missing structure(s) in last recordset
- 2007-08-21 09:29:04 UTC: Processing started
Regards,
Ajay.Hi Ajay,
Problem with the file content conversion parameters you specified in the sender file adapter.
Do let us know your DT structure and FCC parameters specified in adapter.
Regards,
Sumit -
Goods issue not updating in teh standard SAP structures -reg
Hi,
I have three questions to get your support
1. For repetitive manufacturing GR is updated in the SAP standard structure S225 and GI in S226
Like this in discrete where GR and GI happen with reference to production order ,where the data is
updated ?
2. I have done GI 261 movement for a production order and document got posted
But i am not getting this in any of the below transactions
MCP1
MCP5
MCRE
MCP3
MCRI
What could be the reason ? i have checked in posted document also where it showing 261 movement
details
3. further using COIB i have linked the serial numbers of BOM header and BOM component and saved
next time when i go to COIB how to see the earlier assigned serial numbers details
for report purpose which tables and fields are to be used
once i assign serail numbers next time where can i go and see that
expecting positive inputs from all you friends .....
regards,
madhu kiranmark as answered
-
Reg:working without Keyfield in FCC node structures
Hi All,
I have a scenerio of FCC to RFC , where i need to read a Text file and want to post it to R/3 through RFC
Recordset Structure : Header,1,Item,*,Trailer,1
Is it possible to read the file without Keyfield vale ?
Please give your valuable suggestions.
Thanks & Regards,
S.K.Karthikeyan.Thanks for the inputs folks....
According to our requirement, we have different no. of line items for each node viz. Header, Item and Trailer out of which Item occurs n number of times.
In this case, we have done the FCC using a keyField value itself.
Cheers,
Karthi -
MM Organizational Structure mapping - Reg.
Dear Experts,
Kindly provide me some guidelines for mapping MM org. structure in SAP. Let me brief the scenario in the today's situation.
Company Code - Two(1000, 2000)
Plants - Four(1,2,3,4)
Under Company Code 1000(one separate accounts book), Plants 1, 2, 3 are operating.
Under Company Code 2000(one separate accounts book), Plant 4 is operating.
Purchase org. - One central is available.
Within Plant-1, plant 1 is having 4 different production processes. Like wise, plant 2 & plant 3 also have 2 different processes individually. Plant 4 which is under company code 2000 is having one single production process.
The above scenario has to be mapped in SAP. My doubt is,
do i need to create individual plants in SAP for all the production processes happening within one plant?
Or it can be mapped as existing today?
What will be the advantages & disadvantages?
While creating plant in SAP, what are all major points needs to be focused?
How to map, purchase organizations? Plant specific or company code specific? For info., Domestic & Import purchases are happening.
Kindly give me your valuable inputs.
Thanks & Regards,
Kumar.
Edited by: KUMAR LP on Dec 6, 2010 10:53 AM
Edited by: KUMAR LP on Dec 7, 2010 5:25 AMHi Kumar
do i need to create individual plants in SAP for all the production processes happening within one plant?
Ans: Yes You need to create individual plant in the syestem
Or it can be mapped as existing today?
What will be the advantages & disadvantages?
The advantahge will be simplified process, and You can Transfer material from one plant to another while using STO
Q: While creating plant in SAP, what are all major points needs to be focused?
Ans:Make sure you assign right plant to right compony code and, assign right factory calander
How to map, purchase organizations? Plant specific or company code specific? For info., Domestic & Import purchases are happening.
Ans: Make 2 purchasing Org,
1 P.org will assign to compony code
2 will assign to all plants -
Reg:Include structure in a ztable
hi Gurus,
I created a structure which contians field types,sub-structures&table types ,now i want to include this structure to a ztable.I am encountering with an error .
Some Error are mention below:-
1)Select a shorter name for REASON_FOR_CHANGE
2)SECTION is a reserved word (Select another field name)
3)Field ILID: Structured type ZDCAGS_ILID cannot be used in DB table ZDCAGT_TSK_CNSLT
4) Field TEXT: Structured type ZDCAGT_TLINE cannot be used in DB table ZDCAGT_TSK_CNSLT
5)Field VARIAN: Structured type ZDCAGS_ILID cannot be used in DB table ZDCAGT_TSK_CNSLT
6)Field REASON_FOR_CHANGE: Structured type ZDCAGT_TLINE cannot be used in DB table ZDCAGT_TSK_CNSLT
7)Error in code generation for creating table ZDCAGT_TSK_CNSLT in the DB
and the environment is ECC 6.40.
please suggest if any.
thanks in advance,
RameshHi Ramesh,
I have some Solutions,
1. Reason_for_change - Its field name means Give a shoet name.
2. Section is reserved for SAP. So Select another word.
3. The structure of the three fields are differed. So You can't use this Fields.
Check this..
Thanks.
Reward If Helpful. -
Reg Keyfigures data type in Transfer structure
Hi Guys,
When we create a transfer structure for a falt file source system, keyfigures data type is getting converted into CHAR automatically and even the length is assigned . Whats the reason behind this?? How do we get the lenght of a keyfigure?Hi Reddy,
CSV stands for "Comma Separated Value". This file format is often used to exchange data between disparate applications. The file format, as it is used in Microsoft Excel, has become a pseudo standard throughout the industry, even among non-Microsoft platforms whereas
<u>ASCII codes</u> represent text in computers, communications equipment, and other devices that work with text.
<u>The CSV File Format</u>
Each record is one line ...but
A record separator may consist of a line feed (ASCII/LF=0x0A), or a carriage return and line feed pair (ASCII/CRLF=0x0D 0x0A).
...but: fields may contain embedded line-breaks (see below) so a record may span more than one line.
Fields are separated with commas.
Example John,Doe,120 any st.,"Anytown, WW",08123
Leading and trailing space-characters adjacent to comma field separators are ignored.
So John , Doe ,... resolves to "John" and "Doe", etc. Space characters can be spaces, or tabs.
Fields with embedded commas must be delimited with double-quote characters.
In the above example. "Anytown, WW" had to be delimited in double quotes because it had an embedded comma.
Hope it helps...let me know
regards,
R.Ravi -
Reg: Enterprise structure in Tree format
Hi Gurus,
What is the transaction code to check the entire enterprise structure of a company code?
REgards,
R.KHi,
Please use t.code EC01. > click on the company code for which you want to see the tree structure.
alternatively to see tree structure from other organizational obejcts you can t.codes starting from EC01 onwards to EC16.
Please go to SE93 transaction and give EC* and press F4. You get list of all t.codes starting with EC.
regards
sadhu kishore -
Remove Structured Anchored Frame without disturbing the XML Structure - Reg.
Dear All,
Please any one help me!, How to remove the xml Structured Anchored Frame without disturbing the XML Structure.
Manually If I'm removing the XML Structured Anchored Frame, the XML Structured is gone.
I tried so many ways. If I am removing manually in Grouped Frame, then this problem is not happens.
I mean, Create 2 separate frames Move any xml structured contents to that frames. Group that 2 frames and make it anchored.
Now you can remove that anchored, this xml Structure is not disturbing (I mean not removed).
If I did the same in above method for Single Text Frame, this xml Structure is gone.
Kindly any one person resolve this problem, Thanks in advance!!!
Note:
(1) I tried through in InDesign CS6 Plug-In, this is working perfectly. But I need in Javascript to do this.
Thanks & Regards
T.R.Harihara SudhaNHm – if you can do it with a Group object, why don't you wrap around a group object?
With ExtendScript it's quite possible to create Groups with only one single object.
If we have a text frame selected, you could add a "helper" rectangle to the spread.
Group the text frame and the rectangle, then remove the rectangle from the group.
Now you have a Group with a single text frame.
var myTextFrame = app.selection[0];
var myHelperRectangle = app.documents[0].layoutWindows[0].activeSpread.rectangles.add();
var myGroup = app.documents[0].layoutWindows[0].activeSpread.groups.add([myTextFrame,myHelperRectangle]);
myGroup.rectangles[0].remove();
app.documents[0].select(myGroup);
Uwe -
Reg:Cost Component Structure
Hi Guru's
In the Cost Compenent Structure T.Code:OKTZ I Select Primay Cost Component Split,
I Excuted Two Standard Cost Estimates one is with out Primary Cost Component Split, and Secound one with Primary Cost Component Split
But I can't see the Difference for both Standard Cost Estimates....
where we can see the Diffierence exactly for with and without Primary Cost Component Split...
Rgds
U.SRINU
SAP Pratice (FI/CO)Hi Srinu,
Go through the following thread to understand the purpose of Primary Cost Component Split...
Re: Primary cost component split
If you have understood the details from the above thread, go through the following...
If you want to go for Primary Cost Component Split, the following sequence MUST be followed...
1. Activate Primary Cost Component Split in OKTZ,
2. Mention your Cost Component Structure name (for ex: 01) in your Version Maintenance in OKEQ
( In OKEQ, select your Version, Go to Controlling Area settings, go in to Settings for Fiscal Year. In "Price Calculation" Tab, you will find the field for Cost Component Structure).
3. Upload the Cost Center Planning Data using this Version.
Now, what you might have tested is that, you have done the Cost Center Planning as usual ( I guess you missed the above sequence, especially point no.2) and you run the Std Cost Estimate. After that, you have Activated the Primary Cost Component Split and you might have run the Std Cost Estimate. Obviously, you will not find any difference in that case.
I have used Primary Cost Component Split in couple of my implementations and it worked fine.
Revert back if you need further explanation in this regard....
Srikanth Munnaluri
Maybe you are looking for
-
Well, first of all, I was tying to create a web-based computer game in Notepad in H.T.M.L., C++, and JavaScript codes. But when I tried to open the completed product, Firefox only came up with a blank page. What do I do with this? And also, I unwitti
-
My iphone4 was dropped into water in dammam
where i have a replacement of iphone4 for water dropped unit in dammam saudi arabia. please help me. <Personal Information Edited by Host>
-
Help! Trying to use Airport Express to extend existing network
Computer Illiterate here. I have an Airport Extreme base station and am connected to the internet. I have been trying to extend my network using an Airport Extreme. I previously had the network set up like this, but after my DSL line was cut, and goi
-
Hidden "Primary File" field in Content Profile
Hi all, I want create my own Content Profile not have the +"Primary File+" field. Can I do that??? Thank you so much!
-
getting this error in ENTER RATE/USD rate type Mfor date in the system settings. this error after execution of fumction module "CONVERT_TO_FOREIGN_CURRENCY" what can be the problem..