Reg Tabstrips

Hi all,
I have an selection screen with four tab strips
Each tabs with 5 radio buttons
When i select a radiobutton from second tab execute and come back
the control is set to again first tab
ie First tab is set as active tab
But i need it to be on the same tab where i clicked it
the o/p is an ALV report
Thanks in advance
Regards,
Balaji

Hi,
Try to catch FCODE for tabsrtip on which you click in event user command and handle it in event "At selection screen".
i.e. once you click radiobutten and execute after pressing back button check the catched FCODE and call subscrren for that.

Similar Messages

Reg: Tabstrip tab text change through program.

Dear all,
I am using tabstrip in my program, my requirement is to change the text of the tab dynamically in the program .
please help me in this regard.
thanks in advance.
Haritha

can u please make it clear that u want to change tab text when u click on any button
or mouse move
regards
anil

Reg: Selection screen tabstrip

Hi all,
I need to create a screen with tab strip and inside the tab it should hold a subscreen containing text element and checkbox and a button.
This is to be done using the selection-screen begin of screen method and not as a module pool.
SELECTION-SCREEN BEGIN OF SCREEN 9000 TITLE title.
SELECTION-SCREEN: BEGIN OF TABBED BLOCK mytab FOR 10 LINES,
 TAB (20) button1 USER-COMMAND push1,
 END OF BLOCK mytab.
SELECTION-SCREEN END OF SCREEN 9000.
I tried by above way but it's going to dump.
Kindly help me on this by providing a sample code as to how to go about it.
Thanks in advance,
Krithika

Hi
Sample programs:
DEMO_DYNPRO_TABSTRIP_LOCAL Tabstrip Control - Scrolling at SAPgui
DEMO_DYNPRO_TABSTRIP_SERVER Tabstrip Control - Scrolling at Application Server
DEMO_SEL_SCREEN_IN_TABSTRIP Selection Screen as Subscreen in Tabstrip
DEMO_SEL_SCREEN_WITH_TABSTRIP Selection Screen with Tabstrips
SELECTION-SCREEN: BEGIN OF TABBED BLOCK selec FOR 17 LINES,
 TAB (23) button1 USER-COMMAND push1,
 TAB (23) button2 USER-COMMAND push2,
 TAB (23) button3 USER-COMMAND push3
 DEFAULT SCREEN 1001,
 END OF BLOCK selec.
SELECTION-SCREEN BEGIN OF SCREEN 1001 AS SUBSCREEN.
SELECTION-SCREEN END OF SCREEN 1001.
SELECTION-SCREEN BEGIN OF SCREEN 1002 AS SUBSCREEN.
SELECTION-SCREEN END OF SCREEN 1002.
SELECTION-SCREEN BEGIN OF SCREEN 1003 AS SUBSCREEN.
SELECTION-SCREEN END OF SCREEN 1003.
Initialization
INITIALIZATION.
button1 = text-det.
button2 = text-sup.
button3 = text-mef.
selec-prog = sy-repid.
selec-dynnr = 1001.
selec-activetab = 'BUTTON1'.
Managing the keys
AT SELECTION-SCREEN.
CASE sy-ucomm.
 WHEN 'PUSH1'.
 selec-dynnr = 1001.
 selec-activetab = 'BUTTON1'.
 WHEN 'PUSH2'.
 selec-dynnr = 1002.
 selec-activetab = 'BUTTON2'.
 WHEN 'PUSH3'.
 selec-dynnr = 1003.
 selec-activetab = 'BUTTON3'.
ENDCASE.
2) DATA flag(1) TYPE c.
SUBSCREEN 1
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p1(10) TYPE c,
p2(10) TYPE c,
p3(10) TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN END OF SCREEN 100.
SUBSCREEN 2
SELECTION-SCREEN BEGIN OF SCREEN 200 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: q1(10) TYPE c OBLIGATORY,
q2(10) TYPE c OBLIGATORY,
q3(10) TYPE c OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF SCREEN 200.
STANDARD SELECTION SCREEN
SELECTION-SCREEN: BEGIN OF TABBED BLOCK mytab FOR 10 LINES,
TAB (20) button1 USER-COMMAND push1,
TAB (20) button2 USER-COMMAND push2,
TAB (20) button3 USER-COMMAND push3
DEFAULT SCREEN 300,
END OF BLOCK mytab.
INITIALIZATION.
button1 = text-010.
button2 = text-020.
button3 = text-030.
mytab-prog = sy-repid.
mytab-dynnr = 100.
mytab-activetab = 'BUTTON1'.
AT SELECTION-SCREEN.
CASE sy-dynnr.
WHEN 1000.
CASE sy-ucomm.
WHEN 'PUSH1'.
mytab-dynnr = 100.
mytab-activetab = 'BUTTON1'.
WHEN 'PUSH2'.
mytab-dynnr = 200.
mytab-activetab = 'BUTTON2'.
ENDCASE.
WHEN 100.
MESSAGE s888(sabapdocu) WITH text-040 sy-dynnr.
WHEN 200.
MESSAGE s888(sabapdocu) WITH text-040 sy-dynnr.
ENDCASE.
MODULE init_0100 OUTPUT.
LOOP AT SCREEN.
IF screen-group1 = 'MOD'.
CASE flag.
WHEN 'X'.
screen-input = '1'.
WHEN ' '.
screen-input = '0'.
ENDCASE.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDMODULE.
MODULE user_command_0100 INPUT.
MESSAGE s888(sabapdocu) WITH text-050 sy-dynnr.
CASE sy-ucomm.
WHEN 'TOGGLE'.
IF flag = ' '.
flag = 'X'.
ELSEIF flag = 'X'.
flag = ' '.
ENDIF.
ENDCASE.
ENDMODULE.
START-OF-SELECTION.
WRITE: / 'P1:', p1,'Q1:', q1,
/ 'P2:', p2,'Q2:', q2,
/ 'P3:', p3,'Q3:', q3.
Reward if usefull

Reg: Refresh in a TabStrip

Hi All,
We are using a TabStrip with 5tabs, each tab contains Forms. when we enter data in tab1, click on 2tab and come back to 1tab data entered remains same.
It's not refreshing the data. I tried view.viewreset in ModigyView, but does not make any difference. Please help me to refresh the data.
Thanks
Nagaraju

Hi,
Are you using ViewContainer UI?
Try to invalidate the node mapped to your UI elements.
wdContext.node<NAME>.invalidate();
thanks & regards,
Manoj

Reg: Onclick events in tabstrip

Hi experts,
I have created an application with a view whcih has tabstrip. This holds the other views embedded in it for each tab.
Inside the each views, there are buttons to allow naviagiton for before the current tab and as well as to the next tab.
On click of this button, how should the code be incorporated as we cannto use inbound / outbound plugs for this case.
Please help on this.
Thanks.

Hi,
I think, you have other views embedbed in other TABS.CReate a attribute for TAB selection and bind it to the SELECTEDTAB
When you are in first TAB, upon those buttons handler,
You can set the attribute to 2nd TAB.
As I have achieved the same.
Hope this is clear. Then you dont require any plugs right.
***Set the selected tab value
CALL METHOD WD_CONTEXT->SET_ATTRIBUTE
    EXPORTING
      VALUE = lv_select_tab
      NAME = 'SELECT_TAB'. "Set the selected tab Id
Im able to switch bewteen tabs of a tabstrip.
Regards,
Lekha.
Edited by: Lekha on Oct 16, 2009 3:11 PM

Reg: Adding BUTTON to tabstrip

Hi ,
Iam unable to add BUTTON to tapstrip , "Add Elements to Tab" is disabled.
(My tab strip contains 2 tabs , i want to add it to first tab).
please help.
Regards
Sriinivas
Edited by: cnu_2010 on Jun 29, 2011 9:18 AM

Basically you can add buttons to UWL. The problem will arise when you want the button to do something sensible. I don't think that there is some standard Export to Excel action available. Of course you could do some custom development.
Regards,
Karri

Dynamic tabs in the tabstrip

Hello All,
I am trying to populate dynamic tabs using the function module
TAXI_INITIALIZE_CARRIERSCREEN. Using this FM we can populate at the max 32 tabs.
My requirement is to place more than 32 tabs in the tabstrip.
Is there any other function module which is used to populate tabs.
Or any other solution for this.
Thanks in Advance.
Regards,
Suganya.

hi,
i need help on TAXI_INITIALIZE_CARRIERSCREEN. i want to know how to use this
say, i have created a tabcontrol in the screen painter with function code and reference field. i want to change the text dynamically during runtime.
can i use this function.
Moreover , say,
tabcap-TAB01 = 'TOTAL'.
tabcap-TAB02 = 'SIZEE'.
*TABSTRIP_NAME
CALL FUNCTION 'TAXI_INITIALIZE_CARRIERSCREEN'
EXPORTING
    tabstrip_captions       = tabcap
GUI_PROGRAM             =
GUI_STATUS              =
GUI_TITLE               =
GUI_TITLE_PARAM         =
In the above where do i specify the TAB Strip control Name.
i dont know how to pass on the export details for GUI_PROGRAM and rest of it. kindly help me
regs,
raja

How to add contents to Tab in TabStrip

Hi All,
My requirement is to display a screen/view as a content to a TAB when user selects any tab in the Tab Strip. I have developed screens for each tab seperately.
Can any one tell me how to achieve this in web dynpro.
Many Thanks.
Regs/Venkat

hi
>First insert tabstrip ui
>Right click tab strip ui and select insert Tab
>Expand the Tab and select the Tabs_content and right click the tab content and select insert child and select the ViewContainerUIElement
>In the Web dynpro Explorer View,expand the Project structure and select the Windows in the components.In the windows select ur window and expand it.
where u can see the view container you have inserted in the tab
>select the view containeruielement and right click it and select the Embed view and select the view which you want to embed
hope this helps,
Regards,
Arun

TABSTRIP Control - Input event

Hi,
I'm quite naive to GUI based programming. My question reg. Tabstrip control is, 'Does selecting a Tab trigger the PAI modules?'. It doesn't seem to and the Active Tab, value is not stored correctly in the Global variables (I used wizard to create the controls).
So, on refresh of control, it displays the first tab always. Can anyone help me out on this?
Thanks & regards,
Sree

Check this code sample
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap-code-samples/alv-grid/abap code sample for tab strip in alv.pdf
In this part u can change the default tab by passing the corresponding tabname
CONTROLS: main_tab TYPE TABSTRIP.
DATA: BEGIN OF i_main_tab,
subscreen LIKE sy-dynnr,
prog LIKE sy-repid VALUE
'ZZZ_TEST',
pressed_tab LIKE sy-ucomm VALUE c_main_tab-tab1,
Change this bold part so that u can change the default tab.
END OF i_main_tab

Error in creation of Tabstrip Control

Hi Guy's
Please help me i created one sample tabstrip, when executing this program i am getting error message" SQL Error in the database when accessing a table". Pasting my code here please help me where i did mistake. it is very urgent.
1) IN SE-38
tables : kna1.
data : begin of itab occurs 0,
land1 type LAND1_GP,
name1 type NAME1_GP,
end of itab.
*& Module USER_COMMAND_0100 INPUT
case sy-ucomm.
when 'DISP'.
select land1 name1 from kna1 into itab where kunnr = kna1-kunnr.
append itab.
endselect.
when 'EXIT'.
leave program.
endcase.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0110 OUTPUT
MODULE STATUS_0110 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
MOVE-CORRESPONDING ITAB TO KNA1.
ENDMODULE.
2) IN SE51-Fow Logic and layout of Screen 100
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN SUB INCLUDING 'ZSHANTHU1' '110'.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
CALL SUBSCREEN SUB.
3) In the screen -110 Flow logic and Layout
PROCESS BEFORE OUTPUT.
MODULE STATUS_0110.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0110.
Edited by: sai shanhu on Apr 11, 2008 1:32 PM

Hi,
From the message it seems either you are using wrong company code in Organisation data of the PO or the company code need to be assigned to country in spro-enterprise structure-Financial accounting-edit copy check company code.
Please check this.
Dhruba

Mail can't send email from 123-reg accounts

Hi all,
I've got an issue with Mac Mail can’t send email from 123-reg accounts.
I know there is a lot of articles on simular matters and some I have tried out with no luck, others are just speaking a whole other language.
Any help would be greatly recived, here's my situation below:
Running a iMac 2.8GHz Intel Core i5 on OS X 10.8.3
I’m using 3 accounts on Macs Mail client, one is my iCloud account that is working fine and the other two are my 123-reg accounts that I use for business purposes. I’ve been working like this for a couple of years now and about 6 months ago I upgrade my operating system from Snow Leopard to Mountain Lion.
2 or 3 months ago I randomly got a problem where I was unable to send any emails from my 123-reg account, I could only receive emails. I checked my settings and they were all correct and unchanged so I attempted to delete them and recreate the account but with no such luck.
I then decided to check if it was a problem at 123-regs end and attempted to log into web mail. This worked and was able to both send and receive emails so eliminated that possibility.
I also have these accounts set up on my iPhone, so checked if there was any issues and everything was working fine. I then checked my iphone details and made sure the same was on my desktop and still no such luck.
I’ve tried out some of the articles I’ve found on here (the ones written in plain English) still no results. I’m not very IT illiterate and just wondered if anyone else has got any ideas, whether there is something specific with 123-reg accounts and Mac Mail?
Many thanks.

Thanks
I just had another hunt around looking at posts and discovered that it was because I recently changed to BT Infinity and they had a block on.
I didn't even think to question the ISP.
https://discussions.apple.com/message/21173608#21173608

Reg: Message and BPM

Hi
I'm having a scenario where i use a JDBC adapter to extract data from a DB. As a result of the query say, 10 rows are returned as message to XI server. I have a transformation (BPM) set and the receiver(target system) is a file. When i open the file to see its contents i can see only the first record been transfered. The mapping part used for the transformation node is having IF condition. But all the fetched records satisfies the conditions in the mapping.
Pls let me know the corrective step.
reg: Prabhu

Hi,
1)Check the input XML i.e all 10 records are coming into XI . This you can check in SXMB_MONI
2) Then you can test the mapping in the integration Reposiotry .. So now you can get if any mapping problem. For this , check is the occurence of target strcuture is 1..n or 0.n
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
3) If mapping is correct , then check the RWB->Message Monitoring->Message Display Tool and check the payload.
4) If this is correct, then check the File COntent Conversion of the Receiver File Adapter.
Hope this helps,
Regards,
Moorthy

Reg: How to Stop Polling of JDBC Adapter without Scheduling the adapter

Dear Gurus,
Here I am having one requirement. My clients wants to send data from JDBC adapter (ORcale System table) to R3 system via RFC.
His Requirement::
1. He is not telling the time of data flow from Oracle server so that based on that we can schedule the adapter in the Communication Channel monitoring (Availablitiy Time Planning) or Else we can Schedule by deciding the setting of the polling interval time.
2. He is telling that When ever he waants to send the data he will place one dummy file in the File Adapter FTP location so that it will became an Indication for u to poll the jdbc adapter and to transfer the data to R3.
3. Untill he keeps the file or gives indication he doesn;t want to communicate with Oracle server due to some security and it s a most important data base he doesn't want to disturb that Oracle Server as so many business are running on that.....
We Proposed::
1. Atleast you need to tell the scheduling time or poll interval time so that we can schedule our adapter.
but he s not accepting for this
2. Atleast U need to give access for Data base to enter one more extra field like STATUS CODE so that we will add one number and we keep on Update in the Update table and based on that Update table statement it will poll.
but he s not even accepting for this
3. Finally we prposed that to create another table in the Oracle SYstem as Dulplicate Table which is similar to Standard Orginal table when ever he wants to pick the data please keep that data in this Duplicate TABle so that JDBC adapter will pick the data from thsi TABLE instead of picking the data from that standard table so that it will not effect any standard table data in the table.
but he s not even accepting for this
We have done some R & D:::
1. WE approached even through BPM and via switch conditions is one scenario
 FILE RECEIVE >SWITCH CONDITION> RECEIVE AND SEND or else EXIT
2. Using correlation in anotehr scenario means correlating File adapter and JDBC and based on one dynamica value it will goes to SEND STEP ( RECE IVE --> RECEIVE --> SEND STEPS )
Even though we know this...concept that...we jsut tried::
In BPM we can control the flow in XI 3.0 but we cannot Stop the Polling of JDBC adapter at backend because one the data comes from FILE adapter it will keep on HOLD untill it receives the JDBC from Oracle then based on the condition or Correlation it will goes futher SEND step means after that file adapter is picking file or not ...what ever it may be JDBC will polls at backend and brings that data to BPM"
Hence sugest me How to Stop Polling of JDBC Adapter without Scheduling the adapter or else using STATUS CODE Update statements in JDBC Tables
Regards:
Amar Srinivas Eli

Hi! All,
Finally I decided to do the scenario in two steps:
1: FILE REQ --> JDBC REQ -->JDBC RES --> FILE RECV
2: FILE RECV --> RFC
But I am getting issue while doing first scenario
Desgn :
I have created 2 Synchronous interfaces :
1) FILE 2 JDBC REQ
In this a) out put message is FILE Req
 b) Input msage:; FILE RES
2} JDBC2FILE RECV
 a) Output mesage;; JDBC REQ
 b) Input Msge :: JDBC Response
Mappings:
1) File REQ-->JDBC REQ
2) JDBC RES-->FILE RES
Interface mappings:
1: FILE 2 JDBC REQ--> JDBC 2 FLE RECV
CONFIGURATION ::
1: One Seder File CC
2: Two reciever CC's one is for JDBC RECEIVER and other s FILE RECEIVER
3; One Sender Agreement
4: 2 Recver agreements
5: One Interface Determination and
6: One RECCV Determination
My Question;;
1. First let confirm whether my development steps are right or not ?
2: Another thing s I am not sure reg Configuration Steps means
whetehr one interface determination and one Receiver Determinations are required or not as these are synchronous Interfaces
3: main Issue is::::
If my scenario s FILE2RFC2FILE then I will get RFC response automatically but here issue is this is JDBC
My reqquirement is By sending one Field from fILE to JDBC REQ it needs to send entire TAbLE records as a Response to file as XML
without having Sender JDBC how can I send the JDBC Res to FILE and If that is the case then again JDBC adapter is polling which is contradict to the client requuirement which i explained above.
pleas suggest me the Detailed steps mainly Colloboration agreements and logical routings and
also explain in detail if i can go for BPM
Also give cleear blogs but before giving make sure that it contains detailed screen shots because aIready gone thorugh
Scenario File-JDBC-RFC
File<-->JDBC Sync coomunication.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file(Without+BPM)
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
Regards::
Amar Srinivas Eli

Excise Reg at Depot

Hi all,
We have Excise REg no for Plant. But plant does not have Excise reg no.
Material is shipped to Depot with excise invoice. What is the procedure at depot for GR.
Do i need to capture the excise invoice?. From Depot, there is no excise invoice generated for customers.
thanks.

Hi,
Refer following link;
[J95 - Sales at Depot|http://help.sap.com/bp_bblibrary/500/HTML/J95_SaleDepot_EN_IN.htm]

How to set reg.cgi for VideoPhoneLabs

i start with stratus .i try set it to work with my dedicated apache server and sql but have no clue how to do it or where to put this file on my server.
i realy have probleme with reg.cgi
for now i did www/cgi-bin/reg.cgi and in the xml i set my websiteurl = "http://88..../cgi-bin/"
also how to complete reg.cgi for have it to talk with my db ?
here the reg.cgi file.
help please ...
#! /usr/bin/python --
reg.cgi by Michael Thornburgh.
This file is in the public domain.
IMPORTANT: This script is for illustrative purposes only. It does
not have user authentication or other access control measures that
a real production service would have.
This script should be placed in the cgi-bin location according to
your web server installation. The database is an SQLite3 database.
Edit the location of the database in variable "dbFile".
Create it with the following schema:
.schema
CREATE TABLE registrations (
 m_username VARCHAR COLLATE NOCASE,
 m_identity VARCHAR,
 m_updatetime DATETIME,
 PRIMARY KEY (m_username)
CREATE INDEX registrations_updatetime ON registrations (m_updatetime ASC);
# CHANGE THIS
dbFile = '.../registrations.db'
import cgi
import sqlite3
import xml.sax.saxutils
query = cgi.parse()
db = sqlite3.connect(dbFile)
user = query.get('username', [None])[0]
identity = query.get('identity', [None])[0]
friends = query.get('friends', [])
print 'Content-type: text/plain\n\n<?xml version="1.0" encoding="utf-8"?>\n<result>'
if user:
 try:
 c = db.cursor()
 c.execute("insert or replace into registrations values (?, ?, datetime('now'))", (user, identity))
 print '\t<update>true</update>'
 except:
 print '\t<update>false</update>'
for f in friends:
 print "\t<friend>\n\t\t<user>%s</user>" % (xml.sax.saxutils.escape(f), )
 c = db.cursor()
 c.execute("select m_username, m_identity from registrations where m_username = ? and m_updatetime > datetime('now', '-1 hour')", (f, ))
 for result in c.fetchall():
 eachIdent = result[1]
 if not eachIdent:
 eachIdent = ""
 print "\t\t<identity>%s</identity>" % (xml.sax.saxutils.escape(eachIdent), )
 if f != result[0]:
 print "\t\t<registered>%s</registered>" % (xml.sax.saxutils.escape(result[0]), )
 print "\t</friend>"
db.commit()
print "</result>"

Persistent binding is effectively provided by STMS (MPxIO) - is there anything in particular you're wanting to do that STMS doesn't provide?

Reg Tabstrips

Similar Messages

Maybe you are looking for