Reg Tax Codes and Plants

Hi Gurus,
1) I am creating a PO. It doesnt have a Material as it is a text req converted to PO. I am having 10 plants which uses various Tax codes which will auto populate according to the plants. Now my requirement is i want to populate a tax code (XX) for 8 plants i am using and (YY) for 9th Plant and (ZZ) for 10th Plant.
I dont have a material number. But i am having a Vendor Number, a Plant. We are not creating the PO's manually. This will be done by a Batchjob, so manually entering is also not possible.
2) Also i want to overwrite the Tax code which is populating automatically with the Tax code from PIR. Please advice where we will be maintaining the Config for Tax Code and Plant/Company code.
Please advice on this issue and how to proceed further.Thanks for your help in advance.
Thanks,
Sakkithyan

Hi,
If you want to default the tax code in the purchase order then create info record using transaction ME11..
If you want to default tax code in MIRO then do it using transaction OMR2..
Regards,
Chintan Joshi

Similar Messages

Reg: tax code and tax percentage

hi all,
i have tax code, from that how can i get the tax percentage
is there any table which maintain both tax code and tax %
thanks
suresh

Hi,
For calculating Tax you need to look into KONV table.
Based on the pricing conditions you need to calculate the Tax percentage.
you can just go the particular transaction for which you want to calculate the tax and there you
can find the prricing conditions declared under the tax based on which you will calculate the tax.
Regards,
Raj.

Deafult tax code and tax jurisdiction per vendor

Hi,
   We are using tax jurisdiction in Process, now while creating Po every time according to vendor we have to enter the tax jjurisdiction and tax code , i s there any mwthod with which we can set default tax code and tax juridiction code as per vendor means we want to maitain as per vendor code, so that for eah item i n that PO , tax code and jurisdiction code will come automatically.
I have also check by making the tax jurisdiction code mandatory in Vendor master , in vendor master i have added tax jurisdiction for the vendor but while creating PO, system is not selecting the tax jurisdiction automatically.
   regards,
    zafar
Edited by: zafar_karnalkar on Jun 4, 2010 6:18 AM

Hello,
Tax Jurisdiction code will be determined from the plant. Please check your Plant/Site Master. SAP provided a BADI ME_TAX_FROM_ADDRESS also to redetermine Tax Jurisdiction code based on custom logic.
For Tax codes, you have to maintain condition records for condition type NAVS using MEK1. There are many standard access sequences available to maintain this. You may also build custom one if needed.
Thanks,
Venu

Assign tax code for Plant

Hi experts
I would like to know assigning the tax code for plant.
Need to restrict use of tax code for other plants while processing ME21N.
Plants situated in different has different tax rates for which tax codes are created seperately. Then assign correct tax codes which will be used at the time creation of PO.
Regards
Raghu Shetty

Hi Ragu,
Regarding the standard behavior in tax in purchasing, please check
the detailed information in note 501054.
In F4 help of tax code, system display only the tax codes belonging
to country of company code used in PO. System display the tax code
belonging to any other reporting country is plan abroad functionality
is active in system. Please see information in note 708377
"Plants abroad is active and user tries to create a PO. In the PO at
invoice tab the F4 help for taxcode displays only the tax codes
belonging to the country of the company, whereas the tax codes belonging
to the special reporting country should be displayed."
For Plants abroad functionality, please see documentation at following
path.
Financial Accounting -> Financial Accounting Global Settings ->
-> Tax on Purchase Sales -> Basic Settings -> Plants abroad
Here you may find all the pre requisites and indications to set up thi
functionality successfully.
After activation of plant abroad, system asks for reporing country
before displaying the tax codes in F4 help.
F4 Help in ME21N at invoce tab will shows those tax values:
1. which are assignated to the Tax procedure of the plant
2. in which Field Reporting Country (T007A-LSTML) is filled.
Please see information in following note also.
1175497 F4 help MWSKZ in FB01 ME21N ME31K for CoCd w/o
Otherwise please check if EXIT_SAPMM06E_012 can serve the purpose.
I hope this helps you
BR
Nadia Orlandi

PO creation-ME21n-Why SAP does not check company code and Plant relation

Hi All,
Does someone know, why SAP does not check Plant and company code relation at the time of PO creation or how can we put validation between plant and company code at the time of PO creation.
Example: Suppose i have a company 0001 which is assinged to Plant 0001. when i am creating a PO with another company code 0002(Entering at header level-Org, data) and using Plant 0001 at line item level. SAP does not do this validation.
How can we put this check in place?
Thanks in advance.
Deepak

Hello Deepak,
There are three types of purchasing
- Company code specific :You need to assign company code to Pur organization
- Plant specific : You must assign plant to pur organization
- Cross company purchasing: No assignment between company code and pur organization.
In the case 3, the system will not check company code and plant relationship, but it will check plant and pur organization specific.
The following is the copy of sap help text:
You can assign a purchasing organization to one company code. This is company-specific purchasing.
You can assign a purchasing organization to no company code. This purchasing organization can then procure for all plants assigned to it, irrespective of the company code to which the plant belongs.
Since each plant must be assigned to a company code, the company code can be determined via the plant in each procurement transaction, even if the procuring purchasing organization is not assigned to a company code.
A purchasing organization must be assigned to one or more plants. This is plant-specific purchasing.
Now, check your company-code and purchase organization assignment.
Hope this helps.
Regards
Arif Mansuri

MM-SUS: SUS invoice creation without default tax code and no tax amount

Hello All:
When i create SUS invoice based on accepted GR(GR is transfered form MM per program RPODDELVRY and my system has implemented note#1351489) , the SUS invoice tax code in item is default from SUS customizing, but not from MM-PO item tax code. On the other hand, the tax amount is always zero even if i change the tax code and press "update price".
So then i press "send" to transfer SUS invoice to MM, system jump following 2 error messages:
Errors:Error in parameter transfer ( Item 1 )
Errors:Active status of document SUS Invoice 5000000035 is Incomplete . No changes are possible.
My SRM Server release 701, and business scenario is MM-SUS
In MM: customizing OBCA/OBCD/OMRY is completed
In SUS:customziing SRM server -> cross application basic settings -> tax calculation is completed.
            1.determine system for tax calculation --> R/3 tax calculation occurs in backend
            2.enter tax code --> I1 = 17% default sales tax, I2 = 13% sales tax
            3.Assign enterprise buyer tax code to FI system --> I1 = MM J1 , I2 = MM J2
Please advise what's the sulotion, thanks.
Regards
Joseph Chen
Edited by: chshix_1980 on Mar 30, 2010 5:56 AM
Edited by: chshix_1980 on Mar 30, 2010 6:05 AM

Hello ALL,
I am also facing same problem, although on different version SRM 7.0 SAPKIBKV06
We are having issues as stated below....
1) Tax code in PO line item should be defaulted while processing SUS Invoice.
As per the current behaviour SUS invoice tax code in item is defaulted from SUS customizing, but not from MM-PO item tax code.
2) In SUS Invoice the tax value is not getting populated even though the setting in IMG is R/3 tax calculation occurs in backend and for this all relevanat attributes related to purchasing org. BUK and ACS are maintained under PPOMA.
3) Finally when I try to post the invoice in SUS system get the below error message
Errors: Error in parameter transfer ( Item 1 )
Errors: Active status of document SUS Invoice 5000000XXX is Incomplete . No changes are possible.
All the relevant config is maintained
In MM: customizing OBCA/OBCD/OMRY maintained
In SUS:customziing SRM server -> cross application basic settings -> tax calculation maintained.
Appreciate your quick reply,
Thanks,
YR

Where can I find the relation between company code and plant?

where can I find the relation between company code and plant?
I need to the list of plants under a company code.
Which table?

yes,wayne weng .What you said is right.
Thank you very much!
My MSN:[email protected]

Bapi_Acc_Document_Post - E 018 : Invalid tax code and company code combination

Hi All,
I need the help of this forum once again.
I am using bapi Bapi_Acc_Document_Post to create KR documents in SAP. The bapi works absolutely fine except for one scenario:
For a particular type of invoice coded to Company "XXXX" with lines having tax code "I0", the bapi returns error message "E 018 : Invalid tax code and company code combination". The tax code "I0" and the company code "XXXX" has been mapped in SAP and if I try to create the invoice manually in SAP using the GUI, the invoice gets created without any issue.
I have tried searching the forum but could not find any post on this topic.
Therefore, requesting the masters to please help me out on this.
Best Regards
Sutirtha Roy

Hi Gowthami,
how have you solved your problem, because I am facing the similiar issue and trying desperately to post the following combination with BAPI_ACC_POST_DOCUMENT:
001 40       490100     Aufw. aus Marge PP              R2                 15,92
002 31       10000003   Kreditor                                R2                 15,92-
003 50       175060     Abzugsverfahren USt            R2                  3,18-
004 40       154060     Abzugsverfahren Vst             R2                  3,18
THANX!
Regards
Marko

Function Module to get Company code and Plant on the basis of infotype and pernr

Hi Experts,
I need to know the function module which will return company code and plant based on infotype and pernr(employee Number).
Thanks,
Salil Bagchi

I think thats the only way
CALL FUNCTION 'CU_READ_RGDIR'
 EXPORTING
 persnr = p0001-pernr
 TABLES
 in_rgdir = it_rgdir
 EXCEPTIONS
 no_record_found = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
check whether "Pay date for payroll result" with in Start Date and
 End date, and "Reason for Off-Cycle Payroll" is initial
LOOP AT it_rgdir WHERE paydt >= v_begda
 AND paydt <= v_endda AND
 void IS INITIAL
 AND ocrsn IS INITIAL
 AND srtza = 'A'.
 v_seqnr = it_rgdir-seqnr.
ENDLOOP.
Hope this helps.
Thanks
Kiran

Tax Code and Tax Amount Fields are not appearing

Hi to all,
While making Downpayment Request (F-47) Tax Code and Tax Amount Fields are not appearing in the screen.
for more clarity...
suppose PO is 1150 include all taxes ( Amount 1000+ Tax Amount 150)
as per agreement with vendor we need to raise DR for 1150 and based on DR we will make downpayment to vendor (F-48)
But in F-47 screen Tax Code and Tax Amount fields are not appearing.
Could any body help me on this??
Thanks in Advance
Regards,
Schilukuri

why you are looking for tax code field, pay gross amount as per PO, same amount will update in PO history as well as Vendor account.
Even if you find the tax code field and check the tax code check box, system will not calculate tax at the time of down payment or down payment request.
Please remember that by default standard SAP provides the tax code field in f-47 or F-48.

Withholding tax code and Withholding tax type relation

Hi All,
Here is my requirement:
I need to get the WT code description for the tax codes I get in BSIS (BSIS-QSSKZ). The problem is when I try to get the same from T059ZT, I need to have the two key fields WITHT (Indicator for withholding tax type) & WT_WITHCD (Withholding tax code).
But from BSIS I am having only the field QSSKZ (Withholding Tax Code)and not the WT type.
I need to know, how can I get the WT type based on WT code? I tried WITH_ITEM but its of no use, as it has both these fields as key fields.
Thanks in advcane.
Anand

Hi,
Hi,
I am working on an enhancement for withholding tax.
The withholding tax base has to be calculated in the exit.
I found that MRM_WT_SPLIT_UPDATE is the badi which can be implemented and can contain the logic for the calculation.
The transaction MIRO calls this BADI.But I need to call the BADI even for FB60,FB65,F-43,F-41 and F10.Is this part of configuration.Please let me know how to enhance the withholding tax calculation.
Thanks,
guest

Tax Code and Description

Hello All,
We are making a customized report based on vendor invoices.
1) Need to know tables or logic where we can find/pull out tax codes and its description.
2) When invoice is posted value goes to GR IR account, from which table i can get the GR IR value.
Regards
Himanshu Nijhawan

Hi Himanshu,
1) Need to know tables or logic where we can find/pull out tax codes and its description.
You can find the Tax code in RSEG Table for the Vendor Invoice. Specify the Document No & Year, you will get the tax code in the field RSEG - MWSKZ
Tax code Description can be obtained in the Table T007S. Specify Tax Code and Language as well to get the description
2) When invoice is posted value goes to GR IR account, from which table i can get the GR IR value.
For this, first you should get the Account document corresponding to the Invoice. So, Query table BKPF with the following fields to get the accounting document
Company Code
Year
Object Key (AWKEY) = Your Invoice No + Year (Concatenated Value for eg., 51000000002012
you will get the Accounting Document No in the field BKPF-BELNR
WIth the Accoutning Document & Year, query the table BSEG to get the GR/IR accounting posting. Generally the GR/IR is posted with Posting Key 86 (BSEG-BSCHL)
Regards,
Rama

Diff. between Tax Code and Condition Types

Hi,
What is the diff. between Tax Code and Condition Type???
Why we maintain Tax Codes under Invoice Tab in PO, when Condition Types are available for Calculation Procedure...???
Please guide..

hi..
Tax code : Tax code in some what more specific for calculating the tax...some material is having 2% tax..some having 3 % tax..etc..and these are input tax...so..these tax code will be of type input tax..
now..based on the nature of tax type amount will be calculated....
suppose tax code is calculation of 2 condtion type so ..we can do it in tax code conditon record fv11 also..
so..tax code can be a combination of cond type...
where as through cond type also we can also achieve this..by using one statistical cond type...
Cond Type : cond type is for the daily pricing configuration..how system will calculate the price for a centain material we can make define the rules here...
Try this out..
Thans

Which table contains both company code and Plant

HI,
Which table contains both company code and Plant?
which table contains Purchase requisition number and Company code?
Please help me.

plant and company code marc
MANDT MANDT CLNT 3 0 Client
MATNR MATNR CHAR 18 0 Material Number
WERKS WERKS_D CHAR 4 0 Plant
Purchase requisition number and Company code in ekpo
MANDT MANDT CLNT 3 0 Client
BANFN BANFN CHAR 10 0 Purchase requisition number
reward fi usefull

Tax code and Special equipment code

Hi All,
Our Tax Department brought to our attention the need to include a Tax Code and a Special Equipment Code to all fixed assets. We are loading balances from last year to new company code. Where do we include this tax code and Special equipment code.
Thank You,
Misbah

Hi,
1.     When you are transferring the balances of assets which are already in use in the business to the new company code, you have to use the non-taxable transaction codes for this transaction.
Create the tax codes in T.Code : FTXP .
You can configure these taxes in SPRO>Financial Accounting>Asset Accounting>Integration with the General Ledger>Assign Input Tax Indicator for Non-Taxable Acquisitions.
2.     Special equipment code for identifying these assets can be identified through the Eval group codes.
The Eval codes can be configured in SPRO> Financial Accounting>Asset Accounting>Master Data>User Fields>Define 4-Character Evaluation Groups
The Eval code can be assigned in the asset master. With this code you can classify the assets.
You can use an evaluation group to:
     Create reports on the defined evaluation groups
Access individual assets using a match code defined for the evaluation group
Regards
Prasad

Reg Tax Codes and Plants

Similar Messages

Maybe you are looking for