Reg To MOF question

I'm using V3 of RegToMof to inventory a specific registry setting on workstations. I added the MOF to hardware inventory in client settings. When I create collections, during my query rule creation I can see the class name of the registry settings
as one of the options to select however I do not see any values in the database. This tells me the clients have not inventoried the registry settings.
I have ran policy and hardware inventory numerous times. I have also waited a few days. Is there something I am missing in order to inventory a reg setting on clients?

last hardware scan was yesterday. I added the MOF file to hardware inventory a few days prior to that.
On the client hardware inventory, I see this (MAIN is the name of the reg class
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, KeyName, Anchor_Visitation_Horizon, ApplicationTileImmersiveActivation, AssociationActivationMode, AutoHide, Cache_Percent_of_Disk, Default_Page_URL, Default_Search_URL, Default_Secondary_Page_URL,
Delete_Temp_Files_On_Exit, DoNotTrack, Enable_Disk_Cache, ExtensionsOffPage, LocalPage, Placeholder_Height, Placeholder_Width, SearchPage, SecurityRiskPage, StartPage, Use_Async_DNS, x86AppPath FROM
Main
and right under that I see
Collection: Class "Main" does not exist.
it appears that \\root\cimv2 doesn't have a MAIN class. shouldn't the addition of the MOF file in hardware inventory have created that class on all of the clients?

Similar Messages

CR Max Report Processing Jobs Limit - reg hack not working

http://coil.sap.com/irj/boc/index?rid=/library/uuid/f053713e-3e3d-2c10-2a81-f79259e54023
I've followed the steps in the above PDF and my application's behavior has not changed.
My web app uses session, and calls .close and .dispose on last report when users go to load a new report (easier this way with the way the application is written).
We have a new, very powerful web server, so I've set the reg key in question to -1, restarted the box and I'm still getting the dreaded Crystal Reports Maximum Report Processing Jobs Limit after an hour or so of usage. True, we do have some complicated reports, but -1 is meant to remove all limits? Server is doing fine on mem/processor usage.
I using CRXIR2 runtimes (CrystalReports11_5_NET.msi) on the Win2k3r2 server, .NET 2.0
Why is the reg setting being ignored?

Hello,
To clarify also, you can set that number to anything you want but it is limited internally to 75. Anything more than 75 and the engine ignores it, same when setting it to -1, 75 is still the max. Ideally this should be set to 50, QA tested with 75 so that is what we set the default to in the registry. And to confirm, this is the number of jobs the RAS server can handle at one time, it is not the number of users that can send reports to be processed, the default is 3.
Also Jason pointed out the inProc RAS ignores the registry setting also, even though we read the key it's ignored if it falls out of usable range. There is also a Stand alone verion of Crystal Reports Server Embedded but it's for OEM Partners only. It runs as a Service and in CRSE 2008 you can have more than one server running. But not an option if you are not a Partner.
And as Ludek mentioned, you need to move to a supported high volume configuration. For this type of load I suggest you use the Full Business Objects Enterprise and change your code to use the Job Server to process reports. The job server will spawn a separate process for each report job and distroy the process when the job is complete thus releasing all memory associated with that job. RAS does not do this, it's a single process spawning separate threads for each job and therefore it does put excess loads on the CPU in your configuration.
Keeping 3 users in mind build in Report Job caching internal in your app. Your can application managing the report jobs is more efficient in this configuration than RAS doing it. We only hold onto the job for so long, 20 minutes is the default, and then we move onto the next job. So if any jobs fail it can cause problems which I believe is why you are having to cycle the WEB server. If you do this make it configurable/switchable so if you do migrate to BOE you must let BOE manage the jobs, it is designed to do this and managing it yourself may cause problems but this is all dependant on how and what parts you use.
Another option with BOE is you can have multiple RAS or Job Servers installed to take advantage of the hardware. This way you are not limited to one RAS server processing reports. We internally handle Round Robin job assignment. Example if you have 4 RAS servers running and RAS#1 is busy it will pass the job request to RAS#2, if it's busy it will pass the job to RAS#3 and then #4 and carry on until a RAS server is avaiable. If RAS#2 is then free it gets the job assigned to it and the next job is queued....
Thank you
Don

How to apply OSS note and how to use it?--thanks

Hi, morning all,
I want to know how to apply OSS notes and how to use it, pls help me.
Thanks.

Applying OSS note is a critical activity in the system. Usually this task is carried out by the basis, as they maintain the system and the notes, support packs, etc.
A OSS note has potential to impact the system in several ways. So it is better to work with the basis if you need to apply a OSS note to be applied.
Transaction code is Snotes. But pl dont attempt to apply by yourself.
Reg your other question as how to use the OSS note, there is nothing like using aOSS note. Just apply and depending on what the notes do, it may change the config, or download a program or something.
Ravi Thothadri

COPA vs. BCS design decisions (ex. profitability by customer in BCS)

We are trying to meet a business goal of identifying gross profit by customer.
We realize "customer" as a field in BCS is problematic, so we are thinking of only storing certain customers in BCS with a catch-all "Others" customer - with the goal of keeping the BCS data volume reasonable.
Consider the scenario: US company sells material X qty 1 to Spain company for 100 with cost of 30 (therefore profit of 70)
Spain sells same material X qty 1 to third-party customer for 120.
Spain from a local perspective profits 20, however the group from an overall perspective profits 90 ( the US revenues of 100 eliminate against the Spain COGS of 100 so you are left with revenue of 120, COGS 30, profit 90 - from the group perspective ).
We want to know how to see, on a customer level, the 90 profit from these transactions.
We do not believe COPA can do this, can this may be accomplished in BCS?
If you do a "one-sided" elimination (elimination driven by the revenue side only) of the intercompany revenue the system would not be able to reference customer on the elimination. We are wondering if this scenario of analyzing overall profit by customer can be accomplished by BCS functionality and are particularly interested in knowing what functionality you used to accomplish this requirement and in what sequence within the BCS close (BCS monitor).
Thank you in advance for any input you may have.
Also we are interested in any opinions/comments anyone may have about design decisions regarding BCS vs. COPA in BW. BCS business content identifies a sample design for a BCS data model including item, company, movement type, trading partner, functional area, etc. COPA (as configured in R3/ECC and extracted to BW) commonly features analysis by customer, material, etc. Considering BCS features elimination functionality, what design concerns have people faced with respect to fields that they include in both reporting systems? Obviously a prominent concern is sizing of the systems, but what common characteristics has anyone decided to feature in both systems? What considerations drove the decisions as to what common characteristics to feature in both BCS and COPA?

Hi John,
Reg, your last question - might be useful info in here, if you have not seen it yet:
Re: Reports using COPA cube, BCS Cube

ACS with patch L 6 and Name column issue

Has anyone experienced the following?
My customer has used the migrate tool to migrate users from the ACS 4.2 to 5.3. He has also applied the patch level 6. However under the Identity Groups listed names (the Name column)- from some - to half of the name is missing [e.g lets say the name contains the following information: “Dimension Data”], after migrating only “Dimensi” to be seen. He then removed the Patch Level 6 and reapplied with no success. Any advice or do I need to run to the TAC ••J
Thanks a lot
Lancellot Wendel

Hi Tarik,
thanks for the reply,
with reg to the question
"If you remove patch 6 and then migrate, does it work?"
No it did not work either, well I guess I have to open a TAC case for this.
thanks in advnace
regards,
lancellot

Doubt on configuration....!!!

Dear Friends,
Pls clarify my below doubt's
1. Do I need to configure sender XI adapter & sender agreement when my sender is a ECC system sending proxy message?
2. I have configured Business system for differnt clients of ECC and at runtime if both the system sends a same message type to XI, based on the logical & technical system details XI can know which BS has sent that message, but in case of two Business Service sends same message type, how will XI know which BS has sent message?
Thanks for your help....! ! ! ! !......!

Hi,
>>Reg my second question I am using webmethods as a sender. So I have configured two Business system for two different webmethods system. So if the both the webmenthods systems sends the same message type can XI know which system the message has been sent...?
If you have a business system for each of the webmethods then yes.
>>Also in case of receiver/server proxy, I need to configure receiver channel and receiver agreement... can I have two different receiver Proxy sytems by configuring different receiver channels and assigning to the respective scenario....??
Yes you need them and you can have two different systems as receivers.. there you need to specify the parameters in the XI communication channel
>>I assume that there is not need of creating sender channel & agreement when the sender system post message directly to integration server of XI... for ex when webMethods posts message directly to XI which is similar to ECC posting proxy message.... Please correct me if i am wrong....
yes you dont need them.. but i have a basic doubt.. why are you posting it as proxy, cant we have a normal HTTP post?
Regards
Suraj

Do we get any functional specs to work with BPS

HI All
I am new to BPS. I have gone through help.sap and learned how to enter plan data in real time cube (transactional)..... My doubt is when we work some where for BPS we cant just plan ourself.... Exactly what is the flow. Do we get any functional specs. How would be a requirement for plannings (say sales planning, costcenter, liquidity..........) Please explain me according to a real time basis...........
Regards
Naga

The program that you saw is a standard one; you just have to maintain files.
There are few other variables for variable exits, char rels; all nice documents and I suggest you go thru them.
Reg your other questions for plan scenarios - how to approach:
1.first you need to understand the relationship between various entities that are involved in planing , similar to the ER stuff in data modelling.
2.at what level planned is done; and the levels above that and the levels below that; the level at which the actual data is.
3. look at the master data; need not have to in SAP.
4. look at the historical plan data
Once you know the relationship between the entiries, say country and region. In BPS there is top down distrubuton and and bottom up aggregation. The distrubution is country to regions can be done either by top down or by a planing function where you distribute the data from country to regions by means of a business logic.
Always ensure you automate the planing functions to the extent possible. Deirve related characteristics rather than make the users enter related characteristics.
Ravi Thothadri

SCCM 2012 - Hardware Inventory Registry Import not working - Windows in the name of the Registry key

I downloaded the Reg to MOF tool and compiled some of our custom Registry Keys which worked fine. There was particular Key that didn't work and after some testing and messing around I realized why it isn't working:
The key I am using is: HKLM\Software\MyCompanyWindows
Because the key has the name Windows in it, it fails to import. I get the generic check the formatting for your MOF file error.
The MOF file you tried to import could not be compiled. Ensure that the MOF file contains valid data. You can use the command line mofcomp utility to test the data.
But if I run a MOFCOMP against the MOF I am trying to import it checks the syntax successfully.
If I change the key to MyCompanyWin or MyCompanyW it imports with no problem.
We have rolled out this key to almost every device in our organization and connected it to other inventory agents so there is no possibility of changing the key.
Is there any way to disable the validation check that SCCM is performing?

Hi,
If possible, could you please upload the MOF file to SkyDrive?
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Importing e-folders and Syncing Emails

I have recently purchased a MacBook Air (without outlook) and am currently accessing two email addresses in Mail. One a hotmail account and another from 123.reg. My question is that on my iPhone I was able to download my email folders and my email syncs real time but with the mac this does not seem to happen. I.e if I send a message from my hotmail on my iPhone it won't appear in my sent folder on my mac. I've spoken to one advisor who told me it's not possible with the mac. surely if I can get them all on my Apple IPhone and they sync up this should be possible on my MacAir or have I just spoken to the wrong advisor?!!!! Help please?

This is the way Apple has currently implemented Microsoft ActiveSync. ActiveSync on Windows Mobile allows you to pick which folders sync. Apple has decided to only sync the inbox in real time and all other folders require you to enter them first.
The AS protocol allows for more configuration options, but Apple is not using them or giving us access to them at this time.
All I can suggest is that you give Apple some feedback:
http://www.apple.com/feedback/iphone.html

Customizing CO-PA Account-Based Extractor

A requirement exists to customize our Account-Based CO-PA extractor. The Costing-Based extractor has been customized/appended but some team members have suggested that AB-PA extractor should not be. These would all be characteristics. Is there a problem with adding fields to this extractor - and if so, why? Any differences from adding to the Costing-Based? Thanks.

Don,
CE1 and CE2 tables are the ones to store actual line items and plan line items. I am pasting the relevant para from SAP help at the bottom of my msg.
Reg your other question, what level of summarization your users are talking about?
Ravi Thothadri
Physical Structure of the Data in CO-PA
The following sections describe the detailed physical structure of the data (physical insertion sequence) and the typical accesses of the dataset.
In the section Physical Distribution of the Data in CO-PA, we will propose a way to distribute the data effectively over larger areas (table spaces, hard drives, striping, and so on).
Documents
Actual line items are stored in table CE1xxxx (where xxxx = operating concern). The system inserts into this table on an ongoing basis (sorted according to time stamp of the insertion point).
In drilldown reporting, cost center assessment, etc., the system accesses the data by this time stamp. Thus the physical insertion sequence corresponds to the typical read access method.
Plan line items are stored similarly in table CE2xxxx and are accessed in the same way. Consequently, this table will not be referred to separately in the following.
Segment Level
The segment level -- CE3xxxx -- contains the data in its first summarized form. The profitability segment number and the period are key fields (along with additional technical fields: plan version, record type, plan/actual indicator, etc.). The data part consists of the value fields.
The data in the segment level is typically sorted by period when it is created (INSERT) and updated during the period. That is, the insertion sequence depends on the random order in which the business transactions occurred and is only sorted roughly according to period (or period block PERBL).
The typical queries search in the segment level with a few (approximately 100) fixed segment numbers (WHERE PAOBJNR IN <List> ...) and a condition of time (... AND PERBL IN ...). Thus the physical insertion sequence does not correspond to the typical read access sequence! The segment level is always accessed via the primary index CE3xxxx__0.
Segment Table
The segment table CE4xxxx contains a unique profitability segment number (the primary key) for each combination of characteristic values (data part) to which data has been posted.
The records are inserted in the order of the profitability segment numbers (albeit only approximately, due to buffering of the segment number assignment on the application servers) and are practically never changed.
Selections from the segment table can generally be divided into two groups:
Selections of large data volumes for drilldown reporting, planning or cost center assessment
Here the system finds all the profitability segment numbers whose combination of characteristic values meets a specified condition (e.g. in a drilldown report). If a suitable index exists, the system uses it to access table CE4xxxx. In that case the access does not correspond to the physical insertion sequence. If no suitable index exists, the system selects using the primary index. To read about how you can improve performance for this type of access, see Physical Distribution of the Data in CO-PA.
Determination of a profitability segment number based on the known combination of characteristics
In this case the system finds the profitability segment number when the values of all characteristics are known. To read about how you can improve performance for this type of access, see Index Support for Determination of Segment Numbers.

Basic question reg. distributed installatio

Hi everybody,
          i have a very basic question, for which i wasn`t able to find a simple
          answer/solution.
          I am planning to set up Bea in a distributed environment. the idea is
          to have a physical machine for the presentation, meaning
          webserver/jsp/servlets in the dmz1 and a machine with the application
          server holding ejbs in a different dmz.
          This results in an architecture where the presentation layer only can
          be contacted via http/https by the users and the logic layer
          communicates with the pres. layer via RMI/T3.
          Is there any documentation on such a setup ? any hints ?
          Thanks in advance, i'll keep on searching the dox.
          Berthold Krumeich


[att1.html]

Reg. some questions

hi gurus
i am placing some questions. i know that this is not right to place some 30 questions, but please take some time to answer so that we can benifit.
thanks
regards
sridhar
[email protected]
1. What is table partition?
2. What are the options available in transfer rule and when ABAP code is recquired during the transfer rule what important variables you can use?
3. How would you optimize the dimensions?
4. What are the conversion routines for units and currencies in the update rule?
5. Can you make an infoobject as info provider and why?
6. What are the steps to unload non cumulative cubes?
7. Give step to step approach to archiving cubex.
8. What are the load process and post processing.
9. What are the data target administration task
10. What are the parallel process that could have locking problems
11. How would you convert a info package group into a process chain?
12. How do you transoform Open Hub Data?
13. What are the data loading tuning one can do?
14. What is ODS?
15. What is the use of BW Statistics?
16. What are the options when definging aggregates?
17. How will you debug errors with SAP GUI (like Active X error etc)
18. When you write user exit for variables what does I_Step do?
19. How do you replace a query result from a master query to a child query?
20. How do you define exception reporting in the background?
21. What kind of tools are available to monitor the overall Query Performance?
22. What can I do if the database proportion is high for all queries?
23. How to call a BW Query from an ABAP program?
24. What are the extractor types?
25. What are the steps to extract data from R/3?
26. What are the steps to configure third party (BAPI) tools?
27. What are the delta options available when you load from flat file?
28. What are the table filled when you select ABAP?
29. What are the steps to create classes in SAP-BW
30. How do you convert from LIS to LO extraction?
31. How do you keep your self-updated on major SAP Develppments, Give an analytical example.

hi sridhar,
if u use this link, u can get morethan 75% answers...
http://www.sap-basis-abap.com/bw/sap-bw-interview-questions.htm
with hopes
Raja Singh

Reg: Questions on Personnel Management and Organization Unit ,

Hi Friends,
I have 2 questions Could any body help me out on this and Let me know i need to be little elaborate on this ...
1.    What are the basic settings we need to do for Personnel                          Management ?
2.    I want to know how to maintain Organization plans for Different Org Units.
Thank you,
Ayyappa

adding to archana response
Enterprise Structure consists of   Company code
                                                  Personal Area
                                                                                Personal Sub Area
Organisational Structure           Organisationla Units
                                              Jobs
                                              Positions
sikindar

Question reg Forecast funtions in Oracle

Hello Everybody,
Is there a function(s) in Oracle that's equivalent of FORECAST function in MS Excel ?

This is the forum for Oracle's SQL Developer tool, not for general SQL and PL/SQL questions.
Questions like this will get a better response in the PL/SQL forum.

Question reg. sapscript. please help

I am modifying a standard medruck sapscript form for the customer needs. Now on the printout, if i want the text under 'item_text' text element to come after the text under'ITEM_SCHEDULE' text element, where should I change the code? in main program ? or in form itself? Please give me an idea reg. this.
/E           ITEM_TEXT
IC           ,,&TTXIT-TDTEXT&
/:           INCLUDE &T166P-TXNAM& OBJECT &T166P-TDOBJECT& ID &T166P-TDID& LANGUAGE &
/E           ITEM_SCHEDULE
IM           ,,,,,,&RM06P-PRMG1&,,&T006A-MSEHT&,,&RM06P-PRITX& &RM06P-LFDAT&,,,,
=           &RM06P-PHTXT(27)&
Thanks a lot,
Krishen

Yes it will, and yes you will have to copy a couple of things, first you will need to copy the driver, program SAPFM06P into custom program SAPFZM06P. Then copy function group MEDRUCK into ZMEDRUCK with all the function modules, then go to the SAPFZM06P program and copy the include program FM06PE02 into ZFM06PE02 and include this in the main program SAPFZM06P, inside the ZFM06PE02, change the call in the ENTRY_NEU form to call the "Z" version of your function module in the ZMEDRUCK function group.
form entry_neu using ent_retco ent_screen.
data: l_druvo like t166k-druvo,
        l_nast like nast,
        l_from_memory,
        l_doc   type meein_purchase_doc_print.
clear ent_retco.
if nast-aende eq space.
    l_druvo = '1'.
else.
    l_druvo = '2'.
endif.
call function 'ME_READ_PO_FOR_PRINTING'
       exporting
            ix_nast        = nast
            ix_screen      = ent_screen
       importing
            ex_retco       = ent_retco
            ex_nast        = l_nast
            doc            = l_doc
       changing
            cx_druvo       = l_druvo
            cx_from_memory = l_from_memory.
check ent_retco eq 0.
<b>call function 'ZME_PRINT_PO'</b>
       exporting
            ix_nast        = l_nast
            ix_druvo       = l_druvo
            doc            = l_doc
            ix_screen      = ent_screen
            ix_from_memory = l_from_memory
            ix_toa_dara    = toa_dara
            ix_arc_params = arc_params
            ix_fonam       = tnapr-fonam          "HW 214570
       importing
            ex_retco       = ent_retco.
endform.
You must then change your configuration for the purchase order to tell the system to use the "Z" versions of the print program SAPFZM06P
Regards,
Rich Heilman

Reg To MOF question

Similar Messages

Maybe you are looking for