Reg user exits exit_saplogdl_005 and exit_saplogsl_007 for va01 tcode

Hi All,
I have a requirement to add new fields to additional dataB fields for the transactions va01,va02 and all that we can do with screens 4462 of main screen 8459 and we can write the code in the user exit userexit_move_field_to_vbap in program MV45AFZZ. But in our requirement they also mentioned we have to write the code in the fun mod exits "exit_saplogdl_005" and "exit_saplogsl_007"
These exits I am able to find only in my version ECC6.O not in 4.7 and all and also I don't find any parameters for this function module exits. Can any body throw some idea how I can use of this fun mod exits.
Thanks&Regards
Mahesh

Similar Messages

User-exit CO11N and CO13 (for GM)

Hello to all!
I need a user-exit (or something like this) in transaction CO11N and CO13 where also the goods movements are available. In all the u201Cnormalu201D User-Exits while confirmation (CONFPP01 until CONFPP07) I have only tables like AFKO, AFPO, AFVC, AFRU u2026 in access but I need the GOODSMOVEMENTS for a further processing step for the movement with movement type 101.
Thanks in advance,
Regards

Did you ever tried searching in SAP enhancements for your req
try these.... Find yourself
CONF0001 Enhancements in order confirmation
CONFPI01 Process order conf.: Calculate cust.specific default values
CONFPI02 Process order confirmation: Customer spec. input checks 1
CONFPI03 Process order conf.: Cust. spec. check after op. selection
CONFPI04 Process order conf.: Customer specific input checks 2
CONFPI05 Process order conf.: Cust. spec. enhancements when saving
CONFPI06 Process order confirmation: Actual data transfer
CONFPM01 PM/SM order conf.: Determine cust. specific default values
CONFPM02 PM/SM order confirmation: Customer specific input checks 1
CONFPM03 PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04 PM/SM order conf.: Customer specific input check 2
CONFPM05 PM/SM order conf.: Cust. specific enhancements when saving
CONFPP01 PP order conf.: Determine customer specific default values
CONFPP02 PP order conf.: Customer specific input checks 1
CONFPP03 PP order conf.: Cust. specific check after op. selection
CONFPP04 PP order conf.: Customer specific input checks 2
CONFPP05 PP order conf.: Customer specific enhancements when saving
CONFPP06 PP Order Confirmations: Actual Data Transfer
CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscreens
CONFPS01 PS confirmation: Determine customer specific default values
CONFPS02 PS confirmation: Customer specific input checks 1
CONFPS03 PS confirmation: Customer specific check after op. selection
CONFPS04 PS confirmation: Customer specific input checks 2
CONFPS05 PS confirmation: Customer specific enhancements when saving

User exit at item level for billing block field default for VA41 or VA42

Hi All,
I want user exit at item level for contract (VA41or VA42) for the field Billing Block in the Billing document tab
which has to populate with some default value.
Which user exit i need to check.
Regards
Jai

Hi,
Use subroutine USEREXIT_FIELD_MODIFICATION in Include MV45AFZZ.
Make sure this is for only tcodes VA41 and VA42 because this wil trigger for sales order also.
Regards,
Ashok.

User exit EXIT_SAPLL03T_002 and jobs

Hi everybody,
I have a problem with user exit EXIT_SAPLL03T_002 and trx LT12, i put code (the code is in the end) in the user exit in order to update the field QNAME from the standar table LTAP, the sentences for the update are in a job.
The problem is when a run the LT12, put the order and press enter the trx finish normally, but when i see the jobs resumen (SM37) there isnt any job.
Thank you for your help, see you.
INCLUDE ZXLTOU02 *
DATA:
 WJ_JTANUM LIKE LTAP-TANUM,
 WJ_LGNUM LIKE LTAP-LGNUM,
 WJ_WERKS LIKE LTAP-WERKS,
 WJ_USER LIKE SY-UNAME,
Parametros para el Job
 l_numero LIKE tbtcjob-jobcount, "ID de un job de fondo
 l_fecha LIKE tbtcjob-laststrtdt, "Fecha de ejecución más tardía
 l_hora LIKE tbtcjob-laststrttm, "Ultima hora de ejecución para
 l_jobname LIKE tbtco-jobname VALUE 'JOB_RF',
 W_USER LIKE SY-UNAME,
 W_HORA LIKE SY-UZEIT,
 W_DIA LIKE SY-DATUM.
GET PARAMETER ID 'mb_usuario' FIELD W_USER.
Solo lo realiza para la transaccion LM05 y LM07
y si es por logueo No SAP
***ANTIGUO
*IF ( SY-TCODE EQ 'LM05' OR
SY-TCODE EQ 'LM07' OR SY-TCODE EQ 'LM03' OR
SY-TCODE EQ 'LM04') AND ( W_USER NE '' ).
**********ACTUALIZADO 07/02*********
IF ( SY-TCODE EQ 'LM05' OR
 SY-TCODE EQ 'LM07' OR SY-TCODE EQ 'LM03' OR
 SY-TCODE EQ 'LM04' OR SY-TCODE EQ 'LT12' ) AND ( W_USER NE '' ).
ojo
UPDATE ZTMB_USERCOLA
 SET STATU = ' ' DOCNUM = ' '
 WHERE
 BNAME = W_USER.
GET PARAMETER ID 'mb_hora' FIELD W_HORA.
GET PARAMETER ID 'mb_dia' FIELD W_DIA.
CALL FUNCTION 'JOB_OPEN'
 EXPORTING
 jobname = l_jobname
 IMPORTING
 jobcount = l_numero
 EXCEPTIONS
 cant_create_job = 1
 invalid_job_data = 2
 jobname_missing = 3
 OTHERS = 4.
 SUBMIT ZUPDATE_LTAP
 AND RETURN
 VIA JOB l_jobname NUMBER l_numero
 WITH WJ_TANUM = T_LTAP_VB-TANUM
 WITH WJ_LGNUM = T_LTAP_VB-LGNUM
 WITH WJ_WERKS = T_LTAP_VB-WERKS
 WITH WJ_USER = W_USER.
Llama a la funcion para cerrar el Job
 CALL FUNCTION 'JOB_CLOSE'
 EXPORTING
 jobcount = l_numero
 jobname = l_jobname
 strtimmed = 'X' "Inicio inmediato
 EXCEPTIONS
 cant_start_immediate = 1
 invalid_startdate = 2
 jobname_missing = 3
 job_close_failed = 4
 job_nosteps = 5
 job_notex = 6
 lock_failed = 7
 OTHERS = 8.
ENDIF.
REPORT ZUPDATE_LTAP .
PARAMETERS:
 WJ_TANUM LIKE LTAP-TANUM, " Numero de OT
 WJ_LGNUM LIKE LTAP-LGNUM, " Almacen
 WJ_WERKS LIKE LTAP-WERKS, " Centro
 WJ_USER LIKE SY-UNAME, " Usuario SAP
 W_QNAME LIKE LTAP-QNAME.
data: w_actual, w_timeout type i.
Actualiza el campos de usuario
w_actual = '0'.
w_timeout = 0.
while w_actual = '0' and w_timeout < 300.
w_timeout = w_timeout + 1.
WAIT UP TO 7 SECONDS.
UPDATE LTAP
 SET QNAME = WJ_USER ZZRF_BNAME = WJ_USER
WHERE
 TANUM = WJ_TANUM
 AND
 LGNUM = WJ_LGNUM
 AND
 WERKS = WJ_WERKS.
AGREGANDO 4 ENERO
UPDATE ZTMB_USERCOLA
 SET TPICKEO = SY-UZEIT FPICKEO = SY-DATUM
WHERE
 LGNUM = WJ_LGNUM
 AND
 BNAME = WJ_USER.
AGREGANDO 4 ENERO
if sy-subrc = 0.
 w_actual = '1'.
 UPDATE LTAK SET ZZRF_BNAME = WJ_USER
 WHERE TANUM = WJ_TANUM AND
 LGNUM = WJ_LGNUM.
endif.
commit work.
endwhile.

Hi,
Check the print parameters. Probably after execution you may be deleting the job.
You can change the print parameters during runtime.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
 EXPORTING
 no_dialog = 'X'
 user = sy-uname
 IMPORTING
OUT_ARCHIVE_PARAMETERS =
 out_parameters = params
 valid = ws_valid.
IF ws_valid <> space.
 params-pdest = 'LOCL'. "Destination
 params-primm = ''. "Print Immediately
 params-prnew = 'X'. "New Spool Request.
 params-armod = '1'. "Print: Archiving Mode - Print Only
 params-linct = 65. "Rows
 params-linsz = 255. "Cols
 params-paart = 'X_65_255'.
 params-prrec = sy-uname. "User name
 params-prsap = ''. "Print: SAP Cover Page
 params-prunx = ''. "PRINT: Host spool cover page
 params-prcop = '001'. "number of copies
 SUBMIT zmib_fiber_link_background
 WITH file = i_file_list-name
 WITH rb1 = space
 WITH rb2 = c_x
 WITH p_launch = c_x
VIA JOB ws_c_session NUMBER ws_c_jobnum
EXPORTING LIST TO MEMORY
 TO SAP-SPOOL
 WITHOUT SPOOL DYNPRO
 SPOOL PARAMETERS params
 AND RETURN.
endif.
CALL FUNCTION 'JOB_CLOSE'
 EXPORTING
 jobcount = ws_c_jobnum
 jobname = ws_c_session
 strtimmed = 'X'
 EXCEPTIONS
 cant_start_immediate = 1
 invalid_startdate = 2
 jobname_missing = 3
 job_close_failed = 4
 job_nosteps = 5
 job_notex = 6
 lock_failed = 7
 OTHERS = 8.
Also check the sy-subrc after JOB_OPEN.
Regards
Subramanian

Please send material or good lionk on USER-EXIT,BADI and ENHANCEMENT

Hi All,
Please send some step by step material or good lionk on USER-EXIT,BADI and ENHANCEMENT which will be usefull for beginners like me.
Thanks in advance
Srikanta

Hi Srikanta,
Please see the SDN page for ABAP Enhancements and Modifications:
https://www.sdn.sap.com/irj/sdn/abap?rid=/webcontent/uuid/109f5161-ee76-2910-cb99-db10b559ef4b [original link is broken]
Cheers,
Ville

BAPI,BADI ,BDC,ALE ,IDOC,USER EXIT,VALIDATION AND SMART FORMS.

Dear Experts,
I am pretty new in BAPI,BADI ,BDC,ALE ,IDOC,USER EXIT,VALIDATION AND SMART FORMS.
Pls let me know for these topics shall i put the question in this community or should i put in any other form. Pl suggest me .
Regards
Shivas

Plz SEARCH in SCN before posting ,you will get lot of posts .
Don't use all caps in the subject line

User exit or a badi for checking the vendor email id in me22n on me29n

hi all,
can anybody suggest me a user exit or a badi for checking the email id of the vendor in me21n or me22n or me29n.
i.e. a user exit or a BADI which gets hit either at the time of creation or release of a purchase order.
plz suggest me a solution its urgent.
regards,
santosh

Hi Santosh,
Have you looked BADI ME_PROCESS_PO_CUST or user exits EXIT_SAPMM06E_016 / EXIT_SAPMM06E_017?
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

User-exit on APO side for the deliveries that are coming from R/3

Hi,
When a delivery is created in ECC for a VMI customer, it creates an EI order in APO. We need to record some details of these orders on the APO side. Can you please let me know the user exit/BADI that gets triggered when a delivery comes to APO through CIF which we can use for our requirement?
Thanks in advance.

Hi,
You can use APOCF006(EXIT_/SAPAPO/SAPLCIF_PU_001) CIF User exit on APO side for CF_OBJECTTYPE = B(Delivery).
I hope this will help you.
Regards,
Saurabh

USER-EXIT on SAVE event for IE01

Hi,
I need USER-EXIT on SAVE event for t-code IE01.
EXIT IEQM0003 work only first time after pressing "SAVE".
IF i press "SAVE" second time equipment will be created.
Edited by: andriy.hulyk on Jan 26, 2012 12:45 PM

Here is my code:
IF DATA_ILOA-TPLNR IS INITIAL.
AUTHORITY-CHECK OBJECT 'ZZ_MC_FLC'
ID 'ZZFLC' FIELD '*'.
CASE SY-SUBRC.
    WHEN 0."SAP-ALL User
      EXIT."OK
    WHEN 12."User without restriction
      EXIT."OK
    WHEN OTHERS.
      AUTHORITY-CHECK OBJECT 'ZZ_MC_FLC'
      ID 'ZZFLC' FIELD '01'.
        CASE SY-SUBRC.
          WHEN 0."Create eq. only with FL for some work centers
            MESSAGE E250(ZPM) WITH 'test' RAISING POSTING_NOT_ALLOWED_EXT.
        ENDCASE.
    ENDCASE.
ENDIF.
If i press "SAVE" firs time it work great. But next pressing just create new equipment. My restriction does not work(

Difference between user exit,enhancement and BAdi

hello guys,
what is the difference between user exit,enhancement and BAdi.
Please do let me know..
Thanks in advance.
regards,
praveen.

Pls do search the forum before posting*

User Exit/BADI name required for changing schedule lines (VA01 and VA02)

Hi all,
Please tell me an exit or badi for modifying VBEP date i.e. VBEP-EDATU which triggers for a change in any of the following fields:
1. VBAK-KUNNR; 2. VBAK-VDATU and 3. VBAP-WERKS
Currently I tried using USEREXIT_MOVE_FIELD_TO_VBEP and FORM USEREXIT_CHECK_VBEP but nothing is giving me the results as desired.
Pls help, points will b awarded for helpful ans.
thanks
Sangharsh

Have a look at below link which gives details related to user exits in VA01/VA02.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers

REG:USER EXIT FOR DATA SOURCE 0HR_LSO_1

Hi ,
I have to write the enhancement ABAP code for data source 0HR_LSO_1 which is related to module " training and event management "(also known as LMS or LSO) in ECC 6.0 .
So how can I find out appropriate user exit for the same .I have to concentrate on the field "kostl (cost centre)" in that data source .
Please provide some suggestions .
Thanking You ,
Tarun Brijwani .

Hi Tarun...
I this might help you.
In the HR System:
1) T-CODE: CMOD
2) Choose an existing project (vg: Z12345)
3) Modify
4) Press Components button
5) Look for the enhance: RSAP0001 (the BW extracting enhancement)
6) The you have one of the following option:
a- If the Data Source is "transaction data": The exit is "EXIT_SAPLRSAP_001"
b- If the Data Source is "master data": The exit is "EXIT_SAPLRSAP_002"
7) double-click in the appropriate one
8) You'll see an INCLUDE sentence. Could be this ZXRSAU01 or this ZXRSAU02 (depending on the previous step). Double-click and you'll be redirected to the SE38
9) some code:
CASE i_datasource
WHEN '0HR_LSO_1'.
    LOOP i_t_data INTO my_struct
       my_struct-KOSTL           "Here you'll must have your Cost Center
       ...etc...etc...etc
    ENDLOOP.
WHEN OTHERS.
ENDCASE
Hope it helps.
gdmon

Reg:User Exit For Invoice

Hi All,
I have an requirement that when during creation of invoice i have to update some data's to ztables and during deletion of invoice i have to update some data's. Is it possible?
Is there any user exit for this scenario? Kindly give your idea's how to resolve this scenario.

hi,
these r the exits updated during invoice creation.
Transaction Code - MIRO                     Enter Invoice
Enhancement/ Business Add-in            Description
Enhancement
LMR1M001                                User exits in Logistics Invoice Verification
LMR1M002                                Account grouping for GR/IR account maintenance
LMR1M003                                Number assignment in Logistics Invoice Verification
LMR1M004                                Logistics Invoice Verification: item text for follow-on docs
LMR1M005                                Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006                                Logistics Invoice Verification: Process XML Invoice
MRMH0001                                Logistics Invoice Verification: ERS procedure
MRMH0002                                Logistics Invoice Verification: EDI inbound
MRMH0003                                Logistics Invoice Verification: Revaluation/RAP
MRMN0001                                Message output and creation: Logistics Invoice Verification
Business Add-in
INVOICE_UPDATE                          Business Add-In: Logistics Invoice Verification

Reg User Exit for Infotype 8

Hi,
I have created two custom fields on infotype 8, i need populate on fied with base salaryBonus(from infotyp 14) and the other field should be the total of all line items on Infotype 8 ( Base salary shift differentials(permiums).
In order to do this, i searching for user exit , can anyone help me in doing this ..please
Thanks
Kisu

Hi,
I looks into the exit.It seems it is doesnt get tigger while going through the PA40.I dont know is it possible or not but I need to do while going through the actions. when the user in pa40 goes through some actions and reaches infotype 8 and enters and the values and press enters ,at this moment I need to find the Exit that gets tiggers and calculates the values and populates the custom fields on 0008.
I would like to know is it possible to do so..?
Thanks
Kisu

Badi or User Exit to send Mail for Tcode IW31 and IW32

Hi All,
I have a requirement as follows:
In IW32, after entering an order number, if we change the user status (activating the user status) and press the SAVE button, a mail needs to be triggered
I have found a couple of user exits but I am unable to find one soon after the table updation. Another important thing to note is that if the user wants to deactivate the user status (i.e., when the user status is reverted back to the previous status) and saved, then this functionality should not be executed.
Kindly help me with the user exit or the enhancment or the BADI where I can implement this functionality.

Hi,
Create a event driven function module, your function module will trigger based on the event. Configure that in the transaction SWETYPV..When ever the status is changed it will trigger a function module (Z function module) which inturn send a mail(IF you write the code)..
Use Business object - -
BUS2007
Use events:
MaintenanceOrder.released                        Order released
MaintenanceOrder.teccompleted                    Order technically completed
MaintenanceOrder.finconfirmed                    Order finally confirmed
MaintenanceOrder.completed                       Business completion for order
Regards,

Reg user exits exit_saplogdl_005 and exit_saplogsl_007 for va01 tcode

Similar Messages

Maybe you are looking for