Regarding ESS Addresses application

Hi,
We are using EP 7.0 and implemented ESS/MSS.
Now they have activated Com01, Num01 fields of Infotype 6(Adresses).
But these fields are not visible in the Addresses application of ESS.
For example if I add these entries in Permanent address type, these fields are not displayed in Portal,
Is there any configuration available in the ECC to make these fields visible in portal ESS application also since these fields are standard or do we need to go for customization.
Any idea on this will be highly appreciated.
Thanks and Regards,
Vivek.

Hi,
In order to add the required fields in the ESS Addresses application, we need to add those fields in the following structure of the country specific function module HRXSS_PER_EDIT_P0006_XX where XX u2013 defines the country code(say de- germany, fr-france)
Structure: HCMT_BSP_PA_XX_R0006 where again XX u2013 defines the country code
After changing the structure you need to restart the portal for this to reflect and use the below mentioned link.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?spaceKey=profile&title=ESSPersonalInformationUIenhancementwithoutmodification&decorator=printable
After that you need to enhance the BADI HRPAD00INFTYUI for the input conversion ans output conversion.
Please let me know for further clarification.
Regards,
Vivek,

Similar Messages

ESS Permanent Address Application

Hi experts,
I need a sample ESS Permanent Address Application.Can anyone send a ESS permanent address application to my mail address.
[email protected] ....
Thanks & Regards
Karthik

Hi,
EDIT: Found this thread in the meantime, might be helpful: /thread/1270887 [original link is broken]
Anyway, if role-based personalization fails and there are even dependencies on the lowest-level UI-elements for some reason plus you have no option to influence the service via SPRO; as far as I know you'd have to go for modification in NWDI/NWDS.
But better wait with that until Siddarth or so commented this to be on the safe side.
regards, Lukas
Edited by: Lukas Weigelt on Apr 15, 2011 1:12 PM
Edited by: Lukas Weigelt on Apr 15, 2011 1:15 PM

ESS: Addresses check on postal code based on country

Hi,
    We have implemented ESS addresses for non standard country by reusing the existing application.
    One of the requirement is to enforce postal code validation based on the selected country (for specific subtypes).
    Is this validation applies by default or we need to do any customizing / enhancement ?
Thanks & Regards,
SuresH.

Usually which country you resuse, those checls are avalable automatically
You can also do so using CL_HRPA_INFOTYPE_0006_XX SPECIFIC_COMPUTATIONS
xx for country you are using
or check here too V_T005_BAS

Error in address application

Hi,
I am working on the ESS 600 and EP7 and ECC6.0.
My address application is working fine means giving all the address correctly.But when i am trying to Edit the following error is there:
The initial exception that caused the request to fail, was:
   java.lang.NoSuchMethodError: com.sap.xss.per.fc.persinfo.wdp.IExternalFcPersInfoInterface.setSelectedRecord(I)V
    at com.sap.xss.hr.per.ca.address.overview.VcPerAddressCAOverview.edit(VcPerAddressCAOverview.java:237)
    at com.sap.xss.hr.per.ca.address.overview.wdp.InternalVcPerAddressCAOverview.edit(InternalVcPerAddressCAOverview.java:257)
    at com.sap.xss.hr.per.ca.address.overview.BizCardsView.onActionEdit(BizCardsView.java:184)
    at com.sap.xss.hr.per.ca.address.overview.wdp.InternalBizCardsView.wdInvokeEventHandler(InternalBizCardsView.java:222)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)

Hi Anumit,
                Check with the Patches this could resolve u r issue.
Regards,
Kumar.

ESS Address change - customizing

Hi ,
Can anyone tell me where to look for the country specific screens for the ESS address change.
Thanks in advance.
Regards,
Bharat

Hi Bharat,
If you are asking about the front end screens, then each country has it own DC,say for example,US addres application has a DC called 'essusaddr', similarly Japan will have a DC 'essjpaddr'.
Hope this helps..
Regards,
Sharadha

How to Set the Visibility of a field in ESS Address view through portal

Hi experts,
I want to set the visibility of a field in ESS Address view through portal.How to edit a field through portal? Please help me with procedures to be followed..
Thanks&Regards,
Karthik.

Hi,
Login to portal with a user having content administration role.
Navigate to your iview which must be under content provide by SAP(if its a standard iview).
Open the iview and click on preview button.
Then press ctr on keyboard and rightmouseclick on the field for which you want to change.
A popup will open. Change the visibility in the popup and save the changes. This is a way of personalization and it'll be applicable for all the users.

Call the ess payslip application using a URL

Hi
i want to
1. call the ess payslip application using a URL
2. and pass PERNR as parameter to this URL so that the salary slip displayed is for that particular PERNR.
i am able to get the payslip application through URL.
Now how to acheive point no. 2 ?
Regards
Rajendra
Edited by: Rajendrakumar Gaikwad on Dec 30, 2008 11:55 AM

Hello
If this is not possible , let me know which BAPI it is calling to create the pdf
so that i will create a application to call the BAPI itself and pass PERNR .
Regards
Rajendra

Customizing ESS~BEN application

Hi All,
Some customization is required in the ess~ben application.
Requirement: The buttons in the ContainerPlanDetailView (of controller VcBenefitsPlanDetail) have to be copied in the PlansOfPlanTypeView (of controller VCBenefitsPlansOfPlanType). The functionality is also to be copied, i.e. the action performed by the buttons in both the view should be the same.
I also want to know how we define navigation between perspective in this application or any ESS application.
Thanks,
Vibha Singhal

Hi Vibha,
First you copy the buttons from layout tab of ContainerPlanDetailView to layout tab of PlansOfPlanTypeView. Create actions with same names as in ContainerPlanDetailView. Now copy the code from methods onActionXXX of ContainerPlanDetailView to that of PlansOfPlanTypeView.
Check this [link|http://help.sap.com/saphelp_erp2005/helpdata/en/43/41840d47041806e10000000a1553f6/content.htm], if it is helpful for navigation between perspectives
Regards,
Siva

ESS: Address Make Telephone required field

Hello ,
I was trying make Telephone Number as required field in ESS - Webdynpro application,
but i could not find the exact place. I was looking at the following DC: ess/per
ess/us/addr, i just found the following code:
fpm.raiseReviewAndSaveEvent(IFPM.EVENT_REVIEW, IFPM.EVENT_SAVE, thisVAC);
I changed the field as required also if the use clicks review then i should display message if the telephone number is not entered.
If anyone have any input on this highly appreciated.
Thanks
VJ

Hi,
You have the detail component for address name VcPerAddressUSDetail.
Mark the layout view of telephone as property STATE=required
Go to component controller and write the following code inside the function onFlush.
You can see the line wdThis.wdGetFcPerAddressUSInterface().modifyRecord(); below of this function.
public void onFlush( )
String TelNumber=wdContext.currentSelectedInfotypeElement().getTelnr();
if (TelNumber== null || TelNumber.equals("")){
wdComponentAPI.getMessageManager().reportException("Please enter the telephone number");
else
wdThis.wdGetFcPerAddressUSInterface().modifyRecord();
Hope this will resolve your problem
Thanks
Kanai

ESS Address - Postcode

Hi All,
We have a requirement coming in from the client to default the fields in ESS -Address (for UK/GB), based on the user input post code using the available post code mailing list.
Do we need to go in for an entirely new custom development or this could be achieved by any other way.
Any suggestions are welcome.
Thanks,
Harshal.

Sorry, default the field would mean default the field values based on the Post Code selected.
This is similiar to may web based applications (in UK that I have seen example :Council Tax payments wherein one can mention the Post Code and is presented with the house numbers available at that postcode)
The question is, can this be achieved by configuration (somewhere) or there is a dire need of a custom implementation.
Not sure if someone has implemented the same using Royal Mail Mailing List.

Enhancing ESS MSS Applications

Dear Guru's,
I am an ABAP Consultant with experience in WDA.
But, i don't have experience in HCM module and ESS/MSS sub-modules.
I am looking for some good step by step blogs/links on ESS/MSS application enhancements.
It will be helpful, if someone can please provide such collection of links.
Thanks and Regards.

Hi,
You can look into the below blog's, may be helpful to you
HCM EHP5, EHP6 and HR Renewal,Fiori Important links and documents
Exciting Enhacements to ESS Personal Information Profile in Enhancement pack 6
Regards,
Mohsin.

ESS Address Required Field Web Dynpro

Hi,
Trying to make a field on the ESS Address screen mandatory. Viewed the Web Dynpro Java Code and updated the label to required - which put the * next to the label on the screen, however I cannot see where the validation check exists.
Do I have to validate the code in web dynpro and if so where or is it a ABAP issue?
Have read in other postings (e.g. Re: ESS Web dynpro for portugal) that the required fields can be updating in the table V_T588MFPROPC. I'm unsure if this is correct as a required field 'City' does not exist in this table, which is a mandatory field. Also what values should I enter and how is the error message format created?
Thanks
Brian

Hi,
Setting the attribute of field as required will only add a * mark in front of it.
If you want to make it mandatory in WebDynpro code then please go through the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/wd%20java/wd%20tutorials/a%20simple%20input%20form%20with%20message%20and%20error%20service%20support.pdf">following link</a>.
As said by you many of the HR screens field attributes can be configured in SPRO.
SPRO - Personal management - Personal Administration - Customizing UI - Change Screen Modifications.
Hope this helps you.
We can do that setting in backend then thats fine else you can do that in WebDynpro.
Regards,
Nagaraju Donikena.
Regards,
Nagaraju Donikena

ESS Address Book - Need "Valid as of Future Date" instead of "Valid From"

Hi,
We have implemented ESS (WebDynpro based) with MySAP ERP 2005. We have two independent Portals. On one of the Portals, in ESS address book iview the field comes as "Valid as of Future Date" and this does not allow and past date to enter. Whereas in the second portal the same field is visible as "Valid From". I have checked the settings in IMG and checked the time constraint, everything seems same.
Please help me how can I configure the date in second portal to be "Valid as of Future Date". Is there any configuration that needs to be done in backend/front to do this??
Please help!!!
Regards,
Ravi

Hi Ravi,
May be you can check the ESS Setting for Address Book.
in the IMG Path
Personnel Management -->Employee Self Service --> Service Specific -->Address Book --> Who's Who --> Selection and Output.
May be in this path , you can for the Country Code, what are the Selection fields set.
Hope this helps.
Regards,
Raj

Is there screen control at the Subtype level for ESS Address in ECC 6.0?

Hello Developers,
The Dynpro view for adding/maintaining ESS Address information requires certain fields to be entered regardless of the type of Subtype (ex. Permanent Address or Work Address).
It's ok for our Permanent Address subtype to require certain fields such as City, State, and Postal Code, but we don't want these same fields to be required for our Work Address subtype.
Is there a way to control this for individual subtypes?
Thank you,
Terry

Thank you Shikhil,
This was already tried and didn't work.
Running a debug session, I can determine that the message is coming from the back-end SAP system. I can also see that these fields are flagged as Required on the back-end but due to the complexity of the code I haven't been able to determine what table this is read from.
The IMG view for "Infotypes - country-specific settings" apparently doesn't control this either but I'm hopeful that there is a screen control that will allow me to remove the "Required" setting.
Terry

Need Information Regarding ESS/MSS?

Hi All,
I am Having Doubts Regarding ESS?
In Ess it contains Different Tasks.
->Befenits & Payment
->Career job
->Employee Search
->Personal Information
->Travel management
->Corporate Inf
->Life & Work Events
These Tasks Comes Under one WebdynproIvew or Different WebDynproIvews?
In WebdynproIvews I Have to Write Webdynpro Code for Search,Edit and Submit.For this I Need Webdynpro Code.Plz send me the Code?
Reply ASAP.
Regards
Kiran

Hi Kiran,
There is no need to develop iViews for ESS. ESS comes with all iViews, pages, and roles provided by SAP. All you need to do is assign the ESS role to the end user.
Firstly answer these questions:-
1) Why do you need to develop WebDynpro iViews for ESS?
2) Have you already downloaded ESS Business Package and using it?
3) Have you got the NWDI installed?
4) Have you got NetWeaver Developer Studio installed?
If you can manage to answer these questions clearly, I hope someone might be able to help you?
Assign Points if you find this helpful!!!
Kind Regards,
Gopal.

Regarding ESS Addresses application

Similar Messages

Maybe you are looking for