Regarding f1 and f4 helps

Hi...
good morning..
here is a question.
1.wht is the difference between f1 help and f4 help.
thanks and regards,
k.swaminth reddy.

hiii
Field help (F1) and input help (F4) are standard functions throughout the system. You therefore cannot assign any other function codes to the F1 or F4 keys.
If the user chooses the F1 key or the corresponding help icon (This graphic is explained in the accompanying text), a help text appears for the field in which the cursor is currently positioned.
If the user chooses F4 or the input help button (This graphic is explained in the accompanying text) to the right of a screen field, a list of possible entries appears for the cursor in which the cursor is currently positioned. The user can then choose one or more values, which are then copied into the screen field.
There are various ways of making field and input help available to users. For example, you can either use ABAP Dictionary functions, or program your own help functions.
Another special way to display lists of values is to use a dropdown box.
Regards
Hitesh
<b>'REWARD POINTS IF HELPFUL'</b>

Similar Messages

Need help Regarding Payroll and OM

Hi All,
Can any one of you provide me a configuration documents regarding Payroll and OM ..I need it very badly.Can any of you help me out in this.You can mail to my id
[email protected].
Thanks in advance,
Sandeep

hi friends
can u anybody have Payroll(PCR) DOC , please help me andn send to my mail ID. [email protected]
Thanks in advance
Regards,
Ramesh.n

Question regarding Dashboard and column prompt

My question regarding Dashboard and column prompt:
1) Dashboard prompt usually work with only for columns which are in subject area. In my report I've created some of the columns which are based on other columns. Like I've daysNumber column that is based on two other columns, as it calculates the difference of two dates. When I create dashboard prompt I can't find this column there. I need to make a prompt on this column.
2)For one of the column I've only two values 1 and 0. When I create prompt for this column, is it possible that in drop down list It shows 'Yes' for 1 and 'No' for 0 and still filter the request??

Hi Toony,...
I think there was another way of doing this...
In the dashboard prompt go to Show option > select SQL Results from dropdown.
There you need to write your Logical SQL like...
SELECT CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END FROM SubjectAreaName
Here.. Periods.Year is the column which is already exists in repository's presentation layer..
and difference of date functionality is the code or formula of column which you want to show in drop-down...
Also write the CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END code in fx of that prompt.
I think it helps you in doing this..
Just check and inform me if it works...
Thanks & Regards
Kishore Guggilla
Edited by: Kishore Guggilla on Oct 31, 2008 9:35 AM

Few questions regarding Training and event management

Dear All,
Can you please help me with the following queries regarding Training and Event Management:
1. How to freeze a completed business event so that no changes to its record (like delete/update attendee details or event detail) is possible?
2. How to get feedback from attendee/faculty with a predefined format with rating (1-4 scale)
3. How to maintain department and category wise training man/hrs or training man/days?
Any help will be appreciated.
Regards,
Toa

Hi Toa,
1. Run report RHHISTO0 via SA38. Once the business event is flagged as "historical" no further changes can be done.
3. SM30 - T77S0 - Make the following swtiches active:
SEMIN AINST
SEMIN APART
Then when events are followed up, these training data is recorded to employee 2002 infotype. You can report on it via PT90 (for department-based selection use "Further selections")
Regards,
Dilek

PE 9 and 10 Help PDF Invalid List View Descriptions

Bottom line: Has anyone reported on these problems, and, if so, what is being done about them?
Until proven otherwise, I believe that Premiere Elements 9 and 10 Help PDF requires editing of its List View Descriptions which are appropriate for at least version 8.0/8.0.1, 7, and 4, but not versions 9.0/9.0.1 and 10. Please refer to the Help PDF Projects/View Clip Properties
for version 10:
http://help.adobe.com/en_US/premiere...B-312BB3F13B11
for version 9:
http://help.adobe.com/en_US/Premiere...355c-7f98.html
Problems in this regard for Premiere Elements later than version 8.0/8.0.1 and not for versions 8.0/8.0.1, 7, and 4:
1. List View Properties display in text for export video file, no Data Rate Analysis graphs
2. List View Columns, no ADD to add your own columns, so only Adobe built in ones, and none of the Adobe built in ones, like Client, allow for editable text.
Comments:
Data Rate Analysis
I had read somewhere that these graphs appear for tape based rather than non tape based imports. Mini test: Premiere Elements MPEG4.avi import and DV AVI export of the MPEG4.avi. Results: Version 8.0/8.0.1 Properties for import in text format (file properties) only and Properties for export in text format (file + export properties) as well as display of Data Rate Analysis graph. Versions 9 and 10 Properties for import (file properties) and for export (file + export properties), both import and export text only.
List View Columns
1. If I look at the project.prel WordPad documents and the Client Column information there in each, I do not see any difference.
2. If I create a Premiere Elements 8.0/8.0.1 project, set List View column choices Comments and Client, type in the comments and client information, and save/close/and re-open the project in:
a. Premiere Elements 9.0/9.0.1, the Comments columns and its information will not appear; the Client column will appear, but its information will not be editable. (The 9.0/9.0.1 version does have Client, but not Comments, as a built in choice under Edit Columns)....the latter might explain why no Comments column except...
b. Premiere Elements 10, neither the Comments nor Client columns and their information will appear. (The 10 version does have Client, but not Comments, as a built in choice under Edit Columns.)
One of the Potential Problems:
It is well accepted that, if you edit a project from an earlier version in a later version, you cannot go back to the earlier version for editing. So, one potential problem that I see in all this is the loss of this type of information on upgrading from 8.0/8.0.1 and earlier....
a. If you create a Premiere Elements 8.0/8.0.1 or earlier project which includes Comments and Client information in these List View Column choices, you will lose all that information in version 10 and have only non-editable Client information in version 9.
And, yes we have filed an Adobe Feature Request/Bug Form on this one.
Any comments about what I may have overlooked in trying to get those Help PDF List View Descriptions to work for me would be appreciated.
Thanks.
ATR

I definitely agree that the Help files could use some updating, Tony.

Date selection and search help component in jsp

Hi all:
    In sap portal jsp development enviorment, is it possible to easily program the date selection and search help ( just look like search help in webdynpro ) ?

Hello Jianhong,
the easiest way to set a value help is using HTMLB component in your JSP.
To do it, use next code:
<hbj:inputField
           id="DateInputField"
           type="date"
           showHelp="TRUE"
           ... other attributes
/>
Before using HTMLB components in your JSP, don't forget to add this line to your page:
<%@ taglib uri= "tagLib" prefix="hbj" %>
regards.
mz

Match code and search help

What is the difference between match code and search helps ?

Hi,
search help:
adding f4 functionality is search help(adding help for any topic)
http://help.sap.com/saphelp_erp2005/helpdata/en/3d/e53642e2a3ab04e10000000a1550b0/content.htm
match code:
adding search help for the input field is called as mathcode object
http://help.sap.com/saphelp_40b/helpdata/en/cf/21ef1f446011d189700000e8322d00/content.htm
Regards,
Sravanthi

What is the "Live" page and need help in data merge

Hello,
Im very new to indesign so bare with me. Im trying to data merge (Need to create a merge template?) and from what I understand is that I need it to be on the "Live" page. Someone on the forum suggested this.....
There are two ways to set up the merge template. You can put your placholders on the master page or on the live page. If the placehlders are on the master page, only the frame(s) with the placeholders, along with any other grouped objects, will be duplicated. On the live page, ID will try to duplictate EVERYTHING on the page, so you must be very careful about the setup and sizing of objects.
I would like to be on the LIVE page...how do I do this? I got everything else sorted but cannot get multiple records for the life of me to come up.
Thanks in adavance for your help

Thanks for all your help, Peter. I will do the step and repeat method like you said. I dont know why I cant get this camera for the images to work but I did what you said with Word paint after capturing the page using the keyboard. Unfortunately I cant copy and paste the indesign screen to this page.
Thanks again for your patience and good help.
With kind Regards,
John
P.S Im sure you will see more questions as I make my way through indesign. LOL

Web dynpro documents regarding dynpro and Portal

Hi,
I am new in web dynpro so i need some documents regarding dynpro and portal. So please provide it and if possible send it my personal mail [email protected]
I am also looking for some examples applications .If any budy have links of it provide it.
Regards,
gurprit

Hi Gurprit,
I have sent Complete Webdynpro Examples to your mail.
And also please check the following links for more clear understanding
Programming UI and Navigation
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9214b1e5-0601-0010-fdb0-ec32d43b06e0
Webdynpro for Java
http://help.sap.com/saphelp_nw2004s/helpdata/en/15/0d4f21c17c8044af4868130e9fea07/frameset.htm
Webdynpro Samples
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/web%20dynpro%20sample%20applications%20and%20tutorials.htm
Web Dynpro User Interface
https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/webcontent/uuid/ce44a14c-0a01-0010-af89-d7dbd944f176 [original link is broken]
PDf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/library/nw/netweaverdevelopersguide2004s/sap%20netweaver%20developer's%20Guide%202004s/UsingJava_00_PDFsList.ca
SAP Netweaver Application Server eLearning Catalog
https://www.sdn.sap.com/irj/sdn/elearn?rid=/webcontent/uuid/b1203f5e-0501-0010-bb88-915402c954f2 [original link is broken]
give rewards if useful.
regards
Anil

Dropdown and Value Help in Adobe Form (WebDynpro Java)

Hi Experts,
I need to develop a Adobe form where i have to implement Dropdown and Value Help, which will coming from custom BAPI. I am using WebDynpro Java, EP 7.0 and ALD 8.0. Please let me know how can i implement those 2 UI Elemnts..
Regards
Subhrajyoti

Hi Jyothi,
Herewith I had Explained detailed Procedure,
For Dropdown,
1.     Create a node and attribute to the dropdown ,
2.     call the bapi,
3.     Assign the Bapi attribute to the Dropdown node attribute
4.     Place the Interactive form UI to the Java Application
5.     Create an another attribute for read the interactive form
              a.Name: pdf_src
              b.Type :byte, Assign this attribute to PDF Source property of the Interactive form UI Element.
6.     Give the Name to the Template source property of the Interactive form UI and double click the        template source.
7.     It asking Name for the Interactive form, Give the name for that
8.     Once give the Name, It ask context for Adobe form, assign the already created node for dropdown in Webdynpro application to the interactive form.
9.     Now Context Bounded with Webdynpro and Interactive form
10.     Interactive form screen will be open into the studio
11.     Place the Dropdown UI element to the Interactive form and bind the attribute to the dropdown
12.     Select the Dropdown UI Element, go to the object property, Click the Specify Item values. The pop window displayed, here give the $ value to the Item Text, Item value. The Data Connection dropdown and Default Binding , it has value when the attribute bounded to the dropdown UI .
13.     Save and Test the Application
For Value Help,
1.     Do the Same Procedure for up to 10 steps,
2.     Place the Text field UI and Value Help UI Element
3.     Select the Value Help, go the Script Editor give the name of the text field attribute name in var fieldName = "*INSERT_NAME_HERE*";
4.     Save and Test the Application
By
Parthi

Adsl and vlan help

hello, im new to ccna .
please any expert help me in this sinario,
router 1721 with one wic-1adsl ,i have adsl conection with irb static ip.
the router connect with mannaged switch through a trunk port.
the switch has 2 vlans one for the static IPs and the other for private lan.
i need the private lan to be able to go to internet please any ideas.
the router configuration is as follows:
Building configuration...
Current configuration : 1272 bytes
! Last configuration change at 16:50:18 pc Fri May 10 2013 by admin
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname BELCO
boot system tftp c1700-k9o3sy7-mz.122-15.T17.bin 62.x.x.7x
logging queue-limit 100
username admin privilege 15 password 0 HES2010
clock timezone pc 0
ip subnet-zero
ip cef
bridge irb
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 0/35
encapsulation aal5snap
dsl operating-mode auto
bridge-group 1
interface ATM1
no ip address
shutdown
no atm ilmi-keepalive
dsl operating-mode auto
interface FastEthernet0
no ip address
speed auto
interface FastEthernet0.1
description LAN
encapsulation dot1Q 1 native
ip address 192.168.1.10 255.255.255.0
interface FastEthernet0.2
description WAN
encapsulation dot1Q 2
ip address 62.x.x.7x 255.255.255.248
interface BVI1
mac-address 0000.0cc9.fa98
ip address 10.186.10.106 255.255.255.252
ip classless
ip route 0.0.0.0 0.0.0.0 BVI1
ip http server
ip http authentication local
bridge 1 protocol ieee
bridge 1 route ip
line con 0
speed 115200
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet
no scheduler allocate
end
so vlan2 can go to internet because it has the same subnet with provider but vlan 1 canot go internet.
so how i can make all vlans go internet(the router has only 1 fastethernet port)
thanks in advanced for any help.

OK, so you need to take IP from your public range and assign it to loopback interface.
OR you can use on both subinterfaces private addresses and entire public range use for PAT, statc NAT or what ever, it depends on your reqiurements. How many devices do you have on 62.135.115.72/29 subnet?
If I were you, I would choose second option because in first option you have to lower subnet mask on Fa0.2 from / 29 to /30 which leaves you with only 1 host on this LAN segment!!!
This configuration will ensure that subnet 192.168.1.0/24 will access internet with public IP 62.135.115.72 and subnet 192.168.2.0/24 will access internet with public IP 62.135.115.73.
And you still have 6 more free public IPs for what ever you will need them (static NAT, static portforward. VPN,....)
interface Loopback 72
ip add 62.135.115.72 255.255.255.255
ip nat outside
interface Loopback 73
ip add 62.135.115.73 255.255.255.255
ip nat outside
interface Loopback 74
ip add 62.135.115.74 255.255.255.255
ip nat outside
interface Loopback 75
ip add 62.135.115.75 255.255.255.255
ip nat outside
interface Loopback 76
ip add 62.135.115.76 255.255.255.255
ip nat outside
interface Loopback 77
ip add 62.135.115.77 255.255.255.255
ip nat outside
interface Loopback 78
ip add 62.135.115.78 255.255.255.255
ip nat outside
interface Loopback 79
ip add 62.135.115.79 255.255.255.255
ip nat outside
interface FastEthernet0.1
description LAN
encapsulation dot1Q 1 native
ip nat inside
ip address 192.168.1.10 255.255.255.0
interface FastEthernet0.2
description WAN
encapsulation dot1Q 2
ip nat inside
ip address 192.168.2.10 255.255.255.0
ip access-list extend NAT_ACL_1
deny ip 192.168.1.0 0.0.0.255 192.168.1.0 0.0.0.255
permit ip 192.168.1.0 0.0.0.255 any
deny ip any any
ip access-list extend NAT_ACL_2
deny ip 192.168.2.0 0.0.0.255 192.168.2.0 0.0.0.255
permit ip 192.168.2.0 0.0.0.255 any
deny ip any any
route-map NAT_MAP_1
match ip address NAT_ACL_1
route-map NAT_MAP_2
match ip address NAT_ACL_2
ip nat inside source route-map NAT_MAP_1 interface Loopback72 overload
ip nat inside source route-map NAT_MAP_2 interface Loopback73 overload
Best Regards
Please rate all helpful posts and close solved questions

Steps and documentation help in SAP implementation

Hi Experts,
I need some documents and documentation help.i have never worked in SAP implementation projects.
So,any body knows the steps and documentation when implementing SAP.
please,tell me details and example documents with steps.and tell me the difference between support and implementation.What we will do extrain implementation.
As a ABAP programmer what can i fill in se38 documentation.
Please tell me.
It'll be very helpful to me.
Thanks in advance.
Regards,
Nandha

Any SAP R/3 implementation is a big effort which is done by a team of experts from different backgrounds, not by an individual. So if you are going to be on a project as technical person, in all probability you will join the team as a member of the technical team during the implementation phase. By this time, the blueprint and design phases would have been almost complete and some standards and procedures with regards to documentation, coding, transports and migration accross systems will have been established.
A team lead will brief you all the requirements of the project as far as documentation standards are concerned and migration of the objects, testing procedures etc. You don't have to worry about that. This will be specific to the project, so you cannot generalize it and apply it to every project.
Now the difference between a new implementation and support is that the first one is new one which goes through the phases of blueprinting, design, implementation, testing and go-live. The support phase comes after go-live. You will just be supporting the production system, in that you will be fixing any bugs in the existing programs or change some existing programs to add some more logic or remove some logic, or write new reports or programs as per the users' request.
Srinivas

I have a 3g iphone I can not open it to locked and can help me thanks, I have a 3g iphone I can not open it to locked and can help me thanks

I have a 3g iphone I can not open it to locked and can help me thanks

I presume you mean that you have a passcode to the screen lock that you've forgotten. If that is correct, you will need to restore the iPhone from the computer to which the iPhone is synced. For information and instructions, see:
http://support.apple.com/kb/ht1212
If that will not work, you'll need to put the iPhone into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
If that still doesn't work, as a last resort try DFU mode:
http://www.iclarified.com/entry/index.php?enid=1034
If you're not referring to the screen lock, please post back and clarify.
Regards.

Is there someone at Verizon that still cares about their customers and will help make this right??

I have spent hours on two phone calls and a chat session regarding a billing discrepancy that is THE FAULT OF VERIZON and still no final resolution. My bill is due in 3 days and I want this resolved now because I don't want to not pay a bill on time because it won't be corrected in time and then my credit rating will fall due to THE FAULT OF VERIZON. I have been working on this problem for OVER TWO WEEKS and TWICE have been told that it was all set and that billing was being told to credit my account, yet STILL NO CREDIT HAS HAPPENED. One rep gave me his email address so that I could follow up with him in case something went wrong with the credit. I have emailed him and GUESS WHAT? NO RESPONSE. I have been a loyal Verizon customer for over 15 years with all bills always PAID ON TIME and THIS IS HOW I GET TREATED?? NOT FAIR. This is so unlike me to write something like this in a forum, but I have had it after receiving THE WORST CUSTOMER SERVICE EVER. WHAT AM I SUPPOSED TO DO NOW TO GET HELP? Is no one at Verizon support HELD ACCOUNTABLE FOR VERIZON MISTAKES?? A VERIZON representative listened to what I needed for business travel and they gave me the added feature that they assured me would be what I needed, and apparently it wasn't right. Is it my fault that a Verizon representative does not know the right answers to how their features work and now I am expected to pay OVER $300 EXTRA BECAUSE OF THEIR MISTAKE? When I take the advice of a Verizon rep I expect they know what they are talking about and that the advice is accurate. APPARENTLY THIS ISN'T TRUE.
Is there someone at Verizon that still cares about their customers and will help make this right??

After ANOTHER call I may be on track to resolving this. But WHY did it have to take several calls and chats over a two week period? WHY did I have to become a mean person to the representative on the phone to finally get this (partially) straightened out? Why does it need to come to that? I really don't want to have to get mean and get myself worked up just to get a billing problem straightened out that is VERIZON'S fault.
Verizon, please consider looking into your lack of proper customer support and make corrections. Even though this may be resolved, After 15 years of being a Verizon customer I will be considering another carrier when my contract runs out and all due to this horrible customer service experience.

Encore 5.5 Check Project Issues and Adobe Help

Ok, so I am fairly new to Encore and my years of experience with DVD Studio Pro gibve me some insight into DVD design and Menu construction. However, trying to follow the logic in the Encore workflow is very frustrating. For example, I run the Check Project Panel to see where problems in my DVD authoring and construction have hit a snag. The problem is the Check Project Panel, although it opens a Properties Panel that Panel does not show a specific location of the issue. For Example:
Check Project shows:
Button Menu Item 1 (Problem) Link Not Set
In The PROPERTIES Panel it lists
NAME: Menu Item 1
Number: 12
Type: Normal
Link: Not Set
How, from this information, can I locate the button in question. I If in the CHECK PROJECT panel it indicated the location of the button, which menu, then OK I can locate it. Or, if in the Properties Panel the Button Location as to which menu is in question then OK I can locate it. But there is no Menu description. Instead you have to go through each Menu to locate the item. When working on a production deadline, such issues waste time. In DVD Studio Pro these issues did not occur. Although Encore allows alot of creativity, DVD Studio Pro, even the last version, is superior to Encore in my opinion. It is no wonder that over 70% of production houses preferred FCP to Adobe. Here's an idea for the Encore engineers, create an automated section where alot of traditional authoring issues are automated (BTW your Library of Menus are pretty bad in my opinion) so that it is easy to import a 35 chapter project and have it automatically set up a 4 or 5 menu page DVD and link all the chapters and Previous and Next buttons as well as the navigation of the buttons. Your current version wastes too much time and the Adobe Help is like being handed the text book and having to read the entire set up theory rather then link to specific issues. All of this for Standard DVDs not Blue Ray.
I have already received an apology from Video2brain.com regarding an incorrectly placed reference in Adobe Help i.e. "We'll be working w/ Adobe Help to get that description changed for that particular video, since it doesn't cover color correction in nesting sequences." In this particular case Adobe Help sent me to a Premiere Pro reference where the video explained the basics of Nested sequences but did not cover the specific issues I had and was seeking a reference for. Such poorly designed reference points added to the lengthy explantions one has to read through for Help, makes Adobe Help almost worthless. By comparison Apple references were very clear and to the point, in most cases. It seems that although Adobe Encore and Premiere have some very nice features, but they don't make up for some very big holes in this product.
Again this is my intial impression of Encore and Adobe Help from a former FCP/DVD Studio Pro user.

I have not used DVD Studio Pro, but it has sounded like this is simpler there.
To be sure we are talking about the same Encore workflow, see "chapter index" and "multipage chapter index."
http://help.adobe.com/en_US/encore/cs/using/WS185296FB-D1BB-4d52-ABC4-316DF795FD05.html
http://help.adobe.com/en_US/encore/cs/using/WSf01dbd23413dda0e-3ea68760123ebe30b7c-7fff.ht ml

Regarding f1 and f4 helps

Similar Messages

Maybe you are looking for