Steps and documentation help in SAP implementation

Hi Experts,
I need some documents and documentation help.i have never worked in SAP implementation projects.
So,any body knows the steps and documentation when implementing SAP.
please,tell me details and example documents with steps.and tell me the difference between support and implementation.What we will do extrain implementation.
As a ABAP programmer what can i fill in se38 documentation.
Please tell me.
It'll be very helpful to me.
Thanks in advance.
Regards,
Nandha

Any SAP R/3 implementation is a big effort which is done by a team of experts from different backgrounds, not by an individual. So if you are going to be on a project as technical person, in all probability you will join the team as a member of the technical team during the implementation phase. By this time, the blueprint and design phases would have been almost complete and some standards and procedures with regards to documentation, coding, transports and migration accross systems will have been established.
A team lead will brief you all the requirements of the project as far as documentation standards are concerned and migration of the objects, testing procedures etc. You don't have to worry about that. This will be specific to the project, so you cannot generalize it and apply it to every project.
Now the difference between a new implementation and support is that the first one is new one which goes through the phases of blueprinting, design, implementation, testing and go-live. The support phase comes after go-live. You will just be supporting the production system, in that you will be fixing any bugs in the existing programs or change some existing programs to add some more logic or remove some logic, or write new reports or programs as per the users' request.
Srinivas

Similar Messages

I am new and need help in SAP Securities

Hi,
I am new here and looking for some material for SAP Securities.
Please help.
Thankyou,
Micky

Hi,
I am new here and looking for some material for SAP Securities.
Please help.
Thankyou,
Micky

SAP Implementation on Limited Bandwidth- Satellite Connection

Hi All,
I have an implementation scenario in which client has an overseas office connected by a 1 mbps satellite connection. We are proposing implementation of multiple instances.
I would like to seek information on the performance of SAP GUI/Web GUI on limited bandwidth connection as the bandwidth will get further downgraded to 512 kbps in the future.
Are there any tools available to enhance SAP performance in limited bandwidth environment. Please let me know of any documentation which explains SAP implementations with bandwidth constraints.
Thanks & Regards
Rasheed

hi rasheed,
there are several consideration you might want to consider ?
1. how many users on remote office will connect through that satellite connection ?
2. you can also try low speed connection setting (on SAPGUI). This is useful when you have limited bandwidth.
3. how big is your users (on remote office) will acquire from SAP server ?
maybe another SAP Gurus will add more checlists.
ardhian
http://sapbasis.wordpress.com
http://basishowto.blogspot.com

Steps / activities of SAP implementation

hi experts,
i am very confused and i just want to know that what are the various steps which people use to follow during the implementation of SAP in any organization. i am not at all clear but randomly what i know is like preparing BBP then after QADB development server quality server production and go live etc. but i don't know it in systematic manner.
since i am not at all aware of this things it will be better for me if you explain me the entire implementation life cycle step by step in logical order.
i shall be grateful to u for the same.
thanks,
Irfan.

These are the 5 main steps:
Project and Program Management
     Global rollout planning
     Detailed implementation planning to task level
     Resource planning (including multinational projects)
     Risk management and troubleshooting
     Mentoring
     Quality assurance reviews
     Data conversion, interface and reporting strategies
Analysis and Design "Business Blueprinting"
     Documentation of current HR/payroll practices
     Process redesign to incorporate SAP HR best practice
     Design of client specific solutions using prototyping techniques
Realization
     System configuration
     Report specification and build
     Interface specification and build
     Conversion specification and build
     Enhancement specification and build
     Quality assurance testing
Final Preparation
     Technical and performance testing
     Conversion strategy and program development
     End user training preparation and delivery
     Final cutover and transition planning and execution
     Help desk support planning
Go-Live and Support
     Validate live business processes
     On going production support
     Post go-live end user training

Creating a search help with SAP UI5 and js?

Hello com,
I am trying to create a search help, collecting data from a table.
Is there something similar to the typical ABAP search help in SAP UI 5?
ABAP:
PARAMETERS: lv_alias TYPE dsh_alias MATCHCODE OBJECT dashboard_alias_f4,
I found this in the Demo Kit:
// create a simple SearchField
var oSearch = new sap.ui.commons.SearchField("providerSearch", {
        searchProvider: new sap.ui.core.search.OpenSearchProvider({
                suggestType: "json",
                suggestUrl: "/demokit/suggest?q={searchTerms}",
                icon: jQuery.sap.getModulePath("sap.ui.core", '/') + "mimes/logo/txtonly_16x16.ico"
        search: function(oEvent){
                alert("Search triggered: " + oEvent.getParameter("query"));
//attach it to some element in the page
oSearch.placeAt("sample4");
But how can i connect it with the specifiy data table?
Thanks,
Domenik

Hi,
you need to create OData service which will retrieve (search) the required information and then need to create UI5 application to consume it.
you can refer this blog How to Implement Value Help (F4) with SAP UI5 which covers both parts.
if you are having SP08 version of SAP Gateway then creating search help is very simple. refer my blog Creating OData service based on Search Help
Regards,
Chandra

Need a document with steps and process for IBCM implementation

Dear Frds,
I need a documents which contains steps and process to implement IBCM for SCCM2012.
I have following things in Intranet:
1) SCCM2012 in intranet and clients are reporting at this movement.
2) Intranet based Domain PKI infra.
Thanks.....
Raja

I strongly suggest taking a look at Direct Access. Most people looking at IBCM end up going with Direct Access since it requires fewer steps/less infrastructure and yet provides far more value.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

TS1538 I have gone through all troubleshooting steps and can't find a solution. My iPhone is no longer showing up in iTunes. Can anyone help?

I have gone through all of the troubleshooting steps and still do not see my iPhone 4 (6.1.3) when I connect with USB to iTunes. Can anyone help?

I'd try removing and then re-installing iTunes. An uninstall will not remove your music etc. That should re-install the usb drivers etc. I don't think you can separately delete and install the drivers.

I have an iphone 4 jammed in MDU mode, I conect to itunes and asked to restore, it went through all the steps and nearly completed it gives me an error message saying cannot be restored error -1. Can anybody help me how to restore my iphone

I have an iphone 4 started the problem saying no service, then when restarting asked to connect to itunes and became jammed in MDU mode, I connect to itunes and clicked on restore, it went through all the steps and nearly completed it gives me an error message saying cannot be restored error -1. Can anybody help me how to restore my iphone. or what to do next, some reseller asked me to go the shop where I bought to replace it for me as this error cannot be restored by any shop. It has to be returned to apple and get it replaced. The warranty already expired and don't know what to do.
Please help

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694#error1

HT1212 my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spell

my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.

TS4425 I do thevspet by step and "terms and conditions" never appear, some one help!!!!

I do the step by step and "terms and conditions" never appear, some one help!!!!

Okay. Well, I can see the image tags and I think there might be something wrong with how my page is formatted through Blogger. I will go back to my original format and see. Right now, Podmedic says:
It says this for the MP3 files, but I don't get it because the file plays as soon as I click it:
"Media enclosure not created because: The URL was unavailable or Feedburner could not receive a response within 10 seconds."
It shows errors for the top image and the email link, but I can ignore that.
At the end, I just have no idea what this means:
There is a link listed that begins with "feedproxy.google.com" along with some more detail and the error for that says:
"The content type returned from your host server was a text type, not a binary media type. Podcast content should always return a binary media type, such as audio/mpeg for audio, or video/mpeg for video."
In SmartCast, I am not sure if it would help if I changed the enclosure setting to "audio files only" as it is set to "any rich media file" now. First, though, I am going to try to change the template I have in Blogger back to what I used originally, when everything worked.
I can see "image" tags in feedburner and it shows in iTunes now, so I am thinking this is more of a Blogger problem, and not necessarily iTunes now even though the images did need to be added.

SAP Roles and Access for SAP Implementation team members

Hi,
Is it correct practice to give SAP_ALL role access for all SAP Implementation team members in Dev and QA?
If not, what is the correct practice?
Kindly let me know

Madhu,
It is NOT correct practice to give anyone SAP_ALL in any of the systems; not DEV, not QAS, and certainly not PRD. However, many implementation teams (and particularly consultants from SIs) insist that they cannot possibly do their jobs without it. This is completely incorrect as there are specific roles for them to use for that purpose. The only circumstance where it could be justified is if you require a special "firefighter" role - and even then, I would still be a bit doubtful.
You should also consider that once you have given someone SAP_ALL, they will fight tooth and nail to keep it. It also means that they probably are not testing the user roles correctly. Most of those that insist they need it simply do not understand the security issues and probably don't care.
Just think; if they have access to do soemthing that they shouldn't and then cause a big problem, are they the ones that will have to fix it or are they going to expect you to do it? If they expect you to clear up after them, then you have the right to insist on restricting their access to cause issues in the first place.
But I know just how demanding they can be....
Best of luck
Tony

Steps and Check list SNC implementation

Dear Experts.
Believe that you'll spend some time to put your precious quotes on this query.
1. How SNC implementation should be done, what are the steps to be carried out?
2. What are the Pre-requisites and check list for implementation?
3. What testing needed to be done after implementation.
Thanks in advance
Vinoth

Hi Vinoth,
Responsibilities:
BASIS / Security :
1. System Upgrade / Installation
2. Post upgrade activities like SPAU (if its upgrade), notes that are required to be implemented.
3. Email / SMS set-up (Exchange infrastructure)
4. Work-out the authorizations that need to be provided for different Business roles
XI / PI :
1. Download the content for latest SNC release
2. Set-up communication between ERP <> XI <> SNC
3. Check SLDCHECK
4. Configuration scenario e.g. Sender Agreement, Receiver Agreement, Receiver Determination, Interface Determination, etc.
Functional :
1. Master Data set-up
2. Required customizing
Hopefully, this should give an overall idea.
Regards,
Sandeep
Re: What are the ODM components available in SNC?
Posted: Aug 6, 2010 10:39 AM in response to: Sandeep Mandhana Reply
Hi Nikhil & Sandeep,
Thanks for your valuable information.
Could you please let me know the checklist and steps that should be followed while implementing SNC.
Basis/Security peoples responsiblities?
XI/PI peoples responsibilites?
Functional peoples responsibilities?
Thanks in advance
vinoth

IMG settings documentation [steps and screens]

hi all.,
IMG settings documentation [steps and screens]
1     Free goods inclusion & Exclusion
2     Stock transport order
3     Consignment stock
4     New access sequence for price
5     Kit product [Sales BOM]
6     Classification
7     SIS settings
8     Mass data change[customer&item]
Regards.,
Lakshmanan.S
<b>E-mail : [email protected]</b>
provide rewards point

Hi
The following t-codes and link will be useful to you
V/N4 Free goods types - Sales
V/N5 Free goods: Procedure for SD
V/N6 Free goods procedure determ. SD
VBN1 Free goods - Create (SD)
VBN2 Free goods - Change (SD)
VBN3 Free goods - Display (SD)
M/N2 Create free goods table
M/N3 Display free goods table
OMA5 Field catalog V_T681 free goods (SD)
V/N1 Maintain accesses (free goods - sls)
V/N2 Create free goods table
V/N3 Display free goods table (SD)
WC07 Number ranges for free goods
Mohan

Can not get Itunes match to work. It stops on the first step and on my status bar it just says "sending information to apple" this goes on for hours. Help please.

Help please. I cannt get itunes match to work. It just stops on the first step and the status bar continues to say "sending information to apple" for hours. Any ideas?

I am having a similar issue with iTunes Match. It keeps hanging up on the same number of files (11035 of 15455) during STEP 2. I've tried signing out, re-opening iTunes, re-booting, etc. Still comesup stuck for hours. What I also don't understand is why the "iCloud Status" option in "View/View Options" disappears intermittently. It was there when I first booted up this morning and I reviewed all my music files to see if there were any "errors" and there werne't any. But after Match gets stuck on the same file niumber (11035) I 've signed out and re-booted and now the "iCloud Status" check box is missing from "View Options" (only the "iCloud Download" option remains present all the time. Please help. (I've also checked to make sure all the music files are within the suggested bit rate parameters and file type - This is also a brand new iMac out of the box). Running out of troubleshooting ideas and beginning to think this service just doesn't work well.

I have photoshop elements 10 and when I put the 1st disc in it will not load it just launches. I have gone through the step and troubleshooting in the manual but no dices please help.

I have photoshop elements 10 and when I put the 1st disc in it will not load it just launches. I have gone through the step and troubleshooting in the manual but no dices please help.

Hi,
You can download Photoshop Elements 10 from the link below and Install with the serial number,
http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
Thank you

Steps and documentation help in SAP implementation

Similar Messages

Maybe you are looking for