Regarding Loading Grp
Hi All
How is the loading group determined in the sales or delivery?
Hi Kiran,
1)You can define the loading group in SPRO by using the following menu path
2)Logistics ExecutionShippingBasic Shipping Functions--Define Loading Group.
3)You can also define the loading group in the Material Master Data in the Sales Gen Plant Data view.
4) The loading group tells you how your material will be picked it is also used in the determination of the shipping point rule and also in the determination of the plant.
5) The loading group does not come in the sales order or the delivery it is used in the determination of the shipping point and the plant which does come in the sales order...
Do reward points if this helps
Regards
Atul Keshav
Similar Messages
-
Ship.condition 01 loading grp 0003 plant MCP1 StLoc not defined Message no.
Dear all
Why I am getting this message when i try to add shipping point at item level in Quotation "Ship.condition 01 loading grp 0003 plant MCP1 StLoc not defined Message no.V1358"
Kindly help me to resolve this error.
Thanks and Regards
M.Dheerendar JainHi
check the following
Check your shipping conditions in sales order header shipping tab + loading group in material master + plant in sales order,
verify the same in OVL2, whether its mainatined or not.
1. Shipping condition maintain in Sold to party of ur customer master,
2. Loading group should be maitained for perticular Sales area and plant in Material Master for Sales: General/Plant Data.
3. Plant should be available in sales order
IMG -> Logistics Execution -> Shipping -> Basic shipping functions -> Shipping point and Goos receiving point determination -> Assign Shipping Points.In that determine the storage location, loading group, plant, proposed shipping point and manual shipping point.
Combination of Shipping Point Determination=
Loading Group - (1-Material Master Record)
Shipping COnditions (1- Sales doc type , 2- Customer Master Data - Sold to Party)
Delivering Plant - (1-Customer Material Info record , 2- Customer Master Record & 3-material master record)
If you have done Copy of existing Shipping Point & renamed it. Then all the shippig Point determination Combinations will be copied.
If not, then you need to maintain manually in Shipping point determination customization -
Dear all
I have a sales order for 12 items, wherein for 3 items shipping point is not getting picked. Shipping point is determined as follows : Plant (entered manually) Shipping conditions (CMR/defined) Loading Grp (MMR).
When I checked the MMR, I found that for these 3 items no Loading grp field exists (forget about the value, complete field is missing) while for other it exists. Infact there are some more fields that dont exist for these 3 items.
I am in a fix. How is that possible? Do i need to contact an ABAPer?
regards
SapshedFirst go to MM01, select that material which is having the issue and select "Sales: General/Plant" view. Now see whether the loading group is flowing.
If not, go to OMS9, input 94 in "Field sel.group" and enter. There again double click on Loading Group and set the indicator to Reqd. Entry.
thanks
G. Lakshmipathi -
Need to add Loading Grp and Transportation Grp for a material
Hi Friends,
I want to add the loading grp and transportation grp for a material using transaction MM02 but I am unable to do so. Also would like to add a few more views like plant storage and accounting view for the same material using MM01 but I am unable to see these views in the selection box.
Can anyone please tell me how can I do so.
Regards,
Wasim.HI
Goto OMS2 and then double click on the material type and now select the required views in User Departments Tab.
To add loading group and transportation group you have to enter the Sales organization and distribution channel in MM02
regards
Prashanth -
Hi All,
As a part of first phase we have done LO extraction for all standard cubes. Now we have created custom cubes which are getting data from standard data sources like 2lis_02_itm, 2lis_02_hdr, etc. As the deltas have already being extracted by job controls, how to proceed further so that I can do Full, Init and Deltas for the new InfoCubes????
Please suggest me in this regard.
Thanks
JaySuppose a cube is already loading a first init and then is loading delta loads..everyday...since a long time..
Now if u do a full load to the same cube..it will receive not only init data but also data from all the deltas loaded in the past..
Basically..when u do init..all records from source system table are sent to BW and delta is initialized..now for the delta load next day..whatever records get added/changed in the source table..get pushed to the delta queue..
Now if u do a full load 1 year later..system does not need to look at delta queue..in the full load it simply pushes all records of the source table to BW..
Do full load to the new infocubes only(not for std ones,which are getting delta already)..new infocubes will surely receive all data.
Then remove init from infopackage and then do 'init without data transfer' to all data targets(old and new)..so that deltas loads can go on as normal.
cheers,
Vishvesh -
Hi,
Currently I am using BW3.5. I tried to load the data from R/3 to BI system. My load has been failed due to some errors. It is showing error messages like - Error 18 in the update. Can any one explain me what is the solution for this?
Thanks & Regards
AnushaHi .
did you check the short dump for that load in st22 .. copy that request and search for short dump for that request in R/3 and check the short dump messages..if the laod is through PSa then check the detial error message in PSA .Did you try repeating the load once .
this might have happend due to invaild characteristics ..
chekc this links
URGENT : ERROR 18 while updating the Infocube from ODS....
Error 18 in the update
Regards,
shikha -
Hi all,
i Have a datasource for GL4.. it contians HUGE amount of data.
We are trying to do a init with data transfer giving selections for fiscvar like
package 1: 001.1990 to 016.2001
package 2: 001.2002 to 016.2003
package 3: 001.2004 to 016.2005
package 4: 001.2006 to 016.9999
all the packages are init.
but it gives short dump 4 the first package itself
my question is:
1. which is the most efficient way to load the data.
2. for larger dataloads, what processing type is the best.
please help as it importantHi Ashwin,
First check at source system side (T.code : RSA3). how may records will come for specified intervals..
And also you are getting the short dump . So please check reasons at T.code ST22 if it was space problem then inform to basis people to add extra space .. for data marts and PSA
If you are getting the Max no.of records, then load the historical data by intervals, after that initialize it and extract the new data by delta update method
Regards,
PRK -
Regard load detail PO line accroding to choose PO#+linenum
Hi,Expert,
The scenario is as follow:
I create the form to copy from PO detail list , so I must get docentry + linenum that is primary key.
but loading PO line are so many that the system of PC halted.
Now I add the primary key of docentry + linenum as array form.
and then by running sql query to add martix .
How can I do to get a better solution?
Apperciate your help .
Best Regard
Eric WangHello Eric,
1.Is it possible to use Grid instead of Matrix?
2.Working with xml will be better instead of add row by row in the matrix.
Prepare all purchase order lines in the matrix of the form as xml string before load the form from xml.
You may refer to the following thread:
[Slow performance of reading row by row in Grid|Re: Slow performance of reading row by row in Grid]
It will be better if you can post the code here for analysis.
Kind Regards, Yatsea -
Regarding Loading the data from DSO to cube.
Hello Experts,
I have DSO which loads data from psa using 7.0 tranformation (using DTP). And i have a cube which loads the data from that DSO using 3.x transfer rules. Now i have deleted the init request for a infopack before load the data into DSO. But when i load the data from DSO to cube by right click on DSO -> click On Additional Functions -> update the 3.x data to targets, It is giving me an error like 'Delete init. request REQU_4H7UY4ZXAO72WR4GTUIW0XUKP before running init. again with same selection
Please help me with this.
i want to load the data in the init request to cube..
ThanksHi Shanthi,
Thanks For reply. I have already deleted the init request from source system to DSO and then i have tried still i am getting the error.
Thanks -
Regarding loading of excel data into oracle database
hello,
Can someone help me in knowing that how can we load excel sheets data into oracle database.
I will be really thankful to you.
GursimranHi,
There is tool given by oracle "Oracle Bulk Loader "
you can use this.
But in order use this you need a control file, which specifies how data should be loaded into the database; and a data file, which specifies what data should be loaded.
Example :- this is the control file which has information how the data is processed.
LOAD DATA
INFILE test.dat
INTO TABLE test
FIELDS TERMINATED BY '|'
(i, s)
Example :- test.dat which is the data file or say your excel sheet or document
(1, 'foo')
(2, 'bar')
(3, ' baz')
example of Loading :-
sqlldr <yourName> control=<ctlFile> log=<logFile> bad=<badFile>
sqlldr testing control=test.ctl log=test.log
Thanks
Pavan Kumar N -
Regarding loader Error in flash as3
My project is converting as2 to as3 flash file. In AS2 , I am using "loadmovie" to load the external swf also it gets totalframes of swf . It works correctly. But In as3 i am using "loader" to load the external swf. But the "loader" is not calculated the external swf total frames.Then how to calculate totalframe in as3. plz give any idea
Here is an example of a progress listener and funtion for AS3.
loader.addEventListener(ProgressEvent.PROGRESS, progressHandler);
private function progressHandler(evt:ProgressEvent)
var perc:Number = evt.bytesLoaded / evt.bytesTotal;
if(evt.bytesLoaded == evt.bytesTotal)
evt.target.removeEventListener(ProgressEvent.PROGRESS, progressHandler);
//now you can do something else -
Regarding Open Firmware. Serious issue regarding Load Base change.
Hello.
Okay, i have purchased a Mac Mini G4 quite some time ago, and i recently sold it to a friend.
This friend is trying to port MorphOS to the Mini for fun.
In doing this he wanted to change the load base setting in the Open Firmware.
At first he set it higher, den twice as high and now to:
0x1000000 and then: 0x2000000.
After this the Mini displayed some text about flashing ROM and then turned off. After this it would not turn on..
Holding down the power button gives the <CHORD> sound plus some squeeking sounds, but nothing else happens.. Nothing is initiated, not even USB.
In my head the only possible solution now is to reflash the OF ROM.
What I need from you guys is info on how to do this and what tools is required.
Also if you have any experience with bustet OF setups, how could they be fixed.
This is quite a major issue as the Mini is almost completely DEAD as it is now. It doesn't boot, it doesn't move the DVD drive.. It goes <CHORD> and then nothing.
Please, help :P
Mac Mini Mac OS X (10.4.7)
Mac Mini Mac OS X (10.4.7)unfortunately i cannot open any windows, no. the color wheel spins for an indefinite period of time. any program i try to open essentially freezes. i also cannot successfully restart the computer via the apple menu, the only ways i can restart are if i use the power button directly or if i restart from the login screen. i can't open anything, really. it tries to open the programs and starts to but after a while seems to time out. it indicates that it's still trying but after a few minutes shows no progress. if my screensaver goes on and i wake my computer up again, it freezes on the screensaver and can't get out of it. i tried starting up from the tiger disk but that wasn't working either (when i start up from any disk that isn't my hard drive, my monitor resolution isn't recognized, so it won't display anything - so every time i've had to upgrade in the past i've borrowed another monitor for the process).
-
Regarding loading the data into ODS
Hi all,
I am having a sitaution where I had filled an ODS with data. Now few fields have to be added to the ODS for reporting purpose. I have added the fields. But I am having doubt in how to fill those fields alone in that ODS so that the data can be represented in the Reports on that ODS. Is there any prerequits and precautions that have to be taken????
Regards
YJHi,
Just write a prog and execute it to fill the added field.
ex: if sy-subrc <> 0.
message s000 with 'No records selected for the specified criteria.'.
else.
loop at int_tab.
update /bic/aODS00 set
added_field= int_tab-added_field
where condition.
if sy-subrc = 0.
counter = counter + 1.
endif.
endloop. -
Regarding: Loading data from R/3 To BI for a Generic Data source
Hi Every,
Need Help Urgent
I had created a Generic data source with function Module as the data source, in Rsa3 it is working fine.
1-> I had replicated the data source to Bi then i had created a info package and then I executed the same. when it is getting the data and it is show in the request monitor (Number of records ) but the status is not changing from Yellow to Green.
Status in Step by step analysis is every step is green Except "Data selection successfully finished ?" (RED)
2-> Then I had seen the Back ground job in Source system which is executing still. I waited for it for a long time but nearly 30 min.
(I had done Steps one and 2 number of time by activating replicating the data source and so on, but still their is no change in it)
3-> Then I had canceled that back ground job with the help of BASIS (as i feel that it is something going wrong).
4-> I feel that their is some thing wrong in the Code of Extractor.
Please Help...............
""Local Interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE ZBI_MATGRIR OPTIONAL
*Need to get the data only for two Gl account which are fro material purchase while MIGO
*G/L Account Numbers: 0010502001 0010502002
data: E_T_DATA1 type table of ZBI_MATGRIR.
RANGES: R_BUKRS FOR BSIS-BUKRS,
R_BUDAT FOR BSIS-BUDAT,
R_GJAHR FOR BSIS-GJAHR,
R_HKONT FOR BSIS-HKONT.
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
S_COUNTER_DATAPAKID LIKE SY-TABIX,
S_CURSOR TYPE CURSOR.
*Declare
TYPES: BEGIN OF TY_FAGL,
RBURS TYPE FAGLFLEXA-RBUKRS,
RYEAR TYPE FAGLFLEXA-RYEAR,
DOCNR TYPE FAGLFLEXA-DOCNR,
BUZEI TYPE FAGLFLEXA-BUZEI,
DOCLN TYPE FAGLFLEXA-DOCLN,
PRCTR TYPE FAGLFLEXA-PRCTR,
SEGMENT TYPE FAGLFLEXA-SEGMENT,
END OF TY_FAGL.
DATA: GT_FAGL TYPE TABLE OF TY_FAGL,
GS_FAGL TYPE TY_FAGL.
IF I_INITFLAG = SBIWA_C_FLAG_ON.
CASE I_DSOURCE.
WHEN 'ZFI_GL_M4'.
WHEN OTHERS.
IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
LOG_WRITE 'E' "message type
'R3' "message class
'009' "message number
I_DSOURCE "message variable 1
' '. "message variable 2
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDCASE.
APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
S_S_IF-REQUNR = I_REQUNR.
S_S_IF-DSOURCE = I_DSOURCE.
S_S_IF-MAXSIZE = I_MAXSIZE.
APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUKRS'.
MOVE-CORRESPONDING L_S_SELECT TO R_BUKRS.
APPEND R_BUKRS.
ENDLOOP.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GJAHR'.
MOVE-CORRESPONDING L_S_SELECT TO R_GJAHR.
APPEND R_GJAHR.
ENDLOOP.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUDAT'.
MOVE-CORRESPONDING L_S_SELECT TO R_BUDAT.
APPEND R_BUDAT.
ENDLOOP.
*GRIR Inventory (RM/Stores/Spares/FG) 10502001
*GRIR Services & Others Payable 10502002
R_HKONT-SIGN = 'I'. "i_t_select-sign.
R_HKONT-OPTION = 'BT'." i_t_select-option.
R_HKONT-LOW = '0010502001'.
R_HKONT-HIGH = '0010502002'. "i_t_select-high.
APPEND R_HKONT.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT BUKRS
AUGBL
ZUONR
BELNR
GJAHR
BUZEI
BUDAT
HKONT
BLART
MONAT
BSCHL
SHKZG
DMBTR
WAERS
FROM BSIS
INTO TABLE E_T_DATA
WHERE BUKRS IN R_BUKRS
AND GJAHR IN R_GJAHR
AND BUDAT IN R_BUDAT
AND HKONT IN R_HKONT.
Fetch records into interface table.
named E_T_'Name of extract structure'.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE E_T_DATA1
PACKAGE SIZE S_S_IF-MAXSIZE.
IF SY-SUBRC <> 0.
CLOSE CURSOR S_CURSOR.
RAISE NO_MORE_DATA.
ENDIF.
DELETE E_T_DATA WHERE BLART NE 'WE'.
SELECT BUKRS
AUGBL
ZUONR
BELNR
GJAHR
BUZEI
BUDAT
HKONT
BLART
MONAT
BSCHL
SHKZG
DMBTR
WAERS
FROM BSAS
into table E_T_DATA
WHERE BUKRS IN R_BUKRS
AND GJAHR IN R_GJAHR
AND BUDAT IN R_BUDAT
AND HKONT IN R_HKONT.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE E_T_DATA
PACKAGE SIZE S_S_IF-MAXSIZE.
append LINES OF e_t_data1 TO E_T_DATA.
DELETE E_T_DATA WHERE BLART NE 'WE'.
ENDIF. "First data package ?
DATA: F_YEAR TYPE BKPF-GJAHR.
DATA: F_PERI TYPE BAPI0002_4-FISCAL_PERIOD.
IF E_T_DATA[] IS NOT INITIAL.
SELECT RBUKRS
RYEAR
DOCNR
BUZEI
DOCLN
PRCTR
SEGMENT
FROM FAGLFLEXA
INTO TABLE GT_FAGL
FOR ALL ENTRIES IN E_T_DATA
WHERE RYEAR = E_T_DATA-GJAHR
AND DOCNR = E_T_DATA-BELNR
AND RLDNR = '0L'
AND RBUKRS = E_T_DATA-BUKRS
AND BUZEI = E_T_DATA-BUZEI.
WHERE RYEAR = E_T_DATA-GJAHR
AND DOCNR = E_T_DATA-BELNR
AND RBUKRS = E_T_DATA-BUKRS.
AND DOCLN = E_T_DATA-BUZEI.
ENDIF.
LOOP AT E_T_DATA.
IF E_T_DATA-SHKZG = 'H'.
E_T_DATA-DMBTR = E_T_DATA-DMBTR * -1.
ENDIF.
CLEAR: F_YEAR.
CALL FUNCTION 'BAPI_COMPANYCODE_GET_PERIOD'
EXPORTING
COMPANYCODEID = E_T_DATA-BUKRS
POSTING_DATE = E_T_DATA-BUDAT
IMPORTING
FISCAL_YEAR = F_YEAR
FISCAL_PERIOD = F_PERI.
DATA: V_DOC(6) TYPE C .
CLEAR: V_DOC.
V_DOC = E_T_DATA-BUZEI.
IF V_DOC IS NOT INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = V_DOC
IMPORTING
OUTPUT = V_DOC.
ENDIF.
aS PROFIT center is not updated in all the lines in Bsis
READ TABLE GT_FAGL INTO GS_FAGL WITH KEY RYEAR = E_T_DATA-GJAHR
DOCNR = E_T_DATA-BELNR
RBURS = E_T_DATA-BUKRS
BUZEI = E_T_DATA-BUZEI.
IF SY-SUBRC = 0.
E_T_DATA-PRCTR = GS_FAGL-PRCTR.
E_T_DATA-SEGMENT = GS_FAGL-SEGMENT.
ENDIF.
*As we are using the amount DMBTR in which the amount
*will be in company code currency that is Local currency
*group currency always in the main company code currency.
CONCATENATE F_YEAR '0' F_PERI INTO E_T_DATA-FISCPER.
MODIFY E_T_DATA. " from gs_bsis transporting dmbtr fiscper.
CLEAR: E_T_DATA.
ENDLOOP.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.Hi,
Please check the log of same jobs for last week and check is today its taking more time,also check with basis is their any backup initited at same time.
Moreover until the background job failed automatically its difficult to imagine what is the exact issue.
Thanks, -
I would like to use Turbotax for mac. I am a new user and just bought my Imac desktop a few weeks ago. Can I purchase and download the software from Apple? I do not have an optical drive so I need to use the download method.
Thank you for your reply. I may not have phrased my question correctly but what I was ondering is whether Apple sells this software download or whether it is only available thru Intuit. I have tried severl other vendors (Micro Center, Costco, Bjs Wholesale) and none of them have it available for download. Must I go thru Intuit only if I use this method?
Maybe you are looking for
-
I just purchased a MB Air 13", as well as a Seagate Slim Backup Plus. I have an older external hard drive that I was using with a Dell laptop. I would like to get the files off of the older external hard drive, and onto the new Seagate drive. Is this
-
How to output times of foreach
i want to output the times of c:foreach, for example <c:forEach items="unitList" var="element" > <!--how can i out put times--> </c:forEach> like for(int i=0;i<len;i++) array=1; i want to output i, in c:foreach, how to do it ,thank you very much!
-
OID/Portal - Restrict Special Characters to be used in Password
Hi, Does anyone know how I can restrict the use of special characters ($, &, £...etc) in the OID password? I cannot see an attribute to achive this? orclpwdIllegalValues will stop certain words, but I just want to restrict the use of any of the speci
-
How can I access my stored files from a previous backup?
I recently had to restore my Macbook and I backed up my files on a Lacie hard drive. However, now when I try to access those files It says that I do not have permission. Is there any way to access important files without having to do a full restore o
-
Why can't I connect to the iTunes store to update my apps anymore?