Regarding Mapping Types in XI
Hiii Everyone,
When I checked the Mapping Runtime Entries in the Table SMPPMAP3 I found the following Maping Type
R3_ABAP -> ABAP Mapping
JAVA -> JAVA Mapping
XI_TRAFO -> Generated Mapping (Graphical Mapping Tool)
XSLT-> XSLT Mapping (Java)
R3_XSLT-> XSLT Mapping (R/3)
My doubt is What ever Mapping we do using Graphical Mapping Tool in IR, It shows Mapping Type as JAVA, why it wont show XI_TRAFO -> Generated Mapping. So In what cases or When does it show Mapping Type as XI_TRAFO
I have also observed in some of the Entries it shows Mapping Type as IDENTITY. What does this Indicate ?
Regards,
Varun
hi varun
whatever the mapping are being used in XI , finaly its converted to JAVA bytecode and then its executing on Java Stack.
Regards
Sandeep
Similar Messages
-
Hi mates,
I've maintained the additonal mapping types required in the exchg profile param...com.sap.aii.repository.mapping.additionaltypes with the value R3_ABAP|Abap-class;R3_XSLT|XSL (ABAP Engine).
But, I'm not able to see the above mapping types in the drop-down list in Intf Mapping in IR.
The desc in exhange profile reads like this.......
<i>Technically, the Integration Server calls the ABAP function CALL_PARTNER_MAPPING with the additional mapping type name as destination. Therefore, the additional mapping type name must be registered as RFC-Destination in the Integration Server, too.</i>
On an XI system-SP13...I did not maintain any RFC dest for this pruprose. But I cud use additional mappig types.
Currently I'm trying this on SP16. Its not working.
Am I missing out on any step here? Plz provide ur inputs.
Thanks in advance
praveenHi,
>>>>But, I'm not able to see the above mapping types in the drop-down list in Intf Mapping in IR.
just type in the ABAP mapping class name from SE24
and it will work
Regards,
michal -
Related Content Field Mapping using "Page Field" mapping type
In PeopleBooks it refers to a Page Field mapping type whene mapping fields from the component to it's related content.
Is this a misprint in PeopleBooks, did this feature not make it into 8.50.09 or is this option only available under certain circumstances.
I'm trying to pass a non key field from level 0 to the rel content url.
Thanks to anyone who can shed some light on this.
GrahamHi Jim
Thanks for the reply.
It appears that you can't select the "Page Field" mapping type unless you have the related content specified by PAGE ratehr than component.
PBOOKS states Page Field: use when you want to map the service parameter to any level 0 page field.
In the component buffer fields in level 0 could be any page. I was hoping to pass ANY level 0 field through to the Rel Content URL for any page in this component.
Kind regards
Graham -
ERPI Concatenate Segment in the metadata rule Mapping Type
Hi Gurus,
I'm having an issue with ERPI Concatenate Segment. When i use mapping type as Concatenate Segment to concatenate Accounts and SubAccounts in the Metadata Rule receving Execution error in the ODI, but able to use FDM type without any errors and able to extract data from EBS 11.
My Target application is HFM (Classic) application.
I did update the new HFMDriver.dll, changed in the snpsconf file and updated the odi driver path in the environment variables.
While checking the aif.log from temp folder found error as below
ERROR [DwgCmdExecutionThread]: Error occurred during load process Error occurred in driver while connecting to Financial Management application [APPCONSOL] on [10.10.17.46] using user-name [admin]..
While check in the process details found error as below
Error occurred during load process. Error occured in driver while connecting to Financial Management application
Error in LKM COMM Load Members into HFM - Load Metadata to HFM
I checked all the settings in the Topology Manager and all the connections are successful.
Appreciate your help.
Regards,
KHi,
From complex transfer/update rule to transformation in routines, please check below note
Note 1052648 - Migrating transfer rules and update rules for BW7.x
Thanks -
Hi Buddies,
How do u transport mapping from development to quality server. How many types of mapping r there.
Thanks in advance
Regards,
Nagaraju TankalaHi Nagaraju,
use CMS to transport mappings.
mapping types:
1.ABAP mapping
2.JAVA mapping
3.Graphical Message Mapping
4.XSLT mapping.
also see the below links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8a57d190-0201-0010-9e87-d8f327e1dba7
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/190eb190-0201-0010-0ab3-e69f70b6c257
Regards,
Nagarjuna. -
OracleDataAdapter.FillSchema - mapping types in db to DataTable types
OracleDataAdapter.FillSchema(table, Source) will configure a DataTable to match a table in database schema.
How does FillSchema map types in the db schema to types associated with the DataTable columns?
E.g. if the db column is NUMBER(2,0) the DataTable column appears to be System.Int16.
How is this mapping done? Can it be configured?
Basically I'm looking for documentation on the mapping from DB definitions, to
Oracle.DataAccess.Client.OracleDbType
and
System.Data.DbType
since the Output type of OracleParameter can have its DbType to insure that the values returned are .NET types.How does FillSchema map types in the db schema to types associated with the DataTable columns?
How is this mapping done? Can it be configured?
It's done internally as you might imagine and I'm not aware of any external configuration with one exception (see below).
If you enable ODP trace you can get a flavor of what happens:
Abridged copy of trace file output...
TIME:2013/02/20-20:32:52:633 TID:1688 (ENTRY) OracleDataReader::GetSchemaTable()
TIME:2013/02/20-20:32:52:643 TID:1688 (ENTRY) OracleDataReader::GetProviderSpecificFieldType()
TIME:2013/02/20-20:32:52:643 TID:1688 (EXIT) OracleDataReader::GetProviderSpecificFieldType()
TIME:2013/02/20-20:32:52:643 TID:1688 (EXIT) OracleDataReader::GetSchemaTable()
TIME:2013/02/20-20:32:52:643 TID:1688 (ENTRY) OracleDataReader::GetName()
TIME:2013/02/20-20:32:52:643 TID:1688 (EXIT) OracleDataReader::GetName()
Etc...The data adapter has a property called "ReturnProviderSpecificTypes" which does what its name suggests. It defaults to False but you can set to True (as I did for the above trace).
As noted in the documentation, this property "Determines if the Fill method returns ODP.NET-specific values or .NET common language specification values".
Keep in mind though that ODP Types are not the same as members of the OracleDbType enumeration.
Regards,
Mark -
Java.util.Map type return in webservice method
Wonder, how we can return a java.util.Map type from a webservice deployed on a
weblogic 7.x environment..
any input is appreciated.
-GirishThanks Michael. it helps.
-Girish
"Michael Wooten" <[email protected]> wrote:
>
Hi Girish,
By definition, a Java object used as a input parameter (or return type)
of a web
service operation, must has a no-arg constructor in order for a Java-based
Web
Service Stack to serialize/deserialize it to/from XML. java.util.Map
is an interface,
so it does not meet this requirement :-)
If your web service operation is just trying to return (or accept) a
hash map
of "arbitrary complex types", I recommend that you consider switching
this to
be an "array of arrays of specific complex types". The reason I say this
is because,
it allows even non-Java consumers to look at the <schema> elements in
your web
services' WSDL, and figure out all the possible "arbitrary complex types"
that
might be in this array. If you envision the consumer getting a box, where
it can
literally contain anything, you can probably see how much more code they
would
need to write, than if they knew the the box contained a box of these,
and a box
of these, and so on, and so on.
Basically, all the "old school" type-safety rules still apply to web
services
computing. If you want web services with descent performance metrics,
you're probably
going to want to keep a lot of the "old school, distributed computing"
practices
in mind, when you design your stuff :-)
That said, WLS 7.0 SP1 does not currently have a "built-in" HashMap codec.
But,
you could create one using the information at:
http://edocs.bea.com/wls/docs70/webserv/customdata.html#1054435
Regards,
Mike Wooten
"girish" <[email protected]> wrote:
Wonder, how we can return a java.util.Map type from a webservice deployed
on a
weblogic 7.x environment..
any input is appreciated.
-Girish -
Class-map type inspect match access-group name question
I'm creating a zone base firewall solution and all appears to be fine until I create a class-map type inspect match-all or any
and match access-group name acl to match an extended ACL and once I match it the commands runs but when I go back to view the configuration of the class-map it is not there.
I have tried other named ACLs and it works if the ACL contents are simple like permit ip any any but for complex ACLs with ranges, tcp, udp, icmp etc etc it does not take it but it does not report an issue either and when I view the config its not there for the complex extended acl but for the simple extended acl it does show.
Any restrictions or possible bugs I'm running into?
Thanks for all lookingThis could be a bug. Could you post the exact configuration you are trying to implement? I just set up a small test and I have been unable to reproduce what you are seeing. I would like to see if I get the same result using your config.
Please remember to select a correct answer and rate helpful posts -
hi all,
i need some information regarding date types infotype 41.
i need to print date types in sequential manner like dar01 dar02 dar03 like upto 12 date types.
can you please suggest me how should i print them.
thanks,
madhavi.Hi,
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Enhancement of Infotype
Check the following
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
Infotype Enhancement overview screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
with regards,
Hema SUndara. -
Hello,
any body tell me What are the available user mapping types ?
Thanks,
KiranThere are no types in user mapping.
User mapping is used when there are different user id's across system landscape and they cannot be managed centrally.
Using user mapping we can map portal user id's with other systems like R3, non sap systems etc..
so that user no need to aiuthenticate again. It is one method of achieving SSO in portal.
http://help.sap.com/saphelp_nw04s/helpdata/en/f8/3b514ca29011d5bdeb006094191908/frameset.htm
Also check the blogs for more information:
How to setup R/3 Reference system for User Mapping
Creating R/3 System and user mapping problem
User Mapping-based Single Sign On
Raghu -
Tracback and reload after "sh policy-map type inspect zone-pair"
Hi all
hitting the issue that the device reloads after issueing "sh policy-map type inspect zone-pair"
Patrick
For image:
Cisco IOS Software, ISR4400 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(2)S, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Wed 26-Mar-14 21:38 by mcpre
Uptime = 00:09:36
Happens in isr4400-universalk9.03.12.00.S.154-2.S-std.SPA.bin and isr4400-universalk9.03.11.01.S.154-1.S1-std.SPA.bin.
CMD: 'h policy-map type inspect zone-pair'' 15:25:08 CET Fri May 23 2014
Exception to IOS Thread:
Frame pointer 0x7FE738ADCE70, PC = 0x2824D9F
UNIX-EXT-SIGNAL: Segmentation fault(11), Process = SSH Process
-Traceback= 1#0f900c654b45d2459c0c267ce51d6164 :400000+2424D9F :400000+974FE12 :400000+974FAB8 :400000+974F5E2 :400000+27A9BB0 :400000+28297C6 :400000+281182C :400000+2810189 :400000+975962A :400000+9759522 :400000+98645DA :400000+975991D :400000+AC061C :400000+ABF735 :400000+ABDAAD :400000+3FCC510
Fastpath Thread backtrace:
-Traceback= 1#0f900c654b45d2459c0c267ce51d6164 c:7FE7877A2000+BE012
Auxiliary Thread backtrace:
-Traceback= 1#0f900c654b45d2459c0c267ce51d6164 pthread:7FE782EFD000+A7C9
RAX = 00007FE738ADCEC4 RBX = 00007FE735F40608
RCX = 0000000000000001 RDX = 000000000000001F
RSP = 00007FE738ADCE70 RBP = 00007FE738ADCE70
RSI = 0000000000000000 RDI = 00007FE738ADCEC4
R8 = 0000000000000001 R9 = 0000000000000000
R10 = 0000000000000002 R11 = 0000000000000002
R12 = 000000000000001D R13 = C88E990B00000000
R14 = C4CEAD38E77F0000 R15 = A0ED3436E77F0001
RFL = 0000000000010202 RIP = 0000000002824D9F
CS = 0033 FS = 0000 GS = 0000
ST0 = 0000 0000000000000000 ST1 = 0000 0000000000000000
ST2 = 0000 0000000000000000 ST3 = 0000 0000000000000000
ST4 = 0000 0000000000000000 ST5 = 0000 0000000000000000
ST6 = 0000 0000000000000000 ST7 = 0000 0000000000000000
X87CW = 037F X87SW = 0000 X87TG = 0000 X87OP = 0000
X87IP = 0000000000000000 X87DP = 0000000000000000
XMM0 = 00000000000000000000000000000000
XMM1 = 00000000000000000000000000000000
XMM2 = 00000000000000000000000000000000
XMM3 = 00000000000000000000000000000000
XMM4 = 00000000000000000000000000000000
XMM5 = 00000000000000000000000000000000
XMM6 = 00000000000000000000000000000000
XMM7 = 5C5C5C5C5C5C5C5C5C5C5C5C5C5C5C5C
XMM8 = 36363636363636363636363636363636
XMM9 = 36363636363636363636363636363636
XMM10 = 5C5C5C5C5C5C5C5C5C5C5C5C5C5C5C5C
XMM11 = 5C5C5C5C5C5C5C5C5C5C5C5C5C5C5C5C
XMM12 = 00000000000000000000000000000000
XMM13 = 00000000000000000000000000000000
XMM14 = 00000000000000006F6F6B6B67676767
XMM15 = 00000000000000000000000020202020
MXCSR = 00001F80Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
I believe tracebacks are normally indicative of a bug. This might be something more suitable to raise with TAC. -
Postalias: fatal: unsupported map type: mysql
$ sudo pacman -Syu
postfix-2.9.6-1
(3/4) upgrading postfix [#########] 100%
postalias: fatal: unsupported map type: mysql
I don't like the 'fatal' in that last line. The only thing on Google I can find is [SOLVED] newaliases - unsupported map type: hash which hints at wrong flags during compile-time.
The aliases are working, I created a new test alias in postfix-admin that works. So maybe there's nothing really 'fatal' wrong.
Setup; my aliases are virtual and stored in a mysql database. A typical line in `/etc/postfix/main.cf` would look like:
alias_maps = mysql:/etc/postfix/virtual_alias_maps.cf
and in that file a database connection is described.
Last edited by foppe (2013-02-06 00:10:40)Hi,
Could you please open a new bug report on this over at bugbase.adobe.com? When adding the bug, please include the sample code or an application so we can quickly test this out internally. Once the bug has been added would you mind posting back with the URL so that others affected can add their votes and comments.
Thanks for reporting,
Nimit -
Error in ABAP Mapping (type SAP-ABAP, kernel error ID UNCAUGHT_EXCEPTION)
Hi ,
Scenario: Manually Purchase Order is created, automatically Sales Order should be created in the Target System through PI,
I have used Message Mapping which is working fine for single Customer and Vendor,
For Multiple Customers and Vendors i am using one ZTABLE, Only Message Mapping is not sufficient to my requirement.
Now i am using both Message Mapping and ABAP Mapping at a time in Interface Mapping. I created the class and done the development., whene i run the scenario i am getting the error as below,
*<SAP:Stack>Error in mapping program ZCL_SD_IDTO_POSO (type SAP-ABAP, kernel error ID UNCAUGHT_EXCEPTION) An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause Dereferencing of the NULL reference</SAP:Stack>*
*<SAP:Retry>M</SAP:Retry>*
*</SAP:Error>*
Please let me know.
Best Regards
VamsiHave u seen the ABAP mapping guide?
Refer this series to the ABAP mapping section.https:///people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
It will be very handy and useful. -
Regarding mapping error in RWB
Hi Every one
I am doing idoc to file scenario. In the message mapping
i tested the mapping it shows executed successfully.
but when i tested the RWB the receiver communication channel
it shows following error.
can anyone please help me how to solve this error
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_VendorMaster' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_VendorMaster' found in document', probably configuration error in file adapter (XML parser error)'HI,
As with prakasu and latika..
it is not an mapping problem.. it may be due to wrong configuration in the adapter communication channel configuration .. during receiver configuration the record set structure will be defaultely present, try to remove that and provide ur message type which u created in the IR..
and try to check with the test tab..
regards,
Kishore -
CRM R12.0.6 Map Type does not exist in the value set
Hi Everyone
When attempting to access Service Request Types in our CRM UAT Release 12.0.6 environment an error message appears referring to 'Value General for the flexfield segment does not exist in the value set'.
Checked the flexfields for the value set but did not set up a value for MAP_TYPES
Checked our PROD environment but no value set up as above.
Currently in progress of mapping service requests to responsibilites in UAT, could this be the cause and how to resolve? No mapping as yet for service requests set up in PROD. Has anyone else experienced this?
Thanks very much, LouiseHi IWolbers,
>>I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally
this has also happened during normal debbuging of running code on my machine.
So you mean that it worked well before, am I right?
If you debug the same app in other VS machine, does it work well? So we could make sure that whether it is related to the VS IDE.
Please disable all add-ins in your VS IDE, and then reset your VS settings, debug it again.
https://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx
Or you could run your VS in safe mode, debug it again, at least, we could know that whether it is the add-in's issue.
https://msdn.microsoft.com/en-us/library/ms241278.aspx
To make sure that it is not the project files' issue, create a new blank solution, copy the project files to the new solution, clean and rebuild the solution, check the result.
>>Once I step over this to the next line (screen shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
How about debugging it with "Step Into" instead of "Step Over"? Or you could add breakpoints between 234 line to 241 line, after the breakpoint is hit, check the watch window again. How about the result?
In addition, do you check other debugger window like local or others?
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Share a Gmail calender ?
Me and my wife each have a iPhone, a 3G and 3GS. We both have a Gmail account and I have created a calender, that I want to share with my wife. I have added my wife to my calender, and when she log into Gmail (on the computer), she can see my calende
-
Hello, I would like to sort the payment list by name of the vendor(lfa1-name1) and not with the number of lifnr (lfa1-lifnr). Actually the list is sort by lfa1-lifnr. I dont' would like to change the display just the sorting. Can you help me ? best r
-
How do you clean the entire memory and start over
how do you clean off the memory in order to start over
-
HT3406 how to backup text messages?
I read that text messages can be backed up but no place do I see an option to do this. How can I backup and then restore all text and imessages?
-
HT201412 after restoring ipad2 in itunes it doesn't continue. HELP!!
I accidentally update my ipad2 to ios6 it turned of then when I tried to turned it prompted to connect my ipad to itunes. so I did, clicked restore ipad, waited for 3hours, but then, there was an error regarding with the network. PLEASE HELP! I DON'T