HT201412 after restoring ipad2 in itunes it doesn't continue. HELP!!

I accidentally update my ipad2 to ios6 it turned of then when I tried to turned it prompted to connect my ipad to itunes. so I did, clicked restore ipad, waited for 3hours, but then, there was an error regarding with the network. PLEASE HELP! I DON'T KNOW WHAT TO DO.

* it turned off

Similar Messages

After restoring iPhone 4, iTunes is telling me that my SIM card is not supported. It is the same SIM I have always used with this phone.

After restoring iPhone 4, iTunes is telling me that my SIM card is not supported. It is the same SIM I have always used with this phone. What action can I take to convince phone that the SIM card is OK?

Hello again, update time.
Finally got to speak to a senior technical advisor at Apple today who was most confused until he back-tracked and double checked all the basics. He then realised that the actual serial number of my original phone (from the proof of purchase I sent him) was different to the one that they had recorded when they made the swap. I think he said it was out by one character and was actually showing as a mobile connected to AT&T (from the States). He said that the replacement phone was then set-up as per the serial number they had typoed into their system as locked to AT&T. The genius who did the swap at Apple Doncaster must have placed an unlock on it at the time in order for my 3 SIM to work at all. Therefore when I restored it, it returned to the settings of the incorrect original phone serial number!
So... Apple tech advisor said he can rectify the records and re-set the factory setting to an Australian iPhone on the 3 network within 12-24 hours. Fingers crossed all is good by tomorrow afternoon.
Thanks for your suggestions though, I had been trying everything to get it to work as I'm sure you know how hard they are to live without once you've got used to living with one!
Cheers, Tom.

TS1559 My Iphone 4S with the latest software, wifi setting is grayed out. Could not be resolved even after restore software in Itune.

My Iphone4S wifi setting was grayed off and could not set wifi on even after I have reset network setting and also restore software from Itune.

Hi YKLeong,
Thanks for visiting Apple Support Communities.
It sounds like you may have tried all the steps in the article below. If your wi-fi setting is still grayed out after trying the steps, the article suggests contacting Apple support for help with your iPhone hardware:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Follow these steps to resolve the issue:
Verify that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Ensure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If your issue is still unresolved, perform a software restore in iTunes.
Additional Information
If you are still unable to turn Wi-Fi on, please contact Apple for support and service options.
If you need to contact Apple, clicking the link above should take you to the right options for your region.
Best Regards,
Jeremy

Iphone 6 plus crashed after restoring backup from itunes

HI!, my brand new iphone 6 plus crashed down after restoring my backup copy from itunes (it worked for about 5 minutes before crashing down) and now it only switches from the low battery screen to the "apple" screen when plugged into the wall. It does not hard reset, itunes won't recognice it and when not plugged to the wall it is completely dead. Help please!!!

Hi Alcestesastur,
If you are having issues with an iPhone that is unresponsive after a software restore, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Not responding or does not turn on
Regards,
- Brenden

Why my atv can't set time and date after restoring it using itunes ?

when my atv restarting after I restored it using iTunes, it can't set the time and date.
the atv is connected to the net by wi - fi.
when I try to sign in using my apple id, I get a massage that the password is incorrect.
I have apple tv with ios 7.

The network and signal test on device won't give the full picture, for that you need a network report. Go to istumbler, netstumbler or similar, that will show true signal strength as well as any nose detected. You can also try Ethernet to help rule out WiFi issues.

Why my atv is not working after restoring it, using iTunes ?

My atv, is not working ( no image) only blinking after I restored it, using iTune.
what shoul'd I do ?

If you successfully restored (without error) and the issue persists then you will need to take to Apple for testing.

After restoring my ipod itunes crashes when veryfing restore with apple how can i skip this part?

Trying to restore my ipod touch 4th gen and after it extracts software itunes crashes when it trys to verify restoration with apple how can i cancel this last part

Try deleing the download file and try again. It is located here:
IPSW file location for Mac and Windows
I would also disable the computer's antivirus and firewall during the download and update/restore.

IPhone 3GS 3.1.2/5.11.07 baseband after restore normal to iTunes just went back to recovery mode

My iPhone 3GS erased all setting and content tried to restore back thru iTunes 10.5, it process the restoration but after it just went back to recovery mode? Can any one help me to this prob or suggestion

Did you try this, copied from http://support.apple.com/kb/TS3694 ?
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.

Had to restore iPad2 from itunes after IOS8 update with no option to restore from icloud backup.

since i lost everything on my ipad due to the IOS8 update, i thought i'd try to do a manual restore from my icloud backup, but the only backup listed is one from the day i did the update/restore. i'm pretty sure it's not going to help me recover everything that i lost since it's only 1.8gb. i know my ipad backed up to the cloud every couple of weeks when i charged it, so shouldn't there be other backup dates available? also, when i go to settings>icloud>manage storage>ipad, the backup options list every app i had on my ipad before the update/restore, but those apps are no longer on my ipad, so i'm not sure why they're listed in the backup options. apparently i can't even contact apple to help with this issue without paying $20, and i live 2 hours away from the closest apple store. any thoughts?

My philosophy is if you lost everything already anyway, you have nothing to lose by restoring the iCloud backup at this point. Besides, your apps will download from iCloud, if you were truly backing up with iCloud and not using iTunes. Apps are not part of the backup, app data is.
I would give it a try. If it doesn't work out, you are no worse off than you are now. But - your apps should still all download from the cloud even if the data is gone.

After restore from time capsule, login doesn't accept password

hi there
after a hard disc crash I've restored my system from a time caspule backup.
now I can not login to my system, as it doesn't recognize my password and there's only one user.
any idea, thanks for your help
eric

You'll need to use one of the methods in this article to reset the password.
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/
B-rock

After Restoring, my Windows XP machine doesn't recognize iphone

Hi, and thanks in advance for the help.
I recently restored my PC(running windows xp). And after downloading and installing the latest version of itunes. My computer fails to recognize the iphone. I've tried everything I can think of. But here is a list:
-restarting the Apple Mobile Device Service
-Restarting Itunes
-restarting the computer
-Uninstalling Itunes, and Reinstalling it
-plugging the iphone in different usb ports
-Plugging an Ipod classic in the same port(and it worked).
-Downloading the drivers moving them to C:/Windows/Drivers
-Hooking the iphone up to a different computer(and it recognized it
I don't know what to do now. Before I restored the computer it would recognize the iphone with no problem. But i still cannot see why it won't now.
Message was edited by: ~T.E.K.B.O.I.~

I had a similar problem when I upgraded to iTunes 8.0.2. My problem was that the iPhone driver in Windows XP was somehow corrupted. Uninstall/Reinstall of iTunes did not help, and neither did running "AppleDeviceSupport.msi".
The symptom I had was when I plugged in the iPhone, I would get three short "beeps" from the computer in rapid succession, followed later by two "beeps" that XP makes when disconnecting a USB device, even though I had not disconnected the iPhone.
Before I had this problem, I would get two "beeps" when plugging in the iPhone, indicating that Windows recognized the iPhone, and two "beeps" when disconnecting it.
What finally helped me was the following:
1. On the Start menu, click Run.
2. In the Open field, type devmgmt.msc and click OK. A list of devices will be displayed.
3. Scroll down to Universal Serial Bus controllers and click the small plus sign to expand this group.
4. If "Apple Mobile Device USB Driver" is listed and the device is working properly (right click on "Apple Mobile Device USB Driver", and select "Properties"), then your driver is OK and you don't have the same problem I was having (Stop here).
5. If "Apple Mobile Device USB Driver" is NOT shown, then plug in the iPhone to the USB port.
6. On my system, "Apple Mobile Device USB Driver" would then appear BRIEFLY with a yellow exclamation point beside it, and then it would go away after 10-20 seconds. If you see the same behavior, then, while "Apple Mobile Device USB Driver" is shown, right click on it before it disappears. Then select properties, and then select install device driver (or maybe update device driver - I'm not sure exactly what the choices were when I had the problem)
7. Windows XP then went searching for the driver, did some magic, and got the driver reinstalled and working properly.
Good luck - hope this helps.

3rd Generation I pod malfunctioned after restoring & updating with iTunes 7

After Updating to iTunes 7, itunes asked me to update my 3rd generation ipod's software. in order to do this i had 2 restore my ipod and so deleting everything on it. after having to re-install and re-configure my ipod in order to access it through iTunes it is now impossible to transer my songs back onto it. auto-syncing causes iTunes to freeze and then wipe my ipod. i attempted adding files slowly, just a few at a time but even this causes iTunes to crash eventually and so wipe my ipod again. im not sure whether the updating or my ipod is to blame for this problem. Any one else having similar difficulties or any advice?

Hello everyone -
Please read the info in this post, which is extremely helpful if you (like me) need to revert back to iTunes 6.0.5. Your problem sounds quite similar to mine - I went back to what worked before. This will put you back to where you before this disaster called iTunes 7 happened:
http://discussions.apple.com/thread.jspa?messageID=3096525&#3096525
Good luck.

My ipad still shows message "connect to itunes" even after restoring/updating through itunes

my Ipad is showing on screen "connect to itunes" and as per instruction i tried to restore it Through I tunes, however even after downloading Software and installing it on ipad it is still showing the same message "connect to itunes" ,please help.

Did you restore from a prior back up or restore as new?

After restoring my iphone , itune will say,could not restore because iphone was disconnected? what does that mean?

Got a new iphone and needed to transfer my music from my ipod to the iphone. I did a back up on ther ipod and restored it to the iphoneI got 2 messeges:
1. itune could not restore the iphone because the iphone disconnected.
2. The phone cannot be syned. An internal device error occured.
Can anyone help me?

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

HT201210 after restoring ipad2 it ask for a PUK code what do i do?

how do iunlock a ipad after i restore it?

It it is a 5G iPod with iOS 7 and it then asks to enter the Apple ID and Passcode of the previosu owner you have to do that or return the iPod for a refund
iCloud: Find My iPhone Activation Lock in iOS 7
Find My iPhone Activation Lock: Removing a device from a previous owner’s account

HT201412 after restoring ipad2 in itunes it doesn't continue. HELP!!

Similar Messages

Maybe you are looking for