Regarding Navigation Cache

Hi All,
Can anybody have implemented custom navigation connector to resolve the issue with navigation cache. Here we are facing the issue with Navigation Cache when we are using PCD filters, there is a conflict when we use both.
What I am trying to do is I want to implement one custom navigation connector from that code I want to disable the cache for groups or roles coming under PCD filter. Can anybody please let me know is there any possibilities to do like that? if yes, could you please guide me how to proceed? I have gone through the below links but I did not get any help with those.
1) Be Careful When Combining Navigation Cache, PCD Filter
2) http://help.sap.com/saphelp_nw70/helpdata/en/42/fd19d73b676fb4e10000000a11466f/content.htm
Regards
Suresh

Hi,
To optimize the report performance we will use it. see
http://help.sap.com/saphelp_nw2004s/helpdata/EN/41/b987eb1443534ba78a793f4beed9d5/content.htm
Thanks
Reddy

Similar Messages

Error in the Navigation Cache after deleting user

Hi,
We have an issue with the navigation cache and deleted users. If we delete a user and then tries to log on with a user with the same set of roles as the deleted user, the navigation cache throws an exception
User USER.PRIVATE_DATASOURCE.un:z_deleteduser doesn't exist!.
There is no relation between z_deleteduser and the user we logged on with when getting the exception.
My guess is that the deleted user was the first user with that set of roles that logged in after last time we cleared the cache, and therefore got used as a key to that particular navigation object.
Does anyone know how to resolve this, I don't want to empty the cache each time we delete a user?
Regards
Mattias

Hi,
It seems the guided procedure throws the same exception, which makes sense. I don't have a WAS up and running here, so I can't test, but I guess it's the exception the UME throws if you try to access an non existing user, and it just gets propagated both by the Navigation Cache and Guided Procedures.
But there has to be a fix for it, somewhere...
Regards
Mattias

Navigation is cached - even when navigation cache is disabled?!

I seem to have a problem clearing the navigation cache. Whenever I change a role of workset in the PCD, the change is not visible until some time has passed (perhaps 100 minutes, I will try to verify that).
If I change a page (like inserting a new iView) the change is visible immediatly.
This sounds like a fairly standard "flush the navigation cache" problem, but that does not solve the problem. I have disabled all the caches in "System Administration -> Navigation -> Navigation cache" and have also cleared all of them just for good measure.
I have used Firebug in firefox to verify that this is not a browser cache problem. For example I have a folder in the role that contains two pages. I add a third page, flush all browser caches, close the browser and reload the page. In firebug I can see that I get a "200 OK" response that only includes the original two pages - not the new third page.
I have also tried clearing the PCD cache in "System Administration -> Support -> Portal Content Directory -> PCD Administration -> Release cache". When I do that I can see (again with firebug) that the request is taking slightly longer the first time (around 300ms instead of the usual ~70ms). However, the new page is still not visible.
The only thing that help (besides waiting) is to restart the entire portal. The changes are then visible immediatly.
I have even tried clearing the HTTP cache, which also does not help.
What other caches could there be besides the navigation cache, the PCD cache, the HTTP cache or the browser cache? How can I debug this problem further?
Thanks in advance.
Best regards,
Ole Hyldahl Tolshave
P.S. We use SEP EP 7.00 SP21
Edited by: Ole Hyldahl Tolshave on Jun 17, 2010 10:21 AM

Hi Tobias,
I tried clearing the DB cache (by using /irj/servlet/prt/portal/prtroot/com.sap.portal.prt.cache.PRTRegionDBClear). No change (change to role is still being cached).
I used the PCD Inspector and verified that the contents are identical to what I see in Content Administration -> Portal Content (which is different from what is rendered in the top navigation and detailed navigation).
We only have one server node running.
I tried deploying the .PAR-file from SAP support (and restarted). This made no changes so now I am waiting for them to get back to me.
But thank you again for trying to help.
Best regards,
Ole Hyldahl Tolshave

Caching on detailed navigation besides navigation cache?

Hello Everyone,
We use Btexx EasyWCM as a content management system on our SAP NW portal.
When we create a new page in the portal it should appear directly in the detailed navigation, but instead it appears much much later, often after more then an hour. The same happens when deleting a page.
We thought of navigation cache at first but we disabled it and the problem was still there.
Because the new page does appear after a while, what makes it time-based, we still think it might be a caching issue. We don't know what other caches influence the detailed navigation.
The page does appear in the PCD (role) directly after it is made, same goes for deletion.
We tried a restart already, but that didn't resolve anything. And I donu2019t think it's a network problem because the PCD updates instantly. Just the detailed navigation doesn't. Even when we changed the customised detailed navigation back to the standard SAP detailed navigation there was no difference.
We tried creating a page directly on the server so the caches of the proxy's etc could be excluded and the problem was still there.
Thanks.

Hello Sander,
that's good to hear. But you do not need not turn the navigation cache off.
easyWCM supports the new Navigation Cache API. If a editor changes navigation structures, easyWCM automatically invalidates the relevant roles from the cache.
Please check if your SAP Portal release and easyWCM release supports that feature.
More information are available on our support plattform:
http://www.btexx.de/support/
Best regards,
Michael

How to clear portal navigation cache

hi
How to clear portal navigation cache

Hi,
Refer this link
http://help.sap.com/saphelp_nw04/helpdata/en/a2/19edcf16474a9798a5681ce4fe4b25/frameset.htm
EFP: Navigation Caching
Regards,
Senthil K.
[points welcome]

Installed Portal Add ON / FORUM / Systemadministration - Navigation Cache?!

Hi,
i installed the Add ON FORUM for our Portal.
I ve restarted the whole Portal after that.. now the Menupoint:
Navigation Cache under System Administration - Detailed Navigation is gone?
I only see there: Short URLs... before i installed the FORUM Component there was over "Short URLs" The Point:
Navigation Cache...?!
Did anybody knows whats happened there? How can i clear now the Navigation cache?
Please help.
regards
Bjoern

Hi,
i searched the whole system but its lost?!?!
Is there another methode to clear the Navigation Cache? Or did anybody else faced the same problem in the past?
Regards

Navigation cache problem

Hi All
While clearing the navigation cache from Portal - System admin , i,m getting the following error :
java.lang.reflect.InvocationTargetException occurred: null . kindly help.

Hi Rahul,
By default the navigation cache is turned off. So check the property portal.navigation.cache.enable which should be true for the navigation cache to work.
You can check it in Visual administrator in com.sap.portal.prt.sapj2ee under services
Regards,
Gourav.

Navigation Cache - Object Size

We're currently in the middle of our upgrade to SP15 and one of the new features we're implementing is the navigation cache. By default, the number of objects to be cached is set at 5000. So far the behavior is, all the navigation objects (pages) counts as objects. Then for each user entering the portal with an unique role combination, an additional set of objects (equaling the number of roles they have) is also added. In our dev environment where most users are superadmins, we're at around 1300 objects.
My question is what's an object limit before there's going to be a performance hit with too much memory usage. Is 5000 a safe limit? Or can it be higher? What happens if the object limit is reached, will it be like a queue where the oldest cached object gets deleted when a new one is added?
Any info on this subject is welcome. Any experiences with high availability environments using navigation cache would be appreciated. Thanks

Hi,
The Preliminary objective of Navigation Cache is to improve performance on the server-side. By saving the Navigation Nodes in memory, the number of calls to the PCD or any other backend systems is reduced.
The cache is implemented in a First in - First out manner (FIFO).
Try this link for more information:
http://help.sap.com/saphelp_erp2005/helpdata/en/5f/2720a513ea4ce9a5a4e5d285a1c09c/frameset.htm
Hope it's help
Best Regards,
Shimon.

Navigation Cache - PCD

Hello All,
I need to enable the Navigation Cache in the portal , On System Administration --> Navigation . Currently the Navigation cached for Roles are disabled , When I select click 'Enable', It still shows as 'Disable' , even if I log-off and log-in again.
Can anyone please suggest what might be the resolution for the same ?
Regards,
Ronniee.

Hi,
Check this below link
http://help.sap.com/saphelp_nw04/helpdata/en/a2/19edcf16474a9798a5681ce4fe4b25/content.htm
Regards,
Srinivasan

Navigation Cache - Loading Web Dynpro iview

Hello Experts,
I developed a simple WebDynpro that count the access number to a single portal page.
And I put it in a Role.
In a cluster environment I had different results depending on the cluster instance I use.
If I do a Logon in the central instance and navigate the role I get a value of access number.
If I do a Logon in the dialog instance and navigate the role I get a different value of access number.
The value in the database is always the same..
Could it be a cache problem??
What can I do??
Best Regards

Hi,
Did you try clearing the navigational cache on dialog server and also in Central Instance?
In Portal Navigate to System Administration - Navigation - Clear Navigation Cache.
And test the application again and see if it got resolved...
Or
Go to Index.html side and go to Web Dynpro Tools, and go to Invalidation of ARFC Metadata Cache - In section Dictionaries Cache Invalidation - click on the button to get teh application using the JCO connection and invalidate the cache...
Hope this helps.
Cheers-
Pramod

Page navigation cache delete on back navigation

Hi,
Building a Universal WinRT app.
Is there any way to delete a pages navigation cache when a user navigates backwards via the WP back button?
e.g. page saves state when user follows link in that page and returns to it. However if a user navigates away from the page using the back button and then returns to it then no state is saved and it reloads
Thanks!

Hi,
Please see this:
NavigationCacheMode enumeration
The NavigationCacheMode enumeration has these members.
Member
Value
Description
Disabled
0
The page is never cached and a new instance of the page is created on each visit.
Required
1
The page is cached and the cached instance is reused for every visit regardless of the cache size for the frame.
Enabled
2
The page is cached, but the cached instance is discarded when the size of the cache for the frame is exceeded.
As your description, you should set the Page’s NavigationCacheMode to Disabled
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

How to guarantee that all events regarding Data Cache are dispatched when application is terminating? Urgent

Hello,
we have the phenomena that when an application is commiting a transaction and then terminating,
often not all events regarding Data Cache are dispatched by the TCP kodo.RemoteCommitProvider.
It seems that the JVM on termination is not waiting until RemoteCommitProvider has dispatched all events regarding Data
Cache. In this way we sometimes loose some cache synchronization and some of our customers run into serious problems.
Is there a way to guarantee that all Data Cache events are dispatched before the aplciation terminates
(maybe implementing a shutdown hook?).
best regards
Guenther Demetz
Wuerth-Phoenix SRL

Hi,
as nobody answered to my question I try to explain it more simple:
Are the TCP-kodo.RemoteCommitProvider threads acting as user threads or as threads of type 'deamon' ?
I hope that soon someon can answer
best regards
Guenther Demetz
Wuerth-Phoenix SRL
G.Demetz wrote:
Hello,
we have the phenomena that when an application is commiting a transaction and then terminating,
often not all events regarding Data Cache are dispatched by the TCP kodo.RemoteCommitProvider.
It seems that the JVM on termination is not waiting until RemoteCommitProvider has dispatched all events regarding Data
Cache. In this way we sometimes loose some cache synchronization and some of our customers run into serious problems.
Is there a way to guarantee that all Data Cache events are dispatched before the aplciation terminates
(maybe implementing a shutdown hook?).
best regards
Guenther Demetz
Wuerth-Phoenix SRL

Navigation cache

Hi all,
I read that enabling navigation cache improves portal performance.
My question is this: If i enable/disable navigation cache, or modifying any of it's properties in visual administrator - does the portal need to be restarted or the changes take effect immediately?
Also, the properties come with default values: 100 for cache lifetime, and 5000 for number of objects. Are those values the recommended values to use? what should i take into consideration when giving values to these properties?
Thanks,
Moti.

Hi Moti,
If you make changes to the properties in the Visual Admin you will need a restart of the J2EE.
When setting the timeout of the cache it is important to consider the number of navigation object which you are displaying and also the frequency with which they may change. The good thing about the navigation is, that it should not change that often for a particular user. So the default timeouts of the navigation cache are not quite as critical as those for something like a content cache.
Besides, a System Administrator can always clear the cache manually, anytime anyway.
Rgds,
Marc

Regarding Navigation in obiee 11g

Hi All,
i have recently migrated from obiee 10g to 11g.
after migration the naviagation is not working.
i have implemented navigation in 10 g in which on clicking one report it naviagate to another report also drilling down.
but in 11g it is not happening.
please help me to solve this problem.

Please check the navigation is given properly or not.
Just move to the criteria of the request and click required column by which you want to navigate. In the column properties of the request there is option naming INTERACTION in that option you will find "Add action link"-> BI content and then just select required request or the required dashboard page. it will navigate on it.
Regards,
Diney

Question regarding palcing cache related classes into a package

Hi all,
I have a question regarding placing classes into packages. Actually I am writing cache feature which caches the results which were evaluated previously. Since it is a cache, I don't want to expose it outside because it is only for internal purpose. I have 10 classes related to this cache feature. All of them are used by cache manager (the manager class which manages cache) only. So I thought it would make sense if I keep all the classes into a separate package.
But the problem I have is, since the cache related classes are not exposed outside so I can't make them public. If they are not public I can't access them in the other packages of my code. I can't either make it public or private. Can someone suggest a solution for my problem?

haki2 wrote:
But the problem I have is, since the cache related classes are not exposed outside so I can't make them public. If they are not public I can't access them in the other packages of my code.Well, you shouldn't access them in your non-cache code.
As far as I understand, the only class that other code needs to access is the cache manager. That one must be public. All other classes can be package-private (a.k.a default access). This way they can access each other and the cache manager can access them, but other code can't.

Regarding Navigation Cache

Similar Messages

Maybe you are looking for