Regarding Output in Two pages
hi all,
I developed Check Printing Form. Output is coming but that is coming in second page. First Page is contain only one line.
I was not defined next page also. But data is coming in next page.
What will be the problem.
Please suggest.
Regards
Reddy
Hi ramreddy,
Go to the conditions tab on the pages and windows in case you have check the checkbox Not on the first page
if it so then uncheck the checkbox as per requirement the data will be printed on the first page
Regards,
Sravanthi
Similar Messages
-
Regarding incorporate the two page nations in the same JSP page
Hi folks,
i am unable to do two page nations in the same JSP page using paging tag libray,I am getting the follwoing problem while setting the offset value to the Pager.offset.
I have written the code like this.
<pg:pager items="<%=size%>" export="sreenyOffset=offset, currentPageNumber=pageNumber;" isOffset="true" scope="request">
<pg:index export="totalItems=itemCount">
<% System.out.println("Before currentPageNumber:"+currentPageNumber); %>
<table width="100%" border="0" align="center" cellpadding="0" cellspacing="0" nowrap>
<tr class="pagenation" >
<td width="1%"> <br><br></td>
<td width="40%" align="left">
<pg:page export="firstItem, lastItem">Displaying results <strong><%= firstItem %>-<%= lastItem %></strong> of <strong><%= totalItems %></strong> found</pg:page></td>
<td width=20%></td>
<pg:prev export="pageUrl,firstItem" >
<td width="5%" align="right" height="22">
<a href="javascript:submitSearchForm(document.organizationForm,'<%= firstItem %>')"><b>Previous</b></a></td>
</pg:prev>
<pg:pages export="pageUrl,firstItem,pageNumber">
<%
System.out.println("pageNumber :"+pageNumber+"^currentPageNumber:"+currentPageNumber);
%>
<% if (pageNumber == currentPageNumber) { %>
<td width="2%" align="right" height="22"><font color=#FFFFFF><%= pageNumber %></font></td>
<% } else { %>
<td width="2%" align="right" height="22">
<a href="javascript:submitSearchForm(document.organizationForm,'<%= firstItem %>')"><font color=#415481> <%= pageNumber %> <font></a>
</td>
<% } %>
</pg:pages>
<pg:next export="pageUrl,firstItem" ifnull="<%= true %>">
<% if (pageUrl != null) { %>
<td width="5%" align="right" height="22">
<a href="javascript:submitSearchForm(document.organizationForm,'<%= firstItem %>')"><b>Next</b></a></td>
<% } %>
</pg:next>
</tr>
</table>
</pg:index>
<html:hidden property="offset" value="0"/>
<html:hidden property="pager.sreenyOffset" value="0"/>
</pg:pager>
I need some clarification for following things.
1)i have given the export like this
export="sreenyOffset=offset, currentPageNumber=pageNumber;"
but while setting the offest for pager, i am doing like this
<html:hidden property="pager.sreenyOffset" value="0"/>
can i customize the pager.offset to pager.(someting) like that.
2)if i use pager.offset for two page nations in the same page pager.offset value is overriding,So i am unable to maintian the page nations.
3)i can change the offset value into sreenyoffset in the export property of pager tag,if iam able to change the pager.offset value to customized value my problem will solve.
4)
can i declare the export property like this.
<pg:pager items="<%=size%>" export="sreenyOffset=offset, currentPageNumber=pageNumber;" isOffset="true" scope="request">
Please give me your valuable suggestions,it will be very helpful to me.
Also give me some suggestions how to do the two page nations in the same page.I am desperately waiting for response.
Thanks & Regards,
Sreeny Reddy.Hi,
I was trying the pagination concept in jsp. I am getting a lot of errors. Can u help me for displaying this pagination.i need to display dynamic records according to search criteria. In search criteria, an area is selected and the data related to that area should be displayed from a table in mysql . It has 100+ records each
with 6 columns, each page should be displaying 10 records, what we call pagination. I was trying this(in java jsp)( should not do in struts, should be done only in jsp) for a long time. By ur faq, i understood u hava already done it. Pls try to help me. Can u pls send me a sample program regarding this?
I would be very grateful if u help me.
thanks in advance,
regards,
mv. -
How to display two pages at a time in smartform
Hi folks,
I have requirement that i need to display two pages for each record of the output table . the page 1 is not simillar to page 2 . page1 contains few templates and page2 contains other templates not simillar to first one.
my case, it displays only the first page eventhough i tried using command line.
Is there any exact step to followed to over come this problem.
Please suggest the solution.
Thanks ,
Hemum.hi,
can u please tell me how and where u are looping throuhg the internal table
check that.
regards,
Ravi Valluri -
Junk Characters on first two pages of Cheque Printing SAP Script.
Hi All
I implementing cheque printing for one of our client's Oman based subsidiary. I have copied the standard SAP Script F110_PRENUM_CHCK into a Z-Form and maintained its original language as EN. I have commented out all the unnecessary peices of information in all the windows and customised as per my requirement.
Now the problem that i am facing is that when i execute this script through the standard driver program RFFOUS_C, i am getting junk characters on first two pages of the script. The info displayed comes in the HEADER and MAIN Windows. The desired output is coming in the 3rd, 4th and 5th pages.
Please let me know how should i get rid of these junk characters.
Regards
Harsh
PS: All info printed is in English only.Hi
Thanks for your response.
Yes, the remittance advice header info is getting printed in the HEADER Window and its contents in the tabular structure are in the MAIN Window.
I am passing EN as the language.
Adding to this, the report RFFOUS_C gets executed and i am checking the spool that is created which has the junk characters on the first two pages.
Regards
Harsh -
Remove First Two Pages of Print from ALV
Dear All,
I am trying to give a print of standard ALV report <b>BCALV_GRID_VERIFY</b>. When I give a print of the Output ALV Grid using the Icon on the ALV toolbar. I get two more pages with Print Parameters and the total count.
Could someone tell me how to remove the first two pages before I get the actual print. Everytime I give a Print I get these two pages so it budget issue wasting everytime two pages for a single page print even.
Thanks & Regards,
JJ.Hi Joseph,
in my case these are the settings...
Just change your spool settings also ..
in my case
SAP Cover Page System Administrator: Default Settings
OS Covert Sheet System Administrator: Default Settings
ALV statastics NO
i think for your case ALV statastics is markes as YES is it true.
Can you change the settings.
Regards
Vijay -
How to display the first page alone first and two pages (back and front) then ?
Hi
I use acrobat 9 (beginner).
I have a document which should be displayed "as a book", ie two pages on the screen at the same time, the back of the first sheet and the front of the second one.
The problem I have is to manage to display the cover sheet as a single page (alone) and then to have the dual page layout as described above.
How could I do that ?
Thanks for your help
Regards
FanchHi Bernd
Thanks a lot. -
CS 5 exports two pages at a time instead of one.
I copied the following script from the Internet into notepad, saved it, and renamed it "spreads.jsx". I put it into my scripts file. It didn't do anything. app.interactivePDFExportPreferences.exportReaderSpreads = !app.interactivePDFExportPreferences.exportReaderSpreads
I removed the facing pages check. My pages still exported two pages to a page. I then created a new document without the facing pages checked. I copied the 21 of my original file into the new file. It still exported two pages on one.
>The only way to get non-facing pages to stick together is to disable page shuffling and drag them together in the Pages Panel, and that
won't happen accidentally.
I turned off shuffling, and that didn't help either. It was unclear what to drag in the Pages Panel.
I'm now past my deadline for the newsletter and can use anybody's help so that I get an output in .pdf for single pages, so people can print out the file and have a single page on a single sheet.
Lou
First, here is my screen shot of the resulting .pdf file from exporting my 21 page document
Second, here is the screen shot of my pages panel.
Next, the export dialogue:
Here is the scripts dialogue box.Someone, maybe you, suggested I start a new thread about the video. I
posted it to the forum under:
"I solved the export single page issue and now my videos won't work." Here
is the text:
I have windows 7 for 64 bit.
I ran a script on my InDesign CS 5 document to solve the problem with two
pages appearing on one .pdf file. When I clicked on it, here is what I
get “Spreads are now ON in Interactive PDF Preferences.”
I get two pages stuck together in my interactive .pdf file. I don’t want
that because it prints to pages on a single sheet and I want each page to
print separately. However, my three .f4v videos appear the way I want and run
perfectly, even though I got the error message, “One or more interactive
elements are clipped in ways that PDF files cannot reproduce. Those elements
will be adjusted in the exported PDF. “
When I click on the script again, it says, “Spreads are now OFF in
Interactive PDF Preferences.”
The pages are the way I want. Now my videos don’t behave. Video 1 vanished
into a red border with blank inside. Video 2 has moved half way up the
page, covering two photos, but it plays. Video 3 has just white space in its
position.
Next, I tried another script. When I ran it I got the message, “Shuffling
pages will remove some page transitions. To avoid this message in the
future, uncheck allow Document Pages to Shuffle in the Pages panel. Select OK to
continue.” I hit okay several times and the message kept appearing again
and again. I finally clicked “Don’t show again” and it went away. I got the
same error message as before. The videos are all screwed up, like before.
I toggled that script and exported again, and got the same error message.
This time, as before, the videos were messed up, but this time one of the
videos was off the page, but played.
Is there any way I can keep one page to one in the .pdf AND have my videos
work?
Lou
In a message dated 6/27/2011 7:39:51 A.M. US Mountain Standard Time,
[email protected] writes:
Lou,
In order to properly diagnose your problem it is ESSENTIAL that ID is
behaving in a known and predictable way. This means that if you ran the
first script, the one that Stix recommended, and ran it only once and then
deleted it, you MUST reinstall the script, and run it again to reset the
export behavior to spreads so we know what's going on. You should see a
new
dialog telling you that exporting spreads is active when the script runs.
Until you do that, we really can't tell where the problems with things
moving might be coming from.
I design for print, and I've been working with InDesign since it was first
released, switching my production work from Quark Xpress to InDesign when
ID
2.0 was released about 10 years ago. Before going freelance as a designer
I
worked a few years in print shops learning from other people's mistakes
(and
learning how to fix most of them), and did some newspaper and magazine
production. Quite a bit of what I know about InDesign I've actually
learned
here. For the first few years I read every post, and if I didn't already
know the answer I tried to figure it out. Even now, though, I usually
learn
something new at least once a week.
As I just mentioned, I design for print, so the interactive stuff is a bit
murky for me, too, but if we can get you to a known state and see if
things
are where they belong, someone who does interactives all the time may be
able to help more. I don't know about the warning you get, but I suspect
it
is significant. -
Some Two-page Spreads export to PDF/Blurb with Errors
Hi,
I have created a Blurb book in default portrait format.
Some of the two page spreads (sample: first two images in portrait format, third image squared on the top right) do not export correctly. The second image, the one, which will be on both pages, will be slightly smaller on the left page, than on the right page (both on Blurb and PDF export). Sadly, those two page spreads are useless for now
LR4 release versions, no updates available as of now.
Took me just three hours to upload the book and see those same errors in the Blurb preview :/
Regards,
DanielYou can use a multipage importer to import a single Page PDF into InDesign.
Create a single page PDF
Create a facing pages document the same size as your original file
Multi-page place the entire pdf into facing pages (automatically done by script)
Export entire book to PDF as spreads.
http://indesignsecrets.com/zanelli-releases-multipageimporter-for-importing-both-pdf-and-i ndd-files.php
I say to do this with a singe pages PDF - because I don't think it will import multiple InDesign files, you'd have to place them individually - and with my experience it takes longer to import multiple indesign files - so I just use a single pages PDF. -
How to keep the filtered output in a page after user navigates back?
How to keep the filtered output in a page after user navigates back to all records from another page.
Currently it clears the searchHi,
user13091824 wrote:
How to keep the filtered output in a page after user navigates back to all records from another page.
Currently it clears the search---While returing from page AM Return status should be True in pageContext.setForwardURL.:::
pageContext.setForwardURL("OA.jsp?page=/XXX/oracle/apps/po/msg/webui/SearchPG",
"SUPP_SEARCH",
OAWebBeanConstants.GUESS_MENU_CONTEXT,
null,
null,
true, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
OAWebBeanConstants.IGNORE_MESSAGES);
---After setting AM Status to true u can able to c the values.
Regards
Meher Irk -
Report, Make a linkage group for two pages each page has a Repeating frame
I Have two pages. And each page have a repeating frame inside a main frame.
And two pages have a relational data. So, I should to make a linkage group for this two page.
In my case,
PAGE 1.
*M_1 Main frame start
R_1 Repeating Frame start
Personal Data Part 1.
R_1 Repeating Frame end
*M_1 Main Frame end
PAGE 2.
*M_2
R_2
Personal Data Part 2.
R_2
*M_2
If there are 3 peoples information, Repeating frame will display continuously.
In my case,
page 1
page 1
page 1
page 2
page 2
page 2
But I want to do the following.
Page 1. -- 1st person's data
Page 2.
Page 1. -- 2nd person's
Page 2.
Page 1. -- 3rd.
Page 2. so on...
I need your help.
please let me know how to solve this problem.Hi,
i have a question related to this.
i am making a report in a similar pattern:
*M_1 Main frame start
R_1 Repeating Frame start
Data Part 1.
R_2 Repeating Frame start
Data Part 2.
R_2 Repeating Frame end
R_1 Repeating Frame end
*M_1 Main Frame end
Now the problem is that whenever there are multiple occurences of data in R_2, the data Part 1 is also printed that many times, whereas i want to show this just once.
Is there any way to do this?
Regards,
Swati -
Report Header split across two pages in preview
Hi there,
I've got a full page of A4 text as my report header which works fine in the Design view. However, in preview it splits across two pages leaving about a quarter at the bottom of the first page blank. The text should easily fit on one side of A4 - any ideas why it's being split?
ThanksHi
Ideally if you have inserted a cross tab on the report header, then it might split into more than one page.
Please ensure that you have not put a cross tab on the report header. You can also switch to Landscape and check if it fits the report header in one page.
Hope it helps.
Regards
Sourashree Ghosh -
How can add two page report in Crystal Report
Hi experts
I want to make a two page report. for example First page is invoice and second page contain some legel information that Fix.
Regards
GorgeHi Ance,
yes you can do it , Suppose you want to call the second opage at the end of page footer or at the end of report (every page in crystal have section ), make the formula on that section aftyer which u want to call the second page . in formula mention rhe condition like if page no =1 then call second page or call page break that depends on u .
Hope u got some idea ,moreever pls let me know u want the page break after end of report or page fotter .
Rgds,
Premraj -
Inserting a two page TIFF file into Report Builder 10.1.2.2.0
Hello all!
I am trying to create a report which uses a pre-printed form. I went to the paper layout view and inserted my TIFF file, however only the first page is used. This is a two page file. How can I use both pages in my report?
Thanks!Can you open any other rdf?
We had quite a few crashes with the Report Builder on Windows 7, especially when using graphs in rdfs. Setting the compatibility of the shortcut to "Windows Vista" solved most of our problems.
Regards
Markus -
Same table content in two page...
Hi frends in Adobe forms i have two body page..i want to display same table in two page....while iam trying this issue...
i got table content displayed in one page but in the second page table content is not displaying..i think i have some problem in binding...help me out......Hi Dinesh,
If u r binding the data to the table in the first page, u can not bind that data again to the other table. Because u can bind the data only once. Next time it ll be empty.
For this u should hv two table in ur context.. eg: *table1* (1:n) and *table2* (1:n) with same attributes.
Then in the code *fetch the data -> set attributes -> bind with table1 node*..
then, set_attrubutes for table2 -> bind table2
Regards,
*Surya*
Edited by: Surya PK on Oct 2, 2009 4:21 AM -
Printing two pages per sheet of paper
I have a newsletter that is 24 pages long. Each page is 7"h X 8 1/2"w. I print on 8 1/2 X 14 size paper.
In Microsoft Publisher the software would set the layout so that the output was properly ordered. For example the front cover and the back cover printed on the same sheet, and page 2 (inside of the front cover) printed on the same sheet as page 23 (inside of the back cover).
I can't figure out how to do this in Pages. Any thoughts? Thanks.
MikeMike,
When you make a booklet you start with a vertical (letter or legal size) page. CocoaBooklet then reduces the pages and turns them side-ways and pairs them appropriately to form a booklet. A legal (14") size page will reduce to fit the 8.5 X 5.5 booklet page size (one letter size sheet side-ways and folded).
Remember, you have to start with a page that is vertical to fit the reduced side-ways page of the booklet and you lay out one page at time, not two pages on one horizontal legal size. I can't find a standard size that will reduce (approx 60%) to fit an 8.5 x 7 in. booklet. Your best bet may be to redesign your newsletter to the smaller width. Then CocoaBooklet should give you what you want. (You have to make your original page over-sized.)
If that is not what you want to do, then I suggest taking blank legal size paper and making a dummy. Assemble the number of sheets you want the finished product to be (6 sheets for 24 pages) and number them. Then disassemble them and you can see what pages must be together on each single sheet. Layout your newsletter accordingly at actual size.
Hope this helps.
Walt
Maybe you are looking for
-
Windows 8 64-bit, failed installations and RAID 1 resync on HP ENVY h8-1520z
I recently purchased an HP Envy h8-1520z with a single SSD and 8 GB RAM running Windows 8 Pro 64-bit. I installed 2 Western Digital 500 GB WDC WD5000AAKX-001CA0 HDDs on SATA ports 5 & 6 and configured them as RAID 1 in the BIOS. I have started inst
-
Reading only Image Files from a Directory and ignoring the rest
i am wanting to be able to read a directory but only obtain the Image files (ie, gif, jpeg, tiff, png etc) and ignore all other type of files. i have made a custom ImageFIlter class which extends FileFilter which works for adding a photo singly, as o
-
Software Protection Serive Stops running
Hi I am having an issue with the "Software Protection Service" on a number of our Windows 2012 R2 RDS Servers Basically the following happens, after a reboot the service fails to start with a Timeout error (A timeout was reached (30000 milliseconds)
-
Onomat03 could not be found error
Last time my wife opened itunes it said new software was available for her ipod (newest generation nano). She clicked okay to install it....things seemed to be working fine but now it's showing an error saying "onomat03[1] was not copied to the ipod
-
Hi!! Where can I found a documentation or any documents explaining concepts ....examples of headstart!!! Thanks!