Regarding SID table for Texts

Hi,
Do we have a SID table for text as we have for characteristics, attributes and hierarchy ?
Regards,
Sunitha

Hi,
Master data and Hierarchy have the SID tables but for text we do not have any SID table.
Regards,
rik

Similar Messages

Deleted and adjusted the Master data table, sid table and text table

Deleted and adjusted the master data table, sid table and text table of an zinfoobject after removing and adding attributes to that zinfoobject and was trying to activate it and system was giving me messages that cannot activate infoobject something like this.
So, i deleted and adjusted the master data table, sid table and text table. Since then getting messages right after executing the query because in that query that infoobject is getting used.
So the messages i am getting is:
SID 9 for characteristic Zinfoobject could not be converted CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2
System error in program SAPLRRK0 and form MEGA_SORT_M_02-02- (see long text)
Please help me in fixing this whole thing.
Thanks
SAPBW

SAP BW,
After adjusting your Master Data IOBJ and deleting and reloading the data - run a change run to adjust the references to the SIDs and then see if your query runs - run program RSDDS_AGGREGATES_MAINTAIN from se38 and select your IOBJ in the next screen..
Arun
Assign points if useful
P.S I did notice that in your earlier post for the same topic - you have had 12 answers / suggestions Please maintain only one thread as previously suggested..
My 0.02
Message was edited by:
Arun Varadarajan

Adjusting the SID table for master data infoobject

Hai
Im trying to activate one master data infoobject. But it says the error like below
<b>The SID Table /BI0/SBBP_DELREF must be converted incompatibly with an activation of characteristic 0BBP_DELREF (changes to the key in the table). Table /BI0/SBBP_DELREF contains data. Parts of this data were lost in the conversion</b>.
or
<b>Undo the changes that led to the incompatible conversion (the changes in the key) or delete all data from table /BI0/SBBP_DELREF.</b>
So how can i adjust the SID table for this .
pls tell me
kumar

Hi,
you'll have to delete ALL the master data for this IObj. Therfore you'll have to
delete all data in ALL the IObjs using 0BBP_DELREF (ODS, CUbes and characteristics).
Then activate your IObj. You will go through some step which I explained in the
following thread
Re: Urgent...Company Code lenght has been changed
Extract:
1. Delete 0COMP_CODE master data.
- get objects list using 0COMP_CODE with loaded data: I suggest to delete
master data via AWB (right click the characteristic). If it can't be deleted because
it is used display the deletion log (via AWB or tx SLG1 / RSDMD, MD_DEL).
- delete loaded data for the list above.
This should not be too much since you are in DEV.
2. change 0COMP_CODE length
- change the length to 4;
*- Activate your IObj. You'll get a popup log, validate. Activate despite warning and
errors. You will get An error message, validate.
You should get an horizontal pane with the activation log. Read it for your personal culture but if you don't have time then don't...
- Next the system will prompt to convert the tables: answer YES. The system will ask to schedule the table conv. in the background, go4it.
- next is the SE14 screen for the P table: Hit Activate and adjust (Direct
execution, or in the back as you wish). Answer yes to the mass processing
question and yes (again) for request adjust online. Your table should be converted successfully.
- go back twice from this screen (leaving SE14 tx and return to RSD1). reread the update log if you wish.
- repeat from the *- above... it will perform the very same for all other P tables of IObj using 0COMP_CODE and the 0COMP_CODE S table.
Your IObj is reactivated again. So should your ODS/DSO objects (check activate for example). Cube didn't need to convert tables since the MDID is note posted in any table of a cube.
Please note that once your IObj is in revised version you can perform the same via the menu extras / database table / convert all (see my previous post).
Now you have to evaluate the task. Of course that is a work to fix the mistake.
Depending on when it has be changed it may be worth to restore your DEV sys with a backup (loose work performed from the backup until now).
hope this helps... otherwise, revert.
Olivier.

No records in SID table for 0matl_group

After loading new data for 0matl_group the records doesn't appear in the SID table, we decided to check and fix it with RSRV transaction, the records now appear in the SID table but all the flags are unchecked as result of this only texts for 0material are loaded not attributes.
Thanks in advance.

I had this problem too. There seems to be a bug that sometimes doesn't add SIDs when only texts are loaded. If you have a reproduceable example you should open an OSS message. And if SAP supplies a fix and you'll find the time to send me the notes number I'd be really glad.
Best regards
Dirk

Table for text elements and selection texts

Hi All,
In which DB table does SAP stores program name and corresponding text-elements and selection texts used in that program.
There is a table D010TINF which just stores basic information but not the text elements number and name.
Thanks in advance.
Regards,
Atish

hi,
table name - RS38M (take se11 and give this, u can confirm)
field name - STEXTT
rgds
anver
if hlped pls rwrd points

R/3 Table for Text Descr of ORD43 (Tax Type) of ANLA (Asset Master) table ?

Hi all,
   I want to find the table name from which we get the Text Description for ORD43 ( Tax Type - Exemption Certificate no) of ANLA (Asset Master) table in R/3.
   In R/3, we could see that description, next to 'Tax Type - Exemption' (on the right side) with Tcode AS03 (Display Asset : Master Data) under 'Reporting' tab
   The InfoObject in BW for the same ORD43 is 0EVALGROUP3 which is an attribute of 0ASSET and InfoSource is 0ASSET_ATTR_TEXT.
   Which table has that description for ORD43, PLEASE ?
Thanks,
Venkat.

Hi Venkat,
My sincere apologies for the inconvenience regretted,
SO10 is a transaction where you maintain the texts and STXH is the table where you can find the description, if text maintained through SO10. Please check and let me know.
Regards,
Adhi.

Table for text at header and item level.

Hi gurus,
I have typed some text at the item level (Texts TAB for the item). In which table can i find this data. The table STXL does not contain the data thats been entered. Please help me with some information.
Regards,
Udaynath.

Uday,
UsE Function Module READ_TEXT or try with Table STXH..
Reward IF THIS HELPS..
Regds
MM

Table for Texts for Customs Documents - Relation to /SAPSLL/CUHD or ..CUIT

Hi Folks!
I am looking for the table where the text for customs declaration is stored in.
E.g. when you write a remark or other text within a customs export declaration (on the text-tab) - in which database table is this text stored and how is the relation to /SAPSLL/CUHD or on item leve to /SAPSLL/CUIT?
any help would be much appreciated.
Regards,
Ralf

Hi Ralf,
i have just used simple traced transaction and it leads to STXH and STXL tables.
TDOBJECT: SLL_CUHD_C
I believe function module reads/translated the texts.
But this is probably only a beginning of investigation.
Cheers,
Gabriel.

Regarding F4 help for text box in screen painter

i am passing 4 valus in data element values tab, it is passing correctly to the text box, if i am making the text box to ouput only then the values and button for pop up is not comming, what do i need to do if i need values for output only.

Hi Rocky,
I think u can try out this.
make ur textbox both input and output field and in PBO write
loop at screen.
if screen-fieldname = 'TEXTBOX'.
screen-input = 0.
endif.
endloop.
Regards.

Building index from multiple tables for text search

Hallo,
I had a look at how to build a index table to optimize search with Oracle text.
At the moment we are using a JOIN of tables to search for a text in several fields located in different tables.
My question is:
Is it possible to create that index table from several tables?
If yes, can you point me out to any links or give me an example.
So far, all the examples I read were about 1 table only.
Thanks
Elisabeth

The following is an extension of the original example. It uses ctx_ddl.sync_index to synchronize the index and shows the changes in one of the index tables and shows that the query finds the newly synchronized data. It also shows how this only happens when the column that the index is on is updated. In this example, the index is on the dummy column. The first update does not update the dummy column, so the ctx_ddl.sync_index command does not synchronize the new data. The second update does update the related dummy column, so ctx_ddl.sync_index does synchronize the new data. Lastly, I showed what happens to one of the index tables when you rebuild the index. Notice the reduction in rows in the index table after the rebuild process. You could also rebuild online or drop and recreate the index.
SCOTT@10gXE> DROP TABLE addresses
2 /
Table dropped.
SCOTT@10gXE> DROP TABLE customers
2 /
Table dropped.
SCOTT@10gXE> CREATE TABLE customers
2    (customer_id NUMBER,
3      first_name VARCHAR2(15),
4      last_name   VARCHAR2(15),
5      dummy         VARCHAR2(1),
6    CONSTRAINT   customers_pk PRIMARY KEY (customer_id))
7 /
Table created.
SCOTT@10gXE> CREATE TABLE addresses
2    (customer_id NUMBER,
3      street         VARCHAR2(15),
4      city         VARCHAR2(15),
5      state         VARCHAR2(2),
6    CONSTRAINT   addresses_fk FOREIGN KEY (customer_id)
7               REFERENCES customers (customer_id))
8 /
Table created.
SCOTT@10gXE> GRANT SELECT ON customers TO ctxsys
2 /
Grant succeeded.
SCOTT@10gXE> GRANT SELECT ON addresses TO ctxsys
2 /
Grant succeeded.
SCOTT@10gXE> CONNECT CTXSYS/ctxsys_password
Connected.
CTXSYS@10gXE>
CTXSYS@10gXE> CREATE OR REPLACE PROCEDURE concat_cols
2    (p_rowid IN     ROWID,
3      p_clob     IN OUT CLOB)
4 AS
5    v_clob            CLOB;
6 BEGIN
7    FOR c1 IN
8       (SELECT customer_id, first_name || ' ' || last_name AS data
9        FROM      scott.customers
10        WHERE ROWID = p_rowid)
11    LOOP
12       v_clob := v_clob || c1.data;
13       FOR c2 IN
14         (SELECT ' ' || street || ' ' || city || ' ' || state AS data
15          FROM   scott.addresses a
16          WHERE a.customer_id = c1.customer_id)
17       LOOP
18         v_clob := v_clob || c2.data;
19       END LOOP;
20    END LOOP;
21    p_clob := v_clob;
22 END concat_cols;
23 /
Procedure created.
CTXSYS@10gXE> SHOW ERRORS
No errors.
CTXSYS@10gXE> GRANT EXECUTE ON concat_cols TO scott
2 /
Grant succeeded.
CTXSYS@10gXE> CONNECT scott/tiger
Connected.
SCOTT@10gXE>
SCOTT@10gXE> EXEC CTX_DDL.DROP_PREFERENCE ('concat_cols_datastore')
PL/SQL procedure successfully completed.
SCOTT@10gXE> BEGIN
2    CTX_DDL.CREATE_PREFERENCE ('concat_cols_datastore', 'USER_DATASTORE');
3    CTX_DDL.SET_ATTRIBUTE ('concat_cols_datastore', 'PROCEDURE', 'ctxsys.concat_cols');
4 END;
5 /
PL/SQL procedure successfully completed.
SCOTT@10gXE> CREATE INDEX customer_text_idx ON customers (dummy)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS ('datastore concat_cols_datastore')
4 /
Index created.
SCOTT@10gXE> INSERT INTO customers VALUES (1, 'Bob', 'Smith', NULL)
2 /
1 row created.
SCOTT@10gXE> INSERT INTO addresses VALUES (1, 'Noplace', 'Nowhere', 'CA')
2 /
1 row created.
SCOTT@10gXE> INSERT INTO customers VALUES (2, 'Bob', 'Jones', NULL)
2 /
1 row created.
SCOTT@10gXE> INSERT INTO addresses VALUES (2, 'Smith St.', 'Somewhere', 'CA')
2 /
1 row created.
SCOTT@10gXE> EXEC CTX_DDL.SYNC_INDEX ('customer_text_idx')
PL/SQL procedure successfully completed.
SCOTT@10gXE> COLUMN   token_text FORMAT A30
SCOTT@10gXE> SELECT   token_text, token_type, token_first, token_last, token_count
2 FROM     dr$customer_text_idx$i
3 /
TOKEN_TEXT                     TOKEN_TYPE TOKEN_FIRST TOKEN_LAST TOKEN_COUNT
BOB                                     0           1          2           2
CA                                      0           1          2           2
JONES                                   0           2          2           1
NOPLACE                                 0           1          1           1
NOWHERE                                 0           1          1           1
SMITH                                   0           1          2           2
SOMEWHERE                               0           2          2           1
ST                                      0           2          2           1
8 rows selected.
SCOTT@10gXE> SELECT   c.first_name, c.last_name, a.street, a.city
2 FROM     customers c, addresses a
3 WHERE    c.customer_id = a.customer_id
4 AND      CONTAINS (C.dummy, 'Smith') > 0
5 /
FIRST_NAME      LAST_NAME       STREET          CITY
Bob             Smith           Noplace         Nowhere
Bob             Jones           Smith St.       Somewhere
SCOTT@10gXE> -- dummy is not updated, so the index is not synchronized:
SCOTT@10gXE> UPDATE   addresses
2 SET      city = 'Anywhere'
3 WHERE    city = 'Somewhere'
4 /
1 row updated.
SCOTT@10gXE> EXEC CTX_DDL.SYNC_INDEX ('customer_text_idx')
PL/SQL procedure successfully completed.
SCOTT@10gXE> SELECT   token_text, token_type, token_first, token_last, token_count
2 FROM     dr$customer_text_idx$i
3 /
TOKEN_TEXT                     TOKEN_TYPE TOKEN_FIRST TOKEN_LAST TOKEN_COUNT
BOB                                     0           1          2           2
CA                                      0           1          2           2
JONES                                   0           2          2           1
NOPLACE                                 0           1          1           1
NOWHERE                                 0           1          1           1
SMITH                                   0           1          2           2
SOMEWHERE                               0           2          2           1
ST                                      0           2          2           1
8 rows selected.
SCOTT@10gXE> SELECT   c.first_name, c.last_name, a.street, a.city
2 FROM     customers c, addresses a
3 WHERE    c.customer_id = a.customer_id
4 AND      CONTAINS (C.dummy, 'Anywhere') > 0
5 /
no rows selected
SCOTT@10gXE> -- once dummy is updated, the index is synchronized:
SCOTT@10gXE> UPDATE   customers
2 SET      dummy = NULL
3 WHERE    customer_id = 2
4 /
1 row updated.
SCOTT@10gXE> EXEC CTX_DDL.SYNC_INDEX ('customer_text_idx')
PL/SQL procedure successfully completed.
SCOTT@10gXE> SELECT   token_text, token_type, token_first, token_last, token_count
2 FROM     dr$customer_text_idx$i
3 /
TOKEN_TEXT                     TOKEN_TYPE TOKEN_FIRST TOKEN_LAST TOKEN_COUNT
BOB                                     0           1          2           2
CA                                      0           1          2           2
JONES                                   0           2          2           1
NOPLACE                                 0           1          1           1
NOWHERE                                 0           1          1           1
SMITH                                   0           1          2           2
SOMEWHERE                               0           2          2           1
ST                                      0           2          2           1
ANYWHERE                                0           3          3           1
BOB                                     0           3          3           1
CA                                      0           3          3           1
JONES                                   0           3          3           1
SMITH                                   0           3          3           1
ST                                      0           3          3           1
14 rows selected.
SCOTT@10gXE> SELECT   c.first_name, c.last_name, a.street, a.city
2 FROM     customers c, addresses a
3 WHERE    c.customer_id = a.customer_id
4 AND      CONTAINS (C.dummy, 'Anywhere') > 0
5 /
FIRST_NAME      LAST_NAME       STREET          CITY
Bob             Jones           Smith St.       Anywhere
SCOTT@10gXE> -- notice the changes if the index is rebuilt or dropped and recreated,
SCOTT@10gXE> ALTER INDEX customer_text_idx REBUILD
2 /
Index altered.
SCOTT@10gXE> SELECT   token_text, token_type, token_first, token_last, token_count
2 FROM     dr$customer_text_idx$i
3 /
TOKEN_TEXT                     TOKEN_TYPE TOKEN_FIRST TOKEN_LAST TOKEN_COUNT
ANYWHERE                                0           2          2           1
BOB                                     0           1          2           2
CA                                      0           1          2           2
JONES                                   0           2          2           1
NOPLACE                                 0           1          1           1
NOWHERE                                 0           1          1           1
SMITH                                   0           1          2           2
ST                                      0           2          2           1
8 rows selected.
SCOTT@10gXE> SELECT   c.first_name, c.last_name, a.street, a.city
2 FROM     customers c, addresses a
3 WHERE    c.customer_id = a.customer_id
4 AND      CONTAINS (C.dummy, 'Anywhere') > 0
5 /
FIRST_NAME      LAST_NAME       STREET          CITY
Bob             Jones           Smith St.       Anywhere
SCOTT@10gXE>

SID table in the general tab and master data/text tab

Hello Bi Experts,
For example 0material Info-object:
There is a SID table in the general tab i.e /BI0/SCOMP_CODE
There is another SID table Attribute in the master data/text tab i.e /BI0/XCOMP_CODE,here there are Nav attributes with name S__0COMPANY.
When i got 0company info-object it got its own SID table i.e /BI0/SCOMPANY
Can some body explain me what is significance of SID table Attribute in the master data/text tab and what is difference with SID Table of attribute?
Cheers,
Stalin

Hi,
SID is surrogate ID generated by the system. The SID tables are created when we create a master data IO. In SAP BW star schema, the distinction is made between two self contained areas: Infocube & master data tables/SID tables.
The master data doesn't reside in the satr schema but resides in separate tables which are shared across all the star schemas in SAP BW. A numer ID is generated which connects the dimension tables of the infocube to that of the master data tables.
The dimension tables contain the dim ID and SID of a particular IO. Using this SID the attributes and texts of an master data Io is accessed.
The SID table is connected to the associated master data tables via teh char key
Sid Tables are like pointers in C
Tables Starting with Description:
M - View of master data table
Q - Time Dependent master data table
H - Hierarchy table
K - Hierarchy SID table
I - SID Hierarchy structure
J - Hierarchy interval table
S - SID table
Y - Time Dependent SID table
T - Text Table
F - Fact Table - Direct data for cube ( B-Tree Index )
E - Fact Table - Compress cube ( Bitmap Index )
For more info go through the belwo link
http://www.sap-img.com/bw010.htm
Regards,
Marasa.

Request view of a cube - Which table for DTP texts?

Hi all,
does anybody know where I can find the text of column "DTP/InfoPackage" in slide "requests" if you start "manage" of an infocube?
We started a dtp, but name was impractical. We just wanna change text in request-view (not rename and reload).
It doesn't seem to be table RSBKDTPTH. We changed all names here, but old name is didplayed in request-view.
Does anybody know which tabe is selected here?
Regards,
Christoph

Hi,
check for the below tables for text.
RSBKDTPSTAT
Status Information on Data Transfer Process
RSBKDTPT
Texts on Data Transfer Processes
RSBKDTPTH
Texts on Data Transfer Processes
i checked my system BW 7.0 not there. if your using the BW 7.3/4 would have text.
Thanks,
Phani.

Transport Entries in SID Table

Hello....
Is there any way that I can transport the entries in the SID Table, Master Data Table for infoobject from dev to q? I perform the transport for the text table for that infoobject and I managed to transport over but the SID Table for that infoobject is not updated, the table is empty. Thanks!

Hi,
You can not transport the data like that from system to system. The best thing you can do is to download the data from one system into a csv file and load it into the next system using a flat file interface. Hope this helps.
Thanks and Regards
Subray Hegde

Tables for InfoObject

Hi all,
what are the tables that will be formed when creating a Info Object.
And what is the tcode to lookup these tables.
Regards,
Raj

Hi Ram,
Depending on the infoobject definition, the tables are created at the time of master data activation:
/BI<C OR DIGIT>/<TABLE CODE><INFOOBJECT>
<C or digit>: C = Customer-defined InfoObjects
digit = SAP-defined InfoObjects
<table code>: S = SID table
T = Text table
P = Time-independent master data attributes
Q = Time-dependent master data attributes
M = Union of time-dependent and time-independent master
data attributes
X = SID table for time-independent navigational attributes
Y = SID table for time-dependent navigational attributes
H = Hierarchy table
K = Hierarchy SID table
I = Hierarchy SID structure table
J = Hierarchy interval table
<InfoObject>: The name of the InfoObject without leading digits (if any)
Thanks..
Shambhu

SID's of MD object not reflected in Attribute SID table

Hello Experts,
I happened to delete the SID table of a display attribute of a MD characteristic and then re-loaded the master data. The SID's for the MD object is being created, but no SID's exist for the display attribute. I have a query having the display attribute as selection criteria and no values are being populated.
I ran an RSRV test (Elementary) for the display attribute Infoobject and it gave me the error 'Missing initial entry in table /BIC/SZ*. 'Correct Error' in RSRV didn't help.
Could you please advise on fixing the issue and having the SID table for the display attribute populated?
Thanks.

Hi
Go to Se14 and rebuild SID table or adjuct the entries .
Then try to reload data to taht MD object.
2. Run RSRV for that MD object with test type master data attributes
Hope this helps.
Regards,
Reddy

Regarding SID table for Texts

Similar Messages

Maybe you are looking for