Regarding TABLE node -- Footer Area in smartform

Hi Friends,
This is regarding smartform.
I have created TABLE node in MAIN window. As long as data exists in internal table my smartform is working fine. I mean it is displaying all the items and followed by TABLE FOOTER text.
Assume if no data exists in the internal table. In that case the TABLE FOOTER text is moving up. But I need at least 10 line space in that table MAIN Area. I mean even thogh the data is not there in the internal table.. It should display some space and then TABLE FOOTER text should be displayed.
Can any body tell me is there any way the TABLE FOOTER can fix irrespective of the data?
This is very urgent. Thanks in advance.
Regards
Raghu

For that, you can create one additional window such that it overlaps with the main window.
The size of this window should be exactly equal to the size of the main window, excluding footer. That means footer should come just after this window.
If there are no data to be displayed in the main window, then this empty window will be displayed.
In effect, some blank lines will be shown.
Just try this and check whether it suffice your requirement...
Jissa.

Similar Messages

REGARDING TABLE FOOTER IN SMARTFORMS

hi
i hav to pritn 6 items in page1 and 13 items in page2 and so on.
but while calculating total for fields
if pages exceed more than one i hav to fill with constant value'total' for corresponing fields in table in all pages except in last page
in last page i hav to total all the values from page1 and so on and i hav to print in the last page in table footer.
how to do this?
and what code i hav to write and where i hav to write it?
wether in code lines for text or in initialization of global definitions?

Hi,
Another idea is to have a structure declared in the smartform with the same type of the table being displayed.
In the table body section in the end you can insert program lines to add the required fields in another structure or simply some fields ( declared again in global definitions ) passing the table line data just got processed.
Then use the footer at page break option checked and the option footer at the end of table in the events tab of the table node.
And display the totals per page and also at the end of the table.
Hope this solves your problem.
Ram

Regarding Passing two internal Tables from Driver Program to Smartform

hi all,
I am Passing Two Internal Tables from Driver Program to Smartform it is going to dump and message is showing like this " one of the parameters eded according to the interface description was not specified ".
When i am passing one Internal Table Output is coming Perfectly. Is there any restriction for passing of internal tables.
Regards
Rami

HI,
Check the names specified in the smartfrom and FM whcih you are calling in the driver program. Both might be different....

Problem with 2 tables nodes in MAIN window in smartforms...

Hello Experts,
I have created 2 table nodes in my MAIN window to display data coming from different internal tables.
Now, the problem is that whenever the 1st table node page breaks, the 2nd table node gets affected
and it also page breaks. What I want is that the 2nd table must finish displaying certain number of records
before the page break of the 1st table node takes effect.
For example, I want to display 10 records for both table nodes 1 and 2. So I created an event in
table node 1 that if it is 10 records or more, then it will go to the next page. So in effect, my table
2 node did not print any records at all in the 1st page and it only started printing its first record in page 2.
How do I print 10 records also in table node 2 before it page breaks?

Hi,
It's simple,
Pre- U should had declared a second page for the same window with header, main & footer.
now
First when u r looping the internal table provide no of rows eg Row 1 TO 10. in the Loop ( Data Tab)
or
when defing TEXT Go to PC Editor and mention all the fields Under PROTECT - ENDPROTECT.
This would solve the issue.
Thanks
Ravi

Query on differences between table Icons and types in smartforms

Hello,
I have a question regarding the apparent differences between tables in smartforms.
I have noticed on some of the default smartforms that are supplied the table icon is the same as on the
'Create new session' button at the top of a Sap session window. The icon on a table that I am currently working on is like a 'spread sheet' design, a heading with columns, as shown in the current documentation. The way the two styles of tables work is different.
Is the difference down to the fact one was created in an older implementation of Sap?
The reason I ask is because the table I refered to initially, is easier when configuring cells.
Regards
Mike.

Hello Karthik
Thanks for taking the time to reply to my question.
The difference in the icons but with essentially the same function has always confused me since starting Smartforms.
Thank you for enlightening me.
I asked the question because the Complex node has a feature that I could have used. I have managed though to solve my problem using a table node.
Ten points awarded.
Best Regards
Mike Spear.

Different types of table nodes?

Ok this is probably a silly question but I have two different kind of of tables. The first looks like 3 columns the first one yellow and the second two are white. This one I build table lines on the table painter and when I add nodes under it I have to create a table line first and it adds the cells under it. This lets me assign text to each cell.
The second type the icon looks like the "creates new session" icon (window with a sun inside of it) This one does not let me make table_lines but does let me create text's nodes directly and then assign what kind of table line under the text nodes output options.
I've gone through all the tabs on both types to see if there is a setting that changes it from one to the other but haven't found anything. The reason I'm asking is because I'm trying to line up some fields on the second type of table but I cant seem to tell the text node which cell to put each field in becuase the second type of table doesn't let me create the table line node under it.
does anyone know how to change a table from one type to the other?
Thanks!

Hi..
If I understood right, the second node is a 'old' table node which is no more used in smartform development, (you can't create one, however changes could be done). You may not convert it to the present Table node but can redefine those logic in new table node.
For some more information regarding OLD table node you can refer the following link:
http://help.sap.com/saphelp_crm50/helpdata/en/d2/69a148cd8b11d3b563006094192fe3/content.htm
Regards,
Karthik
Edited by: Karthik S on Aug 6, 2010 12:00 AM

Table Parameter Values Are Input To RFC?

Hi,
My Requirement is Table Parameter Values are Input RFC.
We have Table Parameter With Project ID Column and Multiple Rows.
User Need To Enter Project id's in Table And Submit.The Result can be displayed.
In My Scenario User Need to enter the values in table.
I Developed Webdynpro Application and Deployed.
When i am trying to enter values into a table,table is not taking values.
Because in My Requirment is the user enter morethan one project id in table.
Thanks
SubbaRao Chinta

Hi,
Can you please explain more clearly that what is the meaning of "Table not taking values"?
Did you take the ColumnCellEditor(inputfield) for table column as input field.
For example, You need to create a value node as below
ProjectIdsNode (Value node with cardinality 0..n & selection 0...n)
---> ProjectId (Attribute)
And bind this ProjectIds node to table UI element. And bind ProjectId attribute to ColumnCellEditors(inputfield) value property.
Now in submit action loop though this node and get all the values entered in ProjectId attribute.
And set all these values into input of your RFC while executing to store in backend.
Regards,
Charan

The selected remote nodes 'node3' are not accessible

Hello,
I removed node3 from 2 node RAC Cluster.
After this I have re-add this node to my RAC. I added without any problem to CRS but I have a problem with script addNode.sh (/u01/app/oracle/product/crs/oui/bin).
I have to separate homes for ORACLE_HOME and ASM_HOME, so I need to run this script twice for each ORACLE_HOME.
I run addNode.sh from one of the cluster nodes (node1), if I run:
export ORACLE_HOME=/u01/app/oracle/product/11.1.0/asm
cd $ORACLE_HOME/oui/bin
./addNode.sh -silent CLUSTER_NEW_NODES={node3} CLUSTER_NEW_PRIVATE_NODE_NAMES={node3-priv} CLUSTER_NEW_VIRTUAL_HOSTNAMES={node3-vip}
I got the following error:
Performing tests to see whether nodes node2,node3 are available
............................................................SEVERE:The selected remote nodes 'node3' are not accessible.
... 100% Done.
I reviewed logs located in /u01/app/oraInventory/logs I found
Status of node 'node3':
null
The virtual host name 'node3-vip' for node 'node3' is already in use.
I checked crs_stat from $ORA_CRS_HOME, but all applications (ons, gsd, vip) and targets are ONLINE. I tried to run vipca -nodelist node1,node2,node3 and updated a configuration. I checked /etc/hosts, connection via SSH between all hosts belonging to RAC: node1, node1-vip, node1-priv etc. Everything looks like fine, so I have no idea what caused this problem.
Software which I used:
Linux: UNL 5.4 x86_64
11g Release 11.1.0.7.0 - 64bit, Oracle Clusterware
Thank you for your answer,
Best Regards,
Edited by: user4924714 on 2010-02-15 07:50

Hi,
Thanks for your reply.
I am running addNode.sh from node which already exist in the Rac Cluster. I tried on node1, node2 but the resulat are the same.
Best regards,

Tables and structures are used in a standard scripts

how to find which tables and structures are used in a standard scripts?
pls explain step by step process...
Edited by: abap on Jun 21, 2008 4:36 PM

Go to Transaction SE80, Select Program and paste that program name below..
Then drop down the tree of that program...then you will find option " Dict. Structures"..
Here you can find the tables which has been you for that transaction / program.
Regards,
Santosh

Footer area is displayed but SBO doesn't print it?

Dear Experts,
I have designed a Crystal Report with setup in A4. There is a "page number information" in the footer area.
Then the page number is showed if I preview it in SBO, but the page number is not printed.
Shoud I do some setting in SBO? I have changed the Page Setup become A4 through menu File-->Page Setup.
But the result is no changes.
Please advise me?
Note:
The page number can be printed if print it directly from Crystal Report.

Hi Indra
We have had this problem as well. For some reason B1 rescales the pages somehow when it prints.
To make the footer visible try dragging the bottom border of the footer down a bit to make the section bigger. It will still anchor the bottom of the footer to what B1 thinks is the printable area and push the resu up into the visible area.
This worked for us.
You may need to experiment with how big to make it!
Regards
Rob

Header and footer area in alv

Hi All,
What is the use of Header and Footer Area (Top of List & End of List ) in ALV table. Can any one explain me..
Thanks,
Susil

hi ,
In the below link there is an example for creating top of list end end of list.. in this the header and footer are displayed outside the ALV table.. My question is what is the use of the header and footer even I can use UI's to display the header and footer...
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0ee06d0-d475-2b10-ddad-bc4bf134cfb8?overridelayout=true
Thanks,
Susil.

Internal table declaration - work area and body

Hi all
I have declared my internal table in my program as
data : itab_wa type ZRESULT_LINE,
       itab    type ZRESULT_ROW.
Where ZRESULT_LINE and ZRESULT_ROW are the structure and table types.
Now I want to add
data: TCOLOR TYPE SLIS_T_SPECIALCOL_ALV.
in my internal table declaration. How can I do this. Please remember I need to have work area and body in my internal table as I have used work area and body in my code.
Waiting..............
Message was edited by: Raju Boda

HI,
See the Declarion types of workarea and Internal tables
* Table declaration (old method)
DATA: BEGIN OF tab_ekpo OCCURS 0,             "itab with header line
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
END OF tab_ekpo.
*Table declaration (new method)     "USE THIS WAY!!!
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,      "itab
      wa_ekpo TYPE t_ekpo.                    "work area (header line)
* Build internal table and work area from existing internal table
DATA: it_datatab LIKE tab_ekpo OCCURS 0,      "old method
      wa_datatab LIKE LINE OF tab_ekpo.
* Build internal table and work area from existing internal table,
* adding additional fields
TYPES: BEGIN OF t_repdata.
        INCLUDE STRUCTURE tab_ekpo. "could include EKKO table itself!!
TYPES: bukrs TYPE ekpo-werks,
       bstyp TYPE ekpo-bukrs.
TYPES: END OF t_repdata.
DATA: it_repdata TYPE STANDARD TABLE OF t_repdata INITIAL SIZE 0,   "itab
      wa_repdata TYPE t_repdata.                 "work area (header line
you need to maintain same structure for both workarea as well Internal table
Regards
Sudheer

Internal table and work area

Hi,
can anybody explain the concepts of Internal table and work area.Thanks in advance.

hai,
This may help u.
WORKAREA is a structure that can hold only one record at a time. It is a collection of fields. We use workarea as we cannot directly read from a table. In order to interact with a table we need workarea. When a Select Statement is executed on a table then the first record is read and put into the header of the table and from there put into the header or the workarea(of the same structure as that of the table)of the internal table and then transferred top the body of the internal table or directly displayed from the workarea.
Each row in a table is a record and each column is a field.
While adding or retrieving records to / from internal table we have to keep the record temporarily.
The area where this record is kept is called as work area for the internal table. The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
e.g.
data: begin of itab occurs 10,
ab type c,
cd type i,
end of itab. " this table will have the header line.
data: wa_itab like itab. " explicit work area for itab
data: itab1 like itab occurs 10. " table is without header line.
Internal tables are used for storing records which are obtained as a result when we use select statement on database. internal tables are run time entities and doesn't occupy any memory. they are dynamic.
internal tables are of types.
1. internal tables with header line. [header and body]
2. internal tables with out header line. [only body]
Workarea is the concept which is mainly useful when working with internal tables with out header line.
at any point of time we can access only one record through header of a internal table. every thing should be done [inserting,modifying, reading ] through header only.
ex: data: itab like standard table of mara with header line.
for internal tables with out header line we will create a work area [explicit header] as type of table for storing data into internal table.
ex: data: itab like mara,
wa like mara.
more about internal table types:
Standard table:
The key access to a standard table uses a sequential search. The time required for an access is linearly dependent on the number of entries in the internal table.
You should usually access a standard table with index operations.
Sorted table:
The table is always stored internally sorted by its key. Key access to a sorted table can therefore use a binary search. If the key is not unique, the entry with the lowest index is accessed. The time required for an access is logarithmically dependent on the number of entries in the internal table.
Index accesses to sorted tables are also allowed. You should usually access a sorted table using its key.
Hash table:
The table is internally managed with a hash procedure. All the entries must have a unique key. The time required for a key access is constant, that is it does not depend on the number of entries in the internal table.
You cannot access a hash table with an index. Accesses must use generic key operations (SORT, LOOP, etc.).
Hashed tables
This is the most appropriate type for any table where the main operation is key access. You cannot access a hashed table using its index.
The response time for key access remains constant, regardless of the number of table entries. Like database tables, hashed tables always
have a unique key. Hashed tables are useful if you want to construct and use an internal table which resembles a database table or for
processing large amounts of data.
TYPES VECTOR TYPE HASHED TABLE OF I WITH UNIQUE KEY TABLE LINE.
TYPES: BEGIN OF LINE,
COLUMN1 TYPE I,
COLUMN2 TYPE I,
COLUMN3 TYPE I,
END OF LINE.
DATA ITAB TYPE HASHED TABLE OF SPFLI
WITH UNIQUE KEY CARRID CONNID.
with regards,
B.Sowjanya,
reward points if helpful.

Regarding Table Creation

Hello Frnds
I created one table in Se11(ECC 6.0), ofter the activation of the table some wornings are coming so please guide me regarding this
1 Enhance category of the table is missing
2 Enhacne category of the include or subtype is missing...
Thanks
Regards
Narsimhulu

Hi
Its Warning only . You can still use this table . This wll show ERROR message in EXTENDED SYNTAX CHECK.
To remove this :....
SE11 - >Open the TAble -> EXTRAS - > ENHNACEMENT CATEGORY ->Click on CAN BE ENHANCED.
yopu can select <can be enhanced charecter type or Numeric type>
Thanks
Jagadeesh.G
Edited by: Jagadeshwar Gollapelly on Mar 7, 2008 10:50 AM

Structure of table and work area are not compatible - table control wizard

Structure of table and work area are not compatible is the error i am getting when specifying my internal table and work area in my table control? What am I doing wrong?

hii
this error comes when you have different structure of work area then internal table..so work area will not work here and you will not be able to append records in internal table.
check strucure of internal table and work area.it should be like below.
TYPES:
BEGIN OF type_s_kna1,
     kunnr LIKE kna1-kunnr,            " Customer Number
     name1 LIKE kna1-name1,            " Name
     vbeln LIKE vbap-vbeln,            " Sales Document
END OF type_s_kna1.
* Internal Table And Work Area Declarations For Customer Details      *
DATA : t_kna1 TYPE STANDARD TABLE OF type_s_kna1,
         fs_kna1 TYPE type_s_kna1.
regards
twinkal

Regarding TABLE node -- Footer Area in smartform

Similar Messages

Maybe you are looking for