Regarding Table Transport request

Hi,
I have created a table in local. Now i Like to move into a transport rerquest How?
Please tell me.
venkat

use se03 tcode
click on change object dirctory entries
tick the check box of R3TR TABL and enter table name
in below further restrictions
enter package as $tmp
then execute
click on ur table name and click on objects menu-->change object directory and enter the package name
and then activate ur table then it will ask TR no
so u can assign a Transport request no now

Similar Messages

  • Regarding table transport

    dear all ,
                    i have copied a table and activated and used it in a program and transported both program along with tables to quality
    . i got error RC = 8.(some domains and data elements not activated). i have again checked and activated all fields and data elemnts and domains , assigned it to a new request and transported again.
    i got the same error. RC = 8.
    what might be the problem and any altenate solutin becouse there are more than 200 fields in these tables,any help wud be gratefull.
    regards,
    naren

    With complex developments you have to be very accurate about your transport requests, so that all relevant objects make it into the next system in the landscape.
    1) import transport request(s)
    2) if RC = 8 or worse, scan the transport logs for all errors
    3) correct the errors in DEV, create new transports containing missing objects, etc.
    4) go back to 1)
    Sometimes there are circular dependencies between objects, then it can help to import all relevant transport requests again at once. If the number of transports becomes too large, you can combine all objects in those transports into a single one via tx SE03.
    Good luck.
    Thomas

  • Regarding Modifiable Transport Request Objetct name .

    Hi All,
    I have a requirement to get the transport request object names into a internal table.
    I have a table E071 which has all the object names for the request. But my problem is to there is no record found for the transport which are in modifiable status. Can anyone suggest me at the earliest.
    Thanks.
    Rani.

    Hi,
    Check E07* Tables
    Regards,
    Santosh

  • Custom table Transport Request

    Hi,
    I have created a ztable and assigned a package and tranport request, then I have created table maintennance generator for the same table but saved the table maintenance generator under $TMP.  As the table maitenance generator is not allowing to change the object directory entry, I have deleted the table maintenance generator and then freshly created the TMG for that table, this time I have given the package for TMG and the system haven't prompted any Transport request for my TMG and my TMG  got              saved(I guess it stored under the table request, but not sure).
    My doubt is, does my transport request will have the table and the table maintenace generator in it or not.....  if I transport the request will everything goes fine into the other system or not.
    Thanks
    Raju....

    Hello Raju,
    Why are you asking this question here ?
    Did you check the TR in SE10 ? Was the Function Group you have given in the TMG included in the TR ?
    If yes, it should be OK.
    @ Other posters: Do you guys have access to the OP's system ?
    BR,
    Suhas

  • Query regarding moving transport request

    HI all,
    I have query regarding moving the transport request.
    I have a main program with 3 includes. I have made some changes in the 1st include and transported it to the quality(testing). Now i made changes in the 2nd include and saved it in a different request(as request for the 1st include is already released). Now i am moving the changes of the 2nd include into the production. Here I want to know whether all the changes that i have made for the 1st include also will reflect in the production when the 2nd request is moved to production( incase of 1st include, only moved till quality) or only the changes made in the 2nd include will only reflect.
    Kindly clarify as soon as possible.
    Best regards
    John

    Hi,
    Thank you very much for the response. I have a query regarding the same. If i am making changes only in one single report and i am moving it to the quality. Now again i am making changes in the same report and saving it in a different request and moving it to the production. in this case, i wanted to know whether the whole changes made in the first and second request will reflect in the production or only the 2nd request's change will only reflect (since it is only a single report. there is no include in the program)
    Kindly send ur suggestions.
    Best regards,
    John

  • Regarding the Transport request

    hi all,
    I have been assigned two objects with two different TR. What i have done is i saved one object under the Request which is created for another object. Now please give me n e suggestions to save under the correct request. Any help would be highly appreciated.
    Best regards,
    Subhakar

    Hi Ramineni,
    Go to SE09 transaction. Display your request and click on display the objects in the request. Delete the object from the request by selecting the row in the table control.
    Go to your other transaction number and say display the object in the request and add your program using add entries in the table.
    That solves the problem...
    Correct me if I am wrong.
    Regards,
    Ramesh S
    *Award points if reply is useful

  • ChaRM: Edit Transport request Name

    Hi Team,
    I am implementing ChaRM in Sol Man. When i have creatd the transport request in ECC DEV  through Sol Man, by default the transport request name is appearing as "EDDK". I would like the name of the transport request to appear as "MCCK instead of EDDK*. Is it possible?
    Regards
    PSK

    hi
    Transport Requests are SAP auto generated,cannot changed.(Experts kindly correct me if i m wrong).its in the format of
    <source SID><k9><serial numbers>
    however you can change this serioal number before TR get created, By manually changing the filed TRKORR in the table E070L
    (index for assigning Numbers to TR)
    for all the tables involved in TR, refer [trasnport guide|http://wiki.sdn.sap.com/wiki/display/ABAP/Transport%20Guide]
    jansi

  • Which version of an object is included in a transport request

    Hi experts,
    I have one doubt regarding the transport requests and the object versions included in it.
    We've found in one development that there are differences between the development system and the productive system and all the transport requests, which include this object, have been transported to production.
    The transport requests were transported in the following sequence:
    Order number    Date            Time
    1. D01K904477  29.03.2007 17:41:52
    2. D01K904511  30.03.2007 17:21:54
    3. D01K904425  30.03.2007 17:51:36
    The last order transported contains a previous version of the object.
    From my own experience in other projects I'm not sure whether the transport system it's well configured or not.  I have the idea that the transport requests always include the last version of the object transported.  Probably, it depends on the transport routes... But I'm not sure.
    Any help would be highly appreciated.

    Thank you for your answer Juan.
    This is clear. But my doubt is not solved yet.
    I'm referring to the versions included in an older transport request. 
    In our system If we transport a previous transport request to production, the latest version of the object is overwritten.
    E.g.:
    TR  1    Date: 01/01/2007  (DD/MM/YYYY)  First version of the program
    TR  2    Date: 01/03/2007  (DD/MM/YYYY)  Second version of the program
    1. We transport TR 1 to production.
    2. We transport TR 2 to production.  We have the last version of the program in production.
    3. If we create transport request TR 3 and we include the object in this TR, this TR will include the active version of the object.
    4. If we transport TR 1  to production, latest version is overwritten.  <b><<<< This happens in our system.</b>
    We don't know if this is happenning due to the transport routes configuration.
    Thanks in advance.

  • Transport Request destination

    Hi Gurus,
    My question is after we actually release the request through the transport request,
    where can we see the released request no. or what is the destination of it.
    one more scenario --> how can we transfer a request from one server to another, please elaborate with example.
    Thanx.
    Regards.

    Hello,
    Transport Request (TR) number will remain same during complete cycle of configuration/development. That means when you create it in SAP, depending upon number range/definition system generates an internal TR number and will remain the same till you move the changes to LIVE. So even after releasing it, TR number will remain same.
    TR Transport: You can move TR's from one client to another and even one SAP instance to another.
    TR Transport Strategy is being decided at the start of any project (By Administrator/Basis).
    You can simply copy/move TR changes within Clients (single SAP instance) using SCC1 whereas from one SAP instance to another can be done by importing those using STMS.
    Refer SAP link for more info: http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/frameset.htm
    Talk to your senior Basis person on it for more info.
    Hope it will help.
    Regards,
    ANup

  • Table Maintenance View Transport Request

    Hello everybody,
    I need to use the table maintenance view for a customizing table without prompting for transport request is there a way to do this????, the customizing table is a Z table, the table was defined before like this because of the data in it, thanks in advance.
    Regards
    Julio Cesar

    Hi Julio,
    Sure: use SE11 for the Z-table, in menu Utilities->Table Maintenance generator and switch off the recording routine option.
    Regards,
    John.

  • Error in creating Transport Request for a view table

    Hello all,
    I have an ECC IDES 6.0 system named EC1 and another one which is ECC EhP4 IDES named EA1 which I have just installed.
    One of my requesters has a view table named ZVAITM_TBLE in EC1 and she wants it to be transported to EA1.
    So I created a workbench transport in SE10 and included the following:
    PgmID = R3TR
    Obj = VDAT
    Object name = ZVAITM_TBLE
    But when I press enter, I encountered the following error:
    No object definition exists for Customizing object ZVAITM_TBLE
    Message no. TK427
    Diagnosis
    The Customizing object R3TR VDAT ZVAITM_TBLE is not defined in the tables of the Change and Transport System.
    This means that you cannot use the Transport Organizer to edit it.
    System Response
    The function terminates.
    Procedure
    First check whether the name of the object is correct. Then you (or the system administrator) should check the object definition, to ensure that the object was created correctly (transaction SOBJ).
    If the object does not exist, then create it or delete it from the request/task.
    I am new to transports so I have no idea how to proceed.
    Please advise.
    Thanks a lot!
    Cha Cha

    Hello Cha,
    Kindly open this custom table using SM30 and try creating a transport request from there.
    Regards
    Vivek

  • Problem in tables of transport request !!!!

    Hi all,
    When i doing the Charm Process....nd during that when the developer generates the transport request....at that time that tp request appears in table /tmwflow/trordhc but it does not appear in /tmwflow/track .... nd after releasing the subtasks and then finally the whole transport request....at that point also it does not appear in /tmwflow/track ..... after this when the basis person pass that transport request to quality....then the /tmwflow/track shows 1 record for that transport request.....so finally after the whole flow /tmwflow/track will show 2 records for that transport request i.e 1 of quality and 1 of production....logically 'dev' record should also be there.....what i am noticing is after few hours like 2 or 3 hours that development record started appearing in table /tmwflow/track .... so is it a problem in configuration of solution manager or this sudden appearance of dev record is ok....coz ive to build a report in which it displays the tracking of tp requests....
    Any suggestions would be helpful...
    Regards,
    Deadlocks

    Hey deadlocks,
    many ChaRM tables are updated as Fernando said when cmssyscol job finished.
    I guess those 2/3 hours correspond to the time u waited before the job runned. The transaction solar_eval and a couple of others allow u updating data as well.
    U have to know that this job may sometimes/quite often give unsupected/missing data; and also delayed. The best you can do is simply read the tr log using a function modul and interpretate info concerning the transport requests
        CALL FUNCTION 'TRINT_TDR_USER_COMMAND'
          EXPORTING
            iv_object  = lv_object
            iv_type    = ls_sel_node-type
            iv_command = lv_command
          IMPORTING
            ev_exit    = pv_exit.
    LV_OBJECT                                             SLMK900004
    LS_SEL_NODE-TYPE                                     REQU
    LV_COMMAND                                             TAST
    for example.
    You can debug log reading in SE01 and put a watchpoint on instruction 'CALL FUNCTION'. It is the second one.
    This will display log on screen
    Good luck
    Khalil

  • Table for Transport request

    Hi all,
    We have requirement like based on the object name need to fiind the latest transport request number(which creted newly after the changes).
    please if any one have idea, in which table it is getting stored please help me.
    thanks in advance.
    thanks & regards,
    Madhavi

    Hi,
    we have different tables meant to store different types of requests.
    E070 , E071 could be checked.
    Hope this helps you.
    Regards,
    Kiran

  • Table for transport request objects

    Hi,
    I need to copy the objects present in the transport request(Request/Modified) to any other transport request.
    Can any body tell me the table that stores the information regarding transport request.
    Pooja

    For your requirement you can do with menu bar options from the SE09 transaction,
    Don't go for suggested table level changes,
    Never in SAP system do any SAP table level change, you are invalidating your Service licence agreement in doing so. If any inconsistencies arise in production because of such recklessness then SAP will simply blame you. You can do as many changes in a Z table created by you but never in SAP tables.
    Hope you understand what I meant!
    --Naveen Inuganti

  • Include table entries into Transport Request manually @ SM31

    Hi All,
    I have an issues reg table maintenance at SM31.
    We have a Z Table and I can add entries at SM31 to that table. But:
    System has not asked Transport request while saving the data (after additions to the table)
    Option to include in Transport Request manually is not available @ menu -> Edit -> Transport -> Include in request. Include in Request is not highlighted to select here.
    Pls help me the process to add my table entries into a Transport Request.
    Thank you
    Chandu

    Hi,
    seems like your table is defined as Application table (master and transaction data).
    Check SE11 to be sure
    Database table: enter name > Display > Delivery & Maintenance
    Delivery Class > is this A?
    If so then there is no transport and it can be maintained in all systems.
    You could try if required to create manual transport via SE01.
    Programm ID: R3TR
    Object: TDAT 
    Objectname: your table name
    Regards
    Hein

Maybe you are looking for