Regarding the date.

HI All,
   I created two user defined fileds, I.e., Date And test Date. As my problem is, I entered first filed I.e, Date.. When i came to second one, press shift+F2 or automaticaly, Show 15th day of what i entered in first field..
  I.e, If i entered in first field as, 02-10-2008. When i go to the next filed, it will show like this. I.e., 16-10-2008.
  If any body know this type of query, Plz tell me..
Regards,
krishna.v

Hi Krishna
You need to reference the run time value of the first date field and add 15 if I understand you correctly. Try the following (assuming first field's name is U_DATE):
SELECT ${$U_DATE.0.DATE} + 15 or SELECT ${OINV.U_DATE.DATE} + 15
Replace Squiggle brackets with square brackets.
Kind regards
Peter Juby

Similar Messages

  • How can I select a radio button in a table regarding the data in the cells?

    Hi everyone
    This is the issue: I need to select the RadioButton which is in a table with data related to transfers in the cells next to it, so I need to select the correct radio regarding the data next to it.
    This is the whole process: First I go to the Add Recurring Transfer section and select the parameters of the transfer (Accounts, date, amount, months etc), then with VB code I capture those parameters from the page and store them into Global variables for further usage on my E-tester script.
    Right after that I need to select the radiobutton regarding the data of the transfer that I already created in order to delete it or modify it (Please see Attachment selectradio1.jpg)
    So How can I move along the table and compare each cell with the variables that I created with the transfer information, so when I finish comparing a row cell by cell and if all the comparison match well in that row, I could select the radiobutton of the row.
    Note: Second Attachment selectradio2.jpg shows the source code of the table...If you need more info please let me know
    Could you please help me with this problem?? I'm Kind of frustrated with this issue jejeje

    Here is an example. I uploaded mock html so that you can actually try this code. I think this does exactly what you are asking.
    Private Sub RSWVBAPage_afterPlay()
    Dim tbl As HTMLTable
    Dim tblRow As HTMLTableRow
    Dim tblCell As HTMLTableCell
    Dim strValue As String
    Dim rButton As HTMLInputElement
    ' ******** This would be your global variable. I put this so that values are seperated by a semicolin you can use what ever format works for you.
    strValue = "03/22/2008;03/22/2008;*************1977;*************1977;$25.25;Jan, Jun, Jul, Dec"
    ' Strip out the ; for inner text comparison
    strValue = Replace(strValue, ";", "")
    ' This will get the table but can be modifoed to be more specific
    Set tbl = RSWApp.om.FindElement(, "TABLE")
    ' This loops through all the rows in the table until a match to the strValue is found
    ' then clicks the radio button. Findelements allows you to specify a root element
    ' once the correct root row is found, FindElemets can get the correct radio button
    For Each tblRow In tbl.rows
      If tblRow.innerText = strValue Then
        Set rButton = RSWApp.om.FindElement("account", "INPUT", "NAME", , , tblRow)
         rButton.click
       End If
    Next
    End Sub
    I also uploaded the script I created. You should be able to run it and see how it works.
    This should get you going.

  • Query regarding the data type for fetcing records from multiple ODS tables

    hey guys;
    i have a query regarding the data type for fetcing records from multiple ODS tables.
    if i have 2 table with a same column name then in the datatype under parent row node i cant add 2 nodes with the same name.
    can any one help with some suggestion.

    Hi Mudit,
    One option would be to go as mentioned by Padamja , prefxing the table name to the column name or another would be to use the AS keyoword in your SQL statement.
    AS is used to rename the column name when data is being selected from your DB.
    So, the query  Select ename as empname from emptable will return the data with column name as empname.
    Regards,
    Bhavesh

  • Regarding the date of last change in sales order...

    Hi,
    Can anyone help me in the scenario...
    I have to pick the date of last change in sales order...whether it is done on Configuration items ,additional data B or on the ordered quantity...
    the problem is that it has some customized fields that are included in VBAK....
    So i need help regarding this...shud i have to writ a user exit for this....or i hv to do a change in USEREXIT_SAVE_DOCUMENT .
    Plz help me..
    Edited by: Amit Gupta on May 1, 2008 3:02 PM

    VBAK-AEDAT will be updated, evenIf you have your custom fields in Sales Order.
    Regards,
    Naimesh Patel

  • Regarding the dates to retrieve the required records.

    Hi,
           In the selection screen, i have radiobuttons for reporting period like ALL, PAST, FUTURE, TODAY,OTHERKEYDATE ,e.tc.
    My report should run for the date which i have selected on the selection screen.
    For today, we can write the condition as
                          Begda < = sy-datum and enda > = sy-datum.
    But i have to write in general for everydate which i selected.
    I am writing report for OM. i am not using PCH LDB.
    if i use LDB , i can write Begda < = pnp-enda and endda >= pnp-enda.
    But iam not using the LDB PCH.
    how to write query to retreive the required date.

    hi,
    let us say your radio buttons have the name as follows:
    P_ALL  -> for all
    P_TODAY -. for only today
    P_PAST -. for all dates in past from today.(not including today)
    P_FUTURE -> for all dates in FUTURE from today( not including today)
    P_OTHERKEYDATE -> for any other date that  user enters.
    *Logic:
    if P_ALL = 'X'.
    code is as such the program runs for all records irrespective of dates.
    elseif  P_TODAY = 'X'.
    p_date = sy-datum. " this p_date is a variable used to hold today's date.
    now code it so that it runs only for the records having date = p_date.
    elseif P_PAST = 'X'.
    *write code to pick all the dates which are in past , I don't know what you have as begin and end dates and what they for, use the begin and end dates to calculate past dates and run the code only for those past dates.
    elseif P_FUTURE = 'X'.
    *do as done in past,for future dates.
    else p_date = otherkeydate "hope this is entered by user somewhere on the screen.
    *run the code for only that p_date.
    endif.
    <REMOVED BY MODERATOR>
    deepti.
    Edited by: Alvaro Tejada Galindo on Feb 5, 2008 4:54 PM

  • Regarding the date format

    Hi,
    My requirement is:
    We have to generate a batch number in such a way that
    the first character should be the last digit of the current date
    the second character should be the month identifier(1-9 from Jan to sept and for the rest Oct-A Nov-B and Dec-C)
    the third character should be the day identifier(for dates 1-9,its 1,2..9 and for the rest consecutive dates starting frm a,b,...v)
    Please help me how to achive this.

    Hi
       U can do this by using Character String Operations on DATE and based on value use IFELSE control statement.
       like ur DATE is 20081202 then
                          if date+6(2) = 01.
                            c3 = 1.
                          elseif date+6(2) = 02.
                          endif.
    but this is simple way , u can find some more optamize way.
    Regards
    Sachin

  • Regarding the date condition

    Hi all,
    I am writing program for Training and event management in that advanced concept LSO(learning Solutions). here i am using One include program RHXMACRO. So that i will get the
    various date fields like today, current month, current year etc... Now i am writing one select statement to fetch the records.
    now my problem is, my seletc statement is not
    working if i use macro RHXMACRO. but the same select statement is working if i dont use the
    above macro. what is the solution for this.
    thanking u,
    regards,
    giri.

    > now my problem is, my seletc statement is not
    > working if i use macro RHXMACRO. but the same select statement is working if i dont use the
    > above macro. what is the solution for this.
    >
    Stop using RHXMACRO, obviously...

  • Question regarding the date in MARC for a daily movement report

    Hi,
    I have a requirement, where i need to create a report, based on the selection screen parameters for <u>purchasing group</u> and <u>date</u> (the default is 1 minus the current date.)
    The report is used to view the daily movement, relating to the selected purchasing group and date.
    Where and how do i find entries for that specific date? What tables and field or fields do i use?
    Points will be rewarded and all help will be greatly appreciated.
    Thank You,
    John

    See the below example code :
    REPORT ZQA_MOVEMENT_ANALYSIS no standard page heading.
    *>>> ELEMENTS COPIED FROM REPORT BALVHT01 .
    ALV
    TYPE-POOLS: SLIS.
    Includes
    INCLUDE .
    tables: mkpf, mseg, marc, mara, makt, mard.
    DATA =============================================================== *
    DATA:       G_BOXNAM TYPE SLIS_FIELDNAME VALUE  'BOX',
                G_EXPANDNAME TYPE SLIS_FIELDNAME VALUE  'EXPAND',
                P_F2CODE LIKE SY-UCOMM       VALUE  '&ETA',
                P_LIGNAM TYPE SLIS_FIELDNAME VALUE  'LIGHTS',
                G_SAVE(1) TYPE C,
                G_TABNAME_HEADER TYPE SLIS_TABNAME,
                G_TABNAME_ITEM   TYPE SLIS_TABNAME,
              g_default(1) type c,
                G_EXIT(1) TYPE C,
                GX_VARIANT LIKE DISVARIANT,
                G_VARIANT LIKE DISVARIANT.
    CONSTANTS:
    GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
    GC_FORMNAME_ITEM_EXPAND TYPE SLIS_FORMNAME VALUE 'ITEM_EXPAND',
    GC_FORMNAME_user_command type slis_formname value slis_ev_user_command.
    DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
          GS_LAYOUT   TYPE SLIS_LAYOUT_ALV,
          GS_KEYINFO  TYPE SLIS_KEYINFO_ALV,
          GT_SORT     TYPE SLIS_T_SORTINFO_ALV,
          GT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV,
          GT_EVENTS   TYPE SLIS_T_EVENT.
    DATA: G_REPID LIKE SY-REPID.
    DATA: GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
    data: begin of i_movement occurs 0,
            matnr   like mseg-matnr,
            bwart   like mseg-bwart,
            budat   like mkpf-budat,
            mblnr   like mseg-mblnr,
            gjahr   like mseg-gjahr,
            shkzg   like mseg-shkzg,
            menge   like mseg-menge,
            meins   like mseg-meins,
          end of i_movement.
    data: begin of i_mat occurs 0,
            matnr   like mara-matnr,
            maktx   like makt-maktx,
            labst   like mard-labst,
            meins   like mara-meins,
          end of i_mat.
    data: begin of i_output occurs 0.
            include structure ZFD_MOVEMENT_ANALYSIS.
    data:  end of i_output.
    data i_popuptext like popuptext occurs 2 with header line.
    data: v_matnr like mara-matnr.
    data: x_movement  like i_movement.
    SELECTION-SCREEN --------------------------------------------------- *
    SELECTION-SCREEN BEGIN OF BLOCK period WITH FRAME TITLE text-001.
    select-options: so_budat   for mkpf-budat obligatory no-extension.
    SELECTION-SCREEN END OF BLOCK period.
    SELECTION-SCREEN BEGIN OF BLOCK org WITH FRAME TITLE text-002.
    parameters: p_werks   like marc-werks obligatory default '1000',
                p_lgort    like mard-lgort obligatory default '1000'.
    select-options: so_matnr   for mseg-matnr,
                    so_dept    for marc-zzdept,
                    so_kostl   for mseg-kostl,
                    so_ekgrp   for marc-ekgrp.
    SELECTION-SCREEN END OF BLOCK org.
    SELECTION-SCREEN SKIP 1.
    Variant
    SELECTION-SCREEN BEGIN OF BLOCK 0 WITH FRAME TITLE TEXT-P01.
    PARAMETERS: P_VARI LIKE DISVARIANT-VARIANT.
    SELECTION-SCREEN END OF BLOCK 0.
    INITITALIZATION ==================================================== *
    INITIALIZATION.
      G_REPID = SY-REPID.
      G_TABNAME_ITEM   = 'I_OUTPUT'.
    define keyinfo
      CLEAR GS_KEYINFO.
      GS_KEYINFO-ITEM01   = 'MATNR'.
      PERFORM E01_FIELDCAT_INIT  USING GT_FIELDCAT[].
      PERFORM E03_EVENTTAB_BUILD USING GT_EVENTS[].
      PERFORM E04_COMMENT_BUILD  USING GT_LIST_TOP_OF_PAGE[].
      PERFORM E06_T_SORT_BUILD   USING GT_SORT[].
      PERFORM E07_SP_GROUP_BUILD USING GT_SP_GROUP[].
    Set Options: save variants userspecific or general
      G_SAVE = 'A'.
      PERFORM VARIANT_INIT.
    Get default variant
      GX_VARIANT = G_VARIANT.
      CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
           EXPORTING
                I_SAVE     = G_SAVE
           CHANGING
                CS_VARIANT = GX_VARIANT
           EXCEPTIONS
                NOT_FOUND  = 2.
      IF SY-SUBRC = 0.
        P_VARI = GX_VARIANT-VARIANT.
      ENDIF.
    AT SELECTION-SCREEN ================================================ *
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARI.
      PERFORM F4_FOR_VARIANT.
    PAI
    AT SELECTION-SCREEN.
      PERFORM PAI_OF_SELECTION_SCREEN.
    START-OF-SELECTION ================================================= *
    start-of-selection.
      perform check_background_processing.
      PERFORM E05_LAYOUT_BUILD USING GS_LAYOUT.     "wg. Parameters
      perform get_data.
      perform build_report.
      perform write_report.
    AT LINE SELECTION ================================================== *
    at line-selection.
      if sy-lsind = 1.
        format intensified off.
        if not i_output-matnr is initial.
          v_matnr = i_output-matnr.
          loop at i_movement where matnr = i_output-matnr.
            write: / i_movement-mblnr hotspot on,
                     i_movement-bwart,
                     i_movement-budat,
                     i_movement-shkzg.
            if i_movement-shkzg = 'H'.
              format color col_negative.
            else.
              format color col_positive.
            endif.
            write:     i_movement-menge,
                       i_movement-meins.
            format color off.
            hide: i_movement-mblnr, i_movement-gjahr.
          endloop.
          clear i_movement.
        endif.
      elseif sy-lsind = 2.
        set parameter id 'MBN' field i_movement-mblnr.
        set parameter id 'MJA' field i_movement-gjahr.
        call transaction 'MB03' and skip first screen.
      endif.
    ==================================================================== *
    top-of-page.
      perform top_of_page.
    top-of-page during line-selection.
      read table i_mat with key matnr = i_output-matnr.
      write: i_output-matnr,
             i_mat-maktx,
             so_budat-low, ' to ', so_budat-high.
      uline.
      clear: i_mat, i_output.
    *&      Form  write_report
          text
    -->  p1        text
    <--  p2        text
    FORM write_report.
    Call ABAP/4 List Viewer
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
        EXPORTING
        I_INTERFACE_CHECK              = ' '
        I_BYPASSING_BUFFER             =
        I_BUFFER_ACTIVE                = ' '
          I_CALLBACK_PROGRAM             = g_repid
        I_CALLBACK_PF_STATUS_SET       = ' '
        I_CALLBACK_USER_COMMAND        = ' '
        I_STRUCTURE_NAME               =
          IS_LAYOUT                      = gs_layout
          IT_FIELDCAT                    = gt_fieldcat[]
        IT_EXCLUDING                   =
          IT_SPECIAL_GROUPS              = gt_sp_group[]
          IT_SORT                        = gt_sort[]
        IT_FILTER                      =
        IS_SEL_HIDE                    =
        I_DEFAULT                      = 'X'
          I_SAVE                         = g_save
          IS_VARIANT                     = g_variant
          IT_EVENTS                      = gt_events[]
        IT_EVENT_EXIT                  =
        IS_PRINT                       =
        IS_REPREP_ID                   =
        I_SCREEN_START_COLUMN          = 0
        I_SCREEN_START_LINE            = 0
        I_SCREEN_END_COLUMN            = 0
        I_SCREEN_END_LINE              = 0
      IMPORTING
        E_EXIT_CAUSED_BY_CALLER        =
        ES_EXIT_CAUSED_BY_USER         =
        TABLES
          T_OUTTAB                       = i_output
        EXCEPTIONS
          PROGRAM_ERROR                  = 1
          OTHERS                         = 2
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " write_report
    *&      Form  get_data
          text
    -->  p1        text
    <--  p2        text
    FORM get_data.
      if so_dept[]    is initial and
         so_matnr[]   is initial and
         so_kostl[]   is initial and
         so_ekgrp[]   is initial.
        i_popuptext-text = 'Please choose a department, material number,'.
        append i_popuptext.
        i_popuptext-text = 'cost center or purchasing group'.
        append i_popuptext.
        CALL FUNCTION 'DD_POPUP_WITH_INFOTEXT'
          EXPORTING
            TITEL              = 'Please Note'
            START_COLUMN       = 1
            START_ROW          = 1
            END_COLUMN         = 5
            END_ROW            = 3
          INFOFLAG           = ' '
        IMPORTING
          ANSWER             =
          TABLES
            LINES          = i_popuptext.
      Stop execution until user enters a purch group or dept.
        stop.
      endif.
    get all materials matching selection criteria - exclude finished
    materials
      select kmatnr kmaktx labst meins
      from ( ( ( marc as c inner join makt as k
               on cmatnr = kmatnr ) INNER JOIN mard as d
               on cmatnr = dmatnr ) INNER JOIN mara as a
               on cmatnr = amatnr )
      into table i_mat
      where c~matnr in so_matnr   and
            c~ekgrp in so_ekgrp   and
            c~zzdept in so_dept   and
            c~werks  = p_werks    and
            d~werks  = p_werks    and
            k~spras  = 'E'        and
            d~lgort  = p_lgort
      order by k~matnr.
      if sy-subrc = 0.
        read table so_budat index 1.
        loop at i_mat.
        get all material movements for all materials identified since
        start date on date interval selected by user
          select matnr bwart budat bmblnr bgjahr shkzg menge meins
          appending table i_movement
          from (  mseg as b INNER JOIN mkpf as a
                ON bmblnr = amblnr AND
                   bmjahr = amjahr )
          where b~matnr = i_mat-matnr and
                a~budat >= so_budat-low.
        endloop.
      endif.
    ENDFORM.                    " get_data
    *&      Form  build_report
          text
    -->  p1        text
    <--  p2        text
    FORM build_report.
      data: x_movement        like i_movement,
            v_processed_inv   like mseg-menge.
      sort i_movement by matnr ascending
                         budat descending.
      loop at i_movement.
      if movement after end of period specified, use movement to work
      backwards to inventory at end of selected period end date
        if i_movement-budat > so_budat-high.
          if i_movement-shkzg = 'H'.
            add i_movement-menge to i_output-ending_inv.
          else.
            subtract i_movement-menge from i_output-ending_inv.
          endif.
        endif.
      compute inventory at beginning of period
        if i_movement-shkzg = 'H'.
          add i_movement-menge to i_output-begin_inv.
        else.
          subtract i_movement-menge from i_output-begin_inv.
        endif.
      if movement in the time period specified, summarize movements by
      type
        if i_movement-budat >= so_budat-low and
           i_movement-budat <= so_budat-high.
          if i_movement-bwart+0(1) = '1'.
            if i_movement-shkzg = 'S'.
              add i_movement-menge to i_output-purchased_inv.
            else.
              subtract i_movement-menge from i_output-purchased_inv.
            endif.
          elseif i_movement-bwart+0(1) = '2'.
            if i_movement-shkzg = 'S'.
              add i_movement-menge to i_output-transferred_inv.
            else.
              subtract i_movement-menge from i_output-transferred_inv.
            endif.
          elseif i_movement-bwart+0(1) = '4'.
            if i_movement-shkzg = 'S'.
              add i_movement-menge to i_output-transferred_inv.
            else.
              subtract i_movement-menge from i_output-transferred_inv.
            endif.
          elseif i_movement-bwart+0(2) = '55'.
            if i_movement-shkzg = 'S'.
              add i_movement-menge to i_output-scrapped_inv.
            else.
              subtract i_movement-menge from i_output-scrapped_inv.
            endif.
          elseif i_movement-bwart+0(1) = '6'.
            if i_movement-shkzg = 'S'.
              add i_movement-menge to i_output-sold_inv.
            else.
              subtract i_movement-menge from i_output-sold_inv.
            endif.
          elseif i_movement-bwart+0(1) = '7'.
            if i_movement-shkzg = 'S'.
              add i_movement-menge to i_output-cycled_inv.
            else.
              subtract i_movement-menge from i_output-cycled_inv.
            endif.
          elseif i_movement-bwart+0(2) = '96'.
            if i_movement-shkzg = 'S'.
              add i_movement-menge to i_output-recovered_inv.
            else.
              subtract i_movement-menge from i_output-recovered_inv.
            endif.
          else.
            if i_movement-shkzg = 'S'.
              add i_movement-menge to i_output-other.
            else.
              subtract i_movement-menge from i_output-other.
            endif.
          endif.
        endif.
      Summarize data for material number and add to output list
        x_movement = i_movement.
        at end of matnr.
          clear i_mat.
          read table i_mat with key matnr = i_movement-matnr.
          i_output-maktx = i_mat-maktx.
        inventory at end of period = current inventory + changes since end
        of period
          add i_mat-labst to i_output-ending_inv.
        inventory at begin of period = ending inventory + changes in
        interval
          add i_mat-labst to i_output-begin_inv.
        build percentages for types of movements in period - the only
        reason this data needs to be stored rather than computed on the
        fly is for sorting of data
          v_processed_inv = ( i_output-begin_inv - i_output-ending_inv )
                            + i_output-purchased_inv.
          if v_processed_inv <> 0.
            i_output-percent_sold =
                  ( i_output-sold_inv / v_processed_inv ) * 100 * -1.
            i_output-percent_scrapped =
                  ( i_output-scrapped_inv / v_processed_inv ) * 100 * -1.
            i_output-percent_transferred =
                  ( i_output-transferred_inv / v_processed_inv ) * 100 * -1.
            i_output-percent_cycled =
                  ( i_output-cycled_inv / v_processed_inv ) * 100 * -1.
            i_output-percent_recov =
                  ( i_output-recovered_inv / v_processed_inv ) * 100 * -1.
            i_output-other =
                  ( i_output-other / v_processed_inv ) * 100 * -1.
          endif.
        record material number
          move i_movement-matnr to i_output-matnr.
          i_output-meins = x_movement-meins.
          append i_output.
          clear i_output.
        endat.
      endloop.
      clear i_movement.
    ENDFORM.                    " build_report
          FORM E01_FIELDCAT_INIT                                        *
    -->  E01_LT_FIELDCAT                                               *
    FORM E01_FIELDCAT_INIT USING E01_LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
      DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
           EXPORTING
              I_PROGRAM_NAME         =
                I_INTERNAL_TABNAME     = G_TABNAME_ITEM
                I_STRUCTURE_NAME       = 'ZFD_MOVEMENT_ANALYSIS'
              I_CLIENT_NEVER_DISPLAY = 'X'
                I_BYPASSING_BUFFER     = 'X'
           CHANGING
                CT_FIELDCAT            = E01_LT_FIELDCAT[].
    ENDFORM.
          FORM E03_EVENTTAB_BUILD                                       *
    -->  E03_LT_EVENTS                                                 *
    FORM E03_EVENTTAB_BUILD USING E03_LT_EVENTS TYPE SLIS_T_EVENT.
      DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
           EXPORTING
                I_LIST_TYPE = 1
           IMPORTING
                ET_EVENTS   = E03_LT_EVENTS.
    tell program which form to call for top of page event
      READ TABLE E03_LT_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
                               INTO LS_EVENT.
      IF SY-SUBRC = 0.
        MOVE GC_FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
        APPEND LS_EVENT TO E03_LT_EVENTS.
      ENDIF.
    tell program which form to call for item expand event
      READ TABLE E03_LT_EVENTS WITH KEY NAME = slis_ev_item_data_expand
                               INTO LS_EVENT.
      IF SY-SUBRC = 0.
        MOVE GC_FORMNAME_ITEM_EXPAND TO LS_EVENT-FORM.
        APPEND LS_EVENT TO E03_LT_EVENTS.
      ENDIF.
    ENDFORM.
          FORM E04_COMMENT_BUILD                                        *
    -->  E04_LT_TOP_OF_PAGE                                            *
    FORM E04_COMMENT_BUILD USING E04_LT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
      DATA: LS_LINE TYPE SLIS_LISTHEADER.
    Listenüberschrift: Typ H
      CLEAR LS_LINE.
      LS_LINE-TYP  = 'H'.
    LS_LINE-KEY:  not used for this type
      write sy-datum to LS_LINE-INFO.
      APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
      CLEAR LS_LINE.
      LS_LINE-TYP  = 'H'.
    LS_LINE-KEY:  not used for this type
      LS_LINE-INFO = 'FreshDirect Product Reorder Report'.
      APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
    Kopfinfo: Typ S
    CLEAR LS_LINE.
    LS_LINE-TYP  = 'S'.
    LS_LINE-KEY  = TEXT-050.
    LS_LINE-INFO = TEXT-010.
    APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
    LS_LINE-KEY  = TEXT-051.
    APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
    Aktionsinfo: Typ A
    CLEAR LS_LINE.
    LS_LINE-TYP  = 'A'.
    LS_LINE-KEY:  not used for this type
    LS_LINE-INFO = TEXT-002.
    APPEND LS_LINE TO  E04_LT_TOP_OF_PAGE.
    ENDFORM.
          FORM E05_LAYOUT_BUILD                                         *
    <->  E05_LS_LAYOUT                                                 *
    FORM E05_LAYOUT_BUILD USING E05_LS_LAYOUT TYPE SLIS_LAYOUT_ALV.
      E05_LS_LAYOUT-F2CODE            = P_F2CODE.
      E05_LS_LAYOUT-ZEBRA             = 'X'.
      E05_LS_LAYOUT-colwidth_optimize = 'X'.
    ENDFORM.
          FORM E06_T_SORT_BUILD                                         *
    -->  E06_LT_SORT                                                   *
    FORM E06_T_SORT_BUILD USING E06_LT_SORT TYPE SLIS_T_SORTINFO_ALV.
      DATA: LS_SORT TYPE SLIS_SORTINFO_ALV.
      CLEAR LS_SORT.
      LS_SORT-FIELDNAME = 'MATNR'.
      LS_SORT-TABNAME   = G_TABNAME_ITEM.
      LS_SORT-SPOS      = 1.
      LS_SORT-UP        = 'X'.
      APPEND LS_SORT TO E06_LT_SORT.
    ENDFORM.
          FORM E07_SP_GROUP_BUILD                                       *
    -->  E07_LT_SP_GROUP                                               *
    FORM E07_SP_GROUP_BUILD USING E07_LT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV.
      DATA: LS_SP_GROUP TYPE SLIS_SP_GROUP_ALV.
      CLEAR  LS_SP_GROUP.
      LS_SP_GROUP-SP_GROUP = 'A'.
      LS_SP_GROUP-TEXT     = TEXT-005.
      APPEND LS_SP_GROUP TO E07_LT_SP_GROUP.
    ENDFORM.
          FORM TOP_OF_PAGE                                              *
    FORM TOP_OF_PAGE.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
           EXPORTING
                IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
                  data v_repid like sy-repid.
    write: / sy-datum, sy-uzeit,
       100 'FreshDirect Material Movement Type Analysis Report'.
    show parameters chosen on selection screen in header
    v_repid = sy-repid.
    CALL FUNCTION 'Z_WRITE_SELECTION_SCREEN'
          EXPORTING
               REPID            = v_repid
          EXCEPTIONS
               REPORT_NOT_FOUND = 1
               OTHERS           = 2.
    write column headings
    format color col_heading.
    write: /(18) 'Material #',
             (40) 'Description',
             (16) '  Beginning Inv.',
             (16) '       Purchased',
             (16) '  Available Inv.',
             (16) '     Ending Inv.',
             (16) '  Processed Inv.',
             (25) '                     Sold',
             (25) '                 Scrapped',
             (25) '              Transferred',
             (25) '            Cycle Counted',
             (25) '                    Other'.
    format color off.
    uline /1(278).
    ENDFORM.
          FORM F4_FOR_VARIANT                                           *
    FORM F4_FOR_VARIANT.
      CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
           EXPORTING
                IS_VARIANT          = G_VARIANT
                I_SAVE              = G_SAVE
                I_TABNAME_HEADER    = G_TABNAME_HEADER
                I_TABNAME_ITEM      = G_TABNAME_ITEM
              it_default_fieldcat =
           IMPORTING
                E_EXIT              = G_EXIT
                ES_VARIANT          = GX_VARIANT
           EXCEPTIONS
                NOT_FOUND = 2.
      IF SY-SUBRC = 2.
        MESSAGE ID SY-MSGID TYPE 'S'      NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ELSE.
        IF G_EXIT = SPACE.
          P_VARI = GX_VARIANT-VARIANT.
        ENDIF.
      ENDIF.
    ENDFORM.
    *&      Form  PAI_OF_SELECTION_SCREEN
          text
    FORM PAI_OF_SELECTION_SCREEN.
      IF NOT P_VARI IS INITIAL.
        MOVE G_VARIANT TO GX_VARIANT.
        MOVE P_VARI TO GX_VARIANT-VARIANT.
        CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
             EXPORTING
                  I_SAVE     = G_SAVE
             CHANGING
                  CS_VARIANT = GX_VARIANT.
        G_VARIANT = GX_VARIANT.
      ELSE.
        PERFORM VARIANT_INIT.
      ENDIF.
    ENDFORM.                               " PAI_OF_SELECTION_SCREEN
    *&      Form  VARIANT_INIT
          text
    -->  p1        text
    <--  p2        text
    FORM VARIANT_INIT.
      CLEAR G_VARIANT.
      G_VARIANT-REPORT = G_REPID.
    ENDFORM.                               " VARIANT_INIT
    INCLUDE ZQA_UTILITY_INCLUDE.
    ***INCLUDE ZQA_UTILITY_INCLUDE .
    *&      Form  display_popup_message
          text
    -->  p1        text
    <--  p2        text
    form display_popup_message using x_text1
                                     x_text2.
      data: int_popuptext like popuptext occurs 2 with header line.
      int_popuptext-text = x_text1.
      append int_popuptext.
      int_popuptext-text = x_text2.
      append int_popuptext.
      call function 'DD_POPUP_WITH_INFOTEXT'
        exporting
          titel              = 'Please Note'
          start_column       = 1
          start_row          = 1
          end_column         = 5
          end_row            = 3
        tables
          lines          = int_popuptext.
    endform.                    " display_popup_message
    *&      Form  upload_data_file
          text
         -->P_int_INPUTDATA  text
    form upload_data_file tables      x_inputdata
                          using x_filename like rlgrap-filename.
      clear x_inputdata.
      refresh x_inputdata.
    file on UNIX app server
      if x_filename+0(1) = '/'.
        open dataset x_filename for input.
        if sy-subrc <> 0.
          perform display_popup_message using 'Error opening file'
                                      x_filename.
          stop.
        else.
          do.
            read dataset x_filename into x_inputdata.
            if sy-subrc <> 0.
              exit.
            endif.
            append x_inputdata.
            clear x_inputdata.
          enddo.
        endif.
        close dataset x_filename.
      else.
    file on local PC of GUI
        call function 'UPLOAD'
          exporting
            filename                      = x_filename
            filetype                      = 'ASC'
          tables
            data_tab                      = x_inputdata
         exceptions
           conversion_error              = 1
           invalid_table_width           = 2
           invalid_type                  = 3
           no_batch                      = 4
           unknown_error                 = 5
           guint_refuse_filetransfer       = 6
           others                        = 7
        if sy-subrc <> 0.
          perform display_popup_message using 'Error opening file'
                                        x_filename.
          stop.
        endif.
      endif.
    endform.                    " upload_data_file
    *&      Form  check_background_processing
          text
    -->  p1        text
    <--  p2        text
    form check_background_processing.
    endform.                    " check_background_processing
    Reward Points if it is helpful
    Thanks
    Seshu

  • Material with PPM allow the date change

    Hi Experts,
    I have a issue regarding the date change in process order which is effected by the APO scheduling dates.
    Now i have observed that materials having PPM are not allowing me to change the dates even if i try manually.
    But Materials without it are easyily taking the dates in changed mode.
    My requirement is to change the date manually and APO should not effect the dates later on.
    Any timely suggestion will be rewarded .
    Reagrds
    Athilles

    Hi,
    In R3, check under "Adjust dates"  in  define scheduling parameters for process orders ( OPUZ) what is the setting defined.
    Try with different settings.
    Thanks,
    nandha

  • Regarding the Line Item Information in BEx

    Hi All,
    I am having an issue regarding the data in an InfoCube..
    According our report we need information from 0SD_C04. The information needed is Goods Issue Date, Actual Goods issue date, Quatity delivered, Quatity delivered lately, Quatity delivered on time.
    In R/3 we are having the data date wise at line item level. I am getting the correct information if a particular Material (1000 Qty) sold on a particular date.
    But if same material(1000 Qty)is sold on different dates then I am getting a Red X in BEx Report. How to get the date data at that level???
    Thanks in advance...
    Regards
    YJ

    Hi Arun,
    Sorry for the late response.
    I am having the following structure in R/3
    Material    Goods Issue Date  Act.g date     Del Qty
    100000070   20.08.2005        20.08.2005     1000
    100000080   20.08.2005        20.08.2005     1000
    100000080   21.08.2005        30.08.2005      600
    But in BW I am getting:
    Material    Goods Issue Date  Act.g date     Del Qty
    100000070   20.08.2005        20.08.2005     1000
    100000080   X                 X              1600
    If same material is delivered on different dates it is giving X in Report.
    I hope it is now clear to you.
    Regards
    YJ

  • Understanding the data storage

    Hello,
    In order to understand very well what happens regarding the data in the cube and in the relational database, here is a little scenario.
    Clould you please tell me whether my understanding is correct or not. Further precisions are welcome :
    If I send an amount (10 for example) in a based members intersection, the number 10 will be in the WB fact table (supposing that the table was empty just before) and in the WB partition.
    Now supposing, I change the amount, in the same intersection, I send the number 20. Thus, there will be 2 entries in the wb table with the same SIGNEDDATA to 10. 
    Are there also 2 entries in the WB partition in the cube or only one to 20 ?  
    After that, I run a lite optimization, now both the entries are in the FAC2 tables.
    Now If I send the amount 5 (still in the same intersection), there will be the amount -15 in the WB table. is it exact ?
    At this moment, what is the situation regarding the OLAP WB and FAC2 partitions ?
    If I retrieve the amount through a report, I asume that there will be a merger between the two fact tables in order to retrieve the right amount (ie 5 : 10 +10 -15), but I'm not sure.
    Also, as long as the data intersection concerned a based member, the retrieve is made from the relational database, Right ? The OLAP partitions are used when the data we want to retrieve concerned parent members? The retrieve will be made through MDX queries ?
    So, there is also a merger between the OLAP partitions in order to retrieve the right data ?
    Best regards,
    Lionel

    I think it is question regarding Microsoft OLAP database. I am not sure about the other OLAP database's behavior.
    Simple answers:
    If you send 10 and 20 to make it 20, you have 2 entries in WB table. Each entry has 10 for their own intersection.
    If you do lite optimize, your WB tables will be empty. And exact records will be moved to FAC2 table.
    If you send 5, your WB table will have 1 entry that has -15. Total number of record for that intersection is 3.
    However, number of records will not changed no matter what. Only exception is compress data during full optimize.
    That value, 5 from cube is by merge of three partitions - FACT, FAC2 and FACTWB. Normally, you do not need to care about table itself. SSAS will do it based on partition scheme.
    Data from relational database tables are correct in some cases such as WB partition. But if your WB partition is empty, data is from OLAP partition no matter it is base level or parent level.
    We are using some different way to lookup relational tables to get data faster and faster in BPC. But it is your own risk if you try to make something to lookup that tables directly.

  • Is there any limit (size of files or rows) to the data loading definition?

    Hi ,
    I have a query regarding the data loading pages.
    i have a file, size of 35KB (102 rows) which is not uploading .....its not even creating collections...
    But ,
    I uploaded files with more rows it got uploaded fine.
    I spited the the data in to two files and uploaded they worked fine .
    My questions are:
    1. Cant i upload file with more than 32K size.
    2. Is there any work around in apex to accept file whose size is more than 32K. Because its difficult to split data into small files and upload.
    Apex version: 4.1.1.00.23
    Thanks in advance.
    Thanks and Regards,
    K.Phani

    Hi PhaniKavuri,
    I'm not sure what your problem is, but I have uploaded data files with more more then 102 rows and much bigger then 32K.
    What's in the file? Did you try to upload this on apex.oracle.com, see if it's a local problem?
    Regards,
    Joni

  • Regarding fetching the data from Tcode FBL3N output list.

    Hi experts,
    I want to get the data from the FBL3N Transaction output to into my program by giving Company code G/L account number and Fiscal year as input to FBL3N tcode.
    Please guide me how to approach it its urgent.

    Hi Naveen,
    SUBMIT stdreport  EXPORTING LIST TO MEMORY
                  AND RETURN.
    With the above statement you can export the list out put and
    by using the below function module in the your program,
    CALL FUNCTION 'LIST_FROM_MEMORY'
      TABLES
        listobject = list_tab
      EXCEPTIONS
        not_found  = 1
        OTHERS     = 2.
    IF sy-subrc = 0.
      CALL FUNCTION 'WRITE_LIST'
        TABLES
          listobject = list_tab.
    ENDIF.
    Regards,
    Madhu.

  • Regarding reading the data from the files without using Stremas

    hai to all of u...
    here i have a problem where i have to read the data from the files without using any streams.
    please guide me how to do this one,if possible by giving with an example
    Thanks & Regard
    M.Ramakrishna

    Simply put, you can't.
    By why do you need to?

  • Regarding how to pass the data from web dynpro to workflow

    hi gurus,
    how to pass the data from web dynpro to workflow.
    Regards
    vijay

    Check this [thread|SAP_WAPI_START_WORKFLOW;

Maybe you are looking for