Regarding the Workflow definition 'WS10000051' not in version '0001'

Hi,
iam using the worklow template WS10000051 and when try to view the workflow builder it 's giving error " Workflow definition 'WS10000051' not in version '0001"
please let me know the solution!!
it's very urgent!!
thanks
ram

Prasath Natesan wrote:Did u check the URL provided by me in the previous post. Below is one of the responses in that thread!
>
>Are you in ECC 6.0? check note 981295 and the below message.
>
>incomplete / missing workflow on ECC 6.0
>
>Thanks,
>Prasath N
Check this note and also check out various other options provided by others.
Thanks,
Prasath N

Similar Messages

  • Workflow definition 'WS50000041' not in version '0000'

    Hi ,
    The template WS50000041 is not in client when I execute the FM - SWD_WFD_REPLICATE_FROM_9999 input parameter as the workflow ID WS50000041which is missing.and see through Workflow bulider the version is keep on generating with undefined step.How to get the Original template
    Thanks and Regards,
    Sabari

    Hello,
    Have you looked on OSS? Someone had the same problem a few years back and said OSS 981295 solved it.
    Maybe there's an updated note.
    regards
    Rick Bakker
    Hanabi Technology

  • Getting error u201CWorkflow definition 'WS04200009' not in version '0000'u201D

    Hi all,
    I have a requirement where I have to use/ enhance the standard HR workflow template WS04200009 for leave approval.
    The problem is when I click on Workflow Builder in PFTC, its giving the following error  :-
         u201CWorkflow definition 'WS04200009' not in version '0000'u201D.
    SAP has given details for this error like this:-
         u201CWorkflow definition 'WS04200009' not in version '0000'
      Message no. WD401
    Diagnosis
    The workflow definition with the ID WS04200009 in version 0000 could not be read from the database.
    System Response
    The call to the Workflow Builder had to be cancelled.
    Procedure
    Refer to your workflow system administrator.u201D
    Secondly, I tried to copy this standard workflow template to a custom one.
    But here also, its copying only the Workflow  Container elements, workflow template is not coming.
    Please guide me what can be the solution.
    Regards
    Navjot Singh.

    Hi Navjot.
    We faced the same issue, and need to apply the OSS note - 962488. (Recommended by SAP). After applying the note you need to execute the FM - SWD_WFD_REPLICATE_FROM_9999 input parameter as the workflow ID which is missing.
    Hope this will be helpful for you. All the best.
    - Mohan Vamsi

  • Getting dump during opening the workflow definition

    Hello Experts
    I created one Workflow 2 months before and it was working fine till yesterday. when I check the workflow definition by clicking on push button 'Workflow builder' from transaction 'PFTC', I got dump.it is not opening workflow definition.
    I tried to open the workflow definition is from transaction 'SWDD' but I got dump from there as well.
    the short text of the short dump is  'Access via 'NULL' object reference not possible'
    I check the tables and all the steps included in workflow is present.
    Could you please let me know what could be the issue and how can I resolve it.
    Thanks in advance for your help.
    Edited by: Vibhor Goyal on Jan 11, 2011 11:50 AM

    Hi Vibhor,
    Is this issue happening with all the users trying to open this particular workflow?
    If this is a user specific issue, then it could be authorization or roles related. Else it could be more serious than it looks like.
    Also, check with the basis team if there were any OSS notes / patches applied in the system since yesterday which could have resulted in this issue.
    Hope this helps!
    Regards,
    Saumya

  • Error : Workflow definition does not exits(T-code : SWU7 )

    Hi All,
    I checked my workflow template in SWU7 .Its gives me error "Workflow definition does not exits".
    In the bottom left of screen it displays message : "Container Element ZBUS2081 is not used".
    How can remove this error ? Please help..

    Hi ,
    The method used is standarad "GETEMAILDATA".
    no changes have been done to this.
    In bindings(exist)
    Workflow                                                        Step 'Get data from Email'
    &INCOMINGINVOICE.PAYMENTBLOCK&         &PAYMENTBLOCK&
    Then in Containers tab{ other tabs include basic data,description,triggering events,terminating events,defualt values,sapphone)
    this expression have been defined :
    abap dict. refernce : RBKP-ZLSPR
    PROPERTIES : IMPORT,EXPORT and MANDATORY.
    The BO name is ZBUS2081
    For BOR ZBUS2081
    bus2081.PaymentBlock  datatype refernce : RBKP-ZLSPR
    method defined :bus2081.BlockedPriceCheck
    Kindly check if fine.
    Edited by: ujjwal dharmak on Nov 22, 2010 9:14 PM

  • The WSDL definition could not be parsed.

    Hi All,
    I am trying to import a Web Service into a Flex project.
    In the first step it will parse the wsdl file and fetches me all the operations of the service. But when i click on the Finish button
    it gives me this error message "The WSDL definition could not be parsed. The wizard could not complete successfully."
    I am using Flex Builder 3, CE 7.1 EHP1.
    Any help on this would be appretiated.
    Thanks,
    Sudheer.

    Hi Sudheer,
    Refer these bug reports :
    http://bugs.adobe.com/jira/browse/SDK-13924
    http://bugs.adobe.com/jira/browse/FB-10541
    http://bugs.adobe.com/jira/browse/FB-13686
    Regards,
    Vivek

  • Verifying the Workflow Configuration - does not appear for the workflow services.

    hi!
    the services for the workflow services is not in windows service, I´ve installed workflow manager and correctly configured, service bus correctly configured etc
    verify

    Which self Service function you are using to change the assignment ?
    Their are two API to update asg values. Try to apply user hook on both of them and retry ur scenario.

  • Bought updating the fireworks CS6 but not earlier versions what to do?

    bought updating the fireworks CS6 but not earlier versions what to do?

    Not a lot that you can do about it - except returning the CS6 update, and getting the full version. Do remember that Fireworks is no longer developed by Adobe, and is effectively a "dead" application. You may want to invest your money in alternative software.
    Alternatively, try to seek out a legit copy of CS5, and update that one. You might be successful on ebay - but there are a lot of illegal versions on sale on ebay, unfortunately.

  • Dynamically-related files could not be resolved because the site definition is not correct

    Hello
    My name is Doron and I am a graphic designer
    I design with Dreamweaver and I want to connect the WordPress to Dreamweaver
    I have a WINDOWS OS 7 64 bit,  so I installed Apache Software WampServer 64
    I set up WordPress and connected to Dreamweaver but
    when I run the index.php and click on discover dynamically-related files.
    I got an error:
    " dynamically-related files could not be resolved because the site definition is not correct "
    I did everything ok I do not know what the problem
    I would love to get help connecting Dreamweaver with WordPress
    that they could work together so I can continue to learn WordPress
    Thanks in advance
    doron

    The only WP files you should be looking at are in your WP Themes folder.  Everything else is off limits. See links below:
    WordPress theme - The Anatomy, an Infographic - Yoast
    Theme Development « WordPress Codex
    DW is only useful for customizing your Theme.  Once WP is deployed on your web server, you must use WP's online Dashboard to maintain it.
    Dashboard — Support — WordPress.com
    Administration Screens « WordPress Codex
    Nancy O.

  • Queries regarding the workflow

    Hi guys
    I have created a workflow definition in SWDD and creted a object in SWO1 with an event. this event i linked to the workflow in tepe linkage table also. I tried to trigger the event from the abap report program .I have used standard FM SWE_EVENT_CREATE. I have added the FM SWW_WI_CREATE_VIA_EVENT as the receiver FM in the event.
    But still when i run the report i can not see this event in event trace. When i debugged the program i have found that the Event id is generated by the FM SWE_EVENT_CREATE.
    Do i have to add anything to the program or anything to be added to the event. PLease let me know
    thanks
    sankar

    hi
    i am giving my code here:
    REPORT  ZEMPWORKFLOW.
    PARAMETERS : empid type ZEMPID obligatory,
                 empname type ZEMPNAME obligatory,
                 empDOB type ZEMPDOB obligatory,
                 empcont type ZEMPCOUNTRY obligatory.
    INCLUDE <cntn01>.
    DATA: objtype LIKE swetypecou-objtype,
          event   LIKE swetypecou-event,
          objkey  LIKE sweinstcou-objkey,
          eventid LIKE swedumevid-evtid,
          creator LIKE swhactor.
    objtype = 'ZEMPLOYEE'.
    event = 'UPDATE'.
    clear objkey.
    objkey(10) = empid.
    swc_container z_container.
    swc_create_container z_container.
    swc_set_element z_container 'empid' empid.
    swc_set_element z_container 'empname' empname.
    swc_set_element z_container 'empdob' empDOB.
                 CALL FUNCTION 'SWE_EVENT_CREATE'
                   EXPORTING
                     OBJTYPE                       =  objtype
                     OBJKEY                        =  objkey
                     EVENT                         =  event
                 IMPORTING
                    EVENT_ID                      =  eventid
                 TABLES
                    EVENT_CONTAINER               =  z_container
                 EXCEPTIONS
                    OBJTYPE_NOT_FOUND             = 1
                   OTHERS                        = 2.
    IF sy-subrc = 0.
    COMMIT WORK.
    WRITE:/ 'Your event was created.'.
    ELSE.
    WRITE:/ 'There was an error creating the event.'.
    ENDIF.
    please tell me if you need any more info.
    thanks
    sankar

  • Regarding the workflow notification page customization

    Hello Everyone...
    I am new to Oracle OAF...
    Customize the Oracle Workflow Notifications page (for Open Notifications) by using OA Framework Customization (to display more details on the Notification)
    what is solution for this component?
    could someone help me out in this task plz...

    You need to check how the notifications are getting created. Please download the workflow from instance and check the logic of the notification creation. That should give ideas on customizations involved.
    Regards
    Sumit

  • Regarding the Site Definition in Sharepoint 2010

    Hi Forum,
    I am working on sharepoint 2010,
    I created SiteDefinition through visual studio in Sharepoint 2010, after deploy in sitedefinition.
    I got new features to add in that existing sitedefinition.Can you please tell me how to proceed.
    I am thinking i can use FeatureStapling or any other way?
    please assist me regarding this issue.
    Rama

    Hi Rama,
    Feature Stapling  is the great way if the site definition is already in use (and sites have been created).
    The following articles for your reference:
    http://blogs.msdn.com/b/kunal_mukherjee/archive/2011/01/11/feature-stapling-in-sharepoint-2010.aspx
    http://www.codeproject.com/Articles/626731/Feature-Stapling-in-Sharepoint
    Best Regards
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Why does Test-EcpConnectivity throws a warning regarding the internal URL property not being set, when in fact it is set?

    Hello,
    I have setup an Exchange 2013 CU6 environment which contains the following:
    1 machine with client access role
    3 machine with mailbox role
    1 machine with both client access and mailbox server role.
    When I run the Test-EcpConnectivity against the machine which has both roles I get the following:  
    WARNING: The test couldn't test the internal URL of this virtual directory, because the InternalURL property isn't set.
    But when I run "Get-EcpVirtualDirectory|fl" against the same machine, it shows that internal url property is set.
    Why is this happening and how can it be solved?

    Hi,
    The Test-OwaConnectivity cmdlet has been deprecated. It is recommended to use the
    Get-ServerHealth cmdlet to monitor server state.
    Regarding the parameter of Get-ServerHealth
    http://technet.microsoft.com/en-SG/library/jj218703(v=exchg.150).aspx
    Refer to this similar thread
    https://social.technet.microsoft.com/Forums/en-US/e952a854-647e-4f88-b54c-449c82c1c82e/testowaconnectivity-fails-cannot-find-internalurl-property?forum=exchangesvrdeploy
    Best Regrads.

  • [SOLVED] Creating PKGBUILDS where the source URL does not have version

    I am trying to create a a PKBUILD for idevsutil which is provided by IDrive for backing up into their cloud. The archive provided by them contains just a binary and a readme. Now the source URL, http://evs.idrive.com/download/download … inux64.zip does not include the version number. So looks like they are updating the same file for every version. In case they update the version the checksum should fail which should prevent mismatch in dev versioning and what gets installed. But are there any best practices for such cases when we write PKGBUILD?
    Last edited by nsmathew (2013-12-28 16:22:02)

    Trilby wrote:
    The content provided by the source url for version-control packages is also always changing, yet the PKGBUILDS don't need to.  The key for these is to use the 'SKIP' entry in the checksum variable.  The packages must also have the version control system appended to the title (eg package-git).
    You certainly could make a package-dev which skipped the checksum.  However, this would mean user's of the PKGBUILD would be downloading a random unchecked binary from someone's idrive site.  This seems like a very bad idea.
    My idea was to not allow for the installation of the software if the upstream version changes which the checksum should take care off. Will then update the PKGBUILD with the new version and checksum.
    In terms of the binary, it is the officially provided binary by IDrive and the URL points to the same.
    graysky wrote:Don't think you can do much with that.  I would send an email requesting a versioned archive explaining that you are packing their software for a linux distribution.
    I have already requested for the license info on their dev forums, let me also check with them if a versioned archive is available. Thanks.

  • Error opening the workflow WS04200009

    Hi all,
    I am trying to open the ESS leave request workflow WS04200009 from eiter swdd ot from PFTS but it gives me the following error:
    Workflow definition 'WS04200009' not in version '0000'
    Message no. WD401
    Diagnosis
    The workflow definition with the ID WS04200009 in version 0000 could not be read from the database.
    System Response
    The call to the Workflow Builder had to be cancelled.
    Procedure
    Refer to your workflow system administrator.
    Please tell me what could be wrong???
    Thanks

    Have you checked OSS for applicable notes?
    I know you have not checked this forum to see if this question has already been answered, because I know it has. So perhaps you should try those two appraches first?
    Not that I mind you giving people the opportunity to earn some additional points, but it is boring to read the same questions over and over again. And I also think that out of respect for other people's time, and the community guidelines, you ought to at least search the forum before posting your question.

Maybe you are looking for

  • FDM Import Script

    Hi, i'm new making import scripts to FDM. I m making an integration script between SAP and FDM. I m getting information from via web FDM, the problem is when i a m trying to add this information to the workTable. The code is as follows: for i = 0 to

  • Adobe Acrobat Pro crashes on open since Mavericks update

    since installing mavericks, i am unable to open adobe acrobat. to be really specific, the app itself starts, but crashes immediately when attempting to open a PDF file. the text of the problem report is pasted below. any assistance would be appreciat

  • How to create .pdf file on a button click using forms

    Hi I want to create a .pdf file. Could you please tell me how can I do that? regards

  • What happens after player starts

    Hello, When a JMF player is started, what exactly happens? I presume it reads a particular number of frames from the video into some internal buffer and then display them on the screen depending on the frame rate. What is the correct mechanism? Also

  • Please review proposed setup.

    Hey, just wondering if someone can look over the setup i'm thinking about putting together.  Basically, I'm going to upgrade myself and give my GF my 2500+/A7N8X. - MSI K8N Neo2 Platinum Motherboard - Athlon 64/3200+/Socket 939/Winchester 90nm Core -