Regarding: to pass inputs to query

Hi gurus,
I want to know whether there is any technique to pass inputs to a query from another query other than RRI. let me explain there are 2 queries 1 and 2 . 1st query displays say top 10 customers now 2nd query displays detailed info of top 10 customers, now when we execute 2nd query, 1st query must execute in background and those top ten customers from 1st query must be the inputs for the second query
Please help me
thanks in advance.
Kumar

Hello Kumar,
Creating the Web template in WAD would the better solution in your case.
When you will perform the selections for report 1, it would be directly affecting the data-provider which is same for both reports 1 and 2 in your case.
so the second report will get automatically adjusted according to the selection criteria set for first report and you will get the desired out of detailed report on the parallel to the summary report 1.
Regards
Pratap Sone

Similar Messages

How to set the table input in Query template?

Hi all.
I need to call a Bapi_objcl_change, with import parameter and a table as an input. I have done this, in BLS. I have set the table input in the
form of xml. In BLS, I get the output(the value gets change in SAP R3, what i have given in BLS). But if i set the same xml structure in
query template, I didn't get the output. Table input parameter does not take that xml source. How to set the table input in Query template?
can anyone help me?
Regards,
Hemalatha

Hema,
You probably need to XML encode the data so that it will pass properly and then xmldecode() it to set the BAPI input value.
Sam

Issue in passing inputs to concurrent program

Hi all,
I am using ECEPOO(out:purchase order ) to extract approved PO data.The concurrent program asks for output file path as one of its inputs.
When I pass the file path to it ,the concurrent program fails saying *'INVALID_DIRECTORY_PATH'*.
I dont know what is the right file path format to be passed.I need to know what is the format for the file path.
Help me with your suggestions and example formats.
Thanks n regards,
Goutham R

you can find the path by looking for any previous concurrent program which ran successfully.
one way of doing that is from the Submit Request window , set the days to 500 say and serach for all request with same request name.
Now select any of the request whhich has completed successfuly and from details get the parameter passed to that query.
Other way is
select fcpt.concurrent_program_id conc_prog_id
from apps.fnd_concurrent_programs_tl fcpt
where user_concurrent_program_name = <Conc prog Name>;
Now from above query use the concurrent_program_id in below query :
select fcr.*
from apps.fnd_common_requests fcr
where fcr.concurren_program_id = conc_prog_id

How can I do this input help in the Input ready query

Dear all,
Do you konw this function?
The following steps is that:
1,I create the Input ready Query.
2,I can insert the new record.
3,I can use the input help for the characteristics.
4,When I double the space, I got the pop-up for input help.
5,I want to get the function is that:
for example:
char1 is the char2 attribute.
char2 - - - - - - - -- - char1
m- - - - - -- -- - - - -a
n-- - - - -- - - - - - a
u- - - - -- - - - - - - -a
v- - - - - - - - - - - -b
w- - - - - - - -- - - -b
x- - - - - - - - - - - - b
when I write the "a" for the char1 in the new record at input ready query, I only want to got "m","n","u" for char2 from the char2 input help.
How can do it?
Thank you so much.
Best regards,
Leon

Hello Leon,
As you have already set char1 as an attribute of char2, what you would need to do is create an attribute variable for char2 of type exit.
Using a variable exit, you can pass the value of char1 to char2. This would then automatically restrict the selection list to "m", "n", "u" as values for char2 when you enter "a" as the value for char1.
Hope this helps.
Sunil

Input ready query is not showing loaded data in the cube

Dear Experts,
In Input ready query we have problem that it is not showing the values which was not entered by throught hat query. Is any settings in input ready query that we can do to populate the loaded data on the cube as well as data entered through Input ready query itself.
Thanks,
Gopi R

Hi,
input ready queries always should display most recent data (i.e. all green and the yellow request). So you can check the status of the requests in the real-time InfoCube. There should exist only green requests and maybe at most one yellow request.
In addition you can try to delete the OLAP cache for the plan buffer query: Use RSRCACHE to do this. The technical names of the plan buffer query can be found as follows:
1. InfoCube\!!1InfoCube, e.g. ZTSC0T003/!!1ZTSC0T003 if ZTSC0T003 is the technical name of the InfoCube
2. MPRO\!!1MPRO, e.g. ZTSC0M002/!!1ZTSC0M002 if ZTSC0M002 is the technical name of the multiprovider
If the input ready query is defined on an aggregation level using a real-time InfoCube, the first case is relevant; if the aggregation level is defined on a multiprovider the second case is relevant. If the input-ready query is defined on a multiprovider containing aggregation levels again the first case is relevant (find the real-time InfoCubes used in the aggregation level).
Regards,
Gregor

Filters not getting passed in MDX query while using SAP BW with OBIEE

Hello,
I've been working on OBIEE with SAP BW as back-end. I've created some reports & those are working fine when there is less amount of data. But when I try to run a report with 3 dimensions & 1 fact it throws an error saying "No more storage space available for extending an internal table". When I checked MDX query, I found that the filters that I had applied to request & also selected from prompts are not getting passed in that query. So, I tried running a simple request using a simple filter in Answers. Although this request returns results but I can't see filter conditions in query. MDX query always show crossjoin but I can't see filter conditions anywhere.
Is it the normal OBIEE behaviour OR am I doing something wrong in there? Can you please help me out with this?
Thanks,
Rocky

Hello Sainath,
We tried those things. But it is still giving same error.
State: HY00. Code: 10058. [NQODBC][SQL_STATE:HY000][nQSError: 10058] A general error has occurred. XML/A error returned from the server: Fault code: "XMLAnalysisError.0X80000005". Fault string: "The XML for Analysis provider encountered an error: MDX result contains too many cells (more than 1 million)". (HY000)
The problem here, I think, is the filter parameters are not getting passed in the MDX query. Any idea why would that happen? Is there any setting to do so?
Thanks in advance for help.
Regards,
Rocky

Input ready query and display only rows

I am trying to replicate scenario which is equivalent to creating manual layout in SEM-BPS with settings for layout category - Key Figures in Data columns, and rows defined individually. In this version it is possible to restrict certain rows as comparision only.
How can I acheive this using Input ready query? In my query I have created a strucure for Planning Items, but I am not able to show certain planning item selections as display only.
Any thoughts?

Hello Gregor,
Thanks for you answer.
I already have two structures as mentioned by you.
Can you please let me know what exactly you meant by set the input flag on the cell level? What settings I have to change to set the flag, do I have to use any formula? In my example I have three rows for Planning item row structure and I want only one row to be selected as display only row.
Regards,
Sachin

For new entries pass input screen values to PBO of maintenance view

For maintaining Z table using a customized program with selection screen and FM   'VIEW_MAINTENANCE_CALL' is called . Its working fine for selecting existing entries as per selection screen values. In case if there is no entry found as per input values the maintenance screen comes blank with "No entries found that match selection criteria".
Instead of this want to pass input screen values on maintenance view if no entry is found thru PBO selection screen. The total & extract tables are empty. No suitable event is found. How this can be done.
Thanks
pt

You could try in a first step to read database to check existence :
CALL FUNCTION 'VIEW_GET_DATA'
EXPORTING
    view_name   = 'ZXXXX'
TABLES
    dba_sellist = it_sellist
    data        = data
EXCEPTIONS
    OTHERS      = 1.
If data found, call the view maintenance
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
    action      = 'U'
    view_name   = 'ZXXXX'
TABLES
    dba_sellist = it_sellist.
else create one new record providing required value in a work area
CALL FUNCTION 'VIEW_MAINTENANCE_SINGLE_ENTRY'
    EXPORTING
      action               = 'INS'
      view_name            = 'ZXXXX'
      insert_key_not_fixed = ' ' " if full key provided
      no_transport         = 'X'
    TABLES
      dba_sellist          = it_sellist
    CHANGING
      entry                = wa_zxxxx
    EXCEPTIONS
      OTHERS               = 1.
Regards,
Raymond

Key Figure in a Input Ready Query

I have 9 key figures in my input ready query. 5 of them are not input ready and being loaded through a job and 4 are input ready. There is a problem with one key figure, I am able to see data for the key figure when i have START QUERY IN THE CHANGE MODE turned off. But once I turn it on it is not showing any data for the key figure. This is happening only wiht that key figure, all the other key figures are working fine. Could someone help fixing this
Thanks
Rashmi.

Hi,
I do face this type problem during my BI IP implemenation project. Pls chk thoroughly the following points.
1.The planning mode of your real-time infocube should be on always on( you need change from load to planning mode, while inputting data).
2.The START QUERY IN THE CHANGE MODE , should be on.
3.In the planning tab of key figures, ensure you enable the button : Data can be changed using planning functions.
4.In the advanced tab of key figures, pls make sure to enable the right button( Master data).
5.Pls make sure , the real time infocube, aggregation levels, filters etc, should be refreshed & active,if make any changes in planning model in between, in Aggregation levels,filters etc.
6. Pls chk the locks( SM12) always, and delete all of them, if any.
7. Log-off the Server (BEX/DWWB) and restart the BEX ,then open your Input query, it should work .
Regards
CSM Reddy

How to pass input value to the IN parameter in a function

Hi ,
I'm new to pl/sql programming.
The below function is used inside a package and the package is invoked in visual studio.
The function uses 2 input parameters.
Out of which 'in_report_parameter_id' value comes thru job processor service 's job request.
The second IN paramter values are hard coded in the function.
I'm not able to understand this.
If the values are hard coded , how to make sure that only the hard coded values are the right ones?
Please anyone could explain to me?
I really dont have good idea about how to pass INPUT parameter to the functions or procedure
Is there any nice document which could give me good understanding about what are the ways or types we could pass values to the input parameter in subprograms?
thanks in advance.
CREATE OR REPLACE FUNCTION get_class_text_str
     in_report_parameter_id IN NUMBER,
     in_which                IN VARCHAR2 DEFAULT 'SELECT'
RETURN VARCHAR2
IS
         end_text            VARCHAR2 (50)   := '';
         my_class_text_str VARCHAR2(10000) := '';
         my_class_value_str VARCHAR2(10000) := '';
     CURSOR class_text(c_1_text VARCHAR2, c_2_text VARCHAR2) IS
     SELECT c_1_text || report_parameters.report_parameter_value
                           || c_2_text
                           || report_parameters.report_parameter_value
                           || '" '
      FROM report_parameters
     WHERE report_parameters.report_parameter_id     = 3690
       AND report_parameters.report_parameter_group = 'CLASS'
       AND report_parameters.report_parameter_name   = 'CLASS'
GROUP BY report_parameters.report_parameter_value
ORDER BY CAST(report_parameters.report_parameter_value AS NUMBER);
BEGIN
     IF (in_which = 'SUM') THEN
          OPEN class_text ( 'SUM(NVL("Class ', '", 0)) "Class ' );
     ELSIF (in_which = 'PERC')THEN
          OPEN class_text ( 'ROUND((("Class ', '" / "Total") * 100), 2) "Class ' );
          end_text := ', DECODE("Total", -1, 0, 100) "Total" ';
     ELSE
          OPEN class_text ( 'SUM(DECODE(bin_id, ', ', bin_value, 0)) "Class ' );
     END IF;
     LOOP
          FETCH class_text INTO my_class_value_str;
          EXIT WHEN class_text%NOTFOUND;
          my_class_text_str := my_class_text_str || ', ' || my_class_value_str;
     END LOOP;
     CLOSE class_text;
     my_class_text_str := my_class_text_str || end_text;
     RETURN my_class_text_str;
END get_class_text_str;
/Edited by: user10641405 on Nov 19, 2009 8:16 AM
Edited by: user10641405 on Nov 19, 2009 8:30 AM

This is not a design I would use, but should work if coded properly. I would probably build a reference cursor query as text and use one open fetch and close.
You have 2 input parameters, in_report_parameter_id and in_which. I could not find where in_report_parameter_id was used in the program, but the value passed in for in_which is being used in IF logic to decide how to open the cursor. After the cursor is open rows are being fetched and eventually the cursor is closed.
The values in_which are compared to are hard-coded. It is the programmer's job to make sure the values listed are the right values and the actions taken are also correct. Your program is assuming that if the first 2 values are not encountered the third one listed is the one you want.
To pass input values to a procedure you merely provide the values as a literal or variable in the call, something like
whatever := get_class_text_str(1,'SELECT');

How to create an Input Ready Query in Bex Excel with no transact data

Hi
We created a query where we want the user to put in NEW LINES. This query has in general no data when user starts planning.
We have 2 front-ends for this, Bex Web and Excel. Both shows initial 'no data available
BexWeb': Implementing the command set_data_entry_mode we get all the relevant columns for the input
Excel: Command set_data_entry_mode or set_input_mode does not allow the users to insert new lines. Still error message pops up 'no data available'
Do you have a solution for that ?
Regards,
Thomas

Hi Gregor,
In the note 1149346 that you have mentioned, it says -
You must start the input-ready query in change mode.
BEx Analyzer: In the properties of the analysis grid, the switch
"Suppress new rows" must not be set. Furthermore,
the switch "Allow entry of plant values"
must be set in the local query properties.
I have not seen this setting Allow entry of plant values in a query - can you tell what is refers to?

Input Ready Query, Variable read mode setting Only Values for InfoProvider

Hi,
I have a problem with Selection Variable for a BEx Query :
- I'm working with SAP BI 7.0 support package 15
- My query is an input ready query built for an "aggregation level" based on "real time infocube" (Planning);
- Characteristic, I want to filter with variable, has query property Advanced->Query Execution for Filter Value Selection = Only Values in InfoProvider
- Characteristic (info-object) has set the property: Business Explorer tab--> Query Def. Filter Value Selection as Only Values in the info-provider...
My problem is:
when I execute a query,
the Select Values for Variables screen appears
I push on the Select from List button
and Select Values For MyCharacteristic appears...
but it shows me all values in master data table of my characteristic instead of only values in the infoprovider!!!
If I build a query for the Real Time Cube it works correctly, but if the query is built for the aggregation level it doesn't work!
Could someone explain me why it doesn't work correctly?
Thanks in advanced
Fede

Thanks to Mariana Lazar
30.03.2009 - 12:30:36 CET - Risposta by SAP
Dear Fede,
Regarding the query built on aggregation level please note the following
the aggregation level is always a Virtual Provider built other
InfoProvider and hence it does not have the dimension table and hence
the F4 mode D is not supported.
Therefore when aggregation level is used in a query, F4 does not supportD-mode: 'Only Values in InfoProvider' and all master data values are
displayed in the value list.
Reference from the note
984229 F4 modes for input help as of SAP NetWeaver 2004s BI
4. Since other InfoProviders do not have a dimension table, the system
displays only posted values if you select "Only Posted Values for
Navigation". Otherwise, it displays the values from the master data
table.
Hope this should clarify your doubts. Please let me know if you have
questions else please confirm the message at your earliest convenience.
Thank you for your cooperation and kind regards,
@KR@ Mariana Lazar
Senior Support Consultant
SAP Active Global Support
Netweaver Business Warehouse

How to get Input-Ready Cell Value of Input Ready Query?

Hi,
How to get input ready cell value in fox formula?
for example :
In Input-Ready Query,
C_Code Month Psale(input ready)
1000 05.2012 800
now i want Psale 800 in fox formua before value save in cube,
is it possible?
Thanks
Ravi

Hi,
as I understand your requirement: you want to execute a planning function before 'save'. This possible, cf. note 1356805
for more details.
Regards,
Gregor

Syntax error when creating input-ready query

Hi,
When creating an input-ready query, I set the key-figure to 'Data can be changed by user entries or Planning Functions' in the Planning Properties in the query designer.
When I execute the query, I get the following error:
Syntax Error in : CL_RSR_RRK0_KEYFIGURE
In se24, the class has a syntax error in its Constructor method.
The error is not occuring when I change the Planning property to 'Data Cannot be changed' or 'Data can be changed via Planning Functions'.
Has anyone encountered such an error. If yes, how to proceed further?
Anything do with the the ABAP Patches. Currently I am in Patch13.
Thanks,
Balaji

Hi,
Plz apply the notes 1042924 and 1043103.After appling the notes regenerate the
query.
This should solve the error.
Regards,
Srikanth.

How to set input ready query to display mode as default when open workbook?

Dear All,
Hi, i have a question here about IP query.
as my current situation, my workbook included one input ready query, therefore, when i open my workbook which default is Edit mode which mean all value can be edited.
but, i want it to display mode when open workbook, and i already have a edit button, if i want to edit the value i will use Edit button, so, i wan it as display mode when i first open workbook.
so, can anyone tell me how to set it as display mode when open workbook which included input ready query?
Regards
wenlong
Thanks a million

in Data Provide Specfici commad
Edit
Dsiplay
Filter command
Assigen Query /Query view
pls select Edit then save

Regarding: to pass inputs to query

Similar Messages

Maybe you are looking for