Regarding unicode issue in upgrade
Hi,
DATA: BEGIN OF ESCAPE_TRICK,
X1(1) TYPE X value '1C'.
END OF ESCAPE_TRICK.
DATA: BEGIN OF ESCAPE_TRICK1,
X1(1) TYPE X value '13'.
END OF ESCAPE_TRICK1.
can u please tell replaced declaration for above code in unicode systems as type x is not allowed.
regards,
sandeep.
Hi,
Try checking this way..
DATA: BEGIN OF ESCAPE_TRICK,
X1(2) TYPE c value '1C'.
END OF ESCAPE_TRICK.
DATA: BEGIN OF ESCAPE_TRICK1,
X1(2) TYPE c value '13'.
END OF ESCAPE_TRICK1.
check changing as stated above...
Hope this would help you.
Good luck
Narin
Similar Messages
-
Regarding unicode issue(UCCHECK- MESSAGEG-G error code)
hi guys,
I have below error in UCCHECK error analysis.
The length declaration "138" exceeds the length of the character-type start
(=43) of the structure. This is not allowed in Unicode programs . . . . . . .
In the source code.
MOVE EUDB_1(148) TO ATTCHK.
used like this.
EUDB_4 is Struc having 18 fields, ATTCHK is also struc having 1field length 211.
How to solve this problem.
Regards
AmbichanHi Yogita,
write in this way,
data ls_rgumd type rgumd.
data ls_glu1 type glu1.
*create new structure ls_glu1_c
*with all the fields type c and length of the as in structure glu1
*like i have shown below.
type begin of ls_glu1_c,
RCLNT(3),
RLDNR(2),
RRCTY(1),
end of ls_glu1_c.
*now pass the ls_glu1 structure to ls_glu1_c.
ls_glu1_c = ls_glu1.
*then
LS_RGUMD-RECORD_KEY = LS_GLU1_C.
try this way it should help you.
Ali -
Hi
I have one statement " SET FUNCTION TRACE OFF.
can you please tell the replaced statement in ECC 6.0.
Its very urgent...please help me.
Regards
Sandeep reddy.Hi,
Try checking this way..
DATA: BEGIN OF ESCAPE_TRICK,
X1(2) TYPE c value '1C'.
END OF ESCAPE_TRICK.
DATA: BEGIN OF ESCAPE_TRICK1,
X1(2) TYPE c value '13'.
END OF ESCAPE_TRICK1.
check changing as stated above...
Hope this would help you.
Good luck
Narin -
Could you pls give the details about the Unicode conversion during Upgrade
Hi,
Can anyone give details about the Unicode conversion during SAP Upgradation fro 4.6C to ECC6.
Waiting for quick response
Best Regards,
PadhyHi,
These are the few points i gathered during my upgradation project.
Before starting any upgradation project, it is necessary to take up the back-up of the existing systems. As we are going to upgrade the entire system, we will be changing so many things and if something happens, without back-up, we will be in a trouble.
So it is advised to keep a back-up of the existing system.
Say for example we have the existing system E4B which is of Version 4.6C. Now we want to upgrade it to Version 4.7. Let us see how we can do it.
Version upgrades not only means that we need to run the new Version CD over the existing Version System but only involves some other thing.
Version Upgrade involves the following Steps.
Say we want to upgrade for Version 4.7 from Version 4.6, which is in the System E4B. Now we created one more system called as E1B in which the upgradation for Version 4.7 can be done.
First copy the entire E4B system into the E1B System which is created for Version 4.7.
Apply the Version 4.7 CD provided by SAP over the E1B System.
Now check whether all the functionalities that was in E4B system works fine with E1B system also.
Thus the Version Upgrade involves two steps.
1. SAP Upgradation with the help of the CD
2. Manual Upgradation.
1. SAP Upgradation with the help of the CD
This is nothing but after taking the copy of the existing system into a new system, the upgradation CD from SAP is applied over the new system.
2. Manual Upgradation.
This Manual Upgradation involves
2.1 Upgradation of Standard Objects
2.1.1 SPAU Objects
2.1.2 SPDD Objects
2.2 Upgradation of Custom Objects.
Upgradation of Custom Objects can be placed under the following three categories.
Unicode Compliance
Retrofit
Upgrade
Please Find below some of the common Unicode Errors and their solutions
1. Error:
In case of Translate Error; Dangerous use of Translate in Multilingual system.
Correction:
To correct the Error occurring on TRANSLATE statement use this additional statement before the Translate statement.
SET LOCALE LANGUAGE sy-langu.
This statement defines the Text Environment of all the programs & internal sessions in the language specified in the LANGUAGE KEY, which in this case is sy-langu, i.e. the log on language of the user.
2. Error:
In case of Open Dataset Error; Encoding Addition must be included.
Correction:
This Error occurs only when the MODE is TEXT.
To correct the Error occurring on OPEN DATASET statement use this statement instead.
OPEN DATASET dataset_name FOR access IN TEXT MODE ENCODING DEFAULT.
Where: dataset_name NAME OF THE DATASET.
Access INPUT or OUTPUT or APPENDING or UPDATE.
DEFAULT - Corresponds to UTF-8 in UNICODE systems &
NON_UNICODE in NON-UNICODE systems.
3. Error:
In case of the usage of the Obsolete FM UPLOAD/DOWNLOAD or WS_UPLOAD/DOWNLOAD; Function module UPLOAD is flagged as obsolete.
Correction:
The FM GUI_DOWNLOAD/UPLOAD is used.
The variations to be made in the parameters of the FM:
1. Filename It must be of STRING type.
2. Filetype DAT is not used any longer, instead ASC is used.
3. Field Separator The default value SPACE is used, incase for a TAB separated file X can be used.
4. Error:
In case of CURRENCY/UNIT Addition Error; Use addition CURRENCY/UNIT when outputting.
Correction:
The CURRENCY addition specifies the currency-dependant decimal places for the output of the data objects of type i or p. To obtain the currency-key, the field CURRKEY of the table TCURX is used. The system determines the number of the decimal places from the field CURRDEC of the selected CURRKEY.
To correct this error follow the following method:
WRITE: /3 'TOTAL',' ', TOTAL.
WRITE: /3 TOTAL, , TOTAL CURRENCY 2. --- Where 2is the Currency Key for Getting 2 decimal places.
5. Error:
In case of TYPE X Error; Variable must be of C, N, D, T or STRING type.
Correction:
We need to change all the Type X (Hexadecimal) variables to Type C with their values unchanged.
So the method to be followed is:-
1. Load the definition of the class CL_ABAP_CONV_IN_CE or CL_ABAP_CHAR_UTILITIES.
2. Declare the variable as Type C, and use the method UCCP(XXXX) of the class CL_ABAP_CONV_IN_CE where XXXX represents the 8-bit Hexadecimal value and incase the variable holds a Hex value for a Horizontal Tab , then the Attribute HORIZONTAL_TAB of the class CL_ABAP_CHAR_UTILITIES can be used directly instead of using the method UCCP.
E.g.:
i) *DATA: TAB TYPE X VALUE 09, Tab character
CLASS: CL_ABAP_CHAR_UTILITIES DEFINITION LOAD.
DATA TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
ii) * DATA: CHAR TYPE X VALUE 160.
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA CHAR TYPE C.
CHAR = CL_ABAP_CONV_IN_CE=>UCCP(00AO).
(Here 00A0 is the Hexadecimal equivalent of the decimal 160).
3. Incase the TYPE X Variable has a length more than 1, then an internal table must be created for the variable.
E.g.:
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA : LF(2) TYPE X VALUE 'F5CD'.
DATA : BEGIN OF LF,
A1 TYPE C,
A2 TYPE C,
END OF LF.
LF-A1 = CL_ABAP_CONV_IN_CE=>UCCP('00F5').
LF-A2 = CL_ABAP_CONV_IN_CE=>UCCP('00CD').
6. Error:
In case of the Character -Error; The Character -cant appear in names in Unicode Programs.
Correction:
The Character -(Hyphen) appearing in Variable names is replaced by the character _ (Under Score) for Unicode/Upgrade Compliance.
E.g.:
*wk-belnr LIKE bkpf-belnr,
*wk-xblnr LIKE bkpf-xblnr,
*wk-date LIKE sy-datum,
*wk-wrbtr LIKE bseg-wrbtr,
*wk-name1 LIKE lfa1-name1,
*wk-voucher(8) TYPE c.
wk_belnr LIKE bkpf-belnr,
wk_xblnr LIKE bkpf-xblnr,
wk_date LIKE sy-datum,
wk_wrbtr LIKE bseg-wrbtr,
wk_name1 LIKE lfa1-name1,
wk_voucher(8) TYPE c.
7. Error:
In case of The SUBMIT-TO-SAP-SPOOL Error; you should not use the statement SUBMIT-TO-SAP-SPOOL without the WITHOUT SPOOL DYNPRO addition.
Correction:
1. Declare variables of type PRI_PARAMS, ARC_PARAMS, and a variable of TYPE C which would be used as a VALID FLAG.
2. Call the FM GET_PRINT_PARAMETERS:
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
3. Use the SUBMIT-TO-SAP-SPOOL statement.
E.g.:
submit zrppt500
using selection-set 'AUTO3'
with res_no eq lo_rsnum
with sreserv in preserv
to sap-spool destination p_dest
immediately 'X'. "print immediate
DATA: print_parameters type pri_params,
archive_parameters type arc_params,
valid_flag(1) type c.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
Submit zrppt500
Using selection-set 'AUTO3'
With res_no eq lo_rsnum
with sreserv in preserv
to sap-spool
SPOOL PARAMETERS PRINT_PARAMETERS
ARCHIVE PARAMETERS ARCHIVE_PARAMETERS
WITHOUT SPOOL DYNPRO.
8. Error:
In case of Message Error; Number of WITH fields and number of Place Holders are not same .
Correction:
Split the statement after WITH into the same number as the place holder for that Message ID.
E.g.:
1. * MESSAGE E045.
MESSAGE E045 WITH '' ''.
2. in program ZIPI0801
Start of change for ECC6
message e398(00) with 'Could not find access sequence'
'for condition type:'
p_ptype.
message e398(00) with 'Could not find '
'access sequence'
'for condition type:'
p_ptype.
End of change made for ECC6
9. Error:
In case of Move between 2 different Structures; The structures are not mutually convertible in a Unicode program.
Correction:
Make both the Data Types compatible and then assign the contents.
E.g.:
The statement move retainage_text to temp_text. Gives an error, where RETAINAGE_TEXT is an internal table and TEMP_TEXT is a string of length 200.
A Feasible solution for this is to specify from which position to which position of the string, the fields of RETAINAGE_TEXT should be assigned.
TEMP_TEXT+0(1) = RETAINAGE_TEXT-DQ1.
TEMP_TEXT+1(1) = RETAINAGE_TEXT-HEX.
TEMP_TEXT+2(20) = RETAINAGE_TEXT-FILLER1.
TEMP_TEXT+22(15) = RETAINAGE_TEXT-AMT_DUE.
TEMP_TEXT+37(8) = RETAINAGE_TEXT-TEXT.
TEMP_TEXT+45(10) = RETAINAGE_TEXT-DUE_DATE.
TEMP_TEXT+55(1) = RETAINAGE_TEXT-DQ2.
10. Error:
In case of no description found; add a GUI title.
Correction:
In this type of error gui title is generally missing so add a GUI title to the module pool.
11. Error:
In case of writing internal or transparent table
Correction:
Write individual fields.
E.g.:
WRITE: / EXT. --> EXT should be a character type field
WRITE: / EXT-ZZSTATE, EXT-LINE_NO, EXT-LINE_TXT, EXT-AMT, EXT-ZZSKUQTY.
12. Error:
In case of combination reference table/field S541-UMMENGE does not exist
Correction:
Was due to error in reference table S541. TABLE S541 has errors
1)Foreign key S541- ZZMARKET (ZZMARKET AND KATR2 point to different domains)
2)Foreign key S541-ZZACQUIGRP (ZZACQUIGRP AND KATR8 point to different domains)
Changed the domain of ZZMARKET (from ZMKCODE to ATTR2)
And that of ZMKCODE (from ZACCODE to ATTR8)
13. Error:
In case of KEY does not exist
Correction:
The reference table for field KBETR was KNOV earlier changed it to RV61A as KNOV was in turn referring to RV61A.
14. Error:
Incase of WRITE statement, Literals that take more than one line is not permitted in Unicode systems.
Correction: To correct this error, we need to align the spaces accordingly so that the statement doesnt go beyond the line.
15. Error:
Incase of Data statement, The data type ZWFHTML can be enhanced in any way. After a structure enhancement, this assignment or parameter might be syntactically incorrect ..
Correction: To correct this error, instead of like in the Data statement, use type.
16. Error:
Incase of DESCRIBE statement, DESCRIBE can be used only with IN BYTE... Or IN CHARACTER mode in Unicode systems.
Correction: To correct this error, use additional text, IN BYTE MODE / IN CHARACTER MODE along with this statement.
CHARACTER MODE is added when the data object is of flat/ character type.
BYTE MODE is added when the data object is a deep structure.
Syntax: DESCRIBE FIELD data_obj : LENGTH blen IN BYTE MODE,
LENGTH clen IN CHARACTER MODE.
Where blen and clen must be of type I.
17. Error:
Incase of DO-LOOP Error, In Do loop range addition needed
Correction:
An internal tables is declared and the two fields (VARYING field and NEXT field) were
Included inside the internal table
E.g.: In program SAPMZP02
DO 11 TIMES
VARYING STATION_STATE FROM STATION1 NEXT STATION2. ECC6
CASE SYST-INDEX.
WHEN 1
STATION_STATE = STATION1.
WHEN 2
STATION_STATE = STATION2.
WHEN 3
STATION_STATE = STATION3.
WHEN 4
STATION_STATE = STATION4.
WHEN 5
STATION_STATE = STATION5.
WHEN 6
STATION_STATE = STATION6.
WHEN 7
STATION_STATE = STATION7.
WHEN 8
STATION_STATE = STATION8.
WHEN 9
STATION_STATE = STATION9.
WHEN 10
STATION_STATE = STATION10.
WHEN 11
STATION_STATE = STATION11.
18. Error:
Incase of the parameter QUEUE-ID Error, QUEUE-ID is neither a parameter nor a select option in program rsbdcbtc.
Correction:
The parameter in program rsbdcbtc is QUEUE_ID and so is changed in this program
E.g.: In program Z_CARRIER_EDI_INTERFACE
submit rsbdcbtc with queue-id = apqi-qid and return. "ECC6
The parameter name changed by replacing '-' with '_' as in program rsbdcbtc "ECC6
Submit rsbdcbtc with queue_id = apqi-qid and return. "ECC6
19. Error:
Incase of EPC Error, Field symbol <TOT_FLD> is not assigned to a field .
Correction:
This error couldn't be rectified as the error occurs in a Standard SAP include- LSVIMF29.
The OS Note - 1036943 needs to be applied.
Error:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
Correct:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
Error:
Constants : c_tab type x value '09' .
Correct:
Constants : c_tab type abap_char1 value cl_abap_char_utilities=>horizontal_tab .
Error:
Data : begin of output_options occurs 0 . Include structure ssfcompop.
Data : end of output_options .
Correct:
Data : output_options type standard table of ssfcompop with header line .
Error:
PARAMETERS : NAST TYPE NAST .
Correct:
PARAMETERS : NAST TYPE NAST NO-DISPLAY .
Replace WS_DOWNLOAD and WS_UPLOAD by
GUI_UPLOAD and GUI_DOWNLOAD and check the import and export parameter types , do the changes accordingly. Because FILENAME paramater type is different because of this it will give dump.
For issue during Issue using SO_NEW_DOCUMENT_ATT_SEND_API1 Function module, the solution is After this FM we should put COMMIT WORK.
Issue:
Moving data from one structure to another structure if those two structures are not compatible
Solution:
we should use move-corresponding or field by filed we need to move it.
If database structures are different in 4.6c and ECC6.0,
Then we should go with append structure concept.
While testing the report if it gives dump at Select query level or any database or view level,then just goto that table or view and goto the data base utility(se14) adjust the database. But make sure that selected radio button in se14 transaction should be activate and adjust database
Also Check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm
Reward points if helpful.
Regards,
Ramya -
Unicode error while upgrading from 4.6 to ECC 6.0
Dear All,
I am getting unicode errror while upgrading from 4.6 to ECC 6.0, when iam trying to open downloaded file in excel.
In debugging, error occurs while executing statment "CALL METHOD OF obj_ex_sheet " in the code given below:
FORM open_downloaded_file_in_excel *
FORM open_downloaded_file_in_excel.
DATA:
lv_ole_books TYPE ole2_object,
lv_ole_sheets TYPE ole2_object,
lv_subrc LIKE sy-subrc,
lv_title(70) TYPE c,
lv_text1(70) TYPE c,
lv_text2(70) TYPE c.
start excel
CREATE OBJECT obj_ex_sheet 'EXCEL.SHEET'.
IF sy-subrc NE 0.
lv_subrc = sy-subrc.
FREE OBJECT obj_ex_sheet.
PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
CALL METHOD OF obj_ex_sheet 'Application' = obj_ex_app.
IF sy-subrc NE 0.
lv_subrc = sy-subrc.
FREE OBJECT obj_ex_app.
FREE OBJECT obj_ex_sheet.
PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
SET PROPERTY OF obj_ex_app 'Visible' = 1.
open data file: main file
CALL METHOD OF obj_ex_app 'Workbooks' = lv_ole_books.
CALL METHOD OF lv_ole_books 'Open' = obj_ex_wbook
EXPORTING #1 = gv_filename
#2 = 2
#3 = 0
#4 = 1
#5 = 0
#6 = 0
#7 = 1.
IF sy-subrc NE 0.
lv_subrc = sy-subrc.
FREE OBJECT obj_ex_wbook.
FREE OBJECT obj_ex_app.
FREE OBJECT obj_ex_sheet.
PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
FREE OBJECT lv_ole_books.
CALL METHOD OF obj_ex_wbook 'Worksheets' = lv_ole_sheets.
CALL METHOD OF lv_ole_sheets 'Item' = obj_ex_wsheet
EXPORTING #1 = 1.
FREE OBJECT lv_ole_sheets.
GET PROPERTY OF obj_ex_wsheet 'UsedRange' = obj_ex_usedrange.
CALL METHOD OF obj_ex_usedrange 'AutoFormat'
EXPORTING #1 = 18.
SET PROPERTY OF obj_ex_wsheet 'Name' = sy-tcode.
FREE OBJECT obj_ex_usedrange.
PERFORM free_ole_objects.
CALL FUNCTION 'FLUSH'
EXCEPTIONS
OTHERS = 0.
ENDFORM.
regards,
Divyahi,
In the OPEN DATASET STATEMENT ADD THE ENCODING ADDITION IN TEXT MODE.
Regards,
Balakumar.G
Reward Points if helpful. -
Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query
Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
FROM COSP CLIENT SPECIFIED
WHERE GJAHR IN SELR_GJAHR
AND KSTAR IN SELR_KSTAR
AND LEDNR EQ '00'
AND OBJNR IN SELR_OBJNR
AND PERBL IN SELR_PERBL
AND VERSN IN SELR_VERSN
AND WRTTP IN SELR_WRTTP
AND MANDT IN MANDTTAB
GROUP BY (GROUP_LIST).
LOOP AT I_COSP .
COSP = I_COSP .
PERFORM PCOSP USING I_COSP-_COUNTER.
CLEAR: $RWTAB, COSP .
CLEAR CCR1S .
ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
endselect.
SELECT
into table
for all entries in table
where.
use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
e.g in your case
sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya -
Change Log issues - Post Upgrade
Hi Experts,
We are in the process of Upgrading BW from 3.X to BI 7. As part of this we copied our existing Production system into the sand box and basis did the technical upgrade on the same (Sand Box). Later we ran some post upgrade Jobs as part of the SAP defined Upgrade Process.
1) But after the upgrade i can notice that most of the ODS objects, doesn't have 'Change Log' table in the 'Information (Log/Status)' screen.
2) Even when i try to view the change log content in Manage screen, it gives me a pop up to enter the change log table, instead of directly taking me to the selection screen.
3) When i try to activate a request, even that fails with an SQL error 'SAPSQL_EMPTY_TABNAME'.
Is there any process that has to be run to link the Older version change log tables to the corresponding ODSs after Upgrade?
Has anyone come accross similar issues? If yes, how was it solved? All suggestions are invited.
Thanks and Regards,
JayHI JayaPrasad,
Chek the note : 1059171 which is related to Change log,
I too faced this issue when upgraded to Bi7.0 on SP12, but as soon as SP13 is installed the issue is solved, so I suggest to go for SP 13 for upgrading to Bi7.0.
Regards,
Srinivas -
Unicode issue jdbc receiver adapter
Hi guys,
I'm facing an unicode issue while trying to put some data into a MS database.
The sender system is a SAP ERP 6.0 system.
When we are trying to transfer some text in polish or korean or something else, this textes are not transferred correctly.
I already checked the SAP Note 831162 FAQ: XI 3.0 / PI 7.0 / PI 7.1 JDBC Adapter
and used the url parameter sendStringParametersAsUnicode=true
Furthermore I changed my mapping to get the sql statements, so that I add the attribute hasQuot="no"
and a leading N in front of the data string as described in the Note and in some threads in SDN
Unicode problem in JDBC receiver adapter
JDBC adapter , problem in inserting Korean Charaters in MS SQL
but nothing solved my problem.
any ideas?
Do all the languages have to be installed on the XI system?
Kind regards
JochenHi Sarvesh,
thanks for helping.
Unfortunately I´m not sure what I should exactly do.
If I get you wright I have to test the mapping using the test functionality in message mapping (test tab).
I did this already
The result message looks like this
<?xml version="1.0" encoding="UTF-8"?>
<ns0:IDOC_CDB_IMPORT_insert xmlns:ns0="http://endress.com/xi/sbo/cdb">
<ns0:StatementName1>
<ns0:dbTableName action="insert">
<ns0:table>CFG.DBO.IDOC_CDB_IMPORT</ns0:table>
<ns0:access>
<ns0:IDOC>CHRMAS</ns0:IDOC>
<ns0:SEGMENT>E1CABTM</ns0:SEGMENT>
<ns0:ATNAM></ns0:ATNAM>
<ns0:SPRAS>PL</ns0:SPRAS>
<ns0:ATBEZ hasQuot="no">N'D?ugo?? ca?kowita Tl; L:'</ns0:ATBEZ>
</ns0:access>
</ns0:dbTableName>
</ns0:StatementName1>
</ns0:IDOC_CDB_IMPORT_insert>
How to proceed?
copy this message to notepad or ultra edit and then doing what?
please specify clearly.
this message will be send to the jbdc adapter and this will insert it to database.
<ns0:ATBEZ hasQuot="no">N'D?ugo?? ca?kowita Tl; L:'</ns0:ATBEZ>
will end up in a table entry like D?ugo?? ca?kowita Tl; L:
has anybody an idea how I will get the wright characters in database, when I test my UDF in eclipse, the variable during debugging has the correct text.
When output this variable via system.ou.print(text); the same issue occurs, the special characters are shown as ?.
I appreciate for your help, unfortunately my polish colleagues hustle a little bit.
kind regards
Jochen -
Input requested: Issues in upgrading search for public site to 2013
We have a fully branded 2010 public site that uses search. In our upgrade to 2013:
We'd would prefer not to perform the visual upgrade because we don't want to update our master pages and page layouts.
Search currently uses a 2010 search scope to limit results to the single site collection - there are other portals on the farm.
We can't use the new 2013 result sources that replace search scopes, so I'm looking for a good way to limit search results. I know I could create a separate search service app for the portal, but I'd prefer not to do that.
Does anyone see a way to do this without performing the 2013 visual upgrade OR using custom development OR creating a new search service application that serves just the 2013. I know I'm asking to have my cake and eat it, too, but I want to exhaust
all easy options before I try something more complex.
Thanks for your help.
NateHi Nate,
As I understand, you are concerning about custom branding and search scope issues when upgrading from SharePoint 2010 to 2013 version.
For custom branding, SharePoint 2013 introduces a new user interface that is lightweight, fast, and fluid. To get this new experience, you must upgrade to the new UI. If your site collection contains custom branding, we recommend that, before you upgrade,
you first create an evaluation site collection where you can test and re-create your custom branding in a SharePoint 2013 environment. For more information:
http://technet.microsoft.com/en-us/library/dn178510(v=office.15).aspx
http://en.share-gate.com/blog/migrating-sharepoint-site-customizations-to-sp2013
For search scope feature in SharePoint 2010 search, we have content source now. To limit search results, we could use Query Rules and Result Sources:
http://blogs.technet.com/b/mspfe/archive/2013/02/01/how-query-rules-and-result-sources-can-be-used-to-customize-search-results.aspx
http://blogs.technet.com/b/tothesharepoint/archive/2012/10/09/build-a-specialized-search-experience-in-minutes-with-sharepoint-2013.aspx
http://brainlitter.com/2013/03/22/sharepoint-2013-search-scopes-are-gone-but-dont-fret/
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Theme issues during upgrade - EP 6 to EP 7
Dear experts,
We recently did an upgrade from EP 6 to EP 7. We are using the EFP to host some websites. Now we have an issue that in one of the sites we have a TLN iview that do not take the theme. The theme looks fine in other couple of sites we have hosted similarly.
Can someone suggest what could I do to fix this?
I have tried reimporting the Iview from an old EP6 system. Also I tried recreating the iview. I have no clue as why we do not have theme in this particlular iview.
Hope somebody has a clue. Do we have any document about the known issues while upgrading from EP6 to EP7?
regards,
NoufalThe issue was with the masthead iview. Seems the masthead file was corrupted during transport.
Thanks,
Noufal -
Stability issues after upgrade from 5 to 6.1?
Dear all,
my client plans to upgrade from WLS 5 to 6.1 soon. The application is
an intranet portal with Epicentric and Vignette used as additional
products.
However, some voices say that 6.1 has stability issues. Well, these
statements are rumours and lack any proof or even anecdotal evidence I
have heard of, and therefore it is very difficult to respond
appropriately.
Having said this, my questions are:
- Did any of you have stability issues after upgrading from 5 to 6.1
on Solaris?
- If yes, what were they and how did you solve them (e.g. upgrade to
SP 5)?
- In 1-2 sentences, what is the context of the application?
My goal is to present a evidence that the romoured stability issues
don't exist or/and a list of meastures to avoid/solve them, if any.
Many thanks in advance
Andreas"Andreas Raab" <[email protected]> wrote in message news:[email protected]..
my client plans to upgrade from WLS 5 to 6.1 soon. The application is
an intranet portal with Epicentric and Vignette used as additional
products.
However, some voices say that 6.1 has stability issues. Well, these
statements are rumours and lack any proof or even anecdotal evidence I
have heard of, and therefore it is very difficult to respond
appropriately.
Having said this, my questions are:
- Did any of you have stability issues after upgrading from 5 to 6.1
on Solaris?
- If yes, what were they and how did you solve them (e.g. upgrade to
SP 5)?
- In 1-2 sentences, what is the context of the application?
My goal is to present a evidence that the romoured stability issues
don't exist or/and a list of meastures to avoid/solve them, if any.Hi Andreas,
Normally proving that rumors are true is a responcibility of
rumors suppliers. Reverse does sound to me like a joke.
Regards,
Slava Imeshev
P.S. Current weblogic 6.1 is a stable product. -
Performance issues since upgrade
I am on a late 2011 MacBook Pro and am having severs performance issues since upgrading to Mavericks. I fear my issues may be related to company installed anti-virus (which I cannot remove), but I was hoping someone could look over my EtreCheck for other potential solutions.
One really odd issue I am having, which I cannot seem to find good information for on Google, is at least 4-5 times a day my Mac just stops. No beach ball, no anything, for about 1-5 minutes. Then it's fine. Maybe just me grasping at straws, but it seems related to a when webpage loads a bunch of images? I always use Safari btw, but testing other browsers, like Chrome & Firefox, it happens as well.
I have also removed TotalFinder and have noticed no improvement and still have the above issue.
Thanks in advance!
Here is my EtreCheck:
Problem description:
slow performance on Mavericks
EtreCheck version: 2.0.11 (98)
Report generated November 11, 2014 at 8:51:26 AM EST
Hardware Information: ℹ️
MacBook Pro (17-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,3
1 2.5 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6770M - VRAM: 1024 MB
Color LCD 1920 x 1200
LED Cinema Display 1920 x 1200
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 0:46:22
Disk Information: ℹ️
APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 749.30 GB (256.69 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Fitbit Inc. Fitbit Base Station
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Tablet PTZ-630
Logitech Logitech USB Headset
Apple Inc. Display iSight
Apple Inc. Apple LED Cinema Display
Apple Inc. Display Audio
Apple Computer, Inc. IR Receiver
Firewire Information: ℹ️
Iomega HDD unknown_device 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
disk1s1 (disk1s1) <not mounted> : 32 KB
Iomega HDD (disk1s3) /Volumes/Iomega HDD : 500.04 GB (22.88 GB free)
Files (disk1s5) /Volumes/Files : 499.90 GB (416.87 GB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Library/Application Support/Symantec/Protector
[not loaded] com.symantec.kext.protector.panther (1.0f5) Support
[not loaded] com.symantec.kext.protector.tigerplus (1.0f5) Support
/Library/StartupItems/SymAutoProtect
[loaded] com.Symantec.kext.SAVAPComm (11.0.6) Support
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[loaded] com.InnovationTechnology.driver.ComputerAudio (1.01 - SDK 10.7) Support
[not loaded] com.cisco.nke.ipsec (2.0.1) Support
[not loaded] com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) Support
Startup Items: ℹ️
CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
NortonMissedTasks: Path: /Library/StartupItems/NortonMissedTasks
SMC: Path: /Library/StartupItems/SMC
SymAutoProtect: Path: /Library/StartupItems/SymAutoProtect
SymProtector: Path: /Library/StartupItems/SymProtector
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.jamfsoftware.jamf.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.symantec.quickmenu.application.plist Support
[running] com.wacom.wacomtablet.plist Support
[running] net.juniper.pulsetray.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.fitbit.fitbitd.plist Support
[running] com.fitbit.galileod.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.jamfsoftware.jamf.daemon.plist Support
[not loaded] com.jamfsoftware.startupItem.plist Support
[loaded] com.jamfsoftware.task.1.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.rogueamoeba.instanton-agent.plist Support
[running] net.juniper.AccessService.plist Support
[loaded] net.juniper.UninstallPulse.plist Support
User Launch Agents: ℹ️
[loaded] com.valvesoftware.steamclean.plist Support
[running] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
gfxCardStatus Application (/Users/[redacted]/Downloads/gfxCardStatus.app)
Dropbox Application (/Applications/Dropbox.app)
Microsoft Database Daemon Application (/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app)
cdn Volume (/Volumes/cdn)
TotalFinder Application (/Applications/TotalFinder.app)
SAVDiskMountNotify Application (/Library/Application Support/Symantec/AntiVirus/SAVDiskMountNotify.app)
ScanNotification Application (/Library/Application Support/Symantec/AntiVirus/ScanNotification.app)
SymSecondaryLaunch Application (/Library/Application Support/Norton Solutions Support/Scheduler/SymSecondaryLaunch.app)
Internet Plug-ins: ℹ️
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.223
AdobePDFViewer: Version: 10.0.2 Support
Unity Web Player: Version: UnityPlayer version 4.5.4f1 - SDK 10.6 Support
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
iPhotoPhotocast: Version: 7.0
DirectorShockwave: Version: 11.5.9r620 Support
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Silverlight: Version: 4.0.60310.0 Support
MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
net.juniper.DSSafariExtensions: Version: (null) Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.1.2 Support
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
User Internet Plug-ins: ℹ️
SOEWebInstaller: Version: 1.0 - SDK 10.5 Support
Aspera Web 3.1.2.72265: Version: (null) - SDK 10.6 Support
Safari Extensions: ℹ️
1Password
Adblock Plus
Reddit Enhancement Suite
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
MacFUSE Support
SymAutoProtect
Symantec\nQuickMenu Support
WacomTablet Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Destinations:
Iomega HDD [Local]
Total size: 500.04 GB
Total number of backups: 37
Oldest backup: 2014-10-14 14:11:11 +0000
Last backup: 2014-11-11 13:27:48 +0000
Size of backup disk: Excellent
Backup size 500.04 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
36% com.apple.WebKit.Plugin.64
34% SymAutoProtect
13% WindowServer
9% Unity
4% Activity Monitor
Top Processes by Memory: ℹ️
455 MB Safari
361 MB com.apple.WebKit.Plugin.64
292 MB Unity
77 MB com.apple.WebKit.Networking
77 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
2.08 GB Free RAM
2.39 GB Active RAM
1.34 GB Inactive RAM
1.40 GB Wired RAM
1.11 GB Page-ins
5.54 GB Page-outsActivity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy -
REgarding licensing issues involvng 'Computername' and the use of UpperCase4 vs Lowercase Letters
Does any one know if it would cause problems for the Office 365 software license to be displayed as licensed to an ALL CAPS name like 'MY-FAVORITE-PC' but the computer itself shows the computer name to be 'my-favorite-pc"?
If it does, which one should I change? A couple of people here have had this same problem (which usually occurs when they change to using a different PC for their account) I have to Deactivate their Old PC namer and then install the licnse to
their New OC using whatever name it has.
On more than one system, this has resulted in various odd "failure to contact Microsoft server" issues when activating. The problem continues for 7 days and then their copy of Office starts showing reed warning bards and eventually gets totally
unusable.
However, if I uninstall the office, deactivate the license, and reinstall it once again, it install just fine and acts ok but invariably at some point, the same thing occurs.
On one of them I noticed the difference in the case of the letters used in the computer name and the license name. On others I am wondering about various software add ins for Outlook or some other 3rd part application causing the problem. Whatever
it is, it gets extremely annoying. Officer 365 apparently must run an activation sequence almost constantly while Office 2010 (and I presume 2013) ran it once and were done with it.
Searching Google I have found too many possible reasons along with a lot of people who have had the same problems but no one seems to have the 100% solution. This has only started happening since we switched to Office 365 and only
seems to occur on systems that are changed out to different ones with the same User's 365 Account which is in good standing and has 5 available licenses of which only one is in use.
In the case of the caps vs lowercase I also wonder if changing the name to CAPS on their PC would create additional problems on its own?Hi Questorfla,
For the Office 365 software license issue, I recommend you can post in dedicated Office 365 Forum to get a better response:
http://community.office365.com/en-us/f/148.aspx
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang -
Issue installing/upgrading to ITunes 10.6.1.7
Im having an Issue installing/upgrading to iTunes 10.6.1.7 When upgrading it would not istall and tell me to go to Tools>Download manual. I also had an issue with my IPod touch not showing up in iTuens all of a sudden. So figuring the two problems were related I uninstalled iTunes (cleaned my itues folder in my C drive also) with hopes installing it fresh would work and now when I install 10.6.1.7 I get the following in a pop-up window "The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified. Please run the installer again, or click Finish to exit."
Anyone know what the issue is?Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Issue after upgrade the ASA5520 from 7.2.4 to 8.2.5,
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsidi am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid
Maybe you are looking for
-
Problem with flash element in Dreamweaver
Hi, I am a little new to dreamweaver and am starting up a new site with a flash element. I have started this out and it works great on my computer when i preview it, but the flash element isn't showing up when I publish it. When it loads in the brows
-
Dump while Executing DTP - PSA To ODS
While executing DTP, I am getting the following ABAP Dump: "MESSAGE_TYPE_X". "MESSAGE_TYPE_X" " " "SAPLRSSTATMAN" or "LRSSTATMA "RSSTATMAN_GET_PARTTAB_PSA" I was facing some selection issue in the Info Package (generic Data source), then I have delet
-
Oracle 9.0.1 installation on RH Linux 9 : Error in CreateOUIProcess : 13
Hi, I am trying to install Oracle 9.0.1 on Red Hat Linux 9 and in the process I am getting error. I have installed jdk 1.3.1_15. In spite of setting JAVA_HOME, JDK_HOME, JRE_HOME to appropriate oracle installer does not picks up jre properly and trie
-
Two albums with same name combined into one
I have two greatest hits albums by different artists. Both albums are called 'greatest hits'. In iTunes on my Mac they appear as two different albums. I've just synched my music from my Mac to my iPhone (iOS8 I think). The albums have been merged int
-
Background Job Monitoring not getting activated
Hi Gurus, I have been trying to use the batch job monitoring with ccms. I have a problem in activating the "Background Job Monitoring" in few systems. I followed the steps in SAP Note 553953 but no use. In RZ21 i am not able to see the Background Job