Regarding Vivado and xilinx ISE

Hello
I am working with VC707 board, so I want to know which is better either Xilinx SDK or Vivado SDK because i am getting .elf file error at the time of compilng my application.
Thanks and Regards
Antriksh

Hi,
With Vivado the implementation Algorithms are advanced and different than ISE.
The strategies available in Vivado invokes the algorithm at backend and try to give you better performance with respect to timing, placement and resource utilization.
Vivado has better capability of handling 7-series devices than ISE.
Thanks,
Yash Palorkar
P.S. ISE is good till 6-series devices :)
Thanks,
Yash

Similar Messages

Floating License for Vivado and ISE

Hi
I am currently working on generating the bit file for Spartan 6 XC6SLX150. It was mentioned that Evaluation version of Xilinx and Vivado does not support this particular part number. Therefore we happened to get a floating license for Vivado. It was mentioned that once the Vivado license is upgraded the Xilinx ISE would be updated and the part number will be available in Xilinx to generate the bit file. The software was set up in window 8. After the installation procedure was completed the license was not updated. Any insight on this
Regards
Sukaniyaa

Hello ,
Starting from Vivado 2014.2, new Edition purchases will receive two license entitlements, a certificate-based entitlement that may be used with ISE 14.7 or previous versions, and an activation entitlement for Vivado tools. Earlier to 2014.1, tool
subscribers used to receive a single certificate license that enabled both ISE and Vivado.
So if you have purchased new Vivado Design Suite (2014.2 or later), you will also get license for ISE which doesn't need to be updated since ISE 14.7 is the last version of ISE and no further versions will be released.

Labview fpga vs xilinx ise

hi all
i am new to fpga and my question is fairly simple one which one is better ?
labview fpga or the xilinx ise platform ?
or does it depend upon the application?
Regards
Solved!
Go to Solution.

It always depends on the application. Better in what way?
I like programming in LabVIEW, so I think LabVIEW FPGA is a much better choice. Learn just a little more than regular LabVIEW and you can program an FPGA! Unless you have experience using ise, I suspect LabVIEW would be the easier route.
If you are looking at price, maybe ise wins. It isn't cheap to get buy LabVIEW and the FPGA module (and probably RT module) so you have all the tools.
If the task is very complex, you might manage to make the program slightly more efficient using a lower level tool like ise. You might shave off a few nanoseconds of loop time. In 99.9% of the cases, this is unlikely. LabVIEW code does a pretty good job converting over to FPGA.
Bruce
Bruce Ammons
Ammons Engineering

Digital Electronics FPGA Board with Xilinx ISE

Hi,
I've a design in Xilinx ISE. I Synthesized and created the Bit map file.
How can I export this bitmap file to the NI Digital Electronics FPGA is board? I tried using Adept to program, but the tool didn't detect FPGA board.
Thanks in advance.

Hello,
The Adept Program is something that is made by Digilent. This application isn't meant for being used with non-digilent FPGAs such as the one on the NI Digital Electronics FPGA Board. The FPGA on this board is made by Xilinx so you have to use Xilinx tools in order to deply files to the FPGA (assuming you're not using LabVIEW FPGA). Specifically, you should use the Xilinx iMPACT Software, version 10.x or later, which is part of the ISE WebPACK kit. You can get this software from www.xilinx.com/ise.
If you still have questions about deploying your files to the FPGA, you can refer to the following resource.
Xilinx iMPACT Examples:
http://www.ni.com/white-paper/8671/en/
I hope this helps!
Regards,
Cameron T
Applications Engineer
National Instruments

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.)

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.) Do you know where I go to change the setting to allow me to "always allow" cookies?

Hi lisaarnett111,
If you are having issues turning on Always Allow for cookies in Safari on your iPad, you may want to check to make sure that you don't have Private Browsing enabled, as noted in the following article:
Turn Private Browsing on or off on your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

Question regarding selectOneMenu and PROCESS_VALIDATIONS(3) phase

Hi im a bit lost regarding selectOneMenu and how validation phase all works together.
The thing is that i have a simple selectOneMenu
<h:form id="SearchForm">
     <h:panelGrid columns="3" border="0">
          <h:outputLabel id="caseTypeText" value="#{msg.searchCaseCaseType}" for="caseType" />
          <h:selectOneMenu id="caseType" value="#{searchCaseBean.caseType}" style="width: 200px;" binding="#{searchCaseBean.caseTypeSelect}">
               <f:selectItem itemValue="" itemLabel="#{msg.CommonTextAll}" />
               <f:selectItems value="#{searchCaseBean.caseTypes}" />
          </h:selectOneMenu>
          <h:message for="caseType" styleClass="errorMessage" />
          <h:panelGroup />
          <h:panelGroup />
          <h:commandButton action="#{searchCaseBean.actionSearch}" value="#{msg.buttonSearch}" />
     </h:panelGrid>
</h:form>Now when i hit submit button i can see that the bean method searchCaseBean.caseTypes (used in the <f:selectItems> tag) is executed in the PROCESS_VALIDATIONS(3) phase. How come? I dont whant this method to be executed in phase 3, only in phase 6.
If i add the this in the method if (FacesContext.getCurrentInstance().getRenderResponse())
public List<SelectItem> getStepStatuses(){
     List<CaseStep> caseSteps = new ArrayList<CaseStep>();
     if (FacesContext.getCurrentInstance().getRenderResponse()) {
          caseSteps = getCaseService().getCaseStep(value);
     List<SelectItem> selectItems = new ArrayList<SelectItem>(caseSteps.size());
     for(int i=0; i < caseSteps.size(); i++){
          CaseStep step = caseSteps.get(i);
          String stepStatus = step.getStatus() + "_" + step.getSubStatus();
          selectItems.add(new SelectItem(stepStatus, step.getShortName()));
     return selectItems;
} Now i get a validation error (javax.faces.component.UISelectOne.INVALID) for the select field and only phase1, phase2, phase 3 and phase 6 is executed.
Im lost?

I see. Many thanxs BalusC. Im using your blog very often, and its very helpfull for me.
I changed now to use the constructor load method instead. But know im getting problem of calling my service layer (Spring service bean). Its seems they havent been init when jsf bean is calling its constructor.
Can i init the spring service bean from the faces-config file?
JSF Bean
    public SearchCaseBean() {
          super();
                //caseService need to be init
          if(getCaseService() == null){
               setCaseService((CaseService)getWebApplicationContextBean("caseService"));
          fillCaseTypeSelectItems();
          fillCaseStatusSelectItems();
.....faces-config
<managed-bean>
          <managed-bean-name>searchCaseBean</managed-bean-name>
          <managed-bean-class>portal.web.SearchCaseBean</managed-bean-class>
          <managed-bean-scope>request</managed-bean-scope>
          <managed-property>
               <property-name>caseService</property-name>
               <value>#{caseService}</value>
          </managed-property>
     </managed-bean>

Question regarding roaming and data usage

I am currently out of my main country of service, and as such I have a question regarding roaming and data usage.
I am told that the airplane mode is sufficient from keeping the phone off from roaming, but does this apply to any background data usage for applications and such?
If the phone is in airplane mode, are all use of the phone including wifi and application use through the wifi outside of all extra charges from roaming?

Ann154 wrote:
If you are getting charged to use the wifi, then it is possible. Otherwise no
Just to elaborate here, Ann154 is referring to access charges for wifi, which is nothing to do with Verizon, so if you are using it in a plane, hotel, an internet cafe etc that charges for Wifi rather than being free . Verizon does not charge you (or indeed know about!) wifi usage, or any other usage that is not on their cellular network (such as using a foreign SIM for example in global phones) So these charges, if any, will not show up on the verizon bill app. Having it in airplane mode prevents all cellular data traffic so you should be fine

Question regarding MM and FI integration

Hi Experts
I have a question regarding MM and FI integration
Is the transaction Key in OMJJ is same as OBYC transaction key?
If yes, then why canu2019t I see transaction Key BSX in Movement type 101?
Thanks

No, they are not the same. The movement type transaction (OMJJ) links the account key and account modifier to a specific movement types. Transaction code (OBYC) contains the account assignments for all material document postings, whether they are movement type dependent or not. Account key BSX is not movement type dependent. Instead, BSX is dependent on the valuation class of the material, so it won't show in OMJJ.
thanks,

**question regarding 3G and wif**.

I have a question regarding 3G and wifi. I have #G activated as well as wifi, when I go to retrieve mail for example I get a pop up asking me if I want to connect to a wifi network…should I have wifi and 3G activated at the same time, and why am I getting the pop up…
Thanks

You can have them on at the same time, but they will not be used at the same time for data. The order of preference for data is WiFi > 3G > EDGE > GPRS. You're getting the pop up, most likely, because you have Settings > Wi-Fi > Ask to Join Networks set to ON. You can set that to OFF, and the iPhone will still join known (i.e. previously used) WiFi networks automatically.

Question regarding Dashboard and column prompt

My question regarding Dashboard and column prompt:
1) Dashboard prompt usually work with only for columns which are in subject area. In my report I've created some of the columns which are based on other columns. Like I've daysNumber column that is based on two other columns, as it calculates the difference of two dates. When I create dashboard prompt I can't find this column there. I need to make a prompt on this column.
2)For one of the column I've only two values 1 and 0. When I create prompt for this column, is it possible that in drop down list It shows 'Yes' for 1 and 'No' for 0 and still filter the request??

Hi Toony,...
I think there was another way of doing this...
In the dashboard prompt go to Show option > select SQL Results from dropdown.
There you need to write your Logical SQL like...
SELECT CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END FROM SubjectAreaName
Here.. Periods.Year is the column which is already exists in repository's presentation layer..
and difference of date functionality is the code or formula of column which you want to show in drop-down...
Also write the CASE WHEN 1=0 THEN PERIODS.YEAR ELSE difference of date functionality END code in fx of that prompt.
I think it helps you in doing this..
Just check and inform me if it works...
Thanks & Regards
Kishore Guggilla
Edited by: Kishore Guggilla on Oct 31, 2008 9:35 AM

Few questions regarding Training and event management

Dear All,
Can you please help me with the following queries regarding Training and Event Management:
1. How to freeze a completed business event so that no changes to its record (like delete/update attendee details or event detail) is possible?
2. How to get feedback from attendee/faculty with a predefined format with rating (1-4 scale)
3. How to maintain department and category wise training man/hrs or training man/days?
Any help will be appreciated.
Regards,
Toa

Hi Toa,
1. Run report RHHISTO0 via SA38. Once the business event is flagged as "historical" no further changes can be done.
3. SM30 - T77S0 - Make the following swtiches active:
SEMIN AINST
SEMIN APART
Then when events are followed up, these training data is recorded to employee 2002 infotype. You can report on it via PT90 (for department-based selection use "Further selections")
Regards,
Dilek

I am having a dought regarding import and export.

I am having a dought regarding import and export.
I am having one table called login_table where 40k rows are present and in production server. Now i want to take a export dump of login_table and want to import it into a table called table_login which has zero rows but having same table structure and it is present in another database. Please reply soon.

Please reply soonWhy?
This is a forum of volunteers, so no one is under any obligation to you. Please stop to be demanding and consequently insulting.
Also what doubt do you have? It wouldn't work? This begs the question why you just didn't try? No one ever died from working.
Sybrand Bakker
Senior Oracle DBA

Web dynpro documents regarding dynpro and Portal

Hi,
I am new in web dynpro so i need some documents regarding dynpro and portal. So please provide it and if possible send it my personal mail [email protected]
I am also looking for some examples applications .If any budy have links of it provide it.
Regards,
gurprit

Hi Gurprit,
I have sent Complete Webdynpro Examples to your mail.
And also please check the following links for more clear understanding
Programming UI and Navigation
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9214b1e5-0601-0010-fdb0-ec32d43b06e0
Webdynpro for Java
http://help.sap.com/saphelp_nw2004s/helpdata/en/15/0d4f21c17c8044af4868130e9fea07/frameset.htm
Webdynpro Samples
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/web%20dynpro%20sample%20applications%20and%20tutorials.htm
Web Dynpro User Interface
https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/webcontent/uuid/ce44a14c-0a01-0010-af89-d7dbd944f176 [original link is broken]
PDf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/library/nw/netweaverdevelopersguide2004s/sap%20netweaver%20developer's%20Guide%202004s/UsingJava_00_PDFsList.ca
SAP Netweaver Application Server eLearning Catalog
https://www.sdn.sap.com/irj/sdn/elearn?rid=/webcontent/uuid/b1203f5e-0501-0010-bb88-915402c954f2 [original link is broken]
give rewards if useful.
regards
Anil

Need help Regarding Payroll and OM

Hi All,
Can any one of you provide me a configuration documents regarding Payroll and OM ..I need it very badly.Can any of you help me out in this.You can mail to my id
[email protected].
Thanks in advance,
Sandeep

hi friends
can u anybody have Payroll(PCR) DOC , please help me andn send to my mail ID. [email protected]
Thanks in advance
Regards,
Ramesh.n

Meraki MDM and Cisco ISE

Has anyone done an integration of Meraki Systems Manager enterprise MDM and Cisco ISE? there is absolutely no documentation on the subject except for the Meraki announcement that lists:
Cisco Identity Services Engine (ISE) integration – allows Systems Manager to directly communicate with ISE for device enrollment and posture assessment

Hidden in the Meraki blog is this configuration guide for Meraki SM and ISE.
https://www.dropbox.com/s/4pd2acrni9w9rjr/Meraki%20Wirelessv5.pdf
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

Regarding Vivado and xilinx ISE

Similar Messages

Maybe you are looking for