REGARDING WORKFLOW SETTINGS FOR ELM

HI FRIENDS,
I URGENTLY NEED TO KNOW WHAT ARE THE WORKFLOW SETTINGS REQUIRED TO MAKE ELM WORK. I HAVE DEFINED THE TASK WS14000029 AS 'GENERAL TASK' IN T-CODE 'OOCU' BUT NOW I AM GETTING DUMPS WHEN I TRY TO SAVE THE LIST . THE ERROR ANALYSIS IS GIVEN BELOW.
Error analysis
    Short text of error message:
    Unable to read RFC destination WORKFLOW_LOCAL_010
    Long text of error message:
    Technical information about the message:
    Message class....... "SWF_RUN"
    Number.............. 617
    Variable 1.......... "WORKFLOW_LOCAL_010"
    Variable 2.......... "RFC_READ_DESTINATION_TYPE"
    Variable 3.......... "DESTINATION_NOT_EXIST"
    Variable 4.......... " "
PLEASE HELP,
THANKS,
JAI

hi
you need not change the settings of the ELM workflow
you just need to activate it and plcae it as general
regarding you error
RFC destination WORKFLOW_LOCAL_010
just ask your basis guy to maintain this destination in SWU3
your dump will be resolved
see these are standard worflows ,you need not change the settings in normal circumstances
best regards
ashish

Similar Messages

Regarding workflow settings

hi all
i have a simple query that i have created a workflow in sandbox and since a workbench request is generated so workflow is reflecting in other client
please tell me if i have to show the same workflow in production client do i need to do all the changes in that client like maintainence of table entries which i have used in my rules and methods i have created for the workflow.
for activating the workflow and event linking etc. all these changes will be maintained in production client itself or there is some other way else.
regards
ashish

hi
you need not change the settings of the ELM workflow
you just need to activate it and plcae it as general
regarding you error
RFC destination WORKFLOW_LOCAL_010
just ask your basis guy to maintain this destination in SWU3
your dump will be resolved
see these are standard worflows ,you need not change the settings in normal circumstances
best regards
ashish

Regarding Configuration Settings for invoice tranfering

Hi,
I am new to MM.I want to be transfer Invoices from MM to SRM.Apart from this where i need to configuration settings has to be done(for different vendors).
Can any one give me the solution for this?
Thanks in Advance,
regards,
kishore.
Edited by: kishore kumar on Sep 22, 2008 6:34 AM
Edited by: kishore kumar on Sep 22, 2008 6:37 AM

TCODE:mrm2 need to set config settings

Need printer workflow settings for PS CS5 and HP Photosmart 8750

Friends:
This question must get asked periodically, but I couldnt find an answer:
I have Photoshop CS5 and an HP Photosmart 8750 Printer with these inkjet cartridges (original HP) availiable: (97 Tricolor, 101 Blue Photo, 102 Gray Photo) I also have HP glossy phot paper. Using a Mac Pro with OS 10.6.5 (Snow Leopard)
What do I set my PS5, My Print dialog and my Print Setting to get a decent color photo? I get muddy photos now and am wating lots of fine glossy photo paper. To get an aproximate photo I have to boost brightness by 60% on my photo. Still the printed photo doenst look like the screen.
Thanks for your help, printer profiles and suggestions!!
Migs

At the company I work for we hardly print from Photoshop as we have a pdf-workflow, but I think you might make it easier for others to help you if you provide screenshots (posted with the camera icon) of your print dialog windows, especially those regarding Color Management.

Regarding the settings for Acknowledgements ?

In the Application ACKs where and how we done the settings in XI server and ABAP side.
I followed the below link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe

Hi,
Application acknowledgments used to confirm that the asynchronous message has been successfully processed at the receiver. Acknowledgments can be used only together with async messages.
So the configuration of ALE AUDIT is the acknowledgment for IDOC communication.
ALEAUDIT is pretended to be used for Application Acknowledgements, in the case of Idoc to File, you can only send back a Transport Acknowledgement.
The AleAduit sent in the case of Idoc to File if the file is posted successfuly is not actually a App Ack, and that is why we get the info Ack not possible.
But, as the R3 might expect this Idoc, XI still sends it back to the Source R3 system.
I guess this is the only logical conclusion.
Refer below setp by step guides.
This is good gudie
How to Handle Acknowledgments for IDoc (NW7.0) --
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
This Feature is Available under SP 18 and we are on SP16
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
Thanks
Swarup

Doubt regarding ALE SETTINGS in IDOC scenario.

Hi Friends,
        I have some doubts regarding ALE settings for IDOC scenarios, can anyone please clarify my doubts.
For exmaple take IDOC to FILE scenario
The knowledge i got from SDN is --
One need to do at the R3 side is --- RFC DESTINATION (SM59) for the XI system.
                                                   --- TRFC PORT for sending IDOC to the XI system
                                                   --- CREATING LOGICAL SYSTEM
                                                   --- CREATING PARTNER PROFILE
               at the XI side is --- RFC Destination ( For SAP sender system)
                                       --- CREATING PORT for receiving IDOC from the SAP sending system(IDX1).
1. Do we create two logical systems for both Sender ( R3 system ) and Receiver( XI system ) in R3 system itself or in XI system or in both systems we create these logical systems? Is this a mandatory step in doing ALE configurations?
In IDOC to IDOC scenario-------
2. Do we craete two RFC destinations in XI system? One RFC DESTINATION for the Sender R3 system and another RFC DESTINATION for the Receiver R3 System? and do we create RFC DESTINATION for the XI system in receiver R3 system? If not.....y we don't create like this........Please give me some clarity on this.............
3. If we use IDOC adapter ,since IDOC adapter resides on the ABAP STACK ,we don't need sender communication channel ,for the similar reason----
y we r creating receiver communication channel in the case of FILE to IDOC scenario?
4. Can any one please provide me the ALE settings for IDOC to FILE scenario,
                                                                                FILE to IDOC scenario,
IDOC to IDOC scenario individually.
Thanks in advance.
Regards,
Ramana.

hi,
1. Yes, we create two logical systems for both Sender ( R3 system ) and Receiver( XI system ) in R3 system itself and
it is a mandatory step in doing ALE configurations
2. We create 1 RFC destination each in R3 and XI.
    R3 RFC destination points to Xi and
    XI RFC destination points to R3
3 We need to create Communication Channel for Idoc receiver as the receiver channel is always required but sender may not be necessary
4. ALE settings for all IDOC scenarios are same as follows....
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 6)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
Step 7)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.
SAP r3
sm59(status check)(no message)
WE02(status check)
WE05(status check)
BD87(status check)
Xi
IDx5(Idoc check)
SU53(authorization check)
Reward points if helpful
Prashant

Render settings for Blu-Ray in the UK

Hi all,
Bit of a newbie question regarding render settings for Blu-Ray. If I understand correctly, the uk frame rate is 25fps???? And we generally have 1080p TV's etc??? The Blu-ray presets in Media encoder don't offer this and the fact they don't makes me question if I'm not understanding the required settings correctly. ME does offer a 25fps preset but only in 1080i. So, my question is, what should I be rendering to, to then take the rendered file and author it to play on UK blu-ray players. Incidentaly, does anyone have any recommendations on authoring software. I just need to break it down into several seperate categories as well as being able to play the entire movie so the budget is minimal.
Many thanks for your help.
SJ

Hi, I'm using Mac Blu-rayRipper Pro and iMedia converter as well as Handbrake to get the highest quality transfer from my Blu-ray disks to iTunes and AppleTV. Each disk is a bit of a project as no two are the same in terms of the best method of conversion.
I've put a few details in my blog post on getting Blu-ray to work on my Mac Pro in the UK. Was a bit of an epic journey in the UK as we don't have all the options available in the USA:
http://www.theapplechap.com/TheAppleChap/Blog/Entries/2010/6/20Getting_the_most_out_of_Blu-ray_on_aMac.html
I also posted a short series of articles about getting the best possible movie conversion in iTunes covering subtitles, metadata and SD-HD tagging. May help so here's the link (to the first one, there are 3 in my blog):
http://www.theapplechap.com/TheAppleChap/Blog/Entries/2010/4/23Perfect_video_in_iTunes_-_Part_1Getting_great_rippedcontent.html
Best of luck
Alan

Change settings for workflow operation

Hi,
I am trying to change the settings and choose a custom workflow for the workflow operation 'Upload Document' in a folder in content services. However i cannot change the settings as the 'Workspaces' container has 'Do not allow subfolders to modify this operations workflow settings' checked, and i cannot edit this as it is all greyed out (even though i have admin rights?). Could anyone tell me how I can change the containers workflow settings?
Many Thanks
Dave

If you upgrade to Workspaces 10.1.2.2 you can relax this restriction. As a user with administration privs on the workspaces container (likely the orcladmin by default), switch into administration mode (with link in the top right hand corner of the UI) and edit the properties of the workspaces container to allow subfolders to override the workflow settings.
regards,
-sancho

Workflow fails when page is created through the CreatePublishingPageDialog.aspx. The settings for this list have been recently changed.

Hi,
I've created a content type and attached a workflow to it so when I create a publishing page the workflow should run.
My Page creation is based on the "_layouts/15/CreatePublishingPageDialog.aspx" page in order to be allowed to fill in the required fields on item creation (so I don't have to go to the page afterwards and choose "edit properties").
On my page library I have "Require content approval for submitted items" and "Require documents to be checked out before they can be edited?" set to YES.
This design has worked fine before I added my workflow. However now when I click save or check in/publish I get the below error. My guess is that the workflow starts (and blocks) right after I fill in the filename and click next in the "CreatePublishingPageDialog.aspx"
step to go to the required fields.
If I go back to my page after I receive the error below I can edit the required properties again and then publish the page correctly.
How do I avoid this? thank you
My pages are created through
Checking the ULS log I get this error:
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.SPException: The settings for this list have been recently changed. Refresh
your browser before editing this list.
at Microsoft.SharePoint.WebControls.BaseFieldControl.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

Hi Jan,
Thanks for posting this issue, Kindly try out with the hot fixes provided in the below mentioned URLS
https://support.microsoft.com/kb/2536591?wa=wsignin1.0
http://elblanco.codeplex.com/releases/view/6856
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Regarding workflow for OM infotype 1000,1001

Hi all,
i am having one scenerio.
i have to trigger a mail when there in any create,delete,change in infotype 1000,1001.
it should trigger a mail to the personal admin which is stored in 0001 infotype of that employee.
how this can be achived?
is there any workflow exists for this one or thrgh dynmaic action.
Please suggest any solution for this one....
Regards,
Manjunath

Hi Manjunath,
I think there is a standard workflow for that, otherwise you could create one. I think you will need to make sure for which changes exactly you need to trigger this workflow.
You need an event raised when a change is done, and then the workflow will start and you can send the e-mail. You probably need to create a new rule to determine the personal admin from infotype 0001.
Regards,
Martin

MSMP Workflow - Add new settings for Maintain Stages

Hello all,
I have a question: It is possible to add a new folder under "maintain stages"( "Eg. Settings for OVM Approval). See attached.
If yes, how?
Thank you,
Ovidiu

Hi Vimal,
here it is : http://help.sap.com/saphelp_45b/helpdata/en/2a/f9f542493111d182b70000e829fbfe/frameset.htm
For approvers & level determination, we can define it at spro.
SPRO- investment management(IM) - appropriation requests(AR) - control data - define partner determination & functions.
SPRO- IM - AR - approval - define approval levels for AR
Regards,

Workflow and settings for best quality .png export

I need to export a vector image to a .png for use on Retina display devices. What is the workflow and settings for exporting that results in the best possible quality .png image?

The workflow I used to produce the previously posted image on a WIndows 7 PC:
File>Export>Set "Save As" type to PNG
Upon pressing the "Save" button a PNG Options window will appear.
Resolution: Screen (72 ppi)
Anti-Aliasing: Type Optimized (Hinting)
I contacted Adobe support and they told me that the only way to export .png is via "Export" or "Save For Web".
"Save For Web" is designed to compress and I wanted to avoid that to ensure retina display quality.
I chose 72 ppi instead of a higher setting (support suggested I use 300 ppi) because Apple retina displays do not recognize ppi above 72.
The Anti-Aliasing setting was my default and I read somewhere that this was the best for getting crisp edges on retina displays (Sorry, I cant recall the source)
My concerns are that the export and anti-aliasing make larger files and I'm not convinced they are noticably better quality than "Save For Web".
Also, it's worth noting that the support was clearly reading from a reference guide. It was not a "real" expert that could explain the best workflow.

Regarding changing the application settings for Financial management (BPM)

Hi,
I have built the sample Comma application in HFM 9.3.1 using the BPM functionality from workspace as outlined in the documentation. The consolidation rules are set to "N" for this application when I open the XML using the window client. Can anyone tell me how I can change this to "Y" through workspace and load the application again. Since its a BPM application it does not allow me to load from window client. How to modify the application properties of a Financial manegement application through workspace (BPM). Any help will be appreciated.
Thanks in Advance......

If you extract your application from the web using the extract tasks, check on the Financial Management Application format, this should provide you with a file with an app extension something like this:
hfmmetada.app
When you hit extract and then click on 1 Click here to download, then save, on the save as file type button, make sure is .app; then open your app file with a text editor, change the application settings for ConsolidationRules=N to Y.

The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

I have a 2 server SharePoint farm.
All outgoing emails were working fine.
I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Even if I setup Alert on some list, it doesn't send email.
I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
What could be the cause of this and how to fix it?
EDIT
I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

Settings for Purchase Order output using services for MM-SUS scenario?

Dear Gurus,
I am configuring the service procurement classic and plan driven procurement for MM-SUS
environment. We are on SAP SRM 7.01/ECC 6 EHP5.
I need to maintain the below settings for PO output:
1. RUN transaction SWETYPV
2. IN the object types field, enter CL_SE_PUR_WF_OUT.
3. In the event field, enter CREATED.
4. In the receiver type field, enter WS53800008.
5. In the receiver function module field, enter SWW_WI_CREATE_VIA_EVENT_IBF.
6. Select the 'Linkage Activated' checkbox.
7. Save your entries.
Similarly, one more entry for the event CHANGED.
However, the system is not allowing me to save the settings.
If I choose BOR Object Type 'CL_SE_PUR_WF_OUT', it gives an error message 'Object type CL_SE_PUR_WF_OUT is not defined'.
If I choose object category 'Business class for object type CL_SE_PUR_WF_OUT, it gives an error message 'Class CL_SE_PUR_WF_OUT is not a business class.'
There are similar entries in the table SWETYPV for object type CL_SE_PUR_PO_WF_OUT' with object category CL.If we copy the entries and tries to replace the
object type 'CL_SE_PUR_PO_WF_OUT' with CL_SE_PUR_WF_OUT and save it, it gives an error message 'CL is not used for workflow event'.
Could you please help me on how to configure the settings for PO output from ECC system using services?
Any input is highly appreciated.
Thanks and regards,
Ranjan

Hi Ranjan,
Please add the value 'CL' in the table SWF_CATIDS
Then it will work.
With Regards,
Malay

REGARDING WORKFLOW SETTINGS FOR ELM

Similar Messages

Maybe you are looking for