Regd..Document Type field..

Hi All,
Can u plz explain the significanse of the field Document Type found on the details screen of billing docs (VOFA).
Can u PLZ explain when and with what value should we fill theis field.
I have gone thru the sap help but couldnot make out much.
Points Assured.
Best Regards,
Subbz..

hi
the document type is related to Accounting document which you assign the accounting document type to billing document,
there are different accounting documents for different billing documents, for example RV is used for posting of invoices and like wise there are different documents are used
your role in assigning in the billing documents is nothing
the accounting documents are assigned at account key level which is done by FI consultant
you need not worry about this field
regards
srini

Similar Messages

Order type field for PO/Document type field for PR

Hi Everybody
a) In Purchase Order creation screen (ME21)-for order type field -NB(standard order) is coming as default-How to make it blank(since we are using plantwise PO NOs)
b)In purchase requisition screation screen(ME51)also Document type-NB(standard order) is coming as default-How to make it blank(since we are using plantwise Purchase requisitions)
Thanks in advance
Joseph David

Simple,In order of ME21/ME51,Press F4,Select Required order/requistion type,Add it to Favourite list
or else
Create a transaction variant for ME21 & ME51 using t.code SDH0.
Transaction Variant - A Step by Step Guide for Creation,Check below link,
http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation
Edited by: Jeyakanthan A on Apr 2, 2010 5:42 PM

Sales document type - field indicator

Hi,
In transaction VOV8 for sales document type, there is a field 'Indicator'.
What is the function of this field? There is no help associated for this field.
Thanks

As F1 help indicates this field is only for display in TVAK table.
So, it means if you are selecting this indicator, a program associated with this indicator would be running.
This indicator is used in certain order types only
for example
Order type RA - Repair order is assigned indicator F (you can also look for other order types and indicators assigned to them).
If you create a order with sales document type RA, you would notice certain changes when compared to regular sales order type OR.
The most prominent is button Repairs.
There may be others but you could check for them.
You can play around and assign indicator F to order type OR.
You would see that OR screen now resembles the screen order type RA. It has Repairs button associated with it.
In short, if you assign indicator to sales order type, it runs a program associated with it. The SAP program is SAPL080O.

Standard credit memo g2 has document type field as blank?

Hi All,
When we create a credit memo with billing type G2 and release the billing document to Accounting.
how does system understand which accounting document type needs to be created.
Credit memo G2.
Genral control data.
Document type [ ] is Blank.
Regards,
RKMACC

Thanks all of you.
What is the relevance of refrence number and allocation number in copy control.
VTFL/VTFA.
i think this also plays an important role in copying the document number from invoice to accounting.
So my question is in order to have accounting document number same as billing document number.
What are the controls?
Regards,
Rajneesh

PO from PR only for a particular document type

Dear Gurus
I want purchase orders should be raised with reference to purchase requisitions only. System should allow to make purchase orders with reference to purchase requisitions only for a particular document type only.
I have configured in OMET and assigend this in SU3, now the system is not allowing to create PO for all document types, but I want to restrict this for a particular document type only
Is there any configu change required?
Regards
Muthukumar

Hi
You can make it in MM - purchasing -> purchase orders -> define document types -> check the document type -> click on link purchase requisitions.
And in define screen layout at document level - make PR mandatory for your purchase order document type (field reference).
Thanks
Edited by: Praveen Raghavendra on Jan 12, 2009 2:07 PM

Document type for Subsequent Credit/Debit for idoc invoic01/02

Hi SAP Gurus,
We are implemeting an interface to post incoming invoice with idoc Invoic01 idoc type.
We could able to post debit invoice and credit memo using document type in idoc (BSART) as "INVO" and "CRME".
But we would also like to post Subsequent Credit/Debit memos also with this idoc type but not sure what should be used in document type field ( BSART) in idoc.
If any one has come across this scenario please suggest whether is it possible to use Invoic01 idoc type to post Subsequent Credit/Debit notes if yes what is the document types used? also I see in OBCE transaction we can only mention Invoice document type for debit and credit invoices only. How to handle this incase of subsequent Credit/Debit invoices.
Thanks.

Hello Rish,
Please, be aware that if you look at the document at MIR4/MIRO etc, they will apear as a INVOICE/CREDIT MEMO (in the "Drop down" box, in the top of transaction)even if they are sub. credit/deb, but that is the standard system behavior ! In order to check if it is a Subcequent debit/credit, you can check directly into rbkp table or even better, just check in the PO history! it will be in a separate category !
Give it a check if this is not the case!
Regards!

PO document type not transferring to Customs management

Hi,
We have configured PO document type in GTS for Import and it got transfer to Complaince not to customs. I have created CULOIM document type and item category on customs. when i checked on this table /SAPSLL/V_TLEYVS i couldn't find CULOIM document type.. When i try to create a new one it say CULOIM document type already exist...
I do not know why it is saying like that even document type not there in that table and where would i find that.
One more question:
When we assign document type to logical system on Customs we can see GTS document type field... when you press F4 you can see CD Cat - A... Can you tell me what is that and where do you define and assign to custom document type.
regards
rc gopi

You can maintain the table by going into the SPRO and defining the doc tyoe you looking for , Onc eyou maintain there it reflects in in this table as it Configuration table.
If you want to delete , add any entry directly in table then u can do that by getting in debug mode.
Select a entry in table
Double click on it
Do /h to switch on the debugging
Press Enter
You will See different Case for "Code"
Type the filed name Code in in "field Name"
it will display the value 'SHOW' you can change this value as desire like to Delete 'DELE' , to insert new value 'AVNO' and then click on change pencil.
and press F8.
Now you come to the screen where u can do the changes and save it.
Custom Doc Category is taken automatically by SAP as for Export and Import doc type in customs it is always A.
If you cDefine Document Types for Advance Docs for Customs Declaration it is C.
Each category has got it one chateristics , so if we defining correct documnet type we need not to worry for category as it will by default come as set in SAP.
Kind Regards,
Sameer

Enter Document Type during GL Account Clear at F-03

Hi All,
Because I would like to use a special document type when I perform this particular transaction. Thus would like tto change the "Document Type" set as default by the system at this T-Code F-03.
I would appreciate if someone can enlighten me where can I configure for the Document Type" Field to be displayed during Account Clear: F-03.
Many Thanks!

Hi People,
Thanks for your responses!
I have tried to go to OBU1. Strangely, I couldn't find the default document type for T-Code: F-03.
Thus I couldn't change the default document type.
Please advise. Thanks!

How to add a default user group for multiple document type's?

Hi,
I am trying to add same default user group for different document types when MA is created. Is there any way to setup using a single "Document Security Template"? Or I need to create different templates for different document types?
Please confirm.
Thanks,
Saloni

Hi Saloni,
Based on what your specific requirement, it might be easier to do it with scripting.
If you are doing it using Document Security Templates, you would have to create a Document Security Template for each of the 6 MA types and assign the default group. Create another one and leave the Document Type field blank, so it will apply to the other 4 MA types that don't have a default group.
Regards,
Vikram

Default Exchange rate type at document type level for parallel currencies

Hi,
I have a scenario wherein 2 parallel currencies have been maintained (Grp & index based) against a Co Code and have maintained a default exchange type (Z2) in the Document type settings (OBA7).
But when I want to post a foreign currency document, system picks Z2 rates for Co Code currency conversion and not for Grp & index based. In fact it picks M rate for these addtional currencies.
I know that for parallel currencies, the system will always use the exchange rate type defined in transaction OB22 ( "M" rate) which is at Co Code level but I want default exchange rate type Z2 to be picked at Document Type level for all the parallel currencies.
Please suggest how to archive this.
Thanks,
Sam

Dear Sam,
The exchange rate type defined in the FI document type (-> field
exchange rate type in transaction OBA7) is only used for the currency
translation from transaction/document currency into first local
currency, not for the currency translation into second local (group)
currency or for the currency translation into third local currency.
The exchange rate types for the currency translation into second
local (group) currency and third local currency are defined in
transaction OB22.
Unfortunately there is no option to change the exchange rate of 2nd or
3rd local currency in our posting transactions. The design doesn't
regard that requirement. But you have the chance to adjust the parallel
currencies in OB22 or to change the amounts manually.
I hope this helps.
Mauri

CHANGE DOCUMENT TYPE IN SERVICE PO

Hi,
Do you know if is possible (and how) to change Document Type in PO by ME22N transaction in SERVICE purchase order in which you have created at least one services line item.
I'm not able to do it because Document type field is grey. If i shall delete all services line items that filed will became white, and so changable.
Can you help me?
Thanks.

Hi,
But isn't that what I said in the first place?
the question asked if you could change the document type on a service PO and I said that it couldn't be done?
I even apologised because I thought that I was wrong when you said that it was possible, but even in 4.6 onwards you cannot change the docuemnt type when it contains service item category lines?
Steve B

FB70-Document type display settings globally

Hi,
I want to know whether it is possible to change the document type field settings in 'FB70-Customer Post Customer Invoice' entry screen globally eventhough each user can make the setting using Editing Options, but my client wants it to be done globally.
Thanks
Suresh

There are actually 2 ways to do it. The first is a cross client changes using OBU1. The second is more relevant which is SPRO> Fin Acct> Gen Ledger Acct > GL Acct Posting > GL Acct Posting -Enjoy > Define Doc Type for Enjoy Trx of which you specify by companies, Acct Type and Tcode with the default Doc type.

Document Type in S_ALR_87012293

Hello Experts,
the report S_ALR_87012293 does not have document type field in the run time results screen. The document Type field is on the selection screen only. With out technical changes of the report, is it possible to add the doc type field in the run time screen? The chagne layout does not have this field. Thanks for you time.
Thanks in Advance.

Hi Venkat,
It is very difficult to add fields in the list, but it's technically possible. You have 2 options:
1. Write your own program
2. You can work the other way around. For example: in the selection parameter screen, there is document type input. You can execute the program based on document type.
Regards,
Suwandi

Making condition type mandatory for a particular po document type

I have 2 po document type namely local po and international po. i want a particular condition type ZLCS to be picked automatically as soon as the user picks the po document type.

Hi,
   You may check the condition technique through a new condition table with PO document type. You may proceed as below:
   You may append the standard MM condition structure to include the PO document type field (in structure KOMPAZ), with the help of abapers . Add the field to condition catalogue in the path: OLME - Conditions - Define Price Determination Process - Extend Field Catalog for Condition Tables.
    Now, you can create condition table with document type field in M/03. Maintain the condition table in the access sequence in M/07. Assign the access sequence to condition type in M/06. Include the condition type in pricing procedure. Maintain condition record for the condition type with required document type in MEK1.
    Check the procedure and revert back in case of any doubts.
Regards,
AKPT

WN and RN document type?

Dear Gurus,
In which case, Wn and RN document type will trigger while doing GR and IR.
Like, for good issue, WA document type, gor GR, WE..
Pls help..

Hi,
In T.Code OMBA - you can give WE or WN as per your requirement for the particular T.code.
WN is used if the PO contains cash discount, this amount will get deducted and posted at GR.
Regarding RN - Net posting at time of IR - You can use either RE or RN as per your requirement in the MIRO (Details tab - Document type field)
RE is used when there is cash discount and you want this cash discount amt to be credited to your stock account during IR.
<<text removed>>
Rajess Kumar.R
Edited by: Matt on May 1, 2009 6:37 PM

Regd..Document Type field..

Similar Messages

Maybe you are looking for