Regd SD integration with FI during PGI..

Hi,
I was going thru Some Questions in SD.Could u PLZ clarify which is the correct answer.
Q) When a goods issue is posted from the SD side then How does it integrates with FI ??
(1) Intergrate direct to FI
(2) Intergrate via MM to FI through table 30 of MM
I(3) ntergrate via PP to FI through table 30 of PP
(4) Integrate direct to FI through revenue account determination in SD
(5) Intergrate direct to FI through table 30 in SD
Which table r they referring to Table 30??
Cheerzz..
Subbzz..

Dear Subba Rao
1.System is built like that it goes to transaction code: OMWN here it is Movement Type and Transaction key.
2. Again Go to the Transaction code OBYC and it select the transaction key , against this transaction key movement type get selected from the previous configuration remeber the step 1, then through the valuation class the right G/L account is selected.
I hope you you have found what you are looking for.
Regards
Sanjay sahani

Similar Messages

Not able to start presentation services during EBS integration with OBI

Hi All,
I ran through an issue while trying to integrate OBIEE 11.1.1.5 with EBS R12. I followed the steps mentioned in the below link
http://docs.oracle.com/cd/E14571_01/bi.1111/e16364/ebs_actions.htm
I restarted all the services but i was routed to OBIEE login screen through EBS. Later on i made some changes in connection pool of the repository and started the services but now presentation services are not coming up. i tried restarting all the services from EM and opmnctl but to no avail. i went through sawlog5 and console~coreapplication_obips1~1.log file but not able to find any specific error. Below is the error description from both the files
sawlog5.log : [2012-06-29T07:24:45.000+02:00] [OBIPS] [ERROR:16] [] [saw.dms.conext.unwrap] [ecid: 000001U8AG25Ahd5pf_AiY01402c000001,0:29] [tid: 4884] Failed to restore ctx from reference[[
File:executioncontext.cpp
Line:286
Location:
saw.dms.conext.unwrap
saw.threadpool
saw.threads
ecid: 000001U8AG25Ahd5pf_AiY01402c000001,0:29
ThreadID: 4884
console~coreapplication_obips1~1.log : 12/06/29 08:08:29 Start process
12/06/29 08:08:51 Start process
12/06/29 08:19:41 Start process
12/06/29 08:20:00 Start process
12/06/29 09:09:53 Start process
12/06/29 09:10:15 Start process
i am relatively new to OBIEE 11g platform. Please let me know if i need to look in some other log files.
Regards,
Sandeep

Hi,
i did make changes to connection pool but those changes are inevitable. I pointed those connection pools to the new EBS database.
@DPKA : i did make changes to instanceconfig. As a part of OBIEE integration with EBS, i changed instanceconfig.xml and started the services. I didn't bring down the services while making the changes. Did that have any impact on services.
Regards,
Sandeep

SCCM 2012 integration with SCOM 2012 - Disable Alerts during patching

Have SCCM 2012 R2 and SCOM 2012 R2 and use the Software Update Patching process for servers. When using the checkbox to "Disable Operations Manager Alerts when this program runs" option have noticed on completion of the job and the target
server is rebooted, a scheduled task appears for a short time titled "SCOM 2007 Agent Resume Task". The task disappears and there is no history to view.
Is this a legacy naming convention from 2007 world when the maintenance mode is turned off from the SCCM patching process?
How do I see the actual code behind the SCCM and SCOM integration with Maintenance mode to validate it.

SCCM should use the following SCOM SDK to do that.
http://msdn.microsoft.com/en-us/library/bb437532.aspx
That's incorrect. There is no API or method to put an OpsMgr agent into maintenance mode on the client itself -- maintenance mode is a centrally controlled feature of OpsMgr. The API/code sample you linked is performing that activity on the management server
which assumes you know the management server name and have permissions to carry out the action -- neither of which is fulfilled by the ConfigMgr agent.
The ConfigMgr agent pauses the OpsMgr client agent service and also unloads the workflows from the OpsMgr agent (it only did the first part in ConfigMgr 2007). This effectively puts the agent in Maintenance Mode (although to my knowledge this is not directly
reflected in the OpsMgr console).
Jason | http://blog.configmgrftw.com

ECC 6.0 integration with MS Dynamics CRM 2011 on-demand thru PI

Hi Gurus,
sorry in advance if some of my doubts will appear to you experts as stupid....
Scenario: we're on the way to realize the integration between SAP ECC and Microsoft Dynamics CRM Online (so...in the cloud) using SAP PI 7.11. In our scenario SAP PI will be the client, consuming webservices provided by MS CRM.
Unfortunately during the PI configuration (following SAP HELP instructions) we're facing the following problems:
1. The system (PI, dual-stack installation) has the parameter 'ssl/pse_provider' set to 'ABAP'. Considering that we would like to use SSL with SOAP adapter, questions are:
- Can we use the ABAP stack to maintain the PSEs, or it's mandatory to do it into the AS Java in order to use SSL with SOAP adapter.
- If so, we need to switch the ssl/pse_provider parameter to JAVA. Could this change create some kind of problems?
For information, currently in transaction STRUST we only have a Local node, neither Server nor Client nodes.
2. We have already installed the SAP Cryptographic Library for SSL but:
- In NWA we can't find ICM_SSL_<instance_ID> view or CLIENT_ICM_SSL_<instance_ID> keystore view into the list of Keystore Views.
- We would like to change the default Profile into RZ10 but we Can't find the profile...
- MS CRM (ws server) give us only a public certificate but do we need a private key too or we have to generate it from SAP?
- We need to know if is possible to use the MS 'LIVEID' authentication with SAP PI or SAP ECC.
- Do we need additional modules for the SOAP adapter(maybe an Axis one in order to use soap protocol 1.2)?
Could you please suggest the right configuration and give us some tips about this kind of integration?
Thanks a lot,
MR

Hi Mauro,
Looking at your background I thought maybe you could help me out wit this integration question.
I'm looking for some feedback on how best to integrate Microsoft Dynamics AX (DAX) with SAP CRM. We have a PI server.
From reading on the net, I see many people are using a middleware product called Scribe or BizzTalk. We already made an investment with SAP PI and we'd like to use it.
Do you have any references for Microsoft DAX integration with SAP CRM via SAP PI/ XI?
Thanks in advance!

FI/CO integration with PM, PS, MM modules

Hello,
Any body have information about ' FI/CO integration with PM, PS, MM modules
Could you please some explore above topic
Thanks,
Alex

HI Luciano,
It works as designed because of the following reasons:
1. The WBS ID in ERP system must be unique.
2. The phase-id in the cProject is NOT unique, you have e.g. same phase-id for two phases.
That is why the replication does not use the phase-id to create the WBS ID. The internal ID of phase is (default ID during creation of a phase) is used for replication
Though there is a Badi method let you change the the WBS ID, but I would not recommend you to do it because of above reasons.
Kind regards,

[Fwd: Re: Integration with CM Systems ...]

-------- Original Message --------
Subject: Re: Integration with CM Systems ...
Date: Thu, 10 Aug 2000 15:47:21 -0600
From: Cindy Eldenburg <[email protected]>
Organization: BEA Systems, Inc.
Newsgroups: weblogic.developer.interest.personalization
References: <398f3c55$[email protected]>
Prashanth,
The are a lot of differences in what the Documentum does as compared to
Interwoven Teamsite. Comparing these items is like comparing apples and
oranges.
Normally in Teamsite, during the document capture process, a Teamsite
user
categorizes documents by specifying the documents' metadata attributes
using
Teamsite templates. Once the documents are captured, the Interwoven
OpenDeploy
workflow mechanism is used to publish the content to the WLCS database.
Unlike Interwoven Teamsite, Documentum products manage the metadata and
documents in their own repositories. Thus, with this integration, WLCS
queries
the Documentum system at runtime via a specialized JDBC driver supplied
by
Documentum. Once the Documentum user captures a document and tags it
with
metadata attributes, the document may be immediately available to WLCS
(depending on administrative options in Documentum, such as whether
staging is
involved).
Please contact your sales person for a more detailed overview of what
these two
products do and how they interface to WLPS.
Cindy Eldenburg
Prashanth A wrote:
Can anyone explain to me clearly what does Weblogic mean when it says it
integrated with Interwoven and Documentum. Is there any difference in the
way it interacts with Interwoven as compared to Documentum. As in a run-time
interaction with Documentum whereas a static integration with Interwoven

Prashanth,
The are a lot of differences in what the Documentum does as compared to
Interwoven Teamsite. Comparing these items is like comparing apples and
oranges.
Normally in Teamsite, during the document capture process, a Teamsite
user
categorizes documents by specifying the documents' metadata attributes
using
Teamsite templates. Once the documents are captured, the Interwoven
OpenDeploy
workflow mechanism is used to publish the content to the WLCS database.
Unlike Interwoven Teamsite, Documentum products manage the metadata and
documents in their own repositories. Thus, with this integration, WLCS
queries
the Documentum system at runtime via a specialized JDBC driver supplied
by
Documentum. Once the Documentum user captures a document and tags it
with
metadata attributes, the document may be immediately available to WLCS
(depending on administrative options in Documentum, such as whether
staging is
involved).
Please contact your sales person for a more detailed overview of what
these two
products do and how they interface to WLPS.
Cindy Eldenburg
Prashanth A wrote:
Can anyone explain to me clearly what does Weblogic mean when it says it
integrated with Interwoven and Documentum. Is there any difference in the
way it interacts with Interwoven as compared to Documentum. As in a run-time
interaction with Documentum whereas a static integration with Interwoven

Forte integration with LDAP

Hi.
Has anyone successfully integrated with LDAP using the C library from
LDAP SDK?
Currently I'm facing a problem when I tried to generate the C++ wrapper
for the C library. The compiler is unable to resolved the data type of
some data structs. This is because the definition for these structs are
not defined in any of the include files provided. According to the LDAP
SDK doc, this is because the fields for those data structs are not
intended to be accessible to the clients.
That is why in my wrapper project, I defined these struct, each has the
property Opaque = TRUE.
The following is the error message:
BEGIN FILE
Working directory is d:\forte\tmp\cg13\pc_nt\ldapsrch
Processing BOM file: LDAPSrch.bom
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for
80x86
Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
LDAPSrch.cc
LDAPSrch.cc(70) : error C2027: use of undefined type 'BerElement'
LDAPSrch.cc(127) : error C2027: use of undefined type 'LDAP'
LDAPSrch.cc(184) : error C2027: use of undefined type 'LDAPMessage'
LDAPSrch.cc(203) : error C2733: second C linkage of overloaded function
'ldap_init' not allowed
LDAPSrch.cc(204) : error C2733: second C linkage of overloaded function
'ldap_simple_bind_s' not allowed
LDAPSrch.cc(205) : error C2733: second C linkage of overloaded function
'ldap_perror' not allowed
LDAPSrch.cc(206) : error C2733: second C linkage of overloaded function
'ldap_search_s' not allowed
LDAPSrch.cc(207) : error C2733: second C linkage of overloaded function
'ldap_first_entry' not allowed
LDAPSrch.cc(208) : error C2733: second C linkage of overloaded function
'ldap_next_entry' not allowed
LDAPSrch.cc(209) : error C2733: second C linkage of overloaded function
'ldap_get_dn' not allowed
LDAPSrch.cc(210) : error C2733: second C linkage of overloaded function
'ldap_first_attribute' not allowed
LDAPSrch.cc(211) : error C2733: second C linkage of overloaded function
'ldap_next_attribute' not allowed
LDAPSrch.cc(212) : error C2733: second C linkage of overloaded function
'ldap_get_values' not allowed
LDAPSrch.cc(213) : error C2373: 'ldap_value_free' : redefinition;
different
type modifiers
LDAPSrch.cc(214) : error C2733: second C linkage of overloaded function
'ldap_ber_free' not allowed
LDAPSrch.cc(215) : error C2733: second C linkage of overloaded function
'ldap_msgfree' not allowed
LDAPSrch.cc(216) : error C2373: 'ldap_memfree' : redefinition; different
type modifiers
LDAPSrch.cc(217) : error C2733: second C linkage of overloaded function
'ldap_unbind' not allowed
cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__
/DLIBOO_DLL
WIN32_LEAN_AND_MEAN /Id
:\forte\install\inc\cmn /Id:\forte\install\inc\os
/Id:\forte\install\inc\ds
/Id:\forte\install\inc\handles /Id:\forte :\forte\LdapAPIs\include
/FoLDAPSrch.obj /Tp LDAPSrch.cc
So, please advise on how should I proceed.
Thanks in advance.
from: suen
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Anoop,
To adapt an SAP Workflow, you can create a configuration. In this configuration you can redefine values for steps of the workflow definition. These values are evaluated at runtime instead of the values originally defined.
You can configure the following step types:
Activity
User decision
Document from template
Wait
Moreover,Features
You can set the following data individually in the step definition of the configurable step types:
1)Responsible agents
2)Excluded agents
3)Message recipient for completion
4)Priority
5)Requested start
6)Indicator denoting whether the step is included in the    workflow log
7)Activation of a latest end, a latest start, or a requested end with the reaction Send mail
This URL privides info about various workflow codes http://help.sap.com/erp2005_ehp_02/helpdata/en/9b/572614f6ca11d1952e0000e82dec10/content.htm
Regds,
Krutarth
·        Reference date/time for latest end, latest start, and requested end
·        Message recipient for missed deadline
·        Information about the work item display

MV50AFZ1 - Change Accounting Document During PGI

Using MV50AFZ1 User - Exit ,can i change accounting document during PGI.I want to change the Business Area.
If not ,please tell me which User Exit can help me in this.
Thanx,
Viru

Hi
business add-in LE_SHP_GOODSMOVEMENT for ur requirement
Discuss with the abaper and proceed according to ur requirement and be very specific so that it should not influence the others.
This badi during processing of PGI u can change the data related to accounting document.According to ur requirement the business area can be changed during PGI.
Edited by: sameer basha on Mar 25, 2009 7:41 AM

Ask the Expert: C-Series Integration with Cisco Unified Computing System Manager

Welcome to the Cisco Support Community Ask the Expert conversation. This conversation is an opportunity to learn and ask questions about Cisco C-Series Integration with Cisco Unified Computing System® Manager (Cisco UCS® Manager) with Cisco experts Vishal Mehta and Manuel Velasco.
Cisco UCS C-Series Rack-Mount Servers are managed by the built-in standalone software, Cisco Integrated Management Controller (Cisco IMC). When a C-Series rack-mount server is integrated with Cisco UCS Manager, the IMC no longer manages the server. Instead you will manage the server using the Cisco UCS Manager GUI or Cisco UCS Manager command-line interface (CLI).
Cisco UCS Manager 2.2 provides three connectivity modes for Cisco UCS C-Series Rack-Mount Server management. The following are the connectivity modes:
Dual-wire management (shared LAN On Motherboard [LOM]): Shared LOM ports on the rack server are used exclusively for carrying management traffic.A separate cable connected to one of the ports on the Payment Card Industry Express (PCIe) card carries the data traffic.
SingleConnect (Sideband): Using Network Controller Sideband Interface (NC-SI), the Cisco UCS Virtual Interface Card 1225 (VIC1225) connects one cable that can carry both data and management traffic.
Direct Connect Mode: Cisco UCS Manager Version 2.2 introduces an additional rack server management mode using direct connection to the Fabric Interconnect.
Vishal Mehta is a customer support engineer for Cisco’s Data Center Server Virtualization Technical Assistance Center (TAC) team based in San Jose, California. He has been working in the TAC for the past 3 years with a primary focus on data center technologies such as Cisco Nexus® 5000, Cisco UCS, Cisco Nexus 1000V, and virtualization. He presented at Cisco Live in Orlando 2013 and will present at Cisco Live Milan 2014 (BRKCOM-3003, BRKDCT-3444, and LABDCT-2333). He holds a master’s degree from Rutgers University in electrical and computer engineering and has CCIE® certification (number 37139) in routing and switching and service provider.
Manuel Velasco is a customer support engineer for Cisco’s Data Center Server Virtualization TAC team based in San Jose, California. He has been working in the TAC for the past 3 years with a primary focus on data center technologies such as Cisco UCS, Cisco Nexus 1000V, and virtualization. Manuel holds a master’s degree in electrical engineering from California Polytechnic State University (Cal Poly) and CCNA® and VMware VCP certifications. Remember to use the rating system to let Vishal and Manuel know if you have received an adequate response.
Because of the volume expected during this event, our experts might not be able to answer every question. Remember that you can continue the conversation in the Data Center, under subcommunity, Unified Computing, shortly after the event. This event lasts through May 23, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Sebastian,
The different modes of connecting C-Series with UCSM come into play depending on the type of infrastructure you already have along with C-Series and NIC model.
Cisco UCS C-Series Rack-Mount Servers are managed by the built-in standalone software, Cisco Integrated Management Controller (CIMC) .
Powerful features provided by Cisco UCS Manager can be leveraged to manage C-Series server by integrating C-Series Rack-Mount Server with UCSM.
This not only gives you rich-feature set but also one management plane to operate UCS-B Series Chassis and UCS-C Series Rack Server.
You will manage the server using the Cisco UCS Manager GUI or Cisco UCS Manager CLI.
Cisco UCS Manager 2.2 provides three connectivity modes for Cisco UCS C-Series Rack-Mount Server management.
The following are the connectivity modes:
• Dual-wire Management (Shared LOM):
Shared LAN on Motherboard (LOM) ports on the rack server are used exclusively for carrying management traffic. A separate cable connected to one of the ports on the PCIe card carries the data traffic. Using two separate cables for managing data traffic and management traffic is also referred to as dual-wire management.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0100.html
This mode is recommended when you have C-Server which does not have or cannot support VIC 1225 card (such C-200 server)
• SingleConnect (Sideband):
Using Network Controller Sideband Interface (NC-SI), Cisco UCS VIC1225 Virtual Interface Card (VIC) connects one cable that can carry both data traffic and management traffic.
This feature is referred to as SingleConnect.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_011.html
This most recommended Integration model when using FEX and VIC 1225 card
• Direct Connect Mode:
Cisco UCS Manager release version 2.2 introduces an additional rack server management mode using direct connection to the Fabric Interconnect.
This mode will eliminate the need for FEX module as Servers are directly plugged into the base ports of Fabric Interconnect
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0110.html
Please let us know if you need more information. Thank you!
Thanks,
Vishal

While doing fi integration with mm & sd what is the role as a fi consultant

Dear Friends Good Morning,
While doing FI Integration with MM & SD what is the role as a FI Consultant?
Plese let me know what is the configuration need? plese reply me as early as possible
its veryhelpful for me.
Thanks in advance,
babu

Hi
As a FI Consultant should know the FI-MM & FI-SD Integration process. The following Q&A will be useful and FI Consultant has to configure both MM & SD related process based on the requirement.
FI-MM-SD Integration
FI MM account determination:
FI MM settings are maintained in transaction code OBYC. Within these
there are various transaction keys to be maintained like BSX, WRX,
GBB, PRD etc. In each of these transaction keys you specify the GL
accounts which gets automatically passed at the time of entry.
Few examples could be: BSX- Stands for Inventory Posting Debit
GBB-Standsfor Goods Issue/Scrapping/delivery
of goods etc
PRD- Stands for Price Differences.
Q: what level is the FI-MM, FI-SD account determination settings?
A: They are at the chart of accounts level.
Q: What are the additional settings required while maintaining or
creating the GL codes for Inventory accounts?
A: In the Inventory GL accounts (Balance sheet) you should switch on the
u2018Post automatically onlyu2019 tick. It is also advisable to maintain the
aforesaid setting for all FI-MM accounts and FI-SD accounts. This helps
in preserving the sanctity of those accounts and prevents from having
any difference between FI and MM, FI and SD.
Q: What is Valuation and Account assignment in SAP?
A: This is actually the link between Materials Management and Finance.
The valuation in SAP can be at the plant level or the company code level.
If you define valuation at the plant level then you can have different
prices for the same material in the various plants. If you keep it at the
company code level you can have only price across all plants.
Valuation also involves the Price Control .Each material is assigned to a
material type in Materials Management and every material is valuated
either in Moving Average Price or Standard Price in SAP. These are the
two types of price control available.
What is Valuation Class?
The Valuation Class in the Accounting 1 View in Material Master is the
main link between Material Master and Finance. This Valuation Class
along with the combination of the transaction keys (BSX,WRX,GBB,PRD )
defined above determine the GL account during posting.
We can group together different materials with similar properties by
valuation class. Eg Raw material,Finsihed Goods, Semi Finished
We can define the following assignments in customizing :
All materials with same material type are assigned to just one valuation
class.
Different materials with the same material type can be assigned to
different valuation classes.
Materials with different material types
Q: What is the accounting entry in the Financial books of accounts
when the goods are received in unrestricted use stock? Also
mention the settings to be done in the u2018Automatic postingsu2019 in SAP
for the specific G/L accounts.
A: On receipt of the goods in unrestricted-use stock, the Inventory account
is debited and the GR/IR account gets credited. In customization, in the
automatic postings, the Inventory G/L account is assigned to the
Transaction event key BSX and the GR/IR account is assigned to the
Transaction event key WRX.
Q: How do you configure FI-SD account determination?
The FI-SD account determination happens through an access sequence.
The system goes about finding accounts from more specific criteria to
less specific criteria.
This is the sequence it would follow:
1) It will first access and look for the combination of Customer
accounts assignment grp/ Material account assignment grp/
Account key.
2) If it does not find the accounts for the first combination it will look
for Customer account assignment grp and account key
combination.
3) Furthermore, if it does not find accounts for the first 2 criteriau2019s
then it will look for Material account assignment grp/Account key.
4) If it does not find accounts for the all earlier criteriau2019s then finally it
will look for Account key and assign the GL code.
Thus posting of Sales Invoices into FI are effected on the basis of a
combination of Sales organization, Account type, or Customer and
Material Account assignment groups and following are the options
available.
a. Customer AAG/Material AAG/Account type
b. Material AAG/Account type
c. Customer AAG/Account type
For each of this option you can define a Gl account. Thus the system
uses this gl account to automatically pass the entries.
All the best.
Regards
GB

The problem with forecast reports in SCOM 2012 after integration with VMM 2012

Hello.
I have problem with forecast reports in SCOM 2012 after integration with VMM 2012. All other reports (not forecasting) works fine. For example, report “Host Group Forecasting” don’t work. The report is generated, but I have error: “Subreport
could not be shown”. I find only errors in SQL Server Reporting logs like this:
library!ReportServer_0-13!1758!06/26/2012-18:26:23:: i INFO: RenderForNewSession('/Microsoft.SystemCenter.VirtualMachineManager.2012.Reports/Microsoft.SystemCenter.VirtualMachineManager.2012.Report.ForecastHostGroup')
processing!ReportServer_0-13!1758!06/26/2012-18:26:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Не удалось выполнить
запрос для набора данных "DiskSpaceUsageForecasting". ---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Execution of the managed stored procedure GetTimeSeriesForecast failed with the following error: Exception has been thrown by
the target of an invocation..
Query (5, 58) Parser: The syntax for '6' is incorrect.
   at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.IExecuteProvider.ExecuteTabular(CommandBehavior behavior, ICommandContentProvider contentProvider,
AdomdPropertyCollection commandProperties, IDataParameterCollection parameters)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunEmbeddedQuery(Boolean& readerExtensionsSupported, Boolean& readerFieldProperties, List`1 queryParams, Object[] paramValues)
   --- End of inner exception stack trace ---;
The Russian string “Не удалось
выполнить запрос для набора данных "DiskSpaceUsageForecasting"” is translated to “Could not execute query for data set "DiskSpaceUsageForecasting"”.
I have clean installation SCOM 2012 RU1, VMM 2012 RU1. Integration SCOM with VMM work fine.
SQL collation for all SQL DB instances (SCOM and VMM and SCOM reporting) – “SQL_Latin1_General_CP1_CI_AS”
SQL Analysis service: SQL collation – “Latin1_General” ; language for the server – English (United States)
I think the problem in regional settings. By my opinion there are two possible mistakes:
SQL collation for all SQL DB instances. May be need use “Latin1_General_CI_AS”
as provided by
http://blogs.technet.com/b/momteam/archive/2012/05/25/clarification-on-sql-server-collation-requirements-for-system-center-2012.aspx
Need change regional setting. Question is for what (OS regional setting, SQL Analysis service settings,…) ?

Error: Subreport could not be shown
Opening a report for Client Security might result in the following error being displayed in one or more areas of the report: "Error: Subreport could not be shown."
Background
There are two possible reasons for this error:
1. Wrong location   The reporting server is pointing to the wrong computer running SQL Server or a SQL Server instance.
2. Insufficient permissions   The account configured (in SQL Server Reporting Services) to connect to the reporting database does not have appropriate permissions for the database.
Solution
To determine which reason is causing the error, attempt to directly open the subreport reporting the error, by clicking the name of the subreport.
If the reporting server is pointing to a wrong location, the report displays an error similar to the following:
Error message
An error has occurred during report processing.
Cannot create a connection to data source 'SystemCenterReporting'. Cannot open database "SystemCenterReporting" requested by the login. The login failed. Login failed for user username.
To verify the correct SQL Server computer and instance path
In Report Manager, navigate to the report generating the error and click the Properties tab.
Click Data Sources and under a Shared data source, note the path.
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is: http://hostname/Reports/
If you chose to secure the viewing of reports with HTTPS, the URL is: https://hostname/Reports/
Click SCDW.
In the Connection type list, ensure that Microsoft SQL Server is selected.
In the Connection string box, ensure that the correct SQL Server computer and instance name are entered.
Note:
A period (.) denotes the local computer.
If the account has insufficient permissions, the report displays an error similar to the following:
Error message
An error has occurred during report processing. (rsProcessingAborted) Query execution failed for data set 'DSDashboardComputersTrend'. (rsErrorExecutingCommand) EXECUTE permission denied on object 'prSAS_UX_DashboardComputersTrend', database 'SystemCenterReporting',
schema 'dbo'.
To determine if you are experiencing the SQL Server permissions issue
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is:http://hostname/Reportserver/
If you chose to secure the viewing of reports with HTTPS, the URL is:https://hostname/Reportserver/
Click Microsoft Operations Manager Reporting, click Microsoft Forefront Client Security, and scroll to DashboardComputersTrend.
Click DashboardComputersTrend.
If you are experiencing a SQL Server permissions issue, an error similar to the preceding error appears.
To grant permissions to the SQL Server computer
1. In Report Manager, click SCDW and note the account in the Connect using section. This is the account under which the database is contacted.
2. On the server with the System Center Reporting database, start SQL Server Management Studio.
3. In the tree, expand Security, and then expand Logins. Do one of the following:
If the user account is listed, right-click the account, click Properties, and then go to step 5.
If the user account is not listed, right-click Logins and choose New Login.
4. In the Login name box, enter the user account (domain\username).
5. In the Login Properties dialog box, click User Mapping, and then under Users mapped to this login, select the System Center Reporting check box.
6. Under Database role membership for: System Center Reporting, select the db_owner check box, and then click OK.
Thanks,
Yog Li
TechNet Community Support

Undestanding the OSM-AIA integration with SAF agent for RODOD 11gr2.

Hello all,
As we don't yet manage the sending of sales orders from AIA 11.1 to OSM 7.2, I looking for some information about the way AIA and OSM may be integrated with SAF agents.
During the installation of the O2A cartridges in Design Studio, the SAF agent has been choosed against the JMS bridge approach.
So in OSM's WebLogic domain,
- a SAF agent is created
- JMS resources are created in the oms module:
-      a Remote SAF Context describing the way to be connected to the AIA's weblogic instance
- the remote imported destintations i.e.:
AIA_CRTBO_OUT_JMSQ
     AIA_CRTCUST_OUT_JMSQ
     AIA_CRTFO_OUT_JMSQ
     AIA_CRTTTREQ_JMSQ
     AIA_FOPROV_OUT_JMSQ
     AIA_LFERROR_JMSQ
     AIA_UPDSO_OUT_JMSQ
     AIA_UPDTTREQ_JMSQ
Sending an order from Siebel to AIA fills an AIA_FOPROV_IN_JMSQ on the AIA database which seems to be not consumed because on the OSM side, no order is ssen in the oms_ws_requests queue.
So, we are wondering if the Order to cash PIP in AIA is incomplete or not. Should be a SAF-agent in AIA to send orders to OSM? Should we complete the current SAF-Agent in OSM to receive and send messages to AIA?
To integrate ASAP or UIM to OSM, it is recommended to define a SAF-Agent in OSM to send messages and a SAF-Agent in ASAP/UIM to reply to OSM. It lets me think that our AIA installation is incomplete.
On the other side, when JMS bridges are used in OSM in 7.0.2, a bridge called created AIA_2_CFS_CreateOrder_is defined to locate and consume the remote JMS queue AIA_CRTFO_IN.
In conclusion, we'd like some explanations on the way to integrate as well as possible AIA and OSM in a SAF context. It will help use quite a lot.
Many thinks in advances.
Regards,
Christophe.

Hi
On OSM side should exist SAF agent for sending messages to AIA queue's and same on AIA side for sending to OSM queue's. You can even combine SAF agaent on one direction and bridge's in another direction but you'll have to do it manually in that case.
If you see message in AIA queue and not forwarding to OSM I would first check SAF agent on AIA side ( usr/pass + remote destination (OSM) )
best regards
Tomac

Manual Price during PGI

Dear Forum,
Can it be possible during Post Goods Issue to enter manual price....In standard, it picks the price from Material Master...
But at my clients site in one scenario they want to put manual price during PGI...
Can anyone throw some light on the above said issue...
Eagerly waiting for your helpful replies..
Regards
Nainesh
SAP ECC6.0

Hi Nainesh,
If you want to change price of goods sold (VPRS condition type) in the delivery, this is not possible in the standard system; personally I would not mess with standard SAP based on the requirement alone.
But at my clients site in one scenario they want to put manual price during PGI...
If your consulting customer wants a special price for the goods, you can suggest them to use split valuation, therefore the PGI value will be based on the value of the individual batch delivered to the customer (if the batch is the criteria you use for split valuation).
If you want to change the sales price, change it in the sales order.
Pricing in the delivery is only used for special functions in the standard system.
Best Regards,
Franck

Call BAPI to Create Invoice During PGI(VL01N) via BADI

Hi,
Requirement: During PGI (VL01N), we have implemented a BADI (IF_EX_DELIVERY_PUBLISH) in method (PUBLISH_AFTER_SAVE) to call BAPI (BAPI_BILLINGDOC_CREATEMULTIPLE) to create invoice simultaneously with the PGI. In DEV box, the call BAPI is working fine (invoice is created). However in QA box there is a update termination occuring in the call BAPI, thus no invoice is being created. The thing is, how do I locate why the BAPI is terminating in QA but not in DEV? Is the BADI used correct? I have searched SAP Notes related to this termination when doing PGI in VL01N. Up to now we still do not know why in DEV is okay in QA it is not.
SAP Notes:
782447 Runtime error SAPSQL_ARRAY_INSERT_DUPREC when posting GIs
777409 Foreign trade: Update termination EXPIMP_POSTING
ST22 dump analysis:
In the source code you have the termination point in line 51
of the (Include) program "LV50EU05".
The program "SAPLV50E" was started in the update system.
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
procedure "EXPIMP_POSTING" "(FUNCTION)", but it was neither handled locally nor
declared
in the RAISING clause of its signature.
The procedure is in program "SAPLV50E "; its source code begins in line
1 of the (Include program "LV50EU05 ".
Source code:
DESCRIBE TABLE XEIKP LINES LIN.
IF LIN GT 0.
INSERT EIKP FROM TABLE XEIKP. <<< the dump is happening in this standard logic
REFRESH XEIKP.
ENDIF.
Edited by: Mawi C. Ng on Sep 2, 2009 2:24 PM

Hi,
Based on the DUMP i can say that in the below statement :
INSERT EIKP FROM TABLE XEIKP. <<< the dump is happening in this standard logic
The program is trying to insert lines which have duplicate key values check the btable XEIKP at this point and see if the records that are there do they have key fields values that already exist. You can put a break-point at that statement and check.
Regards,
Himanshu

Integration with CM Systems ...

Can anyone explain to me clearly what does Weblogic mean when it says it
integrated with Interwoven and Documentum. Is there any difference in the
way it interacts with Interwoven as compared to Documentum. As in a run-time
interaction with Documentum whereas a static integration with Interwoven

Prashanth,
The are a lot of differences in what the Documentum does as compared to
Interwoven Teamsite. Comparing these items is like comparing apples and
oranges.
Normally in Teamsite, during the document capture process, a Teamsite
user
categorizes documents by specifying the documents' metadata attributes
using
Teamsite templates. Once the documents are captured, the Interwoven
OpenDeploy
workflow mechanism is used to publish the content to the WLCS database.
Unlike Interwoven Teamsite, Documentum products manage the metadata and
documents in their own repositories. Thus, with this integration, WLCS
queries
the Documentum system at runtime via a specialized JDBC driver supplied
by
Documentum. Once the Documentum user captures a document and tags it
with
metadata attributes, the document may be immediately available to WLCS
(depending on administrative options in Documentum, such as whether
staging is
involved).
Please contact your sales person for a more detailed overview of what
these two
products do and how they interface to WLPS.
Cindy Eldenburg
Prashanth A wrote:
Can anyone explain to me clearly what does Weblogic mean when it says it
integrated with Interwoven and Documentum. Is there any difference in the
way it interacts with Interwoven as compared to Documentum. As in a run-time
interaction with Documentum whereas a static integration with Interwoven

Regd SD integration with FI during PGI..

Similar Messages

Maybe you are looking for