Registering Existing Server on new ODSEE 11.1.1.7 DSCC

The DSCC from 11.1.1.5 allowed you to register existing servers and gave you the option to add a new host and use a different port. I am running DSCC on one machine and would like to register and monitor all my servers from this one DSCC GUI. It makes it really easy to verify that all my servers are up and running by looking at the list of all my local and remote directory servers. I just installed 11.1.1.7 and went to register an existing server. It only defaults to the local host and port 3779 and you cannot change it or add a new remote host. Does this mean with 11.1.1.7, you can only create and register servers on the local host that DSCC is running? If there is a new way to do it, I could not find it in the documentation. Any help would be appreciated.

Multiple DSCC environment is possible.
I did it in this way:
1) Unzip the binaries on both HOST_A and HOST_B
2) Create the DSCC registry on HOST_A
3) Create the DSCC agent on HOST_A and register it on DSCC on HOST_A
4) Create the DSCC agent on HOST_B and register it on DSCC on HOST_A (use the -h option)
5) Start the agent on HOST_A
6) Start the agent on HOST_B
7) Create dscc7.war on HOST_A
8) Deploy DSCC on a WebContainer on HOST_A
9) Create the DSCC registry on HOST_B
10) Create the DSCC agent on HOST_B and register it on DSCC on HOST_B (it will use a different port)
11) Create the DSCC agent on HOST_A and register it on DSCC on HOST_B (use the -h option)
12) Start the new agent on HOST_A
13) Start the new agent on HOST_B
14) Create dscc7.war on HOST_B
15) Deploy DSCC on a WebContainer on HOST_B
My config looks like this:
HOST_A
bash-3.00# /opt/dsee7/bin/dsccreg list-agents
Enter DSCC administrator's password:
Hostname      Port  Certificate  Type        Owner  Flags  iPath                     Description
opensso-dev1  3997  undefined    DSCC_AGENT  root   -      /opt/dsee7/var/dcc/agent  -
opensso-dev2  3997  undefined    DSCC_AGENT  root   -      /opt/dsee7/var/dcc/agent  -
2 agent(s) displayed
bash-3.00#
HOST_B
bash-3.00# /opt/dsee7/bin/dsccreg list-agents
Enter DSCC administrator's password:
Hostname      Port  Certificate  Type        Owner  Flags  iPath                      Description
opensso-dev1  7995  undefined    DSCC_AGENT  root   -      /opt/dsee7/var/dcc/agent2  -
opensso-dev2  7995  undefined    DSCC_AGENT  root   -      /opt/dsee7/var/dcc/agent2  -
2 agent(s) displayed
bash-3.00#

Similar Messages

  • Register existing guest with new VM Manager

    Ok,
    So I have built a new VM server environment.
    New Pool, New Manager .. etc.
    I have restored some large guests to the running_pool directory
    I can start them and use them with xm create and the work fine.
    What are the commands to register them with the VM manager?
    (Hopefully I don't have to put them in the templates area and import them as that will give me 2 copies and I dont have the space for that.)
    Thanks in advance.
    Rod

    Sorry. My Bad.
    I have found it, but it wasn't where I expected.
    For those of you who find this thread looking for the same thing, here is the answer.
    1 Shutdown the machine if you started it with xm create
    2 Select resources tab
    3 Select "Virtual machine Images" sub-tab
    4 Select import button
    5 Select "Select from server pool(Discover and Register)"
    6 You should then be able to select your server pool and import the VMs you have already placed in running_pool
    Thanks
    Rod

  • Replace existing server with new server

    Good Day Guys,
    Could you please throw some light on the issue below,
    Our QAS is down for more than a month and we are having problems with the server on hardware side,so our company has decided to scrap up the old server and bring a new server in its place.
    Could you please share your ideas as of how to proceed from having new server.My concerns.
    Installing sap and Mssql from scratch naming same as our old server.Here im stuck.......whether to install a new database and do DB refresh from the production database.
    Please post me all the activities to considered for a new installation and to have a copy of production installed on it.
    thanks in advance,

    Hi,
    This is how you should proceed.
    1. Take a full backup of your production - make sure it is successful.
    As you cannot use the sql server detach/attach from production - you will have to do a backup and restore.
    2. Uninstall your quality - the uninstall steps are there in the installation guide.
    3. Install your QAS using SAPINST as per the homogeneous system copy installation guide. And select the option db using "backup/restore" when SAPINST asks for it.
    4. Restore the database using the production backup and logs via the SQL Server Enterprise Manager.
    5. You will have to change your schema names by following the sap note 551915 - this is only needed if your SAP system uses the MCOD convention of the form SAP<SID>.
    Also, check these SAP Notes 151603, 193816for a SQL Server Copy.
    Hope this helps.
    Reg, Dibya

  • Cannot add a new server in existing server pool

    Hi,
    I am trying to add a new server into an existing server pool.
    I have the same agent password, the same root password (i don't think is important).
    It disovers the server and is on unassigned Servers.
    When trying to add into existing server pool it fail with:
    Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: vmsibm2 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 configure_server_for_cluster lun /dev/mapper/35000144f85151729 0004fb0000050000c696b251dc81a087 , Status: org.apache.xmlrpc.XmlRpcException: exceptions.OSError:[Errno 2] No such file or directory
    Any ideeas?
    Regards
    Nicolae

    Hi,
    I can see your point...
    From my error :Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 configure_server_for_cluster lun /dev/mapper/35000144f85151729 0004fb0000050000c696b251dc81a087 , Status: org.apache.xmlrpc.XmlRpcException: exceptions.OSError:[Errno 2] No such file or directory
    /dev/mapper/35000144f85151729 is the path where the server pool uses for it's own...
    and
    0004fb0000050000c696b251dc81a087 is the Pool file System...
    On storage menu, at SAN Servers - Unmanaged iSCSI Storage Array - where I see my storage wich is with iSCSI at Add/Remove Admin Servers I added this new server.
    Also I went to Rescan Physical Discks for my new server.
    When I go with putty on my server and run
    df -h
    I don't see any storage...
    I belive I missed one step but I can't find wich one...
    Regards
    Nicolae

  • Upgrading Hyperion 9.3.1 to 11.1.2.1 in the Existing Server.

    Hi All,
    I am in need of your valuable suggestions. We are in process of upgrading Hyperion 9.3.1 to 11.1.2.1 in the existing server. I have got only 2 environments namely Dev & Prod. So I have to do everything in one server only to upgrade to ensure its working. Currently we have got Shared Services, HFM (EPM application not Classic), Workspace,Hyperion Performance Management Architect,FR & Web Analysis & FDM in 9.3.1 version.I know first i need to upgrade from 9.3.1 to 9.3.3 and then to 11.1.2.1.My question is that after successful upgrade to 9.3.3 how i am going to upgrade to 11.1.2.1 in the same server. i was informed by oracle to create a new Drive in the server and there you can install & configure it. I have few questions
    * How the shared services will be upgraded. Do i need to point it to the existing (9.3.3) database.If Yes, will it work as i can't roll back.
    *I read that in 11.1.2.1 there is a Utility HSSMIGRATE.BAT which we are supposed to run and it will create a ZIP which need to point during the 11.1.2.1
    configuration. I am not sure whether its going to work or not.
    * Have also read if there is Performance Management Architect then there are certain activities which need to be carried out.
    * What Back should i take?
    * How to upgrade HFM from 9.3.1 to 9.3.3 to 11.1.2.1
    * Read that FDM need to be deleted if you want to upgrade it to 9.3.3 from 9.3.1 and then again reinstall it for 11.1.2.1.Please suggest how to go about it.
    Please suggest if there can be any other approach also.Can any one tell for shared services can it be possible that i export the security through CSSEXPORTUTILITY in 9.3.3. Shared Services and then Import it back in 11.1.2.1.Would request you to provide me as much information as you can.
    Thanks in Advance.

    Answers:
    * How the shared services will be upgraded. Do i need to point it to the existing (9.3.3) database.If Yes, will it work as i can't roll back.
    1.After installation of 11.1.2.1,you will have to run configuration utility and point to existing database which will upgrade HSS.The hssmigrate utility will provide a zip file which should be used as well.The configuration utility will have option to "import data from earlier release"
    *I read that in 11.1.2.1 there is a Utility HSSMIGRATE.BAT which we are supposed to run and it will create a ZIP which need to point during the 11.1.2.1
    configuration. I am not sure whether its going to work or not.
    2.Refer (1).The utility is tested and supported so should work from you also.If having problems then get in touch with Oracle support.
    * What Back should i take?
    3.Every thing ----repository,filesystem etc.
    You can refer to backup and recovery guide which should have what to be backedup for each component.
    * How to upgrade HFM from 9.3.1 to 9.3.3 to 11.1.2.1
    Refer (1)
    Hope this helps

  • Methods for migrating existing servers to new hardware

    I have 10 Solaris 8 and 9 boxes (SF4800 and V480). We are moving these to new hardware (V490 and V440).
    All have mirrored boot disks, some using VxVM and some using SDS. All are connected to SAN storage (Sun 3900 and EMC).
    I am looking for the easiest, simplest and least risky method to migrate.
    Possible methods:
    1) Pull boot disk from existing server, move to new server. Issues: drive compatibility between old and new servers.
    2) Flasharchive to NFS server, install new servers from flash image. Issues: SDS/VxVM encapsulation?, old server Solaris versions do not support new server hardware.
    3) Break boot disk mirrors, Live upgrade to latest Solaris 9 on this disk, then Flasharchive this image to NFS server. Issues: none that I can think of.
    Any input/ideas are appreciated.

    Hi,
    I am not an expert in Portal Migrations but I would suggest you to do a homogenous system copy, then restore it on SLES10 32-bit and then migrate it to 64 bit. But you need to do a fair amount of homework before you carry out this exercise.
    Even if you are not touching the database, I would suggest going for a homogenous system copy. The reason being, there are some database related files stored on Portal server and whenever you restart the Portal server, it's gonna check the timestamps there with the ones available on DB. We ran with a problem once doing the same. We were using Oracle then.
    Secondly, before taking a decision to move over to 64-bit, I would suggest you to check the PAM and have a look whether all the portal components are supported or not. We had a problem with HP-IA64 bit because we finally found out that it doesn't support Adobe Document Services. So things like these need to be thought over and confirmed before stepping forward.
    Hope this helps.
    Cheers,
    Sunil
    PS: Reward points for helpful answers.

  • Transfer an existing server?

    I have setup 10.6.8 server on mac Mini.  It is sitting at the "Transfer an Existing Server?" prompt. (It says, "if you are replacing an existing mac server, you can connect to it and transfer it's information to this new server....You will NOT be able to migrate from another server at a later time"
    I was told by apple genius that I could connect this mac mini to my old server by lan cable direct, and transfer. (like how migration assistant usually works)
    Problem is it didn't recognize the old server when I did this.
    How can I get the new server to recognize the old server to be able to transfer?  Obviously, I can't reboot the new server yet, it's sitting at a point waiting for "something" to show up for it to recognize.

    Ask Apple? 
    AFAIK, the transfer is not permissible via LAN.
    AFAIK, the transfers are only local via FireWire or Thunderbolt (and you'll need a match between what the old and the new Mac Mini Server supports), or via a USB-connected local disk.
    The way I usually do this is with Disk Utility.  Creating an external backup on a USB disk - boot the installer DVD on the old Mac Mini Server, and run Disk Utility from the Utilities menu and create an external copy of the disk - then transfer and connect that disk to the new Mac Mini Server.  I use this "backup of the original server" as the source, too; I use the original disk in the Mac Mini as the "backup copy".  (This obviously assumes a one-disk configuration; on the newer Mac Mini Server boxes, I usually RAID the internal disks.)
    And you should be able to shut down and restart the new Mac Mini Server and get back to that transfer section.  At worst, you'll restart the installation from the recovery partition, and get back to that transfer prompt that way.

  • An error when registering SQL server driver

    Hi
    I have got the following error when register SQL server drive
    "RemoteMsDataBase.java": Error #: 302 : cannot access class com.microsoft.jdbc.sqlserver.SQLServerDriver; neither class nor source found for com.microsoft.jdbc.sqlserver.SQLServerDriver at line 19, column 63
    the code that cause error
    // register the SQL driver
    DriverManager.registerDriver(new com.microsoft.jdbc.sqlserver.SQLServerDriver());
    // connect to the DB by using the driver.
    String connString = "my_dbserver:1433;databasename=my_database";
    String strDBConnect = "jdbc:microsoft:sqlserver://" + connString;
    conn = DriverManager.getConnection(strDBConnect, userName, passwd);
    To include jars to my classpath do this:
    javac -deprecation -classpath msbase.jar;msutil.jar;mssqlserver.jar *.java

    javac -deprecation -classpath msbase.jar;msutil.jar;mssqlserver.jar *.javaSpecify the full path for jar(s), example,
    javac -deprecation -classpath .;c:\myjars\msbase.jar;c:\myjars\msutil.jar;c:\myjars\mssqlserver.jar *.java
    Hope it works.
    Sudha

  • How to change the Existing alias with new alias name...MAXL SCRIPT

    HI Experts
    I need to change alias name of the existing member with new alias name.
    please send me maxl code to change the alias name .
    My thought is
    1) Old alias should be replaced with new alias name .
    2)There is one account that should be rolled out to another parent..these parents are already exsist
    3) I need a MAXL Script to change the new alias name .
    please suggest ASAP.
    Thanks
    USER

    John
    I heard that we can replace existing alias name with new alias thru MAXL
    i.e replace alias name XXXX member with YYYY ;
    please correct me if iam wrong ,might be Maxl command is wrong but this is the idea.
    Thanks
    USER

  • We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is: Cannot send mail. The user name or password for iCloud is incorrect.

    We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.

    About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone.  Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc.  This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...

  • TS1559 I have done all of the steps that Apple have said to do, including completely restarting my phone and registering it as a new one, but still my wifi is greyed out, can anyone help me?

    I have done all of the steps that Apple have said to do, including completely restarting my phone and registering it as a new one, but still my wifi is greyed out, can anyone help me?

    http://support.apple.com/kb/ht5621

  • I can no longer update existing or download new apps onto my MacBook Pro of late?

    I can no longer update either existing; or download new apps any more on My MacBook Pro? This is a new thing, and seems to have coincided with getting my new iPhone 4S the week before last? If had the MacBook since Dec 2010, and this is the first time I've experienced this problem. The message is always the same: "We could not complete your request. There was an error in the App Store. Please try again later (null)" But every day for well over a week, the message never changes. At first I thought it was the fact that I had the same Username and Password for both app store accounts, so I changed the one Password, but that hasn't resolved the problem either. Does anyone have a fix for this bug?

    I should have added that the iTunes app is not displayed on my phone in order for me to add the apps.

  • Calendar Server Error: At least one sharee was not recognized by the server. New invitations have not been sent.

    I deployed a Mountain Lion Server with the calendar service active. Every time a user tries to share a calendar they have created under thier account to an external person using thier email address, the server gives the following error: "At least one sharee was not recognized by the server. New invitations have not been sent."
    Invites to share a calendar to OD accounts on the server seem to work fine.
    I have a calendar specific email address for external invites set up. The server seems to send individual event invites to external email addresses just fine, so I am thinking the email is working. Email is not served on the Mountain Lion Server. The account is through Google Apps using IMAP and SMTP.
    What's even stranger, is that there doesn't seem to be any message in the Calendar error logs.
    I've tried creating a new test account and no luck.
    I don't know what else to try.
    Thanks in advance for any help!

    another 3rd party sofwtare that allows you opent he backup and grab info
    http://www.processtext.com/abcblackberry.html
    trial for 30 days, good program for that 30 days, I hear they arent a pleasant company to purchase from though

  • Just bought a used MacBook pro after my previous died. I want to migrate my applications, data, etc from a time machine backup of the old computer to the new. Will this affect, or overwrite the Apps., data, etc existing on the new machine?

    Just bought a used MacBook pro after my previous died. I want to migrate my applications, data, etc from a time machine backup of the old computer to the new. Will this affect, or overwrite the Apps., data, etc existing on the new machine?

    No. Only those Apps that are not installed on the new will migrate over.

  • This script is not checking the existing of the new created item

    Dear Friends
    I have This script is not checking the existing of the new created item I am using this script in side WHEN-BUTTON-PRESSED trigger
    I am using oracle Forms [32 Bit] Version 6.0.8.11.3 (Production)
    My script as the following :
    BEGIN
    BEGIN
    SELECT ITEM_CODE INTO :GLOBAL.DUMMY
    FROM IM_INVENTORY
    WHERE ITEM_CLASS = TO_NUMBER(RTRIM(LTRIM(:IM_NEW_ITEMS.ITEM_CLASS)))
    AND ITEM_TYPE = TO_NUMBER(RTRIM(LTRIM(:IM_NEW_ITEMS.ITEM_TYPE)))
    AND ITEM_LENGTH = :IM_NEW_ITEMS.ITEM_LENGTH
    AND ITEM_WIDTH = :IM_NEW_ITEMS.ITEM_WIDTH
    AND ITEM_HIGHT1 = :IM_NEW_ITEMS.ITEM_HIGHT1
    AND ITEM_HIGHT2 = :IM_NEW_ITEMS.ITEM_HIGHT2
    AND COLOR_CODE = TO_NUMBER(RTRIM(LTRIM(:IM_NEW_ITEMS.COLOR_CODE)))
    AND SHAPE_CODE = TO_NUMBER(RTRIM(LTRIM(:IM_NEW_ITEMS.SHAPE_CODE)));
    -- get_err_message(87);
    SHOW_MESSAGE('This Item Already Exist !!!');
    RAISE FORM_TRIGGER_FAILURE;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    show_message('here');
    INSERT INTO IM_INVENTORY
    (ITEM_CODE,ITEM_NAME_A,ITEM_NAME_E,STOCK_ITEM,ITEM_CLASS,ITEM_TYPE,SUPP_CODE,ITEM_LENGTH,ITEM_WIDTH,
    ITEM_HIGHT1,ITEM_HIGHT2,COLOR_CODE,SHAPE_CODE,ITEM_SIZE_TYPE,VOLUME,CON_FACTOR,ITEM_PRICE1,
    ITEM_DISCOUNT,MIN_QTY,MAX_QTY,COSTING_METHOD,ITEM_COST,STANDARD_COST,WEIGHT,ITEM_PRICE2,ITEM_PRICE3,
    OPENING_COST,LAST_PUR_COST,QTY_FOR_PRICE2,QTY_FOR_PRICE3,ITEM_PRICE_METHOD,USER_ID,USER_DATE)
    VALUES(:IM_NEW_ITEMS.ITEM_CODE,:GLOBAL.LOC_VAR_A,:GLOBAL.LOC_VAR_E,'1',:IM_NEW_ITEMS.ITEM_CLASS,:IM_NEW_ITEMS.ITEM_TYPE,'0',
    :IM_NEW_ITEMS.ITEM_LENGTH,:IM_NEW_ITEMS.ITEM_WIDTH,:IM_NEW_ITEMS.ITEM_HIGHT1,:IM_NEW_ITEMS.ITEM_HIGHT2,
    NVL(:IM_NEW_ITEMS.COLOR_CODE,0),NVL(:IM_NEW_ITEMS.SHAPE_CODE,0),1,NVL(:IM_NEW_ITEMS.VOLUME,0),1,:GLOBAL.ITEM_PRICE1,0.00,0.00,0.00,'1',0.00,0.00,
    0.00,:GLOBAL.ITEM_PRICE1,:GLOBAL.ITEM_PRICE1,0.000,0.000,0.000,0.000,1,:IM_NEW_ITEMS.USER_ID,:IM_NEW_ITEMS.USER_DATE);
    standard.commit; -- NEW COMMITED
    clear_message; -- NEW COMMITED
         WHEN FORM_TRIGGER_FAILURE THEN
         SHOW_MESSAGE('Error : '||SQLERRM);
    RAISE FORM_TRIGGER_FAILURE ;
    WHEN OTHERS THEN
    SHOW_MESSAGE('Error : '||SQLERRM);
    RAISE FORM_TRIGGER_FAILURE ;
    END;
    END;
    Waiting for your valuable answer .
    Best regards
    Jamil Alshaibani

    Hi,
    I have written the script also with constants values but still it is not going to
    SHOW_MESSAGE('This Item Already Exist !!!');
    and the script is written as the following :
    BEGIN
    SELECT 1 INTO :GLOBAL.DUMMY
    FROM IM_INVENTORY
    WHERE ITEM_CLASS ='110'
    AND ITEM_TYPE ='110105'
    AND ITEM_LENGTH = 1
    AND ITEM_WIDTH = 1
    AND ITEM_HIGHT1 = 1
    AND ITEM_HIGHT2 = 0
    AND COLOR_CODE = '3001'
    AND SHAPE_CODE = '201' ;
    SHOW_MESSAGE('1- This Item Already Exist !!!');
    RAISE FORM_TRIGGER_FAILURE;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    show_message('here');
    INSERT INTO IM_INVENTORY
    (ITEM_CODE,ITEM_NAME_A,ITEM_NAME_E,STOCK_ITEM,ITEM_CLASS,ITEM_TYPE,SUPP_CODE,ITEM_LENGTH,ITEM_WIDTH,
    ITEM_HIGHT1,ITEM_HIGHT2,COLOR_CODE,SHAPE_CODE,ITEM_SIZE_TYPE,VOLUME,CON_FACTOR,ITEM_PRICE1,
    ITEM_DISCOUNT,MIN_QTY,MAX_QTY,COSTING_METHOD,ITEM_COST,STANDARD_COST,WEIGHT,ITEM_PRICE2,ITEM_PRICE3,
    OPENING_COST,LAST_PUR_COST,QTY_FOR_PRICE2,QTY_FOR_PRICE3,ITEM_PRICE_METHOD,USER_ID,USER_DATE)
    VALUES(:IM_NEW_ITEMS.ITEM_CODE,:GLOBAL.LOC_VAR_A,:GLOBAL.LOC_VAR_E,'1',:IM_NEW_ITEMS.ITEM_CLASS,:IM_NEW_ITEMS.ITEM_TYPE,'0',
    :IM_NEW_ITEMS.ITEM_LENGTH,:IM_NEW_ITEMS.ITEM_WIDTH,:IM_NEW_ITEMS.ITEM_HIGHT1,:IM_NEW_ITEMS.ITEM_HIGHT2,
    NVL(:IM_NEW_ITEMS.COLOR_CODE,0),NVL(:IM_NEW_ITEMS.SHAPE_CODE,0),1,NVL(:IM_NEW_ITEMS.VOLUME,0),1,:GLOBAL.ITEM_PRICE1,0.00,0.00,0.00,'1',0.00,0.00,
    0.00,:GLOBAL.ITEM_PRICE1,:GLOBAL.ITEM_PRICE1,0.000,0.000,0.000,0.000,1,:IM_NEW_ITEMS.USER_ID,:IM_NEW_ITEMS.USER_DATE);
    standard.commit; -- NEW COMMITED
    clear_message; -- NEW COMMITED
         WHEN FORM_TRIGGER_FAILURE THEN
         SHOW_MESSAGE('Error : '||SQLERRM);
    RAISE FORM_TRIGGER_FAILURE ;
    WHEN OTHERS THEN
    SHOW_MESSAGE('Error : '||SQLERRM);
    RAISE FORM_TRIGGER_FAILURE ;
    END;
    Best regards
    Jamil

Maybe you are looking for

  • IPhone and Windows 7 64 Bit - syncing issues

    Hi, Just wondering if anyone is able to help. I have updated to Windows 7 and am having problems syning my iPhone. It comes up with a multitude of errors but the most common is: 'The iPhone "Michael's iPhone" can not be syned. The required file can n

  • Can't back up iPhone 5 to my computer

    Can't back up my iPhone 5 to my computer using iTunes. The "back up now" or "Restore" bottons are grey

  • Crystal Reports with SAP R/3 FM and Transparent Tables

    Hello Everybody, Can somebody tell me how can we use R/3 FM and Tables in Crystal reports? Can you send in some documentation if you have. And explain to me in detailed steps please. Your help is greatly appreciated as I am in need of some good help.

  • I cant log in and my mom is still paying for it

    Im crying  i cant log in i no my U.N but not my Pass!!!! I changed it and now i cant log in on my ipod!!! not my mom is wasting her money on something dumb and pointless cause i cant even get in!!!!!!!!!!!! HELPPPPPPPPPPPP   Spoiler (Highlight to rea

  • Error but network works. Why?

    Goodmorning. During the boot of arch, an error occurs: my IP number: error fecthing interface information:device not found. Before, during the network module load, warning appears. But after boot finalizes, network works fine. Why occur the error mes